Public Health And Engineering Department has published Augmentation And Reorganisation Of Churu Bisau Project Block Alsisar, District Jhunjhunu With Defect Liability Of One Year And Subsequent O&M For 10 Years.. Submission Date for this Tender is 22-04-2021. Civil Work Tenders in Alsisar Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Apr-2021 | Reply of Quires | Other | 22-04-2021 |
| 2 | 21-Apr-2021 | Envelope A Physical Submission | Other | 22-04-2021 |
| Name of Work:-Augmentation and Reorganisation of Churu Bisau Project Block Alsisar, District Jhunjhunu with Defect liability of One year and subsequent O&M for 10 years. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) \nNote : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | 350 mm | BI01010001010000000000000515BI0100001113 | 11520 | RMT |
| 3 | 1.02 | 400 mm | BI01010001010000000000000515BI0100001114 | 12424 | RMT |
| 4 | 1.03 | 500 mm | BI01010001010000000000000515BI0100001115 | 8100 | RMT |
| 5 | 1.04 | 600 mm | BI01010001010000000000000515BI0100001116 | 10520 | RMT |
| 6 | 2 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. | BI01010001010000000000000515BI0100001117 | ||
| 7 | 2.01 | In All Type of Soil | BI01010001010000000000000515BI0100001118 | ||
| 8 | 2.02 | For dia of pipe above 150 mm and up to 350 mm nominal. | BI01010001010000000000000515BI0100001119 | 11520 | RMT |
| 9 | 2.03 | For dia of pipe above 350 mm and up to 700 mm nominal. | BI01010001010000000000000515BI0100001120 | 31044 | RMT |
| 10 | 2.04 | Deduct rate for above item of E/W for pipe line, in case of road cutting, deduct 10% for each layer of 100 mm thick road cut i.e. 20% for 200 mm thick and so on. | BI01010001010000000000000515BI0100001121 | ||
| 11 | 2.05 | BT Road @10% | BI01010001010000000000000515BI0100001122 | ||
| 12 | 2.06 | For dia of pipe above 150 mm and up to 350 mm nominal. | BI01010001010000000000000515BI0100001123 | 1152 | RMT |
| 13 | 2.07 | For dia of pipe above 350 mm and up to 700 mm nominal. | BI01010001010000000000000515BI0100001124 | 3104.4 | RMT |
| 14 | 2.08 | CC Road@ 20% | BI01010001010000000000000515BI0100001125 | ||
| 15 | 2.09 | For dia of pipe above 150 mm and up to 350 mm nominal. | BI01010001010000000000000515BI0100001126 | 2304 | RMT |
| 16 | 2.1 | For dia of pipe above 350 mm and up to 700 mm nominal. | BI01010001010000000000000515BI0100001127 | 6208.8 | RMT |
| 17 | 3 | Providing, lowering, aligning, fixing in position and Jointing in pipe line, DI Body Flanged End Tamper proof Kinetic Air Valve of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512/ IS:14845:2000(amended up to date) Body, High pressure cover , Low pressure cover, Cowl and Joint support ring - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865, Float- LP ball & HP ball : AISI 304 stainless Steel, Seat ring & Gasket - EPDM/NBR ,HP Orifice & HP orifice plug : Bronze/ SS ,Bush: Bronze ,Flanges as per IS/ BS, Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body & cover inside and outside .Fasteners - CS/ Galvanised steel, Outlet of big orifice will have a screen to prevent Tamper of float, with DI metal seated D/F Non rising stem. Sluice Valves as per (IS: 14846 amended upto date) PN 1.6 ratings. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.\nNote: Rates are exclusive of connecting tee, pipe piece and earth work. | BI01010001010000000000000515BI0100001128 | ||
| 18 | 3.01 | Class PN 1.6 | BI01010001010000000000000515BI0100001129 | ||
| 19 | 3.02 | 50 mm | BI01010001010000000000000515BI0100001130 | 22 | each |
| 20 | 3.03 | 80 mm | BI01010001010000000000000515BI0100001131 | 24 | each |
| 21 | 3.04 | 100 mm | BI01010001010000000000000515BI0100001132 | 37 | each |
| 22 | 4 | Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001133 | ||
| 23 | 4.01 | Manually Operated CI Sluice valve of Class PN-1.0 (Isolation Valves for Air Valves) | BI01010001010000000000000515BI0100001134 | ||
| 24 | 4.02 | 80 mm | BI01010001010000000000000515BI0100001135 | 46 | each |
| 25 | 4.03 | 100 mm | BI01010001010000000000000515BI0100001136 | 37 | Each |
| 26 | 5 | Providing, lowering, laying, aligning, fixing in position CI D/F short body pattern type butterfly valves of approved make of following Pressure rating & dia complete, conforming to IS13095/1991 (amended upto date) and of following specifications: Body, disc and end cover of Grey cast iron of IS:210/ FG200, Face to face dimensions as per IS: 13095 & Drilled as per IS:1538. Shaft of SS- AISI- 304/316 & shaft bearings- bronze/Teflon with EPDM/NBR "O "ring seal, generally synthetic rubber faced ring secured on disc by retaining ring with SS steel screw stub, Seating ring/ Seal retaining ring of SS- AISI- 304/316 Seat of EPDM/ Neoprene/ NBR, Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. 2 coats of red oxide conforming to IS:5660 on drained, cleaned & prepared unmachined surface and rust preventive coat on machined and flanged surface and two coats of paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specifications and as per direction of Engineer in charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work | BI01010001010000000000000515BI0100001137 | ||
| 27 | 5.01 | Manually Operated Butterfly Valve PN-1.0 For Junction Valves | BI01010001010000000000000515BI0100001138 | ||
| 28 | 5.02 | 350 mm dia with Gear oprated | 4 | Each | |
| 29 | 5.03 | 400 dia with Gear oprated | BI01010001010000000000000515BI0100001140 | 3 | Each |
| 30 | 5.04 | 500 dia with Gear oprated | BI01010001010000000000000515BI0100001141 | 2 | Each |
| 31 | 5.05 | 600 dia with Gear oprated | BI01010001010000000000000515BI0100001142 | 2 | Each |
| 32 | 6 | Providing, lowering, aligning and fixing in position DI D/F Diaphragm type Pressure Reducing / Flow Control Valve of approved make of following Pressure rating & dia complete and of following specifications: Body & Bonnet - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or ASTM A 536, Diaphragm and Resilient seal disc - Flexible, non-wicking nylon fabric reinforced synthetic elastomer -Buna-N / EPDM (FDA / WRAS approved), Body Seat Ring - Cast stainless steel ASTM- A 351 GR. CF8M / AISI- 316, raised, replaceable inline & onsite Stem - Stainless Steel, AISI-316, raised, replaceable inline & onsite Spring & Bearing bush- Stainless Steel, AISI-316 ,Disc guide, disc retainer & diaphragm washer - Stainless Steel, AISI-304/ 316/Bronze ,Seal- EPDM/ NBR ,Pilot Body- Stainless Steel, AISI-304/ CF8 or Brass Tubing - Stainless Steel, AISI-304 / Copper ,Solenoid Valve- Stainless Steel, AISI-316 ,Throttling plug - Stainless Steel, AISI-304, Nut- Bolts - SS . Face to Face- as per ANSI B 16.1/ EN 558-1 and Flange ends should be as per ANSI B-16.5, Class 150 and Class 300/ EN-1092-2. Insersion rubber of black EPDM 6mm thick Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied both inside and outside . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning as per Technical Specification & as per direction of Engineer-In- Charge. \nNote: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001143 | ||
| 33 | 6.01 | Diaphragm Type Flow Control Valve With Electrical Actuator suitable for scada (PN 1.6 ) | BI01010001010000000000000515BI0100001144 | ||
| 34 | 6.02 | 250 mm | BI01010001010000000000000515BI0100001145 | 3 | each |
| 35 | 7 | Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6\n | BI01010001010000000000000515BI0100001146 | ||
| 36 | 7.01 | 250 mm | BI01010001010000000000000515BI0100001147 | 3 | each |
| 37 | 7.02 | 350 mm | BI01010001010000000000000515BI0100001148 | 4 | each |
| 38 | 7.03 | 400 mm | BI01010001010000000000000515BI0100001149 | 3 | each |
| 39 | 7.04 | 500 mm | BI01010001010000000000000515BI0100001150 | 2 | each |
| 40 | 7.05 | 600 mm | BI01010001010000000000000515BI0100001151 | 2 | each |
| 41 | 8 | AIR VALVE PILLAR -Construction of RCC Air valve pillar of following size including required earth work (PCC 1:4:8 )circular pillar of M-20 cement concrete of suitable size as per GAD including providing fixing of GI pipe with flang and required fitting for air valve complete as per specification and scope of work. ( Item based on PWD BSR Jhunjhunu 2019) | BI01010001010000000000000515BI0100001152 | ||
| 42 | 8.01 | Air valve piller 50 mm | BI01010001010000000000000515BI0100001153 | 22 | each |
| 43 | 8.02 | Air valve piller 80 mm | BI01010001010000000000000515BI0100001154 | 24 | each |
| 44 | 8.03 | Air valve piller 100 mm | BI01010001010000000000000515BI0100001155 | 37 | each |
| 45 | 9 | VALVE CHAMBER- Construction of RCC Valve Chamber of following size including required earth work (PCC M-10, 10 CM th. ) RCC vertical walls in M-25 grade cement concrete of suitable size as per GAD including providing fixing of Reinforced Ferro cement Drain cover designed for class "AA" loading complete as per specification and scope of work. ( Item based on PWD BSR Jhunjhunu 2019) | BI01010001010000000000000515BI0100001156 | ||
| 46 | 9.01 | Valve Chamber size 1.50X1.20 Valve size up to 200 mm to 300 mm | BI01010001010000000000000515BI0100001157 | 3 | each |
| 47 | 9.02 | Valve Chamber size 1.50X1.80 Valve size up to 350 mm to 450 mm | BI01010001010000000000000515BI0100001158 | 7 | each |
| 48 | 9.03 | Valve Chamber size 1.80X2.10 Valve size up to 500 mm to 600 mm | BI01010001010000000000000515BI0100001159 | 4 | each |
| 49 | 10 | Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. | BI01010001010000000000000515BI0100001160 | 127.69 | Cum |
| 50 | 11 | Dismantling of flexible pavement for pipe line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work. | BI01010001010000000000000515BI0100001161 | ||
| 51 | 11.01 | Bituminous courses | BI01010001010000000000000515BI0100001162 | 159.62 | Cum |
| 52 | 11.02 | Granular courses | BI01010001010000000000000515BI0100001163 | 239.42 | Cum |
| 53 | 12 | Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work. | BI01010001010000000000000515BI0100001164 | 63.85 | CUM |
| 54 | 13 | Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work. | BI01010001010000000000000515BI0100001165 | ||
| 55 | 13.01 | M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | BI01010001010000000000000515BI0100001166 | 63.85 | CUM |
| 56 | 14 | Repair of Bituminous Road using GSB 15 cm thick, WBM 15 cm thick in ywo layers , 20 mm thick bitumin carpet and sand seal coat Complete as per specification and scope of work. ( based on JJN 2016 PWD BSR Road 2018 | BI01010001010000000000000515BI0100001167 | 2128.2 | Mtr. |
| 57 | 15 | Providing, laying and jointing RCC NP4 pipe with cement mortar joints by trenchless method adopting any suitable technology below ground at required depth under running traffic condition as per the direction of NHAI including carrying out survey work at the job site for determining underground cable trenches like telephone, power cable, water & sanitary lines and resistivity tests for finding the soil strata using necessary equipments for completion of work, mobilizing of machineries and specialized crew at the job site, etc. complete in all respects, including excavation of drive pit and exit pit (upto 3 metre depth) with proper protection at the three sides, providing and casting of MS cutting edges for front shield and constructing thrust bed at designed level as directed by the Engineer, necessary de-watering and providing concrete foundations at the base of the Drive pit, crane for handling of pipes, and any other machinery, tool & tackels required, construction of temporary works as per requirement and as approved by NH authorities complete in all respect for the road crossing at necessary depth (all depths) with all lead and lifts, as per specification and the direction of the Engineer. ( Internal Dia In MM) ( Cassing Pipe)\n In All type Soil | BI01010001010000000000000515BI0100001168 | ||
| 58 | 15.01 | 600 mm | BI01010001010000000000000515BI0100001169 | 30 | metre |
| 59 | 15.02 | 700 mm | BI01010001010000000000000515BI0100001170 | 30 | metre |
| 60 | 15.03 | 800 mm | BI01010001010000000000000515BI0100001171 | 30 | metre |
| 61 | 15.04 | 1000 mm | BI01010001010000000000000515BI0100001172 | 30 | metre |
| 62 | 16 | Manufacturing, supplying ,lowering, laying and jointing in position to correct line spirally welded SAW/Fabricated MS Pipe having bevelled end plates I coils, confirming to IS 3589-200 I or its latest revision/ amendmendment, for following thickness and inside diameter including all taxes, transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.), field joints, 1.5 satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineerin- charge; (excluding earthwork, internal lining and outer coating). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. ( Nominal Dia &Thickness In MM) ( Carrior pipe) | BI01010001010000000000000515BI0100001173 | ||
| 63 | 16.01 | 350 mm | BI01010001010000000000000515BI0100001174 | 32 | RMT |
| 64 | 16.02 | 400 mm | BI01010001010000000000000515BI0100001175 | 32 | RMT |
| 65 | 16.03 | 450 mm | BI01010001010000000000000515BI0100001176 | 32 | RMT |
| 66 | 16.04 | 500 mm | BI01010001010000000000000515BI0100001177 | 32 | RMT |
| 67 | 17 | Providing and applying Solvent free, two pack liquid epoxy lining to internal surface of M.S. Pipe as per BS 6920:2000 and AWWA C210 standard including preparation of internal surface of pipe by cleaning and abrasive blasting including field joints coating at site complete as per technical specification and direction of Engineer in Incharge. Liquid Epoxy shall be NSF/WARS approved for drinking water | BI01010001010000000000000515BI0100001178 | 347.66 | Sqm |
| 68 | 18 | Providing and applying following Coating to the External surface of MS pipes, including preparation of surface by cleaning as per ISO 8502-3/ SSPC-SP10/ NACE No.2 near white blast cleaning and abrasive blasting to a finish to SA 2.5 as per ISO: 8501-1 and surface profile / anchor profile of 50-75 / 75-100 microns as per ISO: 8503-2, including field joint coating at site complete as per Technical specifications and direction of Engineer –in-charge: \n3 LPE (3 Layer Polyethylene) / DFBE (Dual Layer Fusion Bonded Epoxy)/ PU (Polyurethane)/ Polyolefin Tape coating . | BI01010001010000000000000515BI0100001179 | 176.84 | Sqm |
| 69 | 19 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: | BI01010001010000000000000515BI0100001180 | 320 | Kg |
| 70 | 20 | Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. | BI01010001010000000000000515BI0100001182 | ||
| 71 | 20.01 | 100 mm | BI01010001010000000000000515BI0100001183 | 3650 | RMT |
| 72 | 20.02 | 150 mm | BI01010001010000000000000515BI0100001184 | 70236 | RMT |
| 73 | 20.03 | 200 mm | BI01010001010000000000000515BI0100001185 | 15079 | RMT |
| 74 | 20.04 | 250 mm | BI01010001010000000000000515BI0100001186 | 13000 | RMT |
| 75 | 21 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. | BI01010001010000000000000515BI0100001187 | ||
| 76 | 21.01 | In All Type of Soil | BI01010001010000000000000515BI0100001188 | ||
| 77 | 21.02 | For HDPE pipe line dia up to 110 mm | BI01010001010000000000000515BI0100001189 | 3650 | RMT |
| 78 | 21.03 | For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm. | BI01010001010000000000000515BI0100001190 | 70236 | RMT |
| 79 | 21.04 | For dia of pipe above 150 mm and up to 350 mm nominal. | BI01010001010000000000000515BI0100001191 | 28079 | RMT |
| 80 | 21.05 | Deduct rate for above item of E/W for pipe line, in case of road cutting, deduct 10% for each layer of 100 mm thick road cut i.e. 20% for 200 mm thick and so on. | BI01010001010000000000000515BI0100001192 | ||
| 81 | 21.06 | BT Road @15% | BI01010001010000000000000515BI0100001193 | ||
| 82 | 21.07 | For HDPE pipe line dia up to 110 mm | BI01010001010000000000000515BI0100001194 | 365 | RMT |
| 83 | 21.08 | For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm. | BI01010001010000000000000515BI0100001195 | 7023.6 | RMT |
| 84 | 21.09 | For dia of pipe above 150 mm and up to 350 mm nominal. | BI01010001010000000000000515BI0100001196 | 2807.9 | RMT |
| 85 | 21.1 | For dia of pipe above 350 mm and up to 700 mm nominal. | BI01010001010000000000000515BI0100001197 | ||
| 86 | 21.11 | CC Road@ 20% | BI01010001010000000000000515BI0100001198 | ||
| 87 | 21.12 | For HDPE pipe line dia up to 110 mm | BI01010001010000000000000515BI0100001199 | 730 | RMT |
| 88 | 21.13 | For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm. | BI01010001010000000000000515BI0100001200 | 14047.2 | RMT |
| 89 | 21.14 | For dia of pipe above 150 mm and up to 350 mm nominal. | BI01010001010000000000000515BI0100001201 | 5615.8 | RMT |
| 90 | 22 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils | BI01010001010000000000000515BI0100001202 | ||
| 91 | 23 | Providing, lowering, laying, aligning, fixing in position CI D/F short body pattern type butterfly valves of approved make of following Pressure rating & dia complete, conforming to IS13095/1991 (amended upto date) and of following specifications: Body, disc and end cover of Grey cast iron of IS:210/ FG200, Face to face dimensions as per IS: 13095 & Drilled as per IS:1538. Shaft of SS- AISI- 304/316 & shaft bearings- bronze/Teflon with EPDM/NBR "O "ring seal, generally synthetic rubber faced ring secured on disc by retaining ring with SS steel screw stub, Seating ring/ Seal retaining ring of SS- AISI- 304/316 Seat of EPDM/ Neoprene/ NBR, Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. 2 coats of red oxide conforming to IS:5660 on drained, cleaned & prepared unmachined surface and rust preventive coat on machined and flanged surface and two coats of paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specifications and as per direction of Engineer in charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work | BI01010001010000000000000515BI0100001203 | ||
| 92 | 23.01 | Manually Operated Butterfly Valve PN-1.0 (Sectional Valves) | BI01010001010000000000000515BI0100001204 | ||
| 93 | 23.02 | 150 mm dia (with gear operated) | BI01010001010000000000000515BI0100001205 | 7 | Each |
| 94 | 23.03 | 200 mm dia (with gear operated) | BI01010001010000000000000515BI0100001206 | 1 | Each |
| 95 | 23.04 | 250 mm dia (with gear operated) | BI01010001010000000000000515BI0100001207 | 1 | Each |
| 96 | 24 | Providing, lowering, aligning, fixing in position and Jointing in pipe line, DI Body Flanged End Tamper proof Kinetic Air Valve of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512/ IS:14845:2000(amended up to date) Body, High pressure cover , Low pressure cover, Cowl and Joint support ring - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865, Float- LP ball & HP ball : AISI 304 stainless Steel, Seat ring & Gasket - EPDM/NBR ,HP Orifice & HP orifice plug : Bronze/ SS ,Bush: Bronze ,Flanges as per IS/ BS, Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body & cover inside and outside .Fasteners - CS/ Galvanised steel, Outlet of big orifice will have a screen to prevent Tamper of float, with DI metal seated D/F Non rising stem. Sluice Valves as per (IS: 14846 amended upto date) PN 1.6 ratings. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge. Note: Rates are exclusive of connecting tee, pipe piece and earth work. ( Class PN 1.6) | BI01010001010000000000000515BI0100001208 | ||
| 97 | 24.01 | 50 mm | BI01010001010000000000000515BI0100001209 | 190 | each |
| 98 | 25 | Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001210 | ||
| 99 | 25.01 | Manually Operated Resilient Seated Sluice Valves of Class PN 1.0/1.6 Junction Valves | BI01010001010000000000000515BI0100001211 | ||
| 100 | 25.02 | 100 mm | BI01010001010000000000000515BI0100001212 | 2 | Each |
| 101 | 25.03 | 150 mm | BI01010001010000000000000515BI0100001213 | 15 | Each |
| 102 | 25.04 | 200 mm | BI01010001010000000000000515BI0100001214 | 14 | Each |
| 103 | 25.05 | 250 mm | BI01010001010000000000000515BI0100001215 | 7 | Each |
| 104 | 26 | Providing, lowering, aligning and fixing in position DI D/F Diaphragm type Pressure Reducing / Flow Control Valve of approved make of following Pressure rating & dia complete and of following specifications: Body & Bonnet - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or ASTM A 536, Diaphragm and Resilient seal disc - Flexible, non-wicking nylon fabric reinforced synthetic elastomer -Buna-N / EPDM (FDA / WRAS approved), Body Seat Ring - Cast stainless steel ASTM- A 351 GR. CF8M / AISI- 316, raised, replaceable inline & onsite Stem - Stainless Steel, AISI-316, raised, replaceable inline & onsite Spring & Bearing bush- Stainless Steel, AISI-316 ,Disc guide, disc retainer & diaphragm washer - Stainless Steel, AISI-304/ 316/Bronze ,Seal- EPDM/ NBR ,Pilot Body- Stainless Steel, AISI-304/ CF8 or Brass Tubing - Stainless Steel, AISI-304 / Copper ,Solenoid Valve- Stainless Steel, AISI-316 ,Throttling plug - Stainless Steel, AISI-304, Nut- Bolts - SS . Face to Face- as per ANSI B 16.1/ EN 558-1 and Flange ends should be as per ANSI B-16.5, Class 150 and Class 300/ EN-1092-2. Insersion rubber of black EPDM 6mm thick Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied both inside and outside . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning as per Technical Specification & as per direction of Engineer-In- Charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001216 | ||
| 105 | 26.01 | Diaphragm Type Flow Control Valve With Electrical Actuator suitable for scada (PN 1.6 ) | BI01010001010000000000000515BI0100001217 | ||
| 106 | 26.02 | 100 mm | BI01010001010000000000000515BI0100001218 | 16 | each |
| 107 | 26.03 | 150 mm | BI01010001010000000000000515BI0100001219 | 9 | each |
| 108 | 27 | Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6 | BI01010001010000000000000515BI0100001220 | ||
| 109 | 27.01 | 100 mm | BI01010001010000000000000515BI0100001221 | 10 | each |
| 110 | 27.02 | 150 mm | BI01010001010000000000000515BI0100001222 | 22 | each |
| 111 | 27.03 | 200 mm | BI01010001010000000000000515BI0100001223 | 15 | each |
| 112 | 27.04 | 250 mm | BI01010001010000000000000515BI0100001224 | 8 | each |
| 113 | 28 | AIR VALVE PILLAR - Construction of RCC Air valve pillar of following size including required earth work (PCC 1:4:8 )circular pillar of M-20 cement concrete of suitable size as per GAD including providing fixing of GI pipe with flang and required fitting for air valve complete as per specification and scope of work. ( Item based onPWD BSR Jhunjhunu 2019) | BI01010001010000000000000515BI0100001225 | ||
| 114 | 28.01 | Air valve piller 50 mm | BI01010001010000000000000515BI0100001226 | 190 | each |
| 115 | 29 | VALVE CHAMBER- Construction of RCC Valve Chamber of following size including required earth work (PCC M-10, 10 CM th. ) RCC vertical walls in M-25 grade cement concrete of suitable size as per GAD including providing fixing of Reinforced Ferro cement Drain cover designed for class "AA" loading complete as per specification and scope of work. ( Item based on PWD BSR JNN 2019) | BI01010001010000000000000515BI0100001227 | ||
| 116 | 29.01 | Valve Chamber size 0.90X1.20 Valve size up to 150 mm | BI01010001010000000000000515BI0100001228 | 32 | each |
| 117 | 29.02 | Valve Chamber size 1.50X1.20 Valve size up to 200 mm to 300 mm | BI01010001010000000000000515BI0100001229 | 23 | each |
| 118 | 30 | Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. | BI01010001010000000000000515BI0100001230 | 764.74 | Cum |
| 119 | 31 | Dismantling of flexible pavement for pipe line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work. | BI01010001010000000000000515BI0100001231 | ||
| 120 | 31.01 | Bituminous courses | BI01010001010000000000000515BI0100001232 | 430.16 | Cum |
| 121 | 31.02 | Granular courses | BI01010001010000000000000515BI0100001233 | 573.55 | Cum |
| 122 | 32 | Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work. | BI01010001010000000000000515BI0100001234 | 382.37 | CUM |
| 123 | 33 | Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work. | BI01010001010000000000000515BI0100001235 | ||
| 124 | 33.01 | M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | BI01010001010000000000000515BI0100001236 | 382.37 | CUM |
| 125 | 34 | Repair of Bituminous Road using GSB 15 cm thick, WBM 15 cm thick in ywo layers , 20 mm thick bitumin carpet and sand seal coat Complete as per specification and scope of work. ( based on JJN 2016 PWD BSR Road 2018 | BI01010001010000000000000515BI0100001237 | 5098.25 | Mtr. |
| 126 | 35 | Providing and laying RCC NP4 pipe (with steel pushing collar) jointing with cement mortar joints by trenchless method adopting any suitable technology below ground at required depth including carrying out survey work at the job site for determining underground cable trenches like telephone, power cable, water & sanitary lines and resistivity tests for finding the soil strata using necessary equipments for completion of work, mobilizing of machineries and specialized crew at the job site, etc. complete in all respects, including excavation of drive pit and exit pit upto 3 metre depth with proper protection at the three sides, providing and casting of MS cutting edges for front shield and constructing thrust bed at designed level as directed by the Engineer, crane for handling of pipes, and any other machinery, tool & tackles required, complete in all respect as per specification and the direction of the Engineer. ( Internal Dia In MM) ( Cassing Pipe)\n | BI01010001010000000000000515BI0100001238 | ||
| 127 | 35.01 | 300 mm | BI01010001010000000000000515BI0100001239 | 60 | metre |
| 128 | 36 | Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to date of following sizes | BI01010001010000000000000515BI0100001240 | ||
| 129 | 36.01 | 150 mm dia NB (Thickness of pipe 5.0 mm & mass of tube 20.13 Kg/m) | BI01010001010000000000000515BI0100001241 | 64 | metre |
| 130 | 37 | Providing and applying 100% Solids,Rigid, DTM Polyurethane Coating to internal surface of M.S. Pipe as per AWWA C222 standard including preparation of internal surface of pipe by cleaning and abrasive blasting including field joints coating at site complete as per technical specification and direction of Engineer in Incharge. Polyurethane Coating shall be NSF/WARS/SS-375 approved for drinking water. | BI01010001010000000000000515BI0100001242 | 30.14 | Sqm |
| 131 | 38 | Providing and applying following Coating to the External surface of MS pipes, including preparation of surface by cleaning as per ISO 8502-3/ SSPC-SP10/ NACE No.2 near white blast cleaning and abrasive blasting to a finish to SA 2.5 as per ISO: 8501-1 and surface profile / anchor profile of 50-75 / 75-100 microns as per ISO: 8503-2, including field joint coating at site complete as per Technical specifications and direction of Engineer –in-charge: \n3 LPE (3 Layer Polyethylene) / DFBE (Dual Layer Fusion Bonded Epoxy)/ PU (Polyurethane)/ Polyolefin Tape coating . | BI01010001010000000000000515BI0100001243 | 31.95 | Sqm |
| 132 | 39 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: | BI01010001010000000000000515BI0100001244 | 64 | Kg |
| 133 | 40 | Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . \nNote : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.\nSupply may be in coil or straight length in 6 M/12 M. | BI01010001010000000000000515BI0100001246 | ||
| 134 | 40.01 | HDPE PE-80 PN-6 | BI01010001010000000000000515BI0100001247 | ||
| 135 | 40.02 | 90 mm | BI01010001010000000000000515BI0100001248 | 57698 | RMT |
| 136 | 40.03 | 110 mm | BI01010001010000000000000515BI0100001249 | 13509 | RMT |
| 137 | 41 | Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work). \nNote : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.\nSupply of pipe shall be in straight length in 6/12 M. | BI01010001010000000000000515BI0100001250 | ||
| 138 | 41.01 | HDPE PE-80 PN-6 | BI01010001010000000000000515BI0100001251 | ||
| 139 | 41.02 | 125 mm | BI01010001010000000000000515BI0100001252 | 26632 | RMT |
| 140 | 41.03 | 140 mm | BI01010001010000000000000515BI0100001253 | 40111 | RMT |
| 141 | 41.04 | 160 mm | BI01010001010000000000000515BI0100001254 | 18131 | RMT |
| 142 | 41.05 | 180 mm | BI01010001010000000000000515BI0100001255 | 6790 | RMT |
| 143 | 41.06 | 200 mm | BI01010001010000000000000515BI0100001256 | 2207 | RMT |
| 144 | 41.07 | 225 mm | BI01010001010000000000000515BI0100001257 | 5862 | RMT |
| 145 | 42 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. | BI01010001010000000000000515BI0100001258 | ||
| 146 | 42.01 | In All Type of Soil | BI01010001010000000000000515BI0100001259 | ||
| 147 | 42.02 | For HDPE pipe line dia up to 110 mm | BI01010001010000000000000515BI0100001260 | 71207 | RMT |
| 148 | 42.03 | For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm. | BI01010001010000000000000515BI0100001261 | 66743 | RMT |
| 149 | 42.04 | For dia of pipe above 150 mm and up to 350 mm nominal. | BI01010001010000000000000515BI0100001262 | 32990 | RMT |
| 150 | 42.05 | Deduct rate for above item of E/W for pipe line, in case of road cutting, deduct 10% for each layer of 100 mm thick road cut i.e. 20% for 200 mm thick and so on. | BI01010001010000000000000515BI0100001263 | ||
| 151 | 42.06 | BT Road @15% | BI01010001010000000000000515BI0100001264 | ||
| 152 | 42.07 | For HDPE pipe line dia up to 110 mm | BI01010001010000000000000515BI0100001265 | 7120.7 | RMT |
| 153 | 42.08 | For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm. | BI01010001010000000000000515BI0100001266 | 6674.3 | RMT |
| 154 | 42.09 | For dia of pipe above 150 mm and up to 350 mm nominal. | BI01010001010000000000000515BI0100001267 | 3299 | RMT |
| 155 | 42.1 | For dia of pipe above 350 mm and up to 700 mm nominal. | BI01010001010000000000000515BI0100001268 | ||
| 156 | 42.11 | CC Road@ 20% | BI01010001010000000000000515BI0100001269 | ||
| 157 | 42.12 | For HDPE pipe line dia up to 110 mm | BI01010001010000000000000515BI0100001270 | 3560.35 | RMT |
| 158 | 42.13 | For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm. | BI01010001010000000000000515BI0100001271 | 3337.15 | RMT |
| 159 | 42.14 | For dia of pipe above 150 mm and up to 350 mm nominal. | BI01010001010000000000000515BI0100001272 | 1649.5 | RMT |
| 160 | 43 | Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001274 | ||
| 161 | 43.01 | Manually Operated Resilient Seated Sluice Valves of Class PN 1.0/1.6 Junction Valves | BI01010001010000000000000515BI0100001275 | ||
| 162 | 43.02 | 80 mm | BI01010001010000000000000515BI0100001276 | 25 | Each |
| 163 | 43.03 | 100 mm | BI01010001010000000000000515BI0100001277 | 31 | Each |
| 164 | 43.04 | 125 mm | BI01010001010000000000000515BI0100001278 | 57 | Each |
| 165 | 43.05 | 150 mm | BI01010001010000000000000515BI0100001279 | 31 | Each |
| 166 | 43.06 | 200 mm | BI01010001010000000000000515BI0100001280 | 2 | Each |
| 167 | 44 | Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6 | BI01010001010000000000000515BI0100001281 | ||
| 168 | 44.01 | 80 mm | BI01010001010000000000000515BI0100001282 | 25 | Each |
| 169 | 44.02 | 100 mm | BI01010001010000000000000515BI0100001283 | 31 | Each |
| 170 | 44.03 | 125 mm | BI01010001010000000000000515BI0100001284 | 57 | Each |
| 171 | 44.04 | 150 mm | BI01010001010000000000000515BI0100001285 | 31 | Each |
| 172 | 44.05 | 200 mm | BI01010001010000000000000515BI0100001286 | 2 | Each |
| 173 | 45 | Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI single Air Valve Flanged/ Screwed type of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended upto date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 ,Float Guide- HBT1,Body seat ring - Leaded tin bronze/ SS , Seal ring and face ring - EPDM/NBR, Ends flanged according to IS:6418 or screwed type shall have external pipe threads conforming to IS:554, Fasteners - CS. All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of paint conforming to IS:9862 or IS:2932( Non-Toxic- suitable for drinking water) applied inside and outside. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.\nNote: Rates are exclusive of connecting tee, pipe piece and earth work. | BI01010001010000000000000515BI0100001287 | ||
| 174 | 45.01 | Class PN-1.0 | BI01010001010000000000000515BI0100001288 | ||
| 175 | 45.02 | 25 mm S-1 Type | BI01010001010000000000000515BI0100001289 | 338 | each |
| 176 | 46 | AIR VALVE PILLAR - Construction of RCC Air valve pillar of following size including required earth work (PCC 1:4:8 )circular pillar of M-20 cement concrete of suitable size as per GAD including providing fixing of GI pipe with flang and required fitting for air valve complete as per specification and scope of work. ( Item based onPWD BSR Jhunjhunu 2019) | BI01010001010000000000000515BI0100001290 | ||
| 177 | 46.01 | Air valve piller 25 mm | BI01010001010000000000000515BI0100001291 | 338 | each |
| 178 | 47 | VALVE CHAMBER- Construction of RCC Valve Chamber of following size including required earth work (PCC M-10, 10 CM th. ) RCC vertical walls in M-25 grade cement concrete of suitable size as per GAD including providing fixing of Reinforced Ferro cement Drain cover designed for class "AA" loading complete as per specification and scope of work. ( Item based onPWD BSR Jhunjhunu 2019 ) | BI01010001010000000000000515BI0100001292 | ||
| 179 | 47.01 | Valve Chamber size 0.90X1.20 Valve size up to 150 mm | BI01010001010000000000000515BI0100001293 | 144 | each |
| 180 | 47.02 | Valve Chamber size 1.50X1.20 Valve size up to 200 mm to 300 mm | BI01010001010000000000000515BI0100001294 | 2 | each |
| 181 | 48 | Providing & lowering of G.I. Pipes, flange pipe including rubber washer and nuts of 8 mm dia complete in all respect I.S.I. Make. | BI01010001010000000000000515BI0100001295 | ||
| 182 | 48.01 | B Class 50 mm dia. | BI01010001010000000000000515BI0100001296 | ||
| 183 | 48.02 | B Class 75 mm dia. | BI01010001010000000000000515BI0100001297 | 312 | Rmt |
| 184 | 48.03 | B Class 100 mm dia. | BI01010001010000000000000515BI0100001298 | 104 | Rmt |
| 185 | 49 | SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU) , Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge. \nNote: Rates are exclusive of tail piece / dismantling joints and earth work. | BI01010001010000000000000515BI0100001299 | ||
| 186 | 49.01 | 50 mm | BI01010001010000000000000515BI0100001300 | 13 | each |
| 187 | 49.02 | 80 mm | BI01010001010000000000000515BI0100001301 | 78 | each |
| 188 | 49.03 | 100 mm | BI01010001010000000000000515BI0100001302 | 19 | each |
| 189 | 49.04 | 150 mm | BI01010001010000000000000515BI0100001303 | 7 | each |
| 190 | 50 | VTC - Construction of village lavel transfer chamber and meter room, work including require earth work PCC 1:4:8 under floor & for foundation, walls of chmber constrected by RCC M-20, with Fiber reinforced Ferro cement drain cover (light duty). Construction of brick masonary meter room above GL, 23 cm thick Brick masonary walls over stone masonary foundation coverd by RCC roof, CC flooring, MS sheet door with lackin arrangments | BI01010001010000000000000515BI0100001304 | 2 | each |
| 191 | 51 | Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. | BI01010001010000000000000515BI0100001305 | 1282.05 | Cum |
| 192 | 52 | Dismantling of flexible pavement for pipe line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work. | BI01010001010000000000000515BI0100001306 | ||
| 193 | 52.01 | Bituminous courses | BI01010001010000000000000515BI0100001307 | 1923.08 | Cum |
| 194 | 52.02 | Granular courses | BI01010001010000000000000515BI0100001308 | 1923.08 | Cum |
| 195 | 53 | Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work. | BI01010001010000000000000515BI0100001309 | 641.03 | CUM |
| 196 | 54 | Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work. | BI01010001010000000000000515BI0100001310 | ||
| 197 | 54.01 | M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | BI01010001010000000000000515BI0100001311 | 641.03 | CUM |
| 198 | 55 | Repair of Bituminous Road using GSB 15 cm thick, WBM 15 cm thick in ywo layers , 20 mm thick bitumin carpet and sand seal coat Complete as per specification and scope of work. ( based on JJN 2016 PWD BSR Road 2018 | BI01010001010000000000000515BI0100001312 | 17094 | Mtr. |
| 199 | 56 | Providing and laying RCC NP4 pipe (with steel pushing collar) jointing with cement mortar joints by trenchless method adopting any suitable technology below ground at required depth including carrying out survey work at the job site for determining underground cable trenches like telephone, power cable, water & sanitary lines and resistivity tests for finding the soil strata using necessary equipments for completion of work, mobilizing of machineries and specialized crew at the job site, etc. complete in all respects, including excavation of drive pit and exit pit upto 3 metre depth with proper protection at the three sides, providing and casting of MS cutting edges for front shield and constructing thrust bed at designed level as directed by the Engineer, crane for handling of pipes, and any other machinery, tool & tackles required, complete in all respect as per specification and the direction of the Engineer. ( Internal Dia In MM) ( Cassing Pipe)\n | BI01010001010000000000000515BI0100001313 | ||
| 200 | 56.01 | 200 mm | BI01010001010000000000000515BI0100001314 | 210 | metre |
| 201 | 57 | Providing, lowering, aligning and fixing in position DI D/F Diaphragm type Pressure Reducing / Flow Control Valve of approved make of following Pressure rating & dia complete and of following specifications: Body & Bonnet - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or ASTM A 536, Diaphragm and Resilient seal disc - Flexible, non-wicking nylon fabric reinforced synthetic elastomer -Buna-N / EPDM (FDA / WRAS approved), Body Seat Ring - Cast stainless steel ASTM- A 351 GR. CF8M / AISI- 316, raised, replaceable inline & onsite Stem - Stainless Steel, AISI-316, raised, replaceable inline & onsite Spring & Bearing bush- Stainless Steel, AISI-316 ,Disc guide, disc retainer & diaphragm washer - Stainless Steel, AISI-304/ 316/Bronze ,Seal- EPDM/ NBR ,Pilot Body- Stainless Steel, AISI-304/ CF8 or Brass Tubing - Stainless Steel, AISI-304 / Copper ,Solenoid Valve- Stainless Steel, AISI-316 ,Throttling plug - Stainless Steel, AISI-304, Nut- Bolts - SS . Face to Face- as per ANSI B 16.1/ EN 558-1 and Flange ends should be as per ANSI B-16.5, Class 150 and Class 300/ EN-1092-2. Insersion rubber of black EPDM 6mm thick Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied both inside and outside . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning as per Technical Specification & as per direction of Engineer-In- Charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001315 | ||
| 202 | 57.01 | Note: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001316 | ||
| 203 | 57.02 | 80 mm | BI01010001010000000000000515BI0100001317 | 46 | Each |
| 204 | 57.03 | 100 mm | BI01010001010000000000000515BI0100001318 | 5 | Each |
| 205 | 58 | Providing, lowering, laying, aligning, fixing in position at all level/ depths CI Class - B specials as per IS : 1538, amended up to date in trenches complete including all material, labour, testing and commissioning along with pipe line/ appurtenence as per Technical Specifications and as per direction of Engineer.\nNote : E/w to be measured and paid separately. | BI01010001010000000000000515BI0100001319 | ||
| 206 | 58.01 | Plain ended CI specials including tail piece, spigot end and socket end | BI01010001010000000000000515BI0100001320 | ||
| 207 | 58.02 | Upto 300 mm | BI01010001010000000000000515BI0100001321 | 2000 | Kg. |
| 208 | 59 | Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.\nSupply may be in coil or straight length in 6 M/12 M. | BI01010001010000000000000515BI0100001323 | ||
| 209 | 59.01 | HDPE PE-80 PN-6 | BI01010001010000000000000515BI0100001324 | ||
| 210 | 59.02 | 75 mm | BI01010001010000000000000515BI0100001325 | 220603 | Mtr. |
| 211 | 59.03 | 90 mm | BI01010001010000000000000515BI0100001326 | 299538 | Mtr. |
| 212 | 59.04 | 110 mm | BI01010001010000000000000515BI0100001327 | 28826 | Mtr. |
| 213 | 60 | Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.\nSupply of pipe shall be in straight length in 6/12 M. | BI01010001010000000000000515BI0100001328 | ||
| 214 | 60.01 | HDPE PE-80 PN-6 | BI01010001010000000000000515BI0100001329 | ||
| 215 | 60.02 | 125 mm | BI01010001010000000000000515BI0100001330 | 11261 | Mtr. |
| 216 | 60.03 | 140 mm | BI01010001010000000000000515BI0100001331 | 10247 | Mtr. |
| 217 | 60.04 | 160 mm | BI01010001010000000000000515BI0100001332 | 1747 | Mtr. |
| 218 | 60.05 | 180mm | BI01010001010000000000000515BI0100001333 | 2068 | Mtr. |
| 219 | 60.06 | 200 mm | BI01010001010000000000000515BI0100001334 | 371 | Mtr. |
| 220 | 61 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. | BI01010001010000000000000515BI0100001336 | ||
| 221 | 61.01 | In All Type of Soil | BI01010001010000000000000515BI0100001337 | ||
| 222 | 61.02 | For HDPE pipe line dia up to 110 mm | BI01010001010000000000000515BI0100001338 | 548967 | Mtr. |
| 223 | 61.03 | For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm. | BI01010001010000000000000515BI0100001339 | 21508 | Mtr. |
| 224 | 61.04 | For dia of pipe above 150 mm and up to 350 mm nominal. | BI01010001010000000000000515BI0100001340 | 4186 | Mtr. |
| 225 | 61.05 | Deduct rate for above item of E/W for pipe line, in case of road cutting, deduct 10% for each layer of 100 mm thick road cut i.e. 20% for 200 mm thick and so on. | BI01010001010000000000000515BI0100001341 | ||
| 226 | 61.06 | BT Road @15% | BI01010001010000000000000515BI0100001342 | ||
| 227 | 61.07 | For HDPE pipe line dia up to 110 mm | BI01010001010000000000000515BI0100001343 | 82345.1 | RMT |
| 228 | 61.08 | For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm. | BI01010001010000000000000515BI0100001344 | 3226.2 | RMT |
| 229 | 61.09 | For dia of pipe above 150 mm and up to 350 mm nominal. | BI01010001010000000000000515BI0100001345 | 627.9 | RMT |
| 230 | 61.1 | CC Road@ 20% | BI01010001010000000000000515BI0100001347 | ||
| 231 | 61.11 | For HDPE pipe line dia up to 110 mm | BI01010001010000000000000515BI0100001348 | 41172.5 | RMT |
| 232 | 61.12 | For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm. | BI01010001010000000000000515BI0100001349 | 1613.1 | RMT |
| 233 | 61.13 | For dia of pipe above 150 mm and up to 350 mm nominal. | BI01010001010000000000000515BI0100001350 | 313.95 | RMT |
| 234 | 62 | Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001352 | ||
| 235 | 62.01 | Manually Operated Resilient Seated Sluice Valves of Class PN 1.0/1.6 Junction Valves | BI01010001010000000000000515BI0100001353 | ||
| 236 | 62.02 | 80 mm | BI01010001010000000000000515BI0100001354 | 156 | each |
| 237 | 62.03 | 100 mm | BI01010001010000000000000515BI0100001355 | 91 | each |
| 238 | 62.04 | 125 mm | BI01010001010000000000000515BI0100001356 | 17 | each |
| 239 | 62.05 | 150 mm | BI01010001010000000000000515BI0100001357 | 10 | each |
| 240 | 63 | Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6 | BI01010001010000000000000515BI0100001358 | ||
| 241 | 63.01 | 80 mm | BI01010001010000000000000515BI0100001359 | 156 | each |
| 242 | 63.02 | 100 mm | BI01010001010000000000000515BI0100001360 | 91 | each |
| 243 | 63.03 | 125 mm | BI01010001010000000000000515BI0100001361 | 17 | each |
| 244 | 63.04 | 150 mm | BI01010001010000000000000515BI0100001362 | 10 | each |
| 245 | 64 | VALVE CHAMBER- Construction of RCC Valve Chamber of following size including required earth work (PCC M-10, 10 CM th. ) RCC vertical walls in M-25 grade cement concrete of suitable size as per GAD including providing fixing of Reinforced Ferro cement Drain cover designed for class "AA" loading complete as per specification and scope of work. ( Item based onPWD BSR Jhunjhunu 2019 ) | BI01010001010000000000000515BI0100001363 | ||
| 246 | 64.01 | Valve Chamber size 0.90X1.20 Valve size up to 150 mm | BI01010001010000000000000515BI0100001364 | 274 | each |
| 247 | 65 | Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. | BI01010001010000000000000515BI0100001365 | 6464.94 | Cum |
| 248 | 66 | Dismantling of flexible pavement for pipe line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work. | BI01010001010000000000000515BI0100001366 | ||
| 249 | 66.01 | Bituminous courses | BI01010001010000000000000515BI0100001367 | 3232.47 | Cum |
| 250 | 66.02 | Granular courses | BI01010001010000000000000515BI0100001368 | 9697.4 | Cum |
| 251 | 67 | Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work. | BI01010001010000000000000515BI0100001369 | 3232.47 | CUM |
| 252 | 68 | Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work. | BI01010001010000000000000515BI0100001370 | ||
| 253 | 68.01 | M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | BI01010001010000000000000515BI0100001371 | 3232.47 | CUM |
| 254 | 69 | Repair of Bituminous Road using GSB 15 cm thick, WBM 15 cm thick in ywo layers , 20 mm thick bitumin carpet and sand seal coat Complete as per specification and scope of work. ( based on JJN 2016 PWD BSR Road 2018 | BI01010001010000000000000515BI0100001372 | 103439 | Mtr. |
| 255 | 70 | Providing and laying RCC NP4 pipe (with steel pushing collar) jointing with cement mortar joints by trenchless method adopting any suitable technology below ground at required depth including carrying out survey work at the job site for determining underground cable trenches like telephone, power cable, water & sanitary lines and resistivity tests for finding the soil strata using necessary equipments for completion of work, mobilizing of machineries and specialized crew at the job site, etc. complete in all respects, including excavation of drive pit and exit pit upto 3 metre depth with proper protection at the three sides, providing and casting of MS cutting edges for front shield and constructing thrust bed at designed level as directed by the Engineer, crane for handling of pipes, and any other machinery, tool & tackles required, complete in all respect as per specification and the direction of the Engineer. ( Internal Dia In MM) ( Cassing Pipe)\n | BI01010001010000000000000515BI0100001373 | ||
| 256 | 70.01 | 200 mm | BI01010001010000000000000515BI0100001374 | 200 | Mtr. |
| 257 | 71 | Construction of RCC INTZE type Head Service Reservoir of following capacity and staging consisting of excavation in all types of strata, RCC work, cement plaster with water proofing compound to the inner face of the container including refilling disposing off the surplus stuff, plinth protection , all labour and material charges including providing and fixing of accessories such as ladder , manhole frame and covers, water level indicator (float type), ventilator with SS screen, lightening arrestor, float valve, puddle collar, G.I. pipe railing around walk way and top dome, providing RCC staircase from 4.5 mtr height of ground level to top level, chambers for all valves, providing and applying three coats of cement paint to the external surfaces of container, column, bracing, carbonation paint on external surface of top dome, food grade epoxy paint on internal surface and giving satisfactory hydraulic test and water tightness test as per I.S. code, etc. complete in all respect as per design data, criteria, obligatory requirements and detailed specifications, scope of work and GA drawing. The job includes conducting SBC test, design and proof check of reservoirs (if required),painting the name of the scheme and other details on the reservoir, providing alluminium portable ladder suitable to reach at height of 4.5 Mtr(start of RCC reservoir) and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work . Rates for RCC OHSR, SBC 10 T/sqm, seismic zone II and Staging 20 Meter. ( capacity in KL) | BI01010001010000000000000515BI0100001376 | ||
| 258 | 71.01 | 150 KL | BI01010001010000000000000515BI0100001377 | 1 | Each |
| 259 | 71.02 | 200 KL | BI01010001010000000000000515BI0100001378 | 4 | Each |
| 260 | 71.03 | 250 KL | BI01010001010000000000000515BI0100001379 | 6 | Each |
| 261 | 71.04 | 300 KL | BI01010001010000000000000515BI0100001380 | 4 | Each |
| 262 | 71.05 | 350 KL | BI01010001010000000000000515BI0100001381 | 2 | Each |
| 263 | 71.06 | 400 KL | BI01010001010000000000000515BI0100001382 | 2 | Each |
| 264 | 72 | Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required such as duck foot bend, bend, tee etc. providing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope of work. | BI01010001010000000000000515BI0100001383 | ||
| 265 | 72.01 | 100 MM | BI01010001010000000000000515BI0100001384 | 507 | Mtr. |
| 266 | 72.02 | 150 MM | BI01010001010000000000000515BI0100001385 | 507 | Mtr. |
| 267 | 72.03 | 200 MM | BI01010001010000000000000515BI0100001386 | 1045 | Mtr. |
| 268 | 72.04 | 250 MM | BI01010001010000000000000515BI0100001387 | 342 | Mtr. |
| 269 | 73 | Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001388 | ||
| 270 | 73.01 | Manually Operated Resilient Seated Sluice Valves of Class PN 1.0/1.6 | BI01010001010000000000000515BI0100001389 | ||
| 271 | 73.02 | 100 MM | BI01010001010000000000000515BI0100001390 | 21 | each |
| 272 | 73.03 | 150 MM | BI01010001010000000000000515BI0100001391 | 28 | each |
| 273 | 73.04 | 200 MM | BI01010001010000000000000515BI0100001392 | 36 | each |
| 274 | 73.05 | 250 MM | BI01010001010000000000000515BI0100001393 | 10 | each |
| 275 | 74 | Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6 | BI01010001010000000000000515BI0100001394 | ||
| 276 | 74.01 | 100 MM | BI01010001010000000000000515BI0100001395 | 22 | each |
| 277 | 74.02 | 150 MM | BI01010001010000000000000515BI0100001396 | 38 | each |
| 278 | 74.03 | 200 MM | BI01010001010000000000000515BI0100001397 | 41 | each |
| 279 | 74.04 | 250 MM | BI01010001010000000000000515BI0100001398 | 13 | each |
| 280 | 75 | Providing and fixing Stain less steel AISI 304 Strainer Cylindrical type for out let, drain pipes of following sizes including all material labour as per Technical Specifications and as per direction of Engineer. ( for outlet and over flow pipe) | BI01010001010000000000000515BI0100001399 | ||
| 281 | 75.01 | 150 mm | BI01010001010000000000000515BI0100001400 | 2 | each |
| 282 | 75.02 | 200 mm | BI01010001010000000000000515BI0100001401 | 26 | each |
| 283 | 75.03 | 250 mm | BI01010001010000000000000515BI0100001402 | 10 | each |
| 284 | 76 | FLOW METER HUT Construction of Room for Flow Meter ( Flow meter hut), work including require earth work, PCC 1:4:8 in foundation and under floor, stone masonary in 1:6 cement sand mortar for foundation up to plinth level ( 0.3 Mtr. above from Average GL), 23 cm th. Brick masonary for super structure in 1:6 cement sand mortar RCC roof of 125 mm th. in M-25 grade cement concrete, CC flooring, MS sheet door, sanctional window shuter, wire gauge for window, 20 mm thick cement plaster out side and in side, water proofing cement paint and synthetic enamel paint on door and window complete as per specification, scope of work and general arrangment Drawing. ( Item Based on PWD BSR Jhunjhunu- Building 2019) | BI01010001010000000000000515BI0100001403 | 27 | each |
| 285 | 77 | Construction of boundary wall of Brick/ stone masonary as per enclosed GA drawing, scope of work and technical specifications complete work in all respect. | BI01010001010000000000000515BI0100001404 | 3240 | RMT |
| 286 | 78 | Providing and fixing steel, gate, grating and grills made of angles, tees, square bars, flats or black pipe with hold fast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide and two coat of enamal paints. | BI01010001010000000000000515BI0100001405 | 3240 | Kg |
| 287 | 79 | Construction of RCC Clear Water Reservoirs of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab, top roof slab and food grade epoxy paint to inner face of the container and slab, including refilling and disposing of surplus stuff , all labour and material charges, providing and fixing accessories such as M.S./Alluminium ladder/RCC Stairs inside and outside, manhole frame and cover, puddle collar, ventilators, satisfactory hydraulic test and water tightness test as per IS code and providing three coats of cement paints on all exposed surface of structure etc. complete in all respect as per design data, criteria, obligatory requirements and detailed specifications, scope of work and GA drawing. The job include painting the name of the scheme and other details on the reservoir and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work. | BI01010001010000000000000515BI0100001406 | ||
| 288 | 79.01 | Rates for RCC Circular Flat Slab CWR, SBC 10T/sqm, seismic zone II . | BI01010001010000000000000515BI0100001407 | ||
| 289 | 79.02 | 500 Kl | BI01010001010000000000000515BI0100001408 | 500 | KL |
| 290 | 79.03 | 1000 Kl | BI01010001010000000000000515BI0100001409 | 1000 | KL |
| 291 | 80 | Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required such as duck foot bend, bend, tee etc. providing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope of work. | BI01010001010000000000000515BI0100001410 | ||
| 292 | 80.01 | 400 mm | BI01010001010000000000000515BI0100001411 | 40 | Mtr. |
| 293 | 80.02 | 200 mm | BI01010001010000000000000515BI0100001412 | 20 | Mtr. |
| 294 | 81 | Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) short body pattern type double eccentric Butterfly valves of approved make of following class & dia complete confirming to BS EN 593/ BS 5155/ IS 13095/1991 amended up to date and of following specifications: Body, disc and end cover of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per DIN 3202 F4/ IS 13095 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on both body and disc inside and outside. Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 304/316 & shaft bearings- bronze/ PTET or Teflon with EPDM/NBR "O" ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. \nNote: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001413 | ||
| 295 | 81.01 | Class PN 1.0/1.6, Manually Operated with Gear | BI01010001010000000000000515BI0100001414 | ||
| 296 | 81.02 | 200 mm | BI01010001010000000000000515BI0100001415 | 2 | Each |
| 297 | 81.03 | 400 mm | BI01010001010000000000000515BI0100001416 | 4 | Each |
| 298 | 82 | SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU) , Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge. \nNote: Rates are exclusive of tail piece / dismantling joints and earth work. | BI01010001010000000000000515BI0100001418 | ||
| 299 | 82.01 | 300 mm | BI01010001010000000000000515BI0100001419 | 3 | Each |
| 300 | 83 | Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) short body pattern type double eccentric Butterfly valves of approved make of following class & dia complete confirming to BS EN 593/ BS 5155/ IS 13095/1991 amended up to date and of following specifications: Body, disc and end cover of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per DIN 3202 F4/ IS 13095 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on both body and disc inside and outside. Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 304/316 & shaft bearings- bronze/ PTET or Teflon with EPDM/NBR "O" ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. \nNote: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001420 | ||
| 301 | 83.01 | Class PN 1.0/1.6, Manually Operated with Gear | BI01010001010000000000000515BI0100001421 | ||
| 302 | 83.02 | 300 MM | BI01010001010000000000000515BI0100001422 | 3 | Each |
| 303 | 84 | Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6\n | BI01010001010000000000000515BI0100001423 | ||
| 304 | 84.01 | 300 MM | BI01010001010000000000000515BI0100001424 | 3 | each |
| 305 | 85 | VALVE CHAMBER- Construction of RCC Valve Chamber of following size including required earth work (PCC M-10, 10 CM th. ) RCC vertical walls in M-25 grade cement concrete of suitable size as per GAD including providing fixing of Reinforced Ferro cement Drain cover designed for class "AA" loading complete as per specification and scope of work. ( Item based on PWD BSR JJN 2016) | BI01010001010000000000000515BI0100001425 | ||
| 306 | 85.01 | Valve Chamber size 1.50X1.20 Valve size up to 200 mm to 300 mm | BI01010001010000000000000515BI0100001426 | 3 | each |
| 307 | 85.02 | Valve Chamber size 1.50X1.80 Valve size up to 350 mm to 450 mm | BI01010001010000000000000515BI0100001427 | 1 | each |
| 308 | 86 | Supply, delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Horizontal Centrifugal Split Casting pumps with motor, CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts etc. complete with all respect as per the specification | BI01010001010000000000000515BI0100001429 | ||
| 309 | 86.01 | Discharge 201to 220 LPS and head 61 to 70 M | BI01010001010000000000000515BI0100001430 | 2 | each |
| 310 | 87 | Supply, delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Horizontal Centrifugal Split Casting pumps with motor, CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts etc. complete with all respect as per the specification | BI01010001010000000000000515BI0100001431 | ||
| 311 | 87.01 | Discharge 20 to 30 LPS and head 31 to 40 M | BI01010001010000000000000515BI0100001432 | 2 | each |
| 312 | 87.02 | Discharge 20 to 30 LPS and head 51 to 60 M | BI01010001010000000000000515BI0100001433 | 2 | each |
| 313 | 87.03 | Discharge 20 to 30 LPS and head 71 to 80 M | BI01010001010000000000000515BI0100001434 | 2 | each |
| 314 | 87.04 | Discharge 31 to 40 LPS and head 61 to 70 M | BI01010001010000000000000515BI0100001435 | 2 | each |
| 315 | 87.05 | Discharge 20 to 30 LPS and head 41 to 50 M | BI01010001010000000000000515BI0100001436 | 2 | each |
| 316 | 87.06 | Discharge 31 to 40 LPS and head 81 to 90 M | BI01010001010000000000000515BI0100001437 | 2 | each |
| 317 | 87.07 | Discharge 31 to 40 LPS and head 41 to 50 M | BI01010001010000000000000515BI0100001438 | 2 | each |
| 318 | 88 | Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001439 | ||
| 319 | 88.01 | Manually Operated Resilient Seated Sluice Valves of Class PN 1.0/1.6 Scution Valves | BI01010001010000000000000515BI0100001440 | ||
| 320 | 88.02 | 150 MM | BI01010001010000000000000515BI0100001441 | 14 | each |
| 321 | 88.03 | 450 MM | BI01010001010000000000000515BI0100001443 | 2 | each |
| 322 | 88.04 | Motorized Sluice Valves with Electric Actuator and integral starter of Class PN 1.6 | BI01010001010000000000000515BI0100001444 | ||
| 323 | 88.05 | 100 MM | BI01010001010000000000000515BI0100001445 | 5 | each |
| 324 | 88.06 | 150 MM | BI01010001010000000000000515BI0100001446 | 30 | each |
| 325 | 88.07 | 350 MM | BI01010001010000000000000515BI0100001447 | 2 | each |
| 326 | 89 | Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) short body pattern type double eccentric Butterfly valves of approved make of following class & dia complete confirming to BS EN 593/ BS 5155/ IS 13095/1991 amended up to date and of following specifications: Body, disc and end cover of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per DIN 3202 F4/ IS 13095 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on both body and disc inside and outside. Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 304/316 & shaft bearings- bronze/ PTET or Teflon with EPDM/NBR "O" ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. \nNote: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001448 | ||
| 327 | 89.01 | Class PN 1.6, Motorised Operated | BI01010001010000000000000515BI0100001449 | ||
| 328 | 89.02 | 350 MM | BI01010001010000000000000515BI0100001450 | 2 | Each |
| 329 | 90 | Providing, lowering, aligning, fixing in position in pipe line, DI double flanged resilient seated Dual plate check valve of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Disc / plates - SG-400/12 or CF-8M, Face to face dimensions as per API: 594 , Flanges Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body and cover inside and outside . Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 304/410 , Hinge SS AISI 316/304,Spring SS AISI 316/304,Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR "O" ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) , Insersion rubber of black EPDM 6mm thick .Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. \nNote: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001451 | ||
| 330 | 90.01 | Class PN 1.6 | BI01010001010000000000000515BI0100001452 | ||
| 331 | 90.02 | 100 MM | BI01010001010000000000000515BI0100001453 | 2 | Each |
| 332 | 90.03 | 150 MM | BI01010001010000000000000515BI0100001454 | 12 | Each |
| 333 | 90.04 | 350 MM | BI01010001010000000000000515BI0100001455 | 2 | each |
| 334 | 91 | SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU) , Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge. \nNote: Rates are exclusive of tail piece / dismantling joints and earth work. | BI01010001010000000000000515BI0100001456 | ||
| 335 | 91.01 | 100 MM | BI01010001010000000000000515BI0100001457 | 1 | each |
| 336 | 91.02 | 150 MM | BI01010001010000000000000515BI0100001458 | 6 | each |
| 337 | 91.03 | 400 MM | BI01010001010000000000000515BI0100001459 | 1 | each |
| 338 | 92 | Providing, installation, testing and commissioning of following Stain less steel AISI 304 Expansion bellows of 10/16 bar rating with tie rods as per technical specifications and layout drawings including jointing material like nuts, bolts, rubber gaskets etc. complete in all respect as per technical specification and direction of Engineer In-Charge. | BI01010001010000000000000515BI0100001460 | ||
| 339 | 92.01 | 100 MM | BI01010001010000000000000515BI0100001461 | 3 | Each |
| 340 | 92.02 | 150 MM | BI01010001010000000000000515BI0100001462 | 32 | Each |
| 341 | 92.03 | 350 MM | BI01010001010000000000000515BI0100001464 | 6 | Each |
| 342 | 92.04 | 400 MM | BI01010001010000000000000515BI0100001465 | 1 | Each |
| 343 | 92.05 | 450 MM | BI01010001010000000000000515BI0100001466 | 2 | Each |
| 344 | 93 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001467 | ||
| 345 | 93.01 | MS pipe specials upto 600mm dia (with minimum 5mm thickness sheet) | BI01010001010000000000000515BI0100001468 | 2680 | Kg. |
| 346 | 94 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths DI standard specials with rubber ring (EPDM)/ nut bolt and insertion sheet and jointing as per IS: 9523-2000 or as amended up to date, such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, taxes, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge (excluding earth work). | BI01010001010000000000000515BI0100001469 | ||
| 347 | 94.01 | A/F Tee , Bend, Reducer (All End Flanged) | BI01010001010000000000000515BI0100001470 | ||
| 348 | 94.02 | Upto 300 mm Diameter | BI01010001010000000000000515BI0100001471 | 496 | Kg. |
| 349 | 94.03 | Above 300mm and up to 600 mm diameter | BI01010001010000000000000515BI0100001472 | 800 | Kg. |
| 350 | 95 | Providing, installation, testing and commissioning of Diaphragm Type Pressure Gauges Dial size 150 mm glycerin filled shatterproof glass, Over range protection: 125% of maximum pressure, Material of sensor and other wetted parts: SS type 316, Housing material: Die cast aluminum | BI01010001010000000000000515BI0100001473 | 8 | each |
| 351 | 96 | Manufacturing, supplying ,lowering, laying and jointing in position to correct line spirally welded SAW/Fabricated MS Pipe having bevelled end plates / coils, confirming to IS 3589-2001 or its latest revision/ amendments, for following thickness and inside diameter, including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.), field joints, satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge; (excluding earthwork, internal lining and outer coating). \nNote : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. | BI01010001010000000000000515BI0100001474 | ||
| 352 | 96.01 | 450 mm 6 mm th. | BI01010001010000000000000515BI0100001475 | 20 | RMT |
| 353 | 96.02 | 500 mm 8 mm th. | BI01010001010000000000000515BI0100001476 | 20 | RMT |
| 354 | 97 | Providing,installation, testing and commisioning of vacuum Feed Gas Chlorinator with all assessories and making connection with existing pipeline required including supply & instalation of trunnion roller support, auxillary container valve, fluxible copper connector, manifold valve, tonner manifold pipes, chlorine Pressure gauge, Isolation valve, gas filter, pressure reducing valve, chlorine gas pipe with fittings, diffuser, lifting beam, load indicator, 25 NB PP diaphragm Valve on injector inlet & outlet, 32 OD uPVC pipe for chlorine solution, 25 NB GI pipe for pump suction & delivery, 25 NB GM gate valve on pump suction & delivery, 25 NB GM 'Y' type stainer on pump suction, 25 NB GM Check valve on pump delivery, pressure gauge with Isolated valve on pump delivery and chlorine booster pump with motor of required capacity complete in all respect as per specification and the direction of the Engineer. | BI01010001010000000000000515BI0100001477 | ||
| 355 | 97.01 | 1 Kg/hr capacity | BI01010001010000000000000515BI0100001478 | 2 | each |
| 356 | 98 | Providing and applying 100% Solids,Rigid, DTM Polyurethane Coating to internal surface of M.S. Pipe as per AWWA C222 standard including preparation of internal surface of pipe by cleaning and abrasive blasting including field joints coating at site complete as per technical specification and direction of Engineer in Incharge. Polyurethane Coating shall be NSF/WARS/SS-375 approved for drinking water. | BI01010001010000000000000515BI0100001479 | 80 | Sqm |
| 357 | 99 | Providing, lowering, aligning, fixing in position and Jointing in pipe line, DI Body Flanged End Tamper proof Kinetic Air Valve of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512/ IS:14845:2000(amended up to date) Body, High pressure cover , Low pressure cover, Cowl and Joint support ring - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865, Float- LP ball & HP ball : AISI 304 stainless Steel, Seat ring & Gasket - EPDM/NBR ,HP Orifice & HP orifice plug : Bronze/ SS ,Bush: Bronze ,Flanges as per IS/ BS, Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body & cover inside and outside .Fasteners - CS/ Galvanised steel, Outlet of big orifice will have a screen to prevent Tamper of float, with DI metal seated D/F Non rising stem. Sluice Valves as per (IS: 14846 amended upto date) PN 1.6 ratings. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.\nNote: Rates are exclusive of connecting tee, pipe piece and earth work. | BI01010001010000000000000515BI0100001480 | ||
| 358 | 99.01 | Class PN 1.6 | BI01010001010000000000000515BI0100001481 | ||
| 359 | 99.02 | 50 mm | BI01010001010000000000000515BI0100001482 | 7 | Each |
| 360 | 100 | Supply, Installation, testing and commissioning of 11 KV Double Pole structure with Air Break Switch having following specifications. a) DP : Double Pole structure made of two nos. 11 meter long PCC poles (400Kg) & 7 nos. MS Channel each of size 100x50x6mm complete with earthing of the structure as per REC standards in all respect with nuts, springs washers, clamps as required. b) GO: Off load type gang operated3-pole Horizontal type switch suitable for 11KV, 400A, 3 phase central post rotating double break isolator complete with MS Hardware, copper moving & fixed contacts, assembly of 9 Nos. Post Insulators, GI pipe of suitable length for operation. c) DO: 3 Nos. Horizontal/Vertical mounted 11KV Horn Gap fuse set / Drop Out fuse set, 11KV barrel fuses mounted on 6 Nos. Post insulators. e) LA: 3 piece non linear resistor type lightening arrestor of approved make suitable for 3 wire, 11KV OH line with rated voltage 9KV rms & nominal discharge current rating of 5 KA & complete with galvanized clamping arrangement, GI bolts, nuts, washers etc. as required. e) Jumpers:3 Nos. ACSR Dog Conductor mounted on pin type insulators as required. The GO shall be operated by hand operated liver properly earthed with provision for locking mounted at 3’. Complete as per technical specifications and /or as directed by engineer. | BI01010001010000000000000515BI0100001484 | 6 | each |
| 361 | 101 | Supply, Installation, Testing and Commissiong of indoor type floor mounted metal clad, 33 KV Incomer VCB panel up to 630 A equipped with following switchgears and accessories designed & tested as per latest standard i.e. IEC 62271-200, suitable for STC 31.5KA/3 and IAC A-FLR for 31.5kA/1sec. Make of HT Panel, Vaccum Interrupter and VCB should be of same make. 33 KV / 110 Volts PT Class 0.5 accuracy and 100 VA burden with 1No. Voltmeter (0-36 KV), analog type, selector switch for voltmeter and protection fuses/MCB for HT metering upto 36 KV on incomer,\nAmmeter, analog type, selector switches for ammeters, Microprocessor based numerical relay with O/L, E/F and S/C protection, Set of dual core dual ratio 3CTs of suitable ratio with secondary 1A,15 VA burden and accuracy Class – 0.5 for metering and class 5P10 for protection, Multifunction Meter. ( Incoming Side)\n | BI01010001010000000000000515BI0100001485 | 3 | Each |
| 362 | 102 | SITC of floor mounted PMCC (Indoor, Dust proff IP-4x front operated with 2 mm thick sheet metal compartmentalised) with all accessible parts, head shrinkable sleeves, SMC/DMC bus bar supports, padlocking facility on outgoing feeders etc. Incommer feeder for (drowout type ) transformer 4000 A, 50KA, ACB 3 pole, Al Bus Bars,Digital Multifunction meter compatable to SCADA,metering,Protection CT's, IDMT 3-O/C & 1-E/F, indicating lamps, control fuse, wiring etc.complete in all respect of the size appxo 900(D)X.2400(H)X1000(D)X | BI01010001010000000000000515BI0100001486 | 2 | Each |
| 363 | 103 | Providing & Laying XLPE insulated IS:7098/II/85 of approved make H.T.cable for working voltage 33 K.V.Earthed with Stranded Compacted Circular Aluminium Conductor, Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated, Insulation Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanised flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable direct in ground including excavation of 30cmx150cm size trench, 25cm layer of river sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection testing etc.as required of size. | BI01010001010000000000000515BI0100001487 | ||
| 364 | 103.01 | 3 core 185.0 Sq.mm | BI01010001010000000000000515BI0100001488 | 300 | Mtr. |
| 365 | 104 | Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of approved make suitable for XLPE insulated 33 KV cable, with required components, prepration of cable ends, testing etc. as required of following sizes. | BI01010001010000000000000515BI0100001489 | ||
| 366 | 104.01 | 3 core 95/120/150/185 Sq.mm | BI01010001010000000000000515BI0100001490 | 6 | Each |
| 367 | 104.02 | 3 core 95/120/150/185 Sq.mm | BI01010001010000000000000515BI0100001491 | 6 | Each |
| 368 | 105 | Supply, Installation, Testing and commissioning of copper wound ISI marked Transformer 33/0.433KV Transformer with OFF load tap changing arrangment on HV side in steps of 8 steps of +/- 10% @2.5% having cable end boxes on HV side & LV side conforming to IS 2026 ( Part I to Part 5) of the following ratings | BI01010001010000000000000515BI0100001492 | ||
| 369 | 105.01 | 400 KVA | BI01010001010000000000000515BI0100001493 | 2 | Each |
| 370 | 105.02 | 200 KVA | BI01010001010000000000000515BI0100001494 | 4 | Each |
| 371 | 106 | SITC of fixed / Draw out/ type 4 pole Air Circuit Breaker conforming to IS 13947 in existing LT panel suitable for LT installation 440 V, 50 Hz and having adjustable short-circuit ,earth fault and over load Thermal magnetic release with at least 4NO & 4NC auxiliary contacts safety shutter and fault position acknowledgement mechanism type, ACB shall have separate indication for service , test , isolation , maintenance position including making connections etc. as required.(Draw out type (Motorised charging) | BI01010001010000000000000515BI0100001495 | ||
| 372 | 106.01 | 800 A Rating , 50 kA | BI01010001010000000000000515BI0100001496 | 3 | Each |
| 373 | 107 | PROVIDING AND FIXING SOFT STARTER in Panel with all accssories required for smooth running of following capacity motors accomodet in cubical floor mountes panal with 1No. Voltmeter (0-36 KV), analog type, selector switch for voltmeter and protection fuses/MCB Ammeter, analog type, selector switches for ammeters, wall/free standerd floor mounted dust and vermin proof compartmentlized cubical panel | BI01010001010000000000000515BI0100001497 | ||
| 374 | 107.01 | 22 KW | BI01010001010000000000000515BI0100001498 | 6 | each |
| 375 | 107.02 | 30 KW | BI01010001010000000000000515BI0100001499 | 2 | each |
| 376 | 107.03 | 37 KW | BI01010001010000000000000515BI0100001500 | 4 | each |
| 377 | 107.04 | 45 KW | BI01010001010000000000000515BI0100001501 | 2 | each |
| 378 | 107.05 | 55 KW | BI01010001010000000000000515BI0100001502 | 2 | each |
| 379 | 107.06 | 200 KW | BI01010001010000000000000515BI0100001503 | 2 | each |
| 380 | 108 | 1000 A ACB (drowout type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 900(W)X2400(H)X1000(D) | BI01010001010000000000000515BI0100001504 | 2 | each |
| 381 | 109 | P/Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. | BI01010001010000000000000515BI0100001505 | ||
| 382 | 109.01 | 3/CX10 sq mm | BI01010001010000000000000515BI0100001506 | 860 | Mtr. |
| 383 | 109.02 | 3/CX16 sq mm | BI01010001010000000000000515BI0100001507 | 80 | Mtr. |
| 384 | 109.03 | 3/CX25 sq mm | BI01010001010000000000000515BI0100001508 | 80 | Mtr. |
| 385 | 109.04 | 3/CX50 sq mm | BI01010001010000000000000515BI0100001509 | 100 | Mtr. |
| 386 | 109.05 | 3/CX120 sq mm | BI01010001010000000000000515BI0100001510 | 100 | Mtr. |
| 387 | 110 | Supply Installation Testing & commissioning of Local Push button Station | BI01010001010000000000000515BI0100001511 | 2 | Each |
| 388 | 111 | Providing & Laying XLPE/PVC PVC insulated & PVC Sheathed armoured control Cable of 1.1 KV grade with copper conductor as per IS 1275 including escavation of 30cmX 75 cm size trench 25 cm thick under layer of sand and lind class of bricks covering | BI01010001010000000000000515BI0100001512 | ||
| 389 | 111.01 | 14CX1.5 sq mm | BI01010001010000000000000515BI0100001513 | 400 | Mtr. |
| 390 | 111.02 | 5CX1.5 sq mm | BI01010001010000000000000515BI0100001514 | 400 | Mtr. |
| 391 | 112 | Supplying and making one end termination with heavy duty double compression brass gland SIBG type, aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. | BI01010001010000000000000515BI0100001515 | ||
| 392 | 112.01 | 3/CX10 sq mm | BI01010001010000000000000515BI0100001516 | 28 | Set |
| 393 | 112.02 | 3/CX16 sq mm | BI01010001010000000000000515BI0100001517 | 4 | Set |
| 394 | 112.03 | 3/CX25 sq mm | BI01010001010000000000000515BI0100001518 | 4 | Set |
| 395 | 112.04 | 3/CX50 sq mm | BI01010001010000000000000515BI0100001519 | 8 | Set |
| 396 | 112.05 | 3/CX120 sq mm | BI01010001010000000000000515BI0100001520 | 4 | Set |
| 397 | 113 | Supply, Fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required. | BI01010001010000000000000515BI0100001521 | ||
| 398 | 113.01 | 600mm x 50mm x 2.0mm | BI01010001010000000000000515BI0100001522 | 300 | Mtr. |
| 399 | 113.02 | 150mm x 50mm x 1.6mm | BI01010001010000000000000515BI0100001523 | 300 | Mtr. |
| 400 | 114 | Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. | BI01010001010000000000000515BI0100001524 | 14 | Each |
| 401 | 115 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. of following size. | BI01010001010000000000000515BI0100001525 | ||
| 402 | 115.01 | 50mm x 6mm G. I. strip | BI01010001010000000000000515BI0100001526 | 300 | Mtr. |
| 403 | 115.02 | 25mm x 3mm Alum. Strip | BI01010001010000000000000515BI0100001527 | 300 | Mtr. |
| 404 | 116 | Miscellaneous items Rubber mat,Danger Plate,lighting, Lugs,steel etc ( Birmi, Niradhanu and malsisar) | BI01010001010000000000000515BI0100001528 | 3 | Lot |
| 405 | 117 | P & F of 440 Volt 3 pole capacitor (AC 6 B ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick discharge damping resistors/ reactors to limit the inrush current , conforming to IS:13947-4-1/IEC:947-4-1, Din rail mounting type including making connections, testing etc. as required. suitable for following capacity capacitor bank. | BI01010001010000000000000515BI0100001529 | ||
| 406 | 117.01 | 31 to 50 KVAR | BI01010001010000000000000515BI0100001530 | 3 | Each |
| 407 | 118 | SITC of IEC, TUV certified, MNRE approved Solar Panels suitable for Rooftop as well as Utility Scale Solar Power Projects with 25 years of Linear Generation warranty. Work includes designing of solar panel area and structure, showing arrangement of panel on available space, installation of PV module structure on shed / roof as per drawings including super structure wherever necessary as per drawin. Mounting structure suitably design to withstand wind velocity upto 150km/hr. Grid Tie Transformer less inverters, Multiple independent MPPTs, Peak efficiency of >98%. Connect up to multiple strings PV arrays, Easy & fast connection, Built-in string-level monitoring, IP65 protection level, Wi-Fi / internet based remote monitoring with 5years warranty. All cabling up to panel and metre, earthing etc. required accessiories and taxes are inclusive. \n \n | BI01010001010000000000000515BI0100001531 | 40000 | Watt |
| 408 | 119 | Supply and erection of Octagonal pole of following length and dimension as per table-3 with base plate on the cement concrete foundation of M-15 /M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III ). The pole shall be made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and\ncommissioning. | BI01010001010000000000000515BI0100001532 | ||
| 409 | 119.01 | 8 mtr. | BI01010001010000000000000515BI0100001533 | 20 | Each |
| 410 | 120 | Supply, Erection and Fixing of hot dipped galvanised Overhang (60 X 3.25 mm) with cap (250 x 137.9 x 4.05 mm) over the existing poles Single arm overhang | BI01010001010000000000000515BI0100001534 | 20 | each |
| 411 | 121 | P & F of IP-66 protected high power LED flood light system with extruded aluminium housing , toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED lamps supplied with pre wired cable of 1 mtr. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumen be maintained. Light output in red , green , blue, cool white or warm white colour as per engineers choice. Fixtures\nshall be CE compliance | BI01010001010000000000000515BI0100001535 | ||
| 412 | 121.01 | High power LED flood light 60 watt | BI01010001010000000000000515BI0100001536 | 20 | each |
| 413 | 122 | Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA with HART / Diaphragm: SS316L / Process Connection: 1/2 "NPT (M) / Accuracy: 0.15% Protection: IP67\n1/2" M (NPT) | BI01010001010000000000000515BI0100001538 | ||
| 414 | 122.01 | For Measuring Level of OHSR and for pumps at common header | BI01010001010000000000000515BI0100001539 | 27 | each |
| 415 | 123 | Providing, Installation, Testing and Commissioning of MAGNETIC FLOW METER for Water Application: Liner: Polyurethane or Hard Rubber / Electrode MOC: SS316L or CS /Housing : Die Cast Aluminium or CS / Power Supply: 90-230 V AC / Output: 4-20mA with HART / Sensor Cable : 10 mt / Flow Tube or Sensor housing protection IP68 / Process Flange : SS316 / Display : 3 1/2 LCD Display / Cable Connection : 1/2"NPT /Accuracy : 0.5% | BI01010001010000000000000515BI0100001540 | ||
| 416 | 123.01 | 80 mm dia | BI01010001010000000000000515BI0100001541 | 1 | each |
| 417 | 123.02 | 100 mm dia | BI01010001010000000000000515BI0100001542 | 7 | each |
| 418 | 123.03 | 150 mm dia | BI01010001010000000000000515BI0100001543 | 7 | each |
| 419 | 123.04 | 200 mm dia | BI01010001010000000000000515BI0100001544 | 5 | each |
| 420 | 124 | RTU complete with DI, DO, AI and modbus communication ports and power supply (24 V, DC) | BI01010001010000000000000515BI0100001545 | ||
| 421 | 124.01 | At OHSR's and At VTC | BI01010001010000000000000515BI0100001546 | 137 | each |
| 422 | 125 | Supply, installation, testing and commissioning of MNRE approved off Grid Solar Panels for running of motor pumps with 25 years of Linear Generation warranty, Work includes designing of solar panel area and MS frame and foundation on ground/roof of Pump house or CWR, showing arrangement of panel in available space, installation of PV module on MS frame as per approved design and drawings. Mounting structure shall be suitably design to withstand wind velocity up to 150km/hr. The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge. Note: There shall be 5 year service warranty for solar panel and mounting structure and suitable provision shall be included in tender document. | BI01010001010000000000000515BI0100001547 | ||
| 423 | 125.01 | For ESR and VTC (18x1000+117x500=7650watt) 145 panals | BI01010001010000000000000515BI0100001548 | 76500 | watt |
| 424 | 126 | Battary Bakup for SDADA Oparating | BI01010001010000000000000515BI0100001549 | 137 | each |
| 425 | 127 | Providing and laying Stranded/ Flexible Annealed Bare copper conductor ,XLPE/PVC insulated suitably laid up together overall polyester taped Al (Mylar tape wrapped) along with ATC Drain wire overall PVC sheathed (ST-1) overall screened Pair armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009. | BI01010001010000000000000515BI0100001550 | ||
| 426 | 127.01 | 2 pair | BI01010001010000000000000515BI0100001551 | 3840 | mtr |
| 427 | 128 | Design, manufacture, supply, installation, testing and Wiring + TB etc – 1 lot Hardware – 1 lot HMI – 4 num Operator Station including, Core i5 processor, 8 GB DDR-3 RAM, 500 GB HDD, DVD RW Drive, RS- 232/485 Ports, 1 Parallel Port, 4 nos. USB Port, 2x Ethernet Cards, Keyboard, optical mouse, 32'' monitor, Latest windows professional ver., etc. – 2 num Programming and troubleshooting software for HMI – OWS – 1 lot Colour Printer A4, Lasejet – 1 num commissioning of indoor type PLC panel of size approx. 1100 mm X 800 mm X 2100mm (LBH) , fabricated out of min. 2 mm thick CRCA sheet complete with Operator Station (PC) including, necessary programming software for PLC & SCADA and comprising of all required accessories not limited to the following: Programmable Logic Controller (PLC) with Dual redundant CPU, Power supply module for IO & Processor rack (Standard DC), Back up Interface/Expansion Module(BCM/BEM), Rack (Backplane) 10 slots for IO and Processor – 1 lot DI – 432 num DO - 264 num AI – 48 num AO – 24 num Ethernet Switch – 4 num MCB 10A DP – 2 num MCB4ADP – 4 num, MCBSP2A – 12 num, MCB 1A DP – 20 num, 24 VDC Power Supply 10A – 1 num, Push Buttons – 45 num, Selector Switch – 25 num, Control Relays – 200 num, Annunciator with 24 Windows NO to NC Type, Microprocessor Based, Window Size 75*42mm, 110VAC, with Electronic Hooter – 1 num, Control Transformer – 2 num, Emergency PB – 2 num, Panel Cooling Fan – 2 num, Panel Light with Door Switch – 2 num, Control Indication Lamp – 45 num | BI01010001010000000000000515BI0100001552 | 1 | LOT |
| 428 | 129 | Design, manufacture, supply, installation, testing and Wiring + TB etc – 1 lot, Hardware – 1 lot HMI – 2 num, Operator Station including, Core i5 processor, 8 GB, DDR-3 RAM, 500 GB HDD, DVD RW Drive, RS- 232/485 Ports, 1 Parallel Port, 4 nos. USB Port, 2x Ethernet Cards, Keyboard, optical mouse, 32'' monitor, Latest windows professional ver., etc. – 02 num Programming and troubleshooting software for HMI – OWS – 1 lot Colour Printer A4, Lasejet – 1 num commissioning of indoor type PLC panel of size approx. 1100 mm X 800 mm X 2100mm (LBH) , fabricated out of min. 2 mm thick CRCA sheet complete with Operator Station (PC) including, necessary programming software for PLC & SCADA and comprising of all required accessories not limited to the following: Programmable Logic Controller (PLC) with Dual redundant CPU, Power supply module for IO & Processor rack (Standard DC), Back up Interface/Expansion Module(BCM/BEM), Rack (Backplane) 10 slots for IO and Processor – 1 lot, DI – 288 num, DO – 176 num, AI – 32 num, AO – 16 num, Ethernet Switch – 3 num , MCB 10A DP – 1 num, MCB4ADP – 2 num; MCBSP2A – 10 num, MCB 1A DP – 15 num, 24 VDC Power Supply 10A – 1 num, Push Buttons – 30 num, Selector Switch – 15 num, Control Relays – 150 num, Annunciator with 24 Windows NO to NC Type Microprocessor Based, Window Size 75*42mm, 110VAC, with Electronic Hooter Control Transformer – 1 num, Emergency PB – 1 num, Panel Cooling Fan – 1 num, Panel Light with Door Switch – 1 num, Control Indication Lamp – 30 num | BI01010001010000000000000515BI0100001553 | 2 | LOT |
| 429 | 130 | Repairing of Existing VTC and Valve Cambers | BI01010001010000000000000515BI0100001555 | 1 | job |
| 430 | 131 | Repair of Pump house building at Birmi and Niradhanu like repair of plaster, floor, roof, doors, windows, color washing, painting etc. | BI01010001010000000000000515BI0100001556 | 1 | Job |
| 431 | 132 | Repair of Residantial building at Birmi and Niradhanu like repair of plaster, floor, roof, doors, windows, color washing, painting etc. | BI01010001010000000000000515BI0100001557 | 1 | Job |
| 432 | 133 | Repair of Boundry wall at Birmi, Niradhanu including provinf fixing of borbed wire fancing repair of gates et. | BI01010001010000000000000515BI0100001558 | 1 | Job |
| 433 | 134 | providing service connection as per technical specification and standard drawing as\nper relevant IS code (amended up to date) from all kind of water mains up to consumer meter/premises (Complete job).This job includes digging out suitable size of pits and French for laying service line in all kinds of soil including demolishing of cement concrete ,WBM, Black top etc. of all thickness; cutting of CC road/jhiri by using a concrete cutter machine; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 meter ; providing & fixing of all fitting duly approved in accordance with ISO/DTR 9080 as per specification for potable water including approved make of MS/PVC clamp with saddle ,piece, gunmetal ferrule 4.0 mm (ISI make) , valve (IS: 778) and specials with MDPE pipe PE 80 PN 12.5 as per ISO 4427 below ground level and P&F GI pipe 15 mm dia class B (ISI mark) above ground level in the premises for fixing tap ( max. len 1 2.0 mtr), P&F a 15 mm Bib cock with foam flow chrome plated with compl to brass body including brass handle having good quality with wt 300 to 325 gm ,including accessories with flushing, cleaning, disinfecting and testing of pipe ine complete required for making of service connection complete in all respect including labour charges . In addition to the ferrule, an orifice of 4.0 mm dia should• also be provided in the service line at the entry point of the consumer's property i such a way that it should be accessible for inspection to VWSC, PHED and any o I er authority which would like to inspect as and when required. The service line should be laid at least 45 cm below ground level, except in case of concrete/bitumin1 us roads where minimum depth shall be 20 cm. \nFor detailed specifications, of MDPE pipes please refer section "Technical Specifications" of bid document General specifications •f MDPE pipes shall be.as under:\n• The raw material shall be virgin PE 80 Blue comp,und and comply with the requirements of ISO/Directive of testing material : 90 0 with minimum required strength of 8 Kg/sq.cm.\n• The raw material shall be Food grade quality Pressure rating shall be 12.5 Bar.\n• The pipes shall bear ISO marking.\n\n | BI01010001010000000000000515BI0100001560 | ||
| 434 | 134.01 | Average length up to 05 mtr 20 mm dia MDPE pipe and 02 mtr 15 mm GI pipe FHTC \nclass B.\n | BI01010001010000000000000515BI0100001561 | 29691 | Each |
| 435 | 135 | Cost of Construction of Rain water harvesting structure at Head work, Malsisar, Birmi and Niradhanu. ( Roof top and campus road water) | BI01010001010000000000000515BI0100001563 | 1 | Lot |
| 436 | 136 | O&M of scheme as per detail specifications and scope of work for 10 year after one year DLP | BI01010001010000000000000515BI0100001564 | ||
| 437 | 136.01 | Ist Year (Defect Libility Period) | BI01010001010000000000000515BI0100001565 | ||
| 438 | 136.02 | 2nd Year | BI01010001010000000000000515BI0100001566 | 12 | Month |
| 439 | 136.03 | 3rd Year | BI01010001010000000000000515BI0100001567 | 12 | Month |
| 440 | 136.04 | 4th Year | BI01010001010000000000000515BI0100001568 | 12 | Month |
| 441 | 136.05 | 5th Year | BI01010001010000000000000515BI0100001569 | 12 | Month |
| 442 | 136.06 | 6th Year | BI01010001010000000000000515BI0100001570 | 12 | Month |
| 443 | 136.07 | 7th Year | BI01010001010000000000000515BI0100001571 | 12 | Month |
| 444 | 136.08 | 8th Year | BI01010001010000000000000515BI0100001572 | 12 | Month |
| 445 | 136.09 | 9th Year | BI01010001010000000000000515BI0100001573 | 12 | Month |
| 446 | 136.1 | 10th Year | BI01010001010000000000000515BI0100001574 | 12 | Month |
| 447 | 136.11 | 11th Year | BI01010001010000000000000515BI0100001575 | 12 | Month |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
