}

Repair/Maintenance Of Fire Hydrant System And Allied Works And Eot Cranes Under Ge ( N ) Bikaner At Mil Stn Bikaner, BIKANER-Rajasthan

Military Engineer Services-MES has published Repair/Maintenance Of Fire Hydrant System And Allied Works And Eot Cranes Under Ge ( N ) Bikaner At Mil Stn Bikaner. Submission Date for this Tender is 24-04-2021. Cranes Tenders in BIKANER Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

27511411
Corrigendum : Repair/Maintenance Of Fire Hydrant System And Allied Works And Eot Cranes Under Ge ( N ) Bikaner At Mil Stn Bikaner
Open Tender
Indian
Rajasthan
BIKANER
24-04-2021

Tender Details

Repair/Maintenance Of Fire Hydrant System And Allied Works And Eot Cranes Under Ge ( N ) Bikaner At Mil Stn Bikaner

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 17-Apr-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 24-04-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 37740.0 /-
Tender Value
INR 18.87 Lakhs /-

BOQ Items

Name of Work : Repair/maintenance of fire hydrant system and allied works and EOT Cranes under GE (N) Bikaner at Mil Stn Bikaner
Sl. No. Item Description Item Code / Make Quantity Units
1 1 M&L for dismantling of various components of Electrically Operated Crane of capacity ranging from 2 Ton to 10 Ton of any span of cross/long travel and height of hoist for carrying out overhauling and repairing as detailed under various items here-in-after and re-fixing the components in its position after carrying out overhauling/repair work including cleaning tracks with approved cleanser, greasing for smooth running of wheels, pulleys, steel wire rope, etc and replacing minor extras / hard ware as required, painting of crane with one coat of synthetic enamel paint of approved tint including LT, CT, etc after preparation of surfaces & writing the technical details of Crane as per existing data and load testing of crane as per relevant IS after carrying out all repair works complete all as specified and as directed.\nNotes : (i) Repair/overhauling of EOT Crane shall be carried out through authorized service agency of Original Equipment Manufacturer (OEM). The contractor shall submit documentary proof/evidence in this regard before taking EOT Cranes under repair, overhauling, etc. (ii) Make and model of part to be replaced shall be same as used/recommended by OEM. (iii) Repairing/replacement of unserviceable main components catered for separately under respective items of this Schedule shall be measured & paid for separately. (iv) Load as required for testing shall be arranged by the user/department. However, transportation of load for testing from the place of issue and return to the place of issue shall be responsibility of the contractor. (v) Contractor shall give a certificate after repair/overhauling of EOT Crane that Crane is serviceable & fully functional in all respect and ready to use for load. 4 Each Job
2 2 M&L for repair/overhauling/servicing of Gear Box of EOT Crane of following capacity including cleaning, recutting, polishing the gear teeth after remetalling and making good, remetalling of driving shaft, machining, finishing, polishing and making good for smooth running of crane, replacing worn out bushes, bearings on drive and non drive ends, reassembling all the components after necessary repair works, replacing the gear oil of the gear box upto required level, making adjustment to ensure trouble free smooth running of gear system complete all as specified and as directed.\nNotes : (i) Repair/overhauling/servicing of Gear Box shall be carried out through authorized service agency of Original Equipment Manufacturer (OEM). The contractor shall submit documentary proof/evidence in this regard before taking Gear Box under repair, overhauling, servicing, etc. (ii) Make and model of part to be replaced shall be same as used/recommended by OEM. (iii) Gear oil, ball bearing, spare parts as required shall be measured and paid for separately as 'Supply only' under respective items of this Schedule.
3 2.01 Main hoist gear box of 10 Ton EOT Crane. 1 Each Job
4 2.02 Main hoist gear box of 2 Ton EOT Crane. 1 Each Job
5 2.03 Creep hoist gear box of 10 Ton EOT Crane. 1 Each Job
6 2.04 Creep hoist gear box of 2 Ton EOT Crane. 1 Each Job
7 2.05 Cross Travel gear box of 10 Ton EOT Crane. 1 Each Job
8 2.06 Cross Travel gear box of 2 Ton EOT Crane. 1 Each Job
9 2.07 Long Travel gear box of 10 Ton EOT Crane. 1 Each Job
10 2.08 Long Travel gear box of 2 Ton EOT Crane. 1 Each Job
11 3 M&L for repair/overhauling the Thruster of following capacity of EOT Crane with gear holding breaks / Hoist / Creep / Cross travel and Long travel, rewinding the burnt out winding of electromagnetic thruster coil with super enamel copper wire of existing gauge and varnishing, heating and testing etc complete repairing of oil pump by replacing worn out parts, oil seal, ‘O’ ring and bush and bearing - 02 Nos (6201), check nuts, lock pin all as required including draining out old unserviceable oil complete all as specified & as directed :-\nNotes : (i) Repair/overhauling of Thruster shall be carried out through authorized service agency of Original Equipment Manufacturer (OEM). The contractor shall submit documentary proof/evidence in this regard before taking Thruster under repair, overhauling, etc. (ii) Make and model of part to be replaced shall be same as used/recommended by OEM.
12 3.01 Main hoist Thruster of 10 Ton EOT Crane. 1 Each Job
13 3.02 Main hoist Thruster of 2 Ton EOT Crane. 1 Each Job
14 3.03 Creep Hoist Thruster of 10 Ton EOT Crane. 1 Each Job
15 3.04 Creep Hoist Thruster of 2 Ton EOT Crane. 1 Each Job
16 3.05 Cross Travel Thruster of 10 Ton EOT Crane. 1 Each Job
17 3.06 Cross Travel Thruster of 2 Ton EOT Crane. 1 Each Job
18 3.07 Long Travel Thruster of 10 Ton EOT Crane. 1 Each Job
19 3.08 Long Travel Thruster of 2 Ton EOT Crane. 1 Each Job
20 4 Supply only Grease of required type/class for lubrication as directed. 30 Kg
21 5 Supply only gear oil (ISI marked) of required grade in the gear boxes up to specified level as directed. \nMake : IOC/SP-320/SERVOMESH-40/HP 20 Litre
22 6 Supply only Ball bearing of size 6310 suitable for 10 Ton capacity gear box for main hoist. (Make : TATA / SKF / NBC) 1 Each
23 7 Supply only Ball bearing of size 6317 suitable for 10 Ton capacity gear box for main hoist. (Make : TATA / SKF / NBC) 1 Each
24 8 Supply only Ball bearing of size 6206 suitable for 10 Ton / 2 Ton capacity EOT crane for CT. (Make : TATA / SKF / NBC) 1 Each
25 9 Supply only Ball bearing of size 6212 suitable for 10 Ton / 2 Ton capacity EOT crane for Long Travel. (Make : TATA / SKF / NBC) 1 Each
26 10 Supply only Ball bearing of size 6210T suitable for 10 Ton / 2 Ton capacity EOT crane for Long Travel. (Make : TATA / SKF / NBC) 1 Each
27 11 S&F Steel wire rope 16 mm dia, 6 x 36 construction with tensile strength of 180 Kg/Sqmm with a factor of safety of 6 suitable for lifting load of 10 Ton including greasing complete all as directed including taking down old unserviceable steel rope.\nMake : Usha / Bombay Foot / National or as used/recommended by OEM.\nNotes : (i) The steel rope shall be best performed plough straight non rotating type conforming to IS-2266. (ii) The breaking strength of the rope shall not be less than 6 time the safe working load thereon. (iii) Test Certificate of manufacturer shall be submitted by the contractor. 70 RM
28 12 S&F Steel wire rope 12 mm dia, 6 x 36 construction with tensile strength of 180 Kg/Sqmm with a factor of safety of 6 suitable for lifting load of 2 Ton including greasing complete all as directed including taking down old unserviceable steel rope.\nMake : Usha / Bombay Foot / National or as used/recommended by OEM.\nNotes : (i) The steel rope shall be best performed plough straight non rotating type conforming to IS-2266. (ii) The breaking strength of the rope shall not be less than 6 time the safe working load thereon. (iii) Test Certificate of manufacturer shall be submitted by the contractor. 70 RM
29 13 M&L for dismantling of following motors from 10 Ton / 2 Ton capacity EOT cranes, stripping out worn out bearings after dismantling including rewinding with super enameled copper wire of appropriate gauge as per existing and applying heat varnish properly with fine quality, replacement of ball bearing, insulating materials etc., and reassembling and fixing at its original position, testing complete all as specified & as directed :-
30 13.01 Slip Ring motor, 15 KW, 3 Phase, 415 Volts AC. 1 Each Job
31 13.02 Slip Ring motor, 7.5 KW, 3 Phase, 415 Volts AC. 1 Each Job
32 13.03 Squirrel cage motor, 1 to 3 KW, 3 Phase, 415 Volts AC. 2 Each Job
33 14 S&F in repair Time delay relay – electro pneumatic with 1NO + 1NC contact blocks coil voltage 110 Volt, 0.5 to 60 sec, AC, complete all as specified & as directed.\nMake : Cat Part No. “KRTPN10-1” of Make 'BCH' or equivalent in makes mentioned in Appendix 'B' here-in-after. 2 Each Job
34 15 S&F in repair Thermal over load relay of current setting range 20 - 32 Amps for 10 Ton EOT crane, complete all as specified & as directed.\nMake : Cat Part No. “3UA5800-2DZ2” of Make 'Siemens’ or equivalent in makes mentioned in Appendix 'B' here-in-after. 2 Each Job
35 16 S&F in repair Thermal over load relay of current setting range 16 - 25 Amps for 2 Ton EOT crane, complete all as specified & as directed.\nMake : Cat Part No. “3UA5800-2CZ2” of Make 'Siemens’ or equivalent in makes mentioned in Appendix 'B' here-in-after. 2 Each Job
36 17 S&F in repair Power contactor of capacity 70 Amps, AC-03, 415 Volts, 50 Hz, 3 Ph, auxiliary contacts 2NO + 2NC, Coil voltage - 110 V, complete all as specified & as directed.\nMake : Cat Part No. “3TF47 72-0A” of Make 'Siemens’ or equivalent in makes mentioned in Appendix 'B' here-in-after. 2 Each Job
37 18 S&F in repair Power contactor of capacity 12 Amps, AC-03, 415 Volts, 50 Hz, 3 Ph, auxiliary contacts 1NO, Coil voltage - 110 V, complete all as specified & as directed.\nMake : Cat Part No. “3TF31 10-0A” of Make 'Siemens’ or equivalent in makes mentioned in Appendix 'B' here-in-after. 1 Each Job
38 19 S&F in repair Power contactor of capacity 16 Amps, AC-03, 415 Volts, 50 Hz, 3 Ph, Coil voltage - 110 V, complete all as specified & as directed.\nMake : Cat Part No. “3TF32 00-0A” of Make 'Siemens’ or equivalent in makes mentioned in Appendix 'B' here-in-after. 1 Each Job
39 20 S&F in repair Power contactor of capacity 32 Amps, AC-03, 415 Volts, 50 Hz, 3 Ph, Coil voltage - 110 V, complete all as specified & as directed.\nMake : Cat Part No. “3TF34 00-0A” of Make 'Siemens’ or equivalent in makes mentioned in Appendix 'B' here-in-after. 1 Each Job
40 21 S&F in repair Power contactor of capacity 45 Amps, AC-03, 415 Volts, 50 Hz, 3 Ph, auxiliary contacts 2NO + 2NC, Coil voltage - 110 V, complete all as specified & as directed.\nMake : Cat Part No. “3TF46 02-0A” of Make 'Siemens’ or equivalent in makes mentioned in Appendix 'B' here-in-after. 1 Each Job
41 22 S&F in repair Carbon bush along with holder for Hoist creep motion as used / recommended by OEM, complete all as specified & as directed. 18 Each Job
42 23 S&F in repair Rubber bush for motor coupling as used / recommended by OEM, complete all as specified & as directed. 18 Each Job
43 24 S&F in repair Rotary type limit switch with 40:1 ratio, suitable for 10 Ton capacity EOT crane for main hoist, of make as used / recommended by OEM, complete all as specified & as directed. 1 Each Job
44 25 S&F in repair Rotary type limit switch with 40:1 ratio, suitable for 10 Ton capacity EOT crane for long travel, of make as used / recommended by OEM, complete all as specified & as directed. 1 Each Job
45 26 S&F in repair PVC insulated & FR PVC round sheathed, multi stranded copper conductor cable (ISI marked) of size 2.5 Sqmm 4 Core, 1100 Volt, complete all as specified & as directed. 60 RM
46 27 S&F in repair Trailing flexible copper conductor cable (ISI marked) of size 10 Sqmm 4 Core, 1100 Volt, with & including movable clamps and single flanged rollers, complete all as specified & as directed. 90 RM
47 28 S&F in repair Thruster brake shoes of following sizes with necessary copper rivets etc complete of make 'Ferrodo liner' or 'Usha' or as used / recommended by OEM, complete all as specified & as directed :-
48 28.01 100 mm x 125 mm x 12mm thick. 2 Each Job
49 28.02 100 mm x 75 mm x12mm thick. 1 Each Job
50 28.03 112 mm x 100 mm x 12mm thick. 2 Each Job
51 29 S&F in repair Electromagnetic Break Coil suitable for break system of make as used / recommended by OEM, complete all as specified & as directed. 1 Each Job
52 30 M&L for taking down induction motor of capacity 40 HP, 3 Phase, 415 Volt including disconnecting electric connections, dismantling burnt winding from slots and rewinding the motor with new super enameled copper wire as used by the manufacturer / existing size including insulating material and varnishing, replacing worn out bearing as per existing size, nuts, bolts, washers, etc, painting with super enameled paint as per colour code, assembling the motor after rewinding and installation & commissioning at its original location and testing complete all as specified and as directed. 1 Each Job
53 31 M&L for taking down electric motor of Jockey Pump set of capacity 10 HP 3 Phase 415 Volt including disconnecting electric connections, dismantling burnt winding from slots and rewinding the motor with new super enameled copper wire as used by the manufacturer / existing size including insulating material and varnishing, replacing worn out bearing as per existing size, nuts, bolts, washers, etc, painting with super enameled paint as per colour code, assembling the motor after rewinding and installation & commissioning at its original location and testing complete all as specified and as directed. 1 Each Job
54 32 M&L for dismantling of diesel engine driven centrifugal pump set of 65 HP capacity, 3 Phase, 415 Volt with discharge 1150 LPS at pressure of 70 MWC including taking down from its foundation / base frame by disconnecting suction/delivery lines & coupling, opening, including required grinding, welding, machining, lathing, alignment, greasing, etc and replacing worn out spare parts, re-assembling of pump set, re-installation & re-commissioning at its original location & testing complete all as specified and as directed. \nMake :- Kirloskar\nNote : Unserviceable parts required for replacement shall be measured & paid separately as "Supply only" under serial item No. 33.01 to 33.07 here-in-after. 1 Each Job
55 33 Supply only following spare parts for centrifugal pump of capacity 65 HP for replacement under serial item No. 32.00 here-in-before :-\nNote :- Spare Parts shall be of size, type & make as used / recommended by the Original Equipment Manufacturer (OEM).
56 33.01 Inter stage ring 1 Each
57 33.02 Gland Cap CI with nut, bolts complete 2 Each
58 33.03 Neck ring bronze 2 Each
59 33.04 Shaft Sleeve Bronze 2 Each
60 33.05 Shaft Sleeve Nut (Bronze) 2 Each
61 33.06 Gasket set manifold 1 Each
62 33.07 Bearing suitable for pump set make – SKF/NBC/TATA 2 Each
63 34 M&L for dismantling of centrifugal pump set of 40 HP capacity, 3 Phase, 415 Volt with discharge 950 LPM including taking down from its foundation / base frame by disconnecting suction/delivery lines & coupling, opening, including required grinding, welding, machining, lathing, alignment, greasing, etc and replacing worn out spare parts, re-assembling of pump set, re-installation & re-commissioning at its original location & testing complete all as specified and as directed. \nMake :- Kirloskar\nNote : Unserviceable parts required for replacement shall be measured & paid separately as "Supply only" under serial item No. 35.01 to 35.07 here-in-after. 1 Each Job
64 35 Supply only following spare parts for centrifugal pump of capacity 40 HP for replacement under serial item No. 34.00 here-in-before :-\nNote :- Spare Parts shall be of size, type & make as used / recommended by the Original Equipment Manufacturer (OEM).
65 35.01 Inter stage ring 1 Each
66 35.02 Gland Cap CI with nut, bolts complete 2 Each
67 35.03 Neck ring bronze 2 Each
68 35.04 Shaft Sleeve Bronze 2 Each
69 35.05 Shaft Sleeve Nut (Bronze) 2 Each
70 35.06 Gasket set manifold 1 Each
71 35.07 Bearing suitable for pump set make – SKF/NBC/TATA 2 Each
72 36 M&L for dismantling of centrifugal pump set of 10 HP, 3 Phase, 415 Volt capacity with discharge 180 LPM at pressure of 70 MWC including taking down from its foundation / base frame by disconnecting suction/delivery lines & coupling, opening, including required grinding, welding, machining, lathing, alignment, greasing, etc and replacing worn out spare parts, re-assembling of pump set, re-installation & re-commissioning at its original location & testing complete all as specified and as directed. \nMake :- Kirloskar\nNote : Unserviceable parts required for replacement shall be measured & paid separately as "Supply only" under serial item No. 37.01 to 37.07 here-in-after. 1 Each Job
73 37 Supply only following spare parts for centrifugal pump of capacity 10 HP for replacement under serial item No. 36.00 here-in-before :-\nNote :- Spare Parts shall be of size, type & make as used / recommended by the Original Equipment Manufacturer (OEM).
74 37.01 Inter stage ring 1 Each
75 37.02 Gland Cap CI with nut, bolts complete 2 Each
76 37.03 Neck ring bronze 2 Each
77 37.04 Shaft Sleeve Bronze 2 Each
78 37.05 Shaft Sleeve Nut (Bronze) 2 Each
79 37.06 Gasket set manifold 1 Each
80 37.07 Bearing suitable for pump set make – SKF/NBC/TATA 2 Each
81 38 Supply and fixing gun metal fire Hydrant valve single headed with instantaneous gun metal couplings of 63 mm dia with cast iron wheel (ISI marked) confirming to IS:5290 (Type-A) with blank gunmetal cap and chain as required including taking down old unserviceable hydrant valve complete all as specified and as directed.\nMake : MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS 2 Each Set
82 39 Supply & fixing fire fighting canvas hose pipe, cotton synthetic fibre, circular woven jacketed rubberised fabric, reinforced rubber lined (RRL), fire hose, delivery, treated against Rot with mystox, 35.7 Kg/sqcm brust pressure, 22 Kg/sqcm proof pressure, 63mm dia & 15 metre long (ISI marked) Type 'A' with instantaneous type male & female GM coupling (ISI marked) of 63mm dia bound and riveted to hose pipe with copper rivets & 1.5mm thick copper wire, fixed in repairs, complete all as specified and as directed.\nMake : DUNLOP / COSMOS / JAYSHREE / MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS 2 Each Set
83 40 Supply & fixing of fire fighting Gun metal 63mm dia short branch pipe 20mm dia gun metal nozzle ISI marked (IS:903), suitable for instantaneous connection to inter connection hose pipe coupling as required, fixed in repairs, complete all as directed.\nMake : MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS 4 Each Set
84 41 Supply and fixing Hose Box (cabinet) made of 18 gauge MS sheet 800mm x 600mm x 250mm with double door with 4mm thick glasses and door frame made of 16 gauge MS sheet painted fire red outside and brilliant white inside yard, fixed in repairs, complete all as specified & as directed.\nMake : MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS 2 Each Set
85 42 Supply and fixing wall mounting swinging type first aid fire hose reel with drum, hanging brackets, 30 metre length x 20 mm dia high pressure hose reel tubing (ISI marked) with GM shut off nozzle having 5mm dia orifice. The hose reel shall confirming to IS:884-1985, drum shall be fixed on adjoining wall through anchor fasteners / cement concrete block for internal hydrant system, fixed in repairs, complete all as specified & as directed.\nMake : JYOTI / DUNLOP / MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS 2 Each Set
86 43 S&F CI Butter fly valve (suitable for test pressure of PN 1.6) of 150mm bore confirming to IS:13095 (ISI marked) with flanges, nuts, bolts, gasket and washers, fixed in repairs, complete all as specified & as directed. 2 Each Job
87 44 S&F CI Butter fly valve (suitable for test pressure of PN 1.6) of 50mm bore confirming to IS:13095 (ISI marked) with flanges, nuts, bolts, gasket and washers, fixed in repairs, complete all as specified & as directed. 2 Each Job
88 45 Supply and fixing non return valve (NRV) of size 150mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, class ‘PN-1.6’, gun metal seat, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed including dismantling & taking out old unserviceable non return valve of 150mm bore. 2 Each Job
89 46 Supply and fixing non return valve (NRV) of size 50mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, class ‘PN-1.6’, gun metal seat, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed including dismantling & taking out old unserviceable non return valve of 50mm bore. 1 Each Job
90 47 S&F gun metal single acting air release valve with screwed inlet of 25 mm bore size, fixed in repairs, complete all as specified & as directed. 1 Each Job
91 48 S&F bourdon dial type pressure gauge 100 mm dia, suitable for range 0-16 Kg rating with brass isolation valve and pipe, fixed in repairs, complete all as specified & as directed.\nMake : FEBING / TAYLOR / HGURU / FIEBIG 1 Each Job
92 49 S&F dual dial type pressure switch suitable for 1-10 Kg rating including electrical connection setting of cut-in and cut-off pressure, fixed in repairs, complete all as specified & as directed.\nMake :- DANFOSS / HONEYWELL / SIEMENS / HGURU / FIEBIG 3 Each Job
93 50 Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 100 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 100 mm bore, complete, all as specified & directed. 2 Each Job
94 51 Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 80 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 80 mm bore, complete, all as specified & directed. 2 Each Job
95 52 Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 65 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 65 mm bore, complete, all as specified & directed. 2 Each Job
96 53 Supply & fixing fire fighting gun metal Landing Valve with 75mm NB flanged inlet brass spindle, 63mm dia female inst Oblique outlet bearing IS-5290 Mark (ISI marked), flange OD 200mm, PCD 160mm four 19mm dia bolt holes, fixed in repairs, complete all as directed.\nMake : MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS 2 Each Job
97 54 Supply & fixing pressure limit switch IP 70, ISI marked, fixed in repairs, complete all as directed.\nMake :- DANFOSS / HONEYWELL / SIEMENS / HGURU / FIEBIG 2 Each Job
98 55 Supply & fixing Thermal over load relay, Range 17.4-24 Amps, fixed in repairs, complete all as directed. 2 Each Job
99 56 Supply & fixing forged brass Ball Valve with forged brass ball suitable for test pressure of not less than PN 1.6 of size 25mm bore, fixed in repairs, complete all as directed. 20 Each Job
100 57 Supply & fixing fire hose reel 20mm dia gun metal shut off nozzle having 5mm dia orifice, fixed in repairs, complete all as directed.\nMake : MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS 5 Each Job
101 58 Supply & fixing brass fire sprinkler, pendant type, standard size, minimum weight 95 gm, minimum flow - 8Gpm/ 30I/m, operating temperature - 155°F/68°C, fixed in repairs, complete all as specified and as directed.\nMake :- TYCO / CEASEFIRE / MINIMAX / SAFEX / AGNI / NEW AGE / FIRE SHIELD / LIFE GUARD / ZENITH ENGINEERS 50 Each Job
102 59 Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed. 44.4 Cum
103 60 Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed. 25.1 Cum
104 61 Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed. 19.3 Cum
105 62 S&F Foam jet fountain Nozzle of gun metal chromium plated of size inner dia 38mm upper dia 35mm & height 150mm, fixed in repairs, complete all as specified and as directed.\nMake : Aquascape / Royal / Creative / Novatech or other equivalent make as approved by GE. 66 Each Job
106 63 S&F Geyser Jet fountain Nozzle of gun metal chromium plated of size inner dia 50 mm, outer dia 78 mm & height 150 mm, fixed in repairs, complete all as specified and as directed.\nMake : Aquascape / Royal / Creative / Novatech or other equivalent make as approved by GE. 50 Each Job
107 64 S&F Geyser Jet fountain Nozzle of gun metal chromium plated of size inner dia 65 mm, outer dia 150 mm & height 225 mm, fixed in repairs, complete all as specified and as directed.\nMake : Aquascape / Royal / Creative / Novatech or other equivalent make as approved by GE. 40 Each Job
108 65 S&F Angular valve of gun metal chromium plated of size inner dia 20 mm, outer dia 25 mm, height 65 mm, fixed in repairs, complete all as specified and as directed.\nMake : Aquascape / Royal / Creative / Novatech or other equivalent make as approved by GE. 30 Each Job
109 66 S&F submersible flat cable of size 10 sqmm, 3 Core, multistranded copper conductor, PVC insulated and sheathed copper screen protected, 1100 Volts grade, fixed in repairs, complete all as specified and as directed. 200 RM
110 67 S&F LED base water proof programmable colour changing lights as per site requirement, Number of LED-96 Nos, gun metal ring with chromium plated/aluminum powder coated housing for operative voltage - 18V DC, 6 Watt / 9 Watt, Colour - RGB, colour programmable, size 200 mm dia and 30 mm height minimum including necessary electrical work, fixed in repairs, complete all as specified & as directed. \nMake : Model 06R/108R, FM-5MM BODY-ABS/PVC of Creative or equivalent in Philips / Bajaj / Crompton Greaves / Raj / Aroma / Aquascape / Royal / Novatech or other equivalent make as approved by GE.\nNotes :-\n(i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13.\n(ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80.\n(iii) Contractor has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced free of cost in the following case :-\n(a) Manufacturing defects.\n(b) Failure due to mechanical and electrical impact.\n(c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries. 28 Each Job
111 68 M&L for galvanized steel water tubing medium grade of 80mm bore made to shape as required with & including all fittings such as Tee, union, bends, sockets, elbow, etc and fixed complete to walls and ceilings or laid in floors, fixed in repairs, complete all as specified & directed.\nNote :- Contractor’s quoted rates for this item shall deemed to include for all GI fittings and shaping of pipe as required for fountain. The tenderers shall work out the quantity of GI fittings considering the shape of fountain and accessories required to be fitted under other relevant items of this Schedule and quote their rates for this item accordingly. 40 RM
112 69 Supply, fixing and testing micro processing DMX controller for changing colour of colour changing lights changing fast slow or fading of colour with operating voltage 18V DC, 5 Amps as per site requirement, fixed in repairs, complete all as specified and as directed.\nMake : Creative / Aroma / Aquascape / Royal / Novatech or other equivalent make as approved by GE. 3 Each Job
113 70 M&L for taking down of defective induction motor of centrifugal pump set capacity 5 HP / 3.7 KW, 3 Phase, 50 Hz, 415 Volts, 950 LPM discharge at 25 metre head from the foundation, disconnecting the electric & water connections, coupling pulley, and transporting to work shop, cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding with new solid super enameled copper winding wire of size as used by manufacturer / existing size including varnishing, drying, ovening, overhauling, greasing and fixing in the same position, making necessary electric & water connections, commissioning and testing of centrifugal pump & induction motor with & including repair of DOL starter of suitable capacity and necessary fixing arrangement complete all as specified and as directed. 6 Each Job
114 71 Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified including dismantling & taking out old unserviceable cable.\nNotes :-\n(i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.\n(ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions. 400 RM
115 72 M&L for dry sand (Local Tibba sand) and punning for cushioning and cover for protection of under ground electric cable complete all as specified and as directed.\nNotes :-\n(i) Approved local Tibba dry sand free from vegetations, grass and other deleterious substances shall be used.\n(ii) For the purpose of payment, only punned thickness shall be measured. 13.32 Cum
116 73 M&L for sub class ‘B’ (old size) burnt clay bricks laid flat and dry abutting each other with gap between adjacent bricks not exc. 10mm for protection of underground electric cable in such a way that the length of brick is at right angle to the central axis of cable, including taking out old bricks complete all as specified and as directed. 2 Per 1000 Nos
117 74 S&F MCCB, 4 Pole, 40 Amps rating, rupturing capacity 16 kA, 415 Volt grade, AC, 50 Hz, Magnetic fixed type and making connections using suitable size copper lugs/thimbles and crimping tool, including disconnecting & taking down old unserviceable MCCB, complete all as specified & as directed. 3 Each Job
118 75 M&L for galvanized steel water tubing medium grade of 25 mm bore (ISI marked) with & including all fittings laid in trenches, fixed to walls and ceilings or laid in floors, complete all as specified and as directed including dismantling and taking up or down existing unserviceable steel water tubing and connections of 25mm bore.\nNote :- Excavation & earthwork shall be measured & paid for separately. 50 RM
119 76 Supply & fixing mild steel clamps made of flat iron 40x6mm in two halves for tapping through 100 bore GI/CI/DI water pipe line including made to shape, drilling and welding of 25mm GI socket and necessary rubber insertion, nut, bolts & washers complete all as specified and as directed. 4 Each Job
120 77 M&L for opening of submersible motor of capacity 5 HP, 3 Phase, 415 volts, vertical or horizontal any type, cutting down and removing existing burnt out copper winding, cleaning of slots and rewinding with new solid super enameled copper winding wire of size as used by manufacturer / existing size, replacement of worn out spare parts & cable connections, re-assembling of pump set, re-installation & re-commissioning at its original location & testing complete all as specified and as directed. \nNote : Unserviceable parts required for replacement shall be measured & paid separately as "Supply only" under serial item No. 78.01 to 78.08 here-in-after. 4 Each Job
121 78 Supply only following spare parts for submersible pump of capacity 5 HP for replacement under serial item No. 77.00 here-in-before :-\nNote :- Spare Parts shall be of size, type & make as used / recommended by the Original Equipment Manufacturer (OEM).
122 78.01 GM Bush 4 Each
123 78.02 Rotor sleeve 4 Each
124 78.03 Water seal 8 Each
125 78.04 Thrust bearing 8 Each
126 78.05 Thrust plate 8 Each
127 78.06 Coupling Stainless Steel 4 Each
128 78.07 Key for coupling 8 Each
129 78.08 Seal bush 8 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail