Jammu And Kashmir Small Scale Industries Development Corporation Limited has published Rate Contract For Hospital Furniture. Submission Date for this Tender is 21-05-2021. Coats and Jackets Tenders in Sanat Ghar Bemina Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Apr-2021 | DATE | Date | 05-05-2021 |
| 2 | 06-May-2021 | DATE2 | Date | 21-05-2021 |
| Description: Rate Contract for Hospital Furniture | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | ICU Bed Electric (ABS Platform, Panels & Side Railings):\nFrame work made of Rectangular CRCA Tube of 50mm x 30 mm x 1.6 mm thick\nABS Mattress platform in four sections \nBack Rest, Knee Rest, TB/RTB and Hi-Lo Positions obtained by electric actuator operator by hand remote system \nABS moulded head and foot bows \nABS track away safety side Railing \nTelescopic IV Rod with Two Locations \nBed Mounted on 125 mm Dia Castor with central Braking system \nOverall Size: 2080 to 2090 L x 910W x 460 -700H MM.\n Finish: Pre-treated & Epoxy Powder Coated\n | 1 | No | |
| 2 | 2 | ICU Bed Electric (M.S Platform, ABS Panels & ABS Side Railings):\nAdvance linear actuator system [04Pcs Motor, 01 Pc Control box, 01 Pcs Handset].\nFour Pieces individual Side-rails, ABS Moulded.\nABS Head &Foot Panel with locking & Corner buffer.\nFramework Made-up of M.S Tubes.\n4 section top made-up of Oval perforated CRCA M.S. Sheet.\nBed mounted on 5” Central locking Castors, Durable & quite.\nS.S Telescopic I.V.Rod with 2 Hook & at 4 locations.\nHolder for Urine Bag.\nFinish: Pre-treated & Epoxy Powder Coated.\nOverall Size: 2080 to 2090 L x 910W x 460 -700HMM\nPositions Obtained function by Hand Remote.\nHi-low.\nBackrest elevation.\nKnee rest elevation.\nTrendlenburg/Reverse Trendlenburg.\n | 1 | No | |
| 3 | 3 | ICU Bed Mechanically. ABS Panels/ S.S Panels.\nFrame work made of Rectangular CRCA Tube of 50 mm x 30 mm (1.6 mm thick)\n4 Section Top made of perforated CRCA sheets, 1.25 mm thick \nBack Rest, Knee Rest, TB/RTB and Hi-Lo positions Maneuvered by Separated screw from Foot End ABS Panels/S.S Panels \nCollapsible / Swing always safety side Railing \nTelescopic IV Rod with Four Locations \nBed Mounted on 125 mm Dia Castor Two with Brakes \nOverall Size: 210 L x 90W x 60 -80 H cms\nFinish: Pre-treated & Epoxy Powder Coated.\n | 1 | No | |
| 4 | 4 | Hospital Fowler Bed (ABS panels & ABS plate form):\nFrame work made of Rectangular M.S Tube made of 50 mm x 30 mm (1.6 mm thick)\nABS Mattress platform in 4 sections \nBack Rest, Knee Rest, Positions Maneuvered by Separate screw from Foot End \nABS molded Head and Foot bows \nCollapsible safety side Railing \nTelescopic IV Rod with Two Locations \nBed Mounted on 125 mm Dia Castor two with Brakes\nOverall Approx. Size: 2080 to 2090 L x 910 W x 600 H MM\nFinish: Pre-treated & Epoxy Powder Coated.\n | 1 | No | |
| 5 | 5 | Hospital Fowler Bed (ABS panels):\nFrame work made of Rectangular M.S Tube made of 50 mm x 30 mm (1.6 mm thick)\n4 Section top made of Oval/Dimple perforated M.S Sheet 1.2 mm thick.\nBack Rest, Knee Rest, Positions Maneuvered by Separate screw with foldable Handle from Foot End \nABS molded Head and Foot Panels.\nFour locations for I.V Rod.\nBed Mounted on 125 mm Dia Castor two with Brakes\nOverall Approx. Size: 2080 to 2090 L x 910 W x 600 H MM\nFinish: Pre-treated & Epoxy Powder Coated.\n | 1 | No | |
| 6 | 6 | Hospital Fowler Bed (S.S Panels)\n Frame work made of Rectangular M.S Tube made of 50 mm x 30 mm (1.6 mm thick)\n4 Section top made of Oval/ Dimple perforated M.S Sheet 1.2 mm thick.\nBack Rest, Knee Rest, Positions Maneuvered by Separate screw with foldable Handle from Foot End \nStainless Steel Head & Foot Panel with laminated board.\nFour locations for I.V Rod.\nBed Mounted on 125 mm Dia Castor two with Brakes\nOverall Approx. Size: 2080 to 2090 L x 910 W x 600 H MM\nFinish: Pre-treated & Epoxy Powder Coated.\n | 1 | No | |
| 7 | 7 | Hospital Semi Fowler Bed (ABS panels & ABS plate form):\nFrame work made of Rectangular M.S Tube made of 50 mm x 30 mm (1.6 mm thick)\nABS platform. \nBack Rest Position Maneuvered by screw with foldable Handle from Foot End \nABS molded Head and Foot bows \nFour locations for I.V Rod.\nBed Mounted on 125 mm Dia Castor two with Brakes\nOverall Approx. Size: 2080 to 2090 L x 910 W x 600 H MM\nFinish: Pre-treated & Epoxy Powder Coated\n | 1 | No | |
| 8 | 8 | Hospital Semi Fowler Bed (ABS panels & M.S Platform):\nFrame work made of Rectangular M.S Tube made of 50 mm x 30 mm (1.6 mm thick)\n2 section top made-up Oval/ Dimple perforated M.S Sheet 1.2 mm thick.\nBack Rest Position Maneuvered by screw with foldable Handle from Foot End \nABS molded Head and Foot bows \nFour locations for I.V Rod.\nBed Mounted on 125 mm Dia Castor two with Brakes\nOverall Approx. Size: 2080 to 2090 L x 910 W x 600 H MM\nFinish: Pre-treated & Epoxy Powder Coated\n | 1 | No | |
| 9 | 9 | Hospital Semi Fowler Bed (S.S panels & M.S Platform):\nFrame work made of Rectangular M.S Tube made of 50 mm x 30 mm (1.6 mm thick)\n2 section top made-up Oval/ Dimple perforated M.S Sheet 1.2 mm thick.\nBack Rest Position Maneuvered by screw with foldable Handle from Foot End \nStainless Steel Head & Foot Panel with laminated board.\nFour locations for I.V Rod.\nBed Mounted on 125 mm Dia Castor two with Brakes\nOverall Approx. Size: 2080 to 2090 L x 910 W x 600 H MM\nFinish: Pre-treated & Epoxy Powder Coated\n | 1 | No | |
| 10 | 10 | Hospital Semi-Fowler Bed with ABS Panel\nFrame work of strong and precise Steel tube, mounted on 120mm dia castors,2 with breaks, having two sections top of perforated CRCA Sheets of 1.25mm thick duly machine press bent with mattress guards. ABS panels mounted head and foot bows back rest section maneuvered by crank mechanism from foot end. Provision for four locations I.V.\nRod overall size 203 x 90W x 60H cms\nPre treated& Epoxy powder coating finish\n | 1 | No | |
| 11 | 11 | Bed Side screen\nWith four folds shall be made from 2.5cms x 18G pipe having 198 cms height with 5 cmsdia sheets. Each Frame size shall be 61 cms wide with curtains cloth. Size 244 x 168 cms with two castors dia 5 cms. Spring wire shall be fitted at top and bottom in each frame.\n | 1 | No | |
| 12 | 12 | Hospital Ward Bed Plain:\nTubular Head and Foot Bows of unequal height with vertical tube support.\nFrame work made of Rectangular M.S Tube (1.5 mm thick)\nTop made-up of Oval/Dimple perforated CRCA M.S. Sheet (1 mm Thick)\nLegs fitted with PVC Stumps.\nFour locations for I.V Rod.\nOverall Approx. Size: 2080 to 2090 L x 910 W x 600 H MM\nFinish: Pre-treated & Epoxy Powder Coated\n | 1 | No | |
| 13 | 12.01 | HOSPITAL WARD PLAIN BED\n198cmsx93cms(Length x Width) and 61 cms height from floor. Main Frame of Pipe 4cms x 18G, with mattress guard, Air circulated perforated CRCA 20G Sheets Top with 20 cavity holes shall be provided below the sheet, tabular head and bow down of unequal Height with four vertical tube supports of 2.5 cms x 20 G pipe, on rubber shoes, provision for four I.V Fluid (Saline) locations. The bed frame shall be fitted to head and foot bow with help of brackets of 2.5mm thickness.\nPre treated& Epoxy powder coating finish.\n | 1 | No | |
| 14 | 13 | Pediatric bed:\nOverall Size: 137 L x 76 W x 60 H cms\nMain frame of rectangular pipe, perforated CRCA sheet top 1.2 mm thick perforated, tubular head & foot bows of equal height with vertical tube supports on 100 mm dia castors, drop down safety side railings are provided, pre-treated & Epoxy Powder Coating finish.\n | 1 | No | |
| 15 | 14 | Attendant Bed cum Chair:\nMS Tubular frame work of 1.5 mm thick, mounted on two 10 cm castors\nPre treated & Epoxy Powder Coated Finish \nOverall Size : (188L x 50L x 40H cms)\n | 1 | No | |
| 16 | 15 | Saline Stand (M.S):\nM.S. Tubular Pipe 1 ¼ dia of 18 G thick.Five legs Plastic Base 5cms castors.S.S. adjustable I V rod with double hook. Pre-treated and Epoxy Powder coated.\n | 1 | No | |
| 17 | 16 | Saline Stand (S.S):\nS.S. Tubular Pipe 1 ¼ dia of 18 G thick. Five legs Plastic Base 5cms castors. S.S. adjustable I V rod with double hook.\n | 1 | No | |
| 18 | 17 | Bed side screen (3 panels):\na).* Bed Side Screen (3 Folds) With Curtains (66”H x 96”L)\n * Tubular frame work of 18 G, CRCA, mounted on 5cms castors with curtain hook & curtain \nsprings. Pre-treated and Epoxy Powder Coated.\n \n | 1 | No | |
| 19 | 17.01 | b). * Bed Side Screen (4 folds) shall be made from 2.5cm x 18G | 1 | No | |
| 20 | 18 | Double Step Stool\nSize 51 x 45 x 20cms Steel tubular framework (18G pipe) with Aluminium treads flats. M.S Tubular frame. Legs fitted with rubber shoes. Pretreated and Epoxy Powder Coated.\n | 1 | No | |
| 21 | 19 | Bed Side Locker (Deluxe):\nSize : (16"Lx 16"W x 32"H) \nLocker machine pressed from 20 SWG CRCA Sheet with all three sides closed, having one box & a drawer.*S.S. top with raised edges. Mounted on two 5cms dia swiveling castors two PVC stumps. *Epoxy Powder Coated.\n | 1 | No | |
| 22 | 20 | Bed Side Locker (S.S.Deluxe):\nSTAINLESS STEEL 304 GRADE BED SIDE LOCKER WITH DRAWER AND S.S TOP.OVERALL SI OVERALL SIZE: 41 Cms x 41 Cms x 81 Cms (H) + 1 Cms.The manufacturing should be of machine press bent S.S Sheet of 304 Grade of 0.8 mm thickness cabinets, provided with three louvers of .75 + 5 mm length on the press lock door, for ventilation.Top: Should be made of S.S 304 grade and without any sharp edges, to be provided with raised rounded edges on three sides that act as guard rails.Locker Body: Made of S.S of 304 Grade of 0.8 mm thick sheet. The locker body should contain one drawer working on roller slides and one locker cabinet. Between the locker cabinet and drawer, there should a shelf with front open. The body of locker should be 405 x 405 x 710 mm approx.Cabinet Door: Made of S.S Sheet of 304 Grade of 0.8 mm thick, press bent on all the four sides to give channel shape for strength and is bent to give push/pull handle self-form, with push catch to hold door. Front Legs: The front of the locker should have legs mounted on rubber stumps. The legs should be made of 40 mm x 40 mm x 18 SWG S.S tubes.Rear Castors: The locker should have Twin Type rear nylon castors of 50 mm dia, for mobility.All S.S material should be fully polished to provide Hair line finish on Top & matt S.S finish in rest all the parts.\n | 1 | No | |
| 23 | 21 | Bed Side Locker (Standard):\n. Size: 405 L x 405 W x 810 H. MM.\n. Four CRCA M.S Pipe legs of 18 G thick fitted with PVC Stumps. \n. Box & Door made of CRCA M.S sheet 20 G thick.\n. S.S. top with raised edges.\n. Finish: Pre-treated & Epoxy Powder Coated.\n | 1 | No | |
| 24 | 22 | Hospital Bed side locker 32” height with 0.50mm thick stainless steel sheet top size 16”x16” central cabinet of size 14”x16”x12” of 18G steel with chrome plate knob. Central cabinet support 1”x16G pipe covered with rubber shoes pretreated epoxy powder coated | 1 | No | |
| 25 | 23 | Bed Side Locker (S.S ) (Standard):\nSize: 405 L x 405 W x 810 H. MM.\n. Four S.S Pipe legs of 18 G thick fitted with PVC Stumps.\n. Box & Door made of S.S 304 Grade sheet 0.8 mm thick.\n. S.S. top with raised edges.\nCabinet Door/ Box: Made of S.S Sheet of 304 Grade of 0.8 mm thick, press bent on all the four sides to give channel shape for strength and is bent to give push/pull handle self form, with push catch to hold door.\n | 1 | No | |
| 26 | 24 | Over Bed Table Fixed Height.\n. Overall approximate dimension: 42”x 18” x 36” Frame of 1” x 16g pipe with four 2” castors.. CRCA M.S Round 1” dia tubular Pipe base frame 18 G thick.\n. Mounted of four swivel castors 50 mm dia without brake.\n. Finish: Pre-treated & Epoxy Powder Coated.\n | 1 | No | |
| 27 | 25 | Emergency & Recovery Trolley (Hydraulic):\nSize: 210L x 65W CMS Height 65 to 95 CMS. Made of Heavy duty ERW Steel tube, S.S. swing away railing, S.S. telescopic saline Rod, and Storage tray and oxygen cylinder cage. \nRemovable X-Ray translucent provided with a tray for holding X-ray cassettes underneath the entire length of the stretcher. \nHeight adjustment hydraulic system, trendelenburg and reverse trendelenburg by pressure cylinder. \nFitted with 15cms dia castors-two with brakes and rubber buffers on all sides.\nPre-treated & Epoxy powder coated\n | 1 | No | |
| 28 | 26 | Patient Trolley with Fixed Cushioned 2 Section top: \nOverall Approx. Size: 201L x 56W x 81H cms \nFrame work made of Tubular CRCA Pipe of 16 gauge thick\nSwing away type Safety Side Railing. \nI.V. Rod location at two Sides, Cylinder Cage.\nTwo section foam padded top covered with Rexien Cloth.\nBrackrest Adjustable • Trolley mounted on 15cms Dia castors - Two with Brakes \nFinish: Pre-treated & Epoxy Powder Coated.\n | 1 | No | |
| 29 | 27 | Patient Transfer Trolleys:\n * Size: (201L x 56W x 81H cms) \n * Frame work of CRC tubes mounted on 15cms castors. \n * Removable stretcher top with chrome plated handle, 18 gauge aluminum sheet.\n * Pre-treated and Epoxy powder coated finish without mattress.\n | 1 | No | |
| 30 | 28 | Patient Trolley with Fixed Cushioned 2 Section top: \nOverall Approx. Size: 201 L cms x 2.5 feet W x 81 H cms \nFrame work made of Tubular CRCA Pipe of 16 gauge thick\nSwing away type Safety Side Railing. \n I.V. Rod location at two Sides, Utility Tray, Cylinder Cage\nTwo section foam padded top covered with Rexien Cloth. \nBrackrest Adjustable • Trolley mounted on 15cms Dia castors - Two with Brakes \nFinish: Pre-treated & Epoxy Powder Coated.\n | 1 | No | |
| 31 | 29 | Hospital Wash Basin Stand (Double):\nFive legs base mounted on 5cms dia castors.\nWith Two Approx. 35 cms S.S Basin.\nVertical SS tube made of 25mm x 18G.\nBasin holder SStube/ SS Round Bar.\n | 1 | No | |
| 32 | 30 | Hospital Wash Basin Stand (Single):\nFive legs base mounted on 5cms dia castors.\nWith One Approx. 35 cms S.S Basin.\nVertical SS tube made of 25mm x 18G.\nBasin holder SStube/ SS Round Bar.\n | 1 | No | |
| 33 | 31 | Crash Cart Cum Defibrillator Trolley (S.S):\nCrash cart will be all SS.\nTop shelf should be with blunt edges.\nRailing will be thicker.\nThere will be SS Rods at the bottom to keep I.V- fluid bottles.\nBoard at the back should be slided from sides.\nThere will be only two drawers one with 3- partitions & 6” deep for medicines & the second drawer be 8” deep to hold ambu bags & accessories of defibrillators\nHeight upto shelf should be 95 cms. Total Height 150 cms\nTop shelf width should be 60 cms.\nMain Frame made of SS Round 1” dia 18G pipe. \n | 1 | No | |
| 34 | 31.01 | Crash Cart Trolley S.S :\nCrash cart trolley overall size L 940mmx W 490mm x W 1535mm S.S Tubular frame size removable plastic bins and two polystyrene lockable storage units with 3 drawers each 4 swivel castors 150mm Dia two brakes complete with corner buffer powder coated oxygen cylinder carrier SS I.V Rod and shelves cardiac massage board. \n | 1 | No | |
| 35 | 32 | Garbage Transportation Trolley:\nLength 36”, height 36”, width 24” made up of CRCA M.S pipe of 1” x 16G\nCastor 6” x 1 ½” two no’s revolving front & two no’s fixed back castors 6” 1 ½” fixed with aluminum sheet inside trolley on all sides and base with epoxy paint of same colour as outside Epoxy paint of black/ yellow/Red colour .\n | 1 | No | |
| 36 | 33 | Examination Couch with cabinet & drawers:\nOverall size: 187L x 51W x 81H cms.\nBackrest: 45L x 51W cms.\nMain Frame: 138L x 51W cms\nMade from C.R.C.A. sheet of 1 mm thick and machine pressed.\nEasy and instantaneous tilt of backrest section with the help of Gas spring system.\nFoam padded, upholstered top for patient comfort.\nCabinet in lower section for storage of medicines, bandages etc., using sliding doors for maximum utility within limited space.\nThree drawers in upper section and swinging tray for B.P. apparatus.\nEpoxy Powder Coated finish\n | 1 | No | |
| 37 | 34 | Folding Stretcher:\nAluminum Folding Stretcher (Canvas) (213Lx56W x 15H cms) \nAluminum tubular bars fitted with Canvas top. \nMetal cross supports. \nLegs fitted with PVC stumps. \nPre-treated and Epoxy Powder coated finish lengthwise as well as widthwise.\n | 1 | No | |
| 38 | 35 | Labour Table Room Bed (Electric)\nOverall size: 1880Lx660Wx600-800H MM.\nTubular frame work mounted on 125mm dia central locking castor.\nThree section top made of Bakelite sheet covered with 3 section mattress.\nTrendelenburg/Rev. Trendelenburg positions height adjustment, back section adjustment through electronic actuator system. \nLeg end section can slide under the main section. \nHeight adjustable a pair of Foam padded knee crutches \nDetachable S.S tray.\nABS Head Panel.\n | 1 | No | |
| 39 | 36 | Obstetric Labour Table Telescopic (Adjustable Height):\nApprox. Dimensions" 72" L x 27"W x 24"-32"H.\nTubular frame work mounted on swiveling castors \nBakelite Sheet top in three sections with three section mattress \nTrendelenburg/Rev. Trendelenburg positions adjustable by crank system from back end. \nHydraulically height adjustable by foot paddle from side. \nBackrest section adjustable on crank mechanism.\nLeg end section can slide under the main section. \nHeight adjustable a pair of Foam padded knee crutches \nPre treated& Epoxy powder coated\nDrop down Railing are provided on 3 sides of table.\n | 1 | No | |
| 40 | 37 | Obstetric Delivery Bed in 2 parts (2 Section top):\nApprox. Dimensions: 72"L x 30" W x 30"H.\nTubular frame work made in two sections. \nBody Section with legs mounted on PVC stumps. \nLeg section on swivel castors with brakes.\nTwo section cushioned top. \nHeight adjustable a pair of knee crutches.\nPre treated& Epoxy powder coated\n | 1 | No | |
| 41 | 38 | Obstetric Delivery Table (3 Section top):\nApprox. Dimensions: 72"L x 22"W x 30"H \nRectangular & square tube frame work mounted on PVC stumps \nThree sections cushioned top. \nBackrest, Seat, Leg section adjustable by hand lever.\nComplete with SS bowls \nHeight adjustable a pair of knee crutches.\nPre treated& Epoxy powder coated.\n | 1 | No | |
| 42 | 39 | Examination Table Plain:\nSize : 180 x 60 x 80 cms\nFrame work of CRCA tubes. 50mm x 30mm x 1.6mm thick\nLegs fitted with PVC stumps. \n5cms foam cushioned top covered with rexine. \nPre-treated and Epoxy Powder coated.\n | 1 | No | |
| 43 | 40 | Examination Table (2 Section):\nApprox. Dimensions : (72 '' L x 24'' W x 32'' H)\nCRCA tubes of 50mm x 30mm x 1.6mm thick \nLegs fitted with PVC stumps. \nTwo Sections Cushioned top.\nAdjustable Back Rest by hand lever.\nLegs fitted on PVC stands. \nPre treated& Epoxy Powder coated.\n | 1 | No | |
| 44 | 41 | Gynae Examination Table (Plain):\nSize : 180 x 60 x 80 cms\nFrame work of CRCA tubes. CRCA tubes of 50mm x 30mm x 1.6mm thick \nLegs fitted with PVC stumps. \n5cm foam cushioned top covered with rexine with perineal cut. \nAdjustable lithotomy poles with straps. \nPre-treated and Epoxy Powder Coated finish\n | 1 | No | |
| 45 | 42 | Examination (table) Couch \nSteel bed made of 2”x1” rectangular pipe having dimensions 72”x24”x30” with seat of 12mm ply and foam covered with raxine , legs fitted with rubber suac pretreated epoxy powder coated \n | 1 | No | |
| 46 | 42.01 | Examination Table 3 Section:\nOverall Size: 180L x 60W x 81H cms. CRCA tubes of 50mm x 30mm x 1.6mm thick \nFrame work made of Rectangular \n5 cm foam cushioned top covered with rexine with perineal cut. \nLegs fitted with PVC Stumps \nBack Rest & leg rest section Adjustable on Ratchet / Lever \nFinish: Epoxy Powder Coated\n | 1 | No | |
| 47 | 43 | Kick bucket:\nStainless Steel Kick Bucket (12"x 14") with Basin\nM.S. Tubular frame work mounted on 5cms castors. \n*With 35cms dia S.S. basin. *Pre-treated and Epoxy Powder coated.\n | 1 | No | |
| 48 | 44 | Soiled Linen Trolley for holding dustbins (60) liters Capacity (SS):\n * Frame work of SS pipe 1” x 18G mounted on 100 mm dia castors four no’s with\n Push handle at one end.\n | 1 | No | |
| 49 | 45 | Soiled Linen Trolley for holding dustbins (60) liters Capacity (M.S):\n Frame work of CRCA M.S pipe 1” x 18G mounted on 100 mm dia castors four no’s with Push handle at one end. \nPre-treated & Epoxy powder coated\n | 1 | No | |
| 50 | 46 | Linen Change Trolley:\nCRCA of 16G, Tubular frame mounted on 10 cms Dia castors \nThree shelves made of MS sheet \nA canvas Bag fitted on front side \nEpoxy Powder Coated Finish\n | 1 | No | |
| 51 | 47 | Soiled linen trolley with canvas bag:\n * Soiled Linen Trolley with canvas Bag (91H x 51 cm dia.) with push handle\n * Frame work of CRC, 16G, tube mounted on 10cms castors.\n* Superior quality canvas bag.\n * Pre-treated and Epoxy powder coated finish\n | 1 | No | |
| 52 | 48 | Cylinder trolley: \nTubular frame work of CRCA 16G\nTwo 10 cms castors \nCRCA sheet base plate of 3 mm thick \nPre- treated and Epoxy powder coated finish \nA - For small cylinder \nB- For large cylinder\n | 1 | No | |
| 53 | 49 | Foot Step Double:\n * CRCA Tubular legs, 16 G, fitted with PVC stump. \n * CRCA top fixed with aluminum beadings. \n * Pre-treated and Epoxy Powder Coated.\n | 1 | No | |
| 54 | 50 | Foot Step Single:\n * CRCA Tubular legs, 16G, fitted with PVC stump. \n * CRCA top fixed with aluminum beadings. \n * Pre-treated and Epoxy Powder Coated.\n | 1 | No | |
| 55 | 51 | Patient Stool Revolving Cushioned Top:\n * CRCA Tubular four legs, 16 G, fitted with PVC stumps. \n * Foot ring supports. \n * 18" to 27" adjustable height with cushion top, through screw. \n * Pre-treated and Epoxy Powder Coated. \n | 1 | No | |
| 56 | 52 | Patient Stool Revolving S.S.Top:\n * CRCA Tubular four legs, 16G, fitted with PVC stumps. \n * Foot ring supports. \n * 15" to 24" adjustable height with cushion top, through screw. \n * Pre-treated and Epoxy Powder Coated. \n | 1 | No | |
| 57 | 53 | Monitor Trolley:\nOverall approx. size 800 mm L x 600 mm W x 1408 mm H. \nOne drawer & 4 shelves \nOxygen cylinder cage & I.V Rod.\nMounted on 125 mm casters \n# Switch & socket panel for medical Equipment \nEpoxy powder coated\n | 1 | No | |
| 58 | 54 | Medicine Trolley with 4 Drawers:\nHospital Medicine Trolley with 4 Drawer \nSize:- 76L x 46W x 81 H cms\nFrame work of square CRCA tubes 16 gauge thick mounted on 10cms castors. \nTwo S.S. shelves with three side railing on top shelf. \nTwo drawers under the each shelf.\nPre-treated and epoxy powder coated finish\n | 1 | No | |
| 59 | 55 | Dressing Trolley (76 L x 46 W x 81 H cms):S.S:\nMain frame made of SS Round Tubular Pipe 1” dia of 16G\nMounted on 10 cms.Castors.\nTwo SS Shelf with four side railings.\nProvision for Holding the Bowl and Bucket.\n Push handle at the one end of the dressing trolley.\n | 1 | No | |
| 60 | 56 | Instrument trolley (2 Shelves with 4 side railing):SS:\n Instrument Trolley mounted on 7.5cms castors. \nMain frame made of SS Round Tubular Pipe 1” dia of 16G\n Two S.S. shelves with three side railing on top shelf. \n Size: - 76 L x 46W x 81 H cms. \n | 1 | No | |
| 61 | 57 | Instrument Mayo Trolley over the OT Table (Mechanically); SS \nMain frame made of SS tubular Pipe.\nApprox Tray S.S Size: 91 L x 50 W cms\nmounted on 10 cms castors \nHeight adjustable by gear handle \n | 1 | No | |
| 62 | 58 | Mayo's Instrument Trolley with S.S. tray:\nMayo's Instrument Trolley with S.S. Tray \n * (Tray size: 56Lx40W cms)\n * Rectangular SS (16 gauge) tubes mounted on 5cms castors, height \n Adjustable bed-side Knob. \n * Pre-treated and Epoxy Powder Coated finish\n | 1 | No | |
| 63 | 59 | Mayo's instrument trolley (Mechanically):\nS.S tray size: 76 x 40 Cms. \nSS tubes, 16 G, mounted on 5 Cms. Castors \nHeight adjustable by gear handle \n | 1 | No | |
| 64 | 60 | Instruments Trolley,\nSize 91 x 86 x 46 cms.Two Stainless Steel shelves with SS Rails to cover three sides of top shelf and four sides of bottom. Frames of CR,ERW tubular steel, on four 5 cm Swivel Castors. Pretreated, Epoxy Finish\n | 1 | No | |
| 65 | 61 | Invalid wheel chair Folding (Detachable Armrest & Footrest):\nInvalid Wheel Chairs Folding (Special Model)\n * Size :- (42" L x 26"W x 36"H) \n * 17" Seat with Fixed armrest, front with 5" Solid with brakes\n | 1 | No | |
| 66 | 61.01 | Invalid wheel Chair Rigid\nSizes 67w x 110d x 94h cms. ERW steel tubular frame work fitted with metal seat and back. Adjustable foot rests, solid rubber tyre wheels fitted with self propelling hoops and brake arrangements.20 cm dia. Swiveling Castor wheels in front\n | 1 | No | |
| 67 | 62 | Patient Attendant Stool:\n. Approx. Size 12”x12”x20”H\n. Top made of SS Sheet.\n. Legs made of 25 mm x 18G & horizontal support of 19 mm x 18G CRCA tube fitted with PVC\nStumps.\n. Finish: Pre-treated & Epoxy Powder Coated\n | 1 | No | |
| 68 | 63 | Patient Attendant Stool Round Top (M.S):\n. Main frame made of CRCA square pipe 19 mm x 1.5 mm machine bended.\n. Round Top made of CRCA 20 G thick die pressed.\n. Height of Stool 20”.. Finish: Pre-treated & Epoxy Powder Coated.\n | 1 | No | |
| 69 | 64 | Patient Attendant Stool Round Top (S.S):\n. Main frame made of SS square/round pipe 19 mm x 1.5 mm machine bended.\n. Round Top made of SS 20 G thick die pressed.\n. Height of Stool 20”.\n. Finish: Stainless steel.\n | 1 | No | |
| 70 | 65 | Hospital Full-Fowler/ ICU Bed (ABS Panels)\nFrame work made of rectangular CRCA tube 50mm x 30mm (1.6mm thick).mounted on 125mmdia castors, 2 with breaks. Four section top made of perforated CRCA Sheets of 1.25mm thick, back rest section positions maneuvered by screw from foot end. ABS moulded head and foot bows. Location for four I.V. Rod. Overall size 206L X 90W X 60H cms\nPre treated& Epoxy powder coating finish.\n | 1 | No | |
| 71 | 66 | Revolving Stool Three legged\nWith M.S tubular framework 2.5 cms x 20G Pipe screw based height adjustment from 7 to 68 cms SS revolving top. Legs fitted with rubber shoes\n | 1 | No | |
| 72 | 67 | Critical Patient’s Trolley\nWith removable stretcher 80” x 22” X 32” (overall size) Trolley frame of 1” x 16g pipe mounted with large castors ( diameter 150 mm) with braking and steering facility and foldable to adjustable in ambulances. Removable stretcher frame of 1” x 16g pipe with 20g aluminium sheet giving uniform depression towards the center. Stretcher handles chrome plated\nPre treated& Epoxy powder coating finish\n | 1 | No | |
| 73 | 68 | Hospital locker pigeon Hole\nHospital locker pigeon hole size 78” x36” x18” with 12 pigeon holes having individual locking arrangements and knobs made from 22g sheet.\n | 1 | No | |
| 74 | 69 | Wash Basin Stand\nSingle with basin standard size made from 1” x 14” GERW tubes. Metal cross bars and canvas top.\n | 1 | No | |
| 75 | 70 | Oxygen gas cylinder trolley\nPush type having 42” height made from 1” x 16g pipe. Fitted with two 4” dia wheels with rubber.Base plate 2.5mm thick.\n | 1 | No | |
| 76 | 71 | Perforated steel bench\nMounted with three perforated seats, Legs fitted with rubber shoes, pretreated and Epoxy Powder Coated\n | 1 | No | |
| 77 | 72 | Three Seater bench Superior quality\nChrome plated with cushioned seat and back having side arm rests\n | 1 | No | |
| 78 | 73 | Racks For Medicines-I\nWith slotted steal angle post of 35 x35 x 3mm having holes 10mm dia provided at 50mm centers. Shelves shall be made of 1mm thick sheet with lipped flanges of 3mm width and 15mm depth. Eight gussets, four on each face of the rack shall be fitted. Thickness of gussets shall not be less than 1 mm and length 75mm enamel finish.\nSize 810 x 380 x 760mm with six shelves.\n | 1 | No | |
| 79 | 73.01 | Racks For Medicines-II\nWith slotted steal angle post of 35 x35 x 3mm having holes 10mm dia provided at 50mm centers. Shelves shall be made of 1mm thick sheet with lipped flanges of 3mm width and 15mm depth. Eight gussets, four on each face of the rack shall be fitted. Thickness of gussets shall not be less than 1 mm and length 75mm enamel finish.\nSize 810 x 380 x 1980mm with six shelves.\n | 1 | No | |
| 80 | 74 | Patient Transfer Trolley:-\nPatient weight bearing capacity of 170 Kg minimum made of stainless steel and rust proof materials, dimensions length 190cms and width 75cms. Convenient to move in all directions with sturdy swiveling castors and locking device for wheels. Hands free pneumatic/hydraulic assist positioning for height adjustment, trendleburg and reverse trendelenberg positions. Provision for quick release of elevated head end. Tuck away/fold down adjustable light weight safety side Rails with self locking mechanism. Foot end panels should have holding bracket for transport ventilator and transport monitor. Head end panel should have holding bracket for patient files and record sheets. One oxygen Cylinder bracket and utility tray beneath mattress base. Stainless steel adjustable I.V Drop rod with double holding hooks I.V drip rod holding position one at each corner of trolley. Pushing rubberized bumper handle at both ends. P.U foam mattress.\n | 1 | No | |
| 81 | 75 | Anesthesia Drug Trolleys:-\nBody should be made of ABS Plastic, should have vertical rows of 5-6 drawers with label holders, side by side to hold anesthesia drugs, I/V fluids and I/V access equipment etc. Drawers should be lockable with single lock for top most drawers on each. Should have approximate dimensions 850x520x950mm. Should have at least 8 small bins side by side on the top to hold ampoules of emergency drugs. Should have polyurethane noiseless castors two of them with brakes. Should have waste bins fixed on two sides. Should have rust proof stainless steel guard rail.\n | 1 | No | |
| 82 | 76 | ATTENDENT BED\nDescription:-\nFramework made of rectangular/ square M.S tube.\n50 mm (2”) Foam padded Fixed mattress covered with good quality Rexine.\nLegs fitted with PVC Stumps/ shoes.\nFinish: Pre-treated & epoxy Powder coated.\nOverall size; 1840L x 600W x 500h MM.\n | 1 | No | |
| 83 | 77 | BEDSIDE LOCKER (ABS)\nDescription:\nABS Body Bed side Locker with Cupboard and drawer with ABS Top.\nMounted on 50 mm (2”) wheels.\nTowel stand available both sides.\nAvailable in knock down construction.\nOverall Size: 480L x 480W x 800H mm\n | 1 | No | |
| 84 | 78 | OVERBED TABLE (Pneumatically adjustable)\nDescription:\nPoly Propylene (PP) top with raised edges on all sides.\nAluminum extruded telescope section fitted with gas spring for height adjustable from approx. 790mm to 1070mmMild steel base frame covered with durable haigh impact poly propylene (PP) base cover.\n Mounted on 50 mm (2”) wheels.\nFinish: Pre-treated & epoxy Powder coated.\nOverall size: 890L x 435W x 28H mm.\nTop size: 880L x 435W x 28H mm.\n | 1 | No | |
| 85 | 79 | OVERBED TABLE (By Knob adjustable)\nDescription:\nPoly Propylene (PP) top with raised edges on all sides.\nTelescopic rectangular frame work for height adjustable from approx. 750mm to 1050mm.\nMounted on 50 mm (2”) wheels.\nFinish: Pre-treated & epoxy Powder coated.\nOverall size: 1000L x 435W x750 - 1050H mm.\nTop size: 880L x 435W x 28h mm\n | 1 | No | |
| 86 | 80 | OVERBED TABLE (Fixed)\nDescription:\nPoly Propylene (PP) top with raised edges on all sides.\nTubular Framework mounted on 50mm (2”) wheels.\nFinish: Pre-treated & epoxy Powder coated.\nOverall size: 1060L x 435W x 1060H mm.\nTop size: 880L x 435W x 28h mm.\n | 1 | No | |
| 87 | 81 | AMBULANCE STRETCHER\nDescription:\nLight weight and strong structure made up of high quality aluminium alloy.\nThe Stretcher mattress is made of soft sponge mattress, which make patient feel comfortable.\nOne medical staff can push the trolley onto the ambulance or send to ward.\nWhen need low position, pull out the safety handle & then press it, the stretchers height will automatically lower down.\nWhen destination arrived, pulling out the safety handle, the stretcher’s legs will unfold automatically.\nThere are the return elastic look device at both side of the stretcher & the leg parts. Lock tightly when turn up for patient safety, turn down for patients out.\nPressing the button under the stretcher, the head part will be raised or lowered.\nDimensions:\nProduct size:\n High position: 1930L x 550W x 850H mm\n Low position: 1900L x 600W x 240W mm\nAngle of the Backrest: 75o\nLoad Bearing : less than 159kg\n | 1 | No | |
| 88 | 82 | AMBULANCE STRETCHER CUM WHEELCHAIR\nDescription:\nIt is made of high –strength aluminum alloy thick- wall pipes.\nThe bed surface is made of foamed cushion & the adjustable back making the wounded feel comfortable.\nThe mechanical foldaway legs are controlled by one handle on one end of the stretcher. And the legs can be folded under the stretcher when loading into the vehicle.\nThis type of stretcher is characterized by its being light, durable antiseptic easy for sterilization.\nThis stretcher trolley can be converted into a chair/wheelchair; the angle of the chair can be adjusted according to your requirement.\nIt is quite suitable to transfer the patients in the limited place, like small lifts in hospital.\nDimensions:\nProduct size:\n High position: 1960L x 550W x 860H mm\n Low position: 1960L x 550W x 250W mm\nAngle of the Backrest: 85o\nLoad Bearing : less than 159kg\n | 1 | No | |
| 89 | 83 | EMERGENCY TROLLEY (ABS)\nDescription:\nFrame work made of ABS plastic body with aluminum columns. Provided with IV pole, Dustbin (2pcs), utility container, File holder, sliding side shelf, S.S rail on top, Defibrillator shelf, and Powder outlet at rear with hook, oxygen tank holder at rear, C.P.R board at rear. Centralized locking system for 2 small & big drawers; provided with adjustable inner partitions. 125 mm (5”) Diagonal locking castors.\nOverall Size (approx): 850 x 520x 950mm\n | 1 | No | |
| 90 | 84 | ANESTHESIA TROLLEY (ABS)\nDescription:\nFrame work made of ABS plastic body with aluminum columns. Provided with IV pole, Dustbin (2pcs), utility container, File holder, Multi bin containers (1 set of 4 pcs), sliding side shelf & S.S rail on top. Centralized locking system for 2 small & big drawers; provided with adjustable inner partitions. 125 mm (5”) Diagonal locking castors.\nOverall Size (approx): 850 x 520x 950mm\n | 1 | No | |
| 91 | 85 | LAPROSCOPIC TROLLEY\nDescription:\nFour shelves adjustable and one drawer.\nTrolley provided with two handle \nThe trolley mounted on 125mm (5”) Diagonal locking castors.\nProvided with Switch & socket for medical equipment along with 1 main MCB for protection.\nSupplied with S.S IV rod & MS oxygen cylinder cage.\nFinish: pre-treated and epoxy powder Coated\n Overall approx size: 889L x 735W x 1750H mm\n | 1 | No | |
| 92 | 86 | SURGEON CHAIR\nDescription:\nFixed cushioned seat &back\nHeight adjustable from 540 mm to 660 mm\nSwinging back rest and can be locked at any position\nAluminum 5 legs base with S.S foot ring\nBase fitted with 50 mm (2”) castors\n | 1 | No | |
| 93 | 87 | REVOLVING STOOL (SS TOP)\nDescription:\nFixed cushioned seat\nHeight adjustable from 510 mm to 650 mm\nlegs plastic base mounted on 50 mm (2”) castors\n | 1 | No | |
| 94 | 88 | WAITING AREA CHAIR (Set Of 3 Chairs)\nDescription:\nPerforated sheet M.S sheet\nSolid Aluminum alloy armrest and legs \nSet of 3 seats\nFinish: pre-treated and epoxy powder Coated\n Overall approx size: 1765L x 710W x 775H mm\n | 1 | No | |
| 95 | 89 | BIO MEDICAL WASTE BINS (FOOT OPERATED)\nWith SS frame (set of 4 Bins)\nAvailable in Red / Blue/ Black/ yellow colours\n20 / 30 Ltrs capacity.\n | 1 | No | |
| 96 | 90 | S/S Food Service Trolley \nThe food service trolley shall be constructed• with a strong S/S tube frame. The Trolley shall be completely insulated and the lids shall be of double plate, well insulated, and shall be provided with strong S/S hinges. When opened the lids shall be used as tables. The trolley shall be provided with four nylon swivel wheels.The trolley shall be provided with full size• bottom shelf of S/S Sheet (depressed 6 mm) for storage/racking of trays. The trolleys should be fitted with side guards• for protection. Material of Construction: S/S 304 Grade• Overall Dimensions:• Length:950mm Breadth:560 mm Height: 760mm above castor wheels Size of insulated chamber: 810mm x 340mm x• 230mm Approximate weight: 70-78 Kgs (including• wheels) Handle: 2 No’s of 25mm dia. SS round tube:• 120mm x 560mm. Bottom Plate: S/S full size depressed plate, 22• SWG. Lid: S/S insulated 40mm thick lid cum food• service counter full length hinged. Size of Wheels: 4 No’s 150 mm rubberized• nylon swiveling wheels double bearing with base\n | 1 | No | |
| 97 | 91 | S/S Food Service Trolley\nThe food service trolley shall be constructed• with a strong S/S tube frame. The trolley shall be completely insulated and the lids shall be of double plate, well insulated, and shall be provided with strong S/S hinges. When opened the lids shall be used as tables. The trolley shall be provided with four nylon swivel.The trolley should have 2 cabinets below and• each cabinet should have 2 separate doors. One of the cabinets should be dividing into 2 halves, upper half and lower half. The trolley should be fitted with side guards• for protection. Materials of Construction: S/S 304 Grade• Overall Dimensions:• Length: 950mm Breadth: 560mm Height:760mm above castor wheels Size of insulated chamber:810mm x 340mm x• 230mm Approximate weight:70-78 Kgs (including• wheels) Handle: 2 No’s of 25mm dia. SS round tube:• 120mm x 560mm. Bottom Plate: S/S full size depressed plate, 22• SWG. Lid: S/S insulated 40mm thick lid cum food• service counter full length hinged. Size of Wheels: 4 No’s, 150mm rubberized• nylon swiveling wheels double bearing with base\n | 1 | No | |
| 98 | 92 | S/S Breakfast Trolley \nBreakfast trolleys with 18 SWG S/S top, sides• consisting of 20 SWG S/S sheet, shelves of 18 SWG S/S, main frame of S.S Pipe 1”x 1” with 25 mm dia S/S pipe handle. Bottom shelf of 18 SWG S/S. The trolley shall• be mounted on heavy duty 6” dia, castor wheels 4 No’s. The trolley will have 3 drawers and 2 cabinets• below. One cabinet should occupy 3/4th space and another 1/4th space. The small cabinet should be dividing into 2 halves, upper half, and lower half. The trolley top should accommodate 2 tea• urns of 12” – 3/4th” dia with protecting S/S sheet wall around Tea urns. The nozel should face the drawers and the top• should have a depression for accommodating glasses while pouring tea and have 25mm dia. drain waste. The trolley should be fitted with side guards• for protection. Overall Dimension:• Length:850mm Width:450mm Height:900mm from floor\n | 1 | No | |
| 99 | 93 | S/S Food Service Container, \nLarge Size with Lid: Material of construction: S/S22 SWG (0.70mm• -0.80mm) Breadth: 230mm x 265mm with collar• Length: 290mm x 325mm with collar• Depth:200mm• Capacity: 12 Liters• The container should possess SS handle for• holding on the both sides. Weight of Container:1.450Kgs• Weight of Lid: 550gms approx.• Total Weight: 2Kg approx•\n | 1 | No | |
| 100 | 94 | S/S Food Service container, \nSmall size with Lid Material of construction: S/S22 SWG• (0.70mm-0.80mm) Breadth: 135mm x 162mm with collar• Length: 220mm x 265mm with collar• Depth:150mm• Capacity:4 Liters• The container should possess SS handle for• holding on the both sides. Weight of Container: 700gms approx.• Weight of Lid:250gms approx.• Total Weight: 950 approx•\n | 1 | No | |
| 101 | 95 | S/S Tea Urns\nHeavy duty tea urns made with superior quality stainless steel Capacity:10Liters\n | 1 | No | |
| 102 | 96 | S/S Tea Urns \nHeavy duty tea urns made with superior quality stainless steel Capacity: 15 Liters\n | 1 | No | |
| 103 | 97 | S/S Tea Urns \nHeavy duty tea urns made with superior quality stainless steel Capacity:20 Liters\n | 1 | No | |
| 104 | 98 | Steel Cupboard/Almirha.\nDimensions: - 2015 mm Height x 900 mm Width x 450 mm Depth. \nNumber of Shelves 4 no’s \nMade of CRCA Sheet. \nMaterial Thickness 0.8mm.\nFinish: Pre-treated & Powder Coated 60–80 micron thickness.\nStandard features. Flush handle locking with Foldable keys, Concealed Hinges without brackets. Adjustable shelves. Dual purpose shelves for Box File / Hanging files with 40 kg load carrying capacity per shelves. Levelers. Master Lock\nMaterial & Finishes. CRCA Sheet. Material Thickness - 0.8 mm\n | 1 | No | |
| 105 | 99 | Steel Cupboard/Almirha.\nDimensions: - 1335 mm Height x 900 mm Width x 450 mm Depth. \nNumber of Shelves 2 no’s \nMade of CRCA Sheet. \nMaterial Thickness 0.8mm.\nFinish: Pre-treated & Powder Coated 60–80 micron thickness.\nStandard features. Flush handle locking with Foldable keys. Concealed Hinges without brackets. Adjustable shelves. Dual purpose shelves for Box File / Hanging files with 40 kg load carrying capacity per shelves. Levelers. Master Lock\nMaterial & Finishes. CRCA Sheet. Material Thickness - 0.8 mm\n | 1 | No | |
| 106 | 100 | Steel Cupboard Glass Door/Almirha.\nDimensions: - 2015 mm Height x 900 mm Width x 450 mm Depth. \nNumber of Shelves 4 no’s \nMade of CRCA Sheet. \nMaterial Thickness 0.8mm.\nFinish: Pre-treated & Powder Coated 60–80 micron thickness.\n Standard features:- Flush handle locking with Foldable keys. Concealed Hinges without brackets. Adjustable shelves. Dual purpose shelves for Box File / Hanging files with 40 kg load carrying capacity per shelves. Levellers. Master Lock.\n | 1 | No | |
| 107 | 101 | Steel Cupboard Glass Door Sliding.\nDimensions: - 2015 mm Height x 900 mm Width x 450 mm Depth. \nNumber of Shelves 4 no’s \nMade of CRCA Sheet. \nMaterial Thickness 0.8mm.\nFinish: Pre-treated & Powder Coated 60–80 micron thickness.\n Standard features: - Plastic handle locking with Foldable keys. Smooth Sliding rails. Adjustable shelves. Dual purpose shelves for Box File / Hanging files with 40 kg load carrying capacity per shelves.\n | 1 | No | |
| 108 | 102 | Steel Cupboard Glass Door Sliding.\nDimensions: - 1335 mm Height x 900 mm Width x 450 mm Depth. \nNumber of Shelves 2 no’s \nMade of CRCA Sheet. \nMaterial Thickness 0.8mm.\nFinish: Pre-treated & Powder Coated 60–80 micron thickness.\nStandard features: - Plastic handle locking with Foldable keys. Smooth Sliding rails. Adjustable shelves. Dual purpose shelves for Box File / Hanging files with 40 kg load carrying capacity per shelves.\n | 1 | No | |
| 109 | 103 | Vertical Filing Cabinet.\nDimensions: - 1335 mm Height x 465 mm Width x 620 mm Depth. \nNumber of Drawers 4 no’s \nMade of CRCA Sheet. \nMaterial Thickness 0.8mm.\nFinish: Pre-treated & Powder Coated 60–80 micron thickness.\nStandard features: - Centralize Locking. Anti tilt Mechanism allow one drawer opening at a time for safety purpose. Smooth Full Extension Ball Bearing Runners with 40 kg load carrying capacity. Master Lock\n | 1 | No | |
| 110 | 104 | Vertical Filing Cabinet.\nDimensions: - 725 mm Height x 465 mm Width x 620 mm Depth. \nNumber of Drawers 2 no’s \nMade of CRCA Sheet. \nMaterial Thickness 0.8mm.\nFinish: Pre-treated & Powder Coated 60–80 micron thickness.\nStandard features: - Centralize Locking. Anti tilt Mechanism allow one drawer opening at a time for safety purpose. Smooth Full Extension Ball Bearing Runners with 40 kg load carrying capacity. Master Lock\n | 1 | No | |
| 111 | 105 | Steel Almirha Size.\nSize:- 6`H x 3`W x 1`D.\nNumber of Shelves 5 no’s \nMade of CRCA Sheet. \nMaterial Thickness 20 guage.\nFinish: Pre-treated & Powder Coated 60–80 micron thickness.\n | 1 | No | |
| 112 | 106 | Steel Almirha Size.\nSize:- 1218mm x 900mm x450mm.\nNumber of Shelves 3 no’s \nMade of CRCA Sheet. \nMaterial Thickness 20 guage.\nFinish: Pre-treated & Powder Coated 60–80 micron thickness.\n | 1 | No |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
