}

Provision Of Station Store And Covered Drainage For Rain Water And Solar Light At Various Sub Station At Vairengte And Lailapur Military Station Under Ge Silchar, VAIRENGTE AND LALAPUR-Mizoram

Military Engineer Services-MES has published Provision Of Station Store And Covered Drainage For Rain Water And Solar Light At Various Sub Station At Vairengte And Lailapur Military Station Under Ge Silchar. Submission Date for this Tender is 15-03-2021. Solar Light Tenders in VAIRENGTE AND LALAPUR Mizoram. Bidders can get complete Tender details and download the document.




Tender Notice

27164910
Corrigendum : Provision Of Station Store And Covered Drainage For Rain Water And Solar Light At Various Sub Station At Vairengte And Lailapur Military Station Under Ge Silchar
Open Tender
Indian
Mizoram
VAIRENGTE AND LALAPUR
15-03-2021

Tender Details

Provision Of Station Store And Covered Drainage For Rain Water And Solar Light At Various Sub Station At Vairengte And Lailapur Military Station Under Ge Silchar

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 08-Mar-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 15-03-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 46000.0 /-
Tender Value
Refer document

BOQ Items

PROVN OF STATION STORE AND COVERED DRAINAGE FOR RAIN WATER AND SOLAR LIGHT AT VARIOUS SUB STATION AT VAIRENGTE AND LAILAPUR MILITARY STATION UNDER GE SILCHAR
Sl. No. Item Description Item Code / Make Quantity Units
1 1 PART-I (B/R WORKS)\nRough excavation not exceeding 1.5 m deep and getting out and getting out in any soft / loose soil complete all as specified and directed. 66.68 Cum
2 2 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 52 Sqm
3 3 Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level complete all as specified and directed. 4 Cum
4 4 Excavation in post holes (or similar holes) each n exc 0.5 Cum getting out soft/ disintegrated rock returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and makind good surface complete all as specified and directed. 10 Each
5 5 Excavating in trenches, nexc 1.5 m wide and nexc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed. 6 Cum
6 6 M&L for PCC 1:4:8 type D2 (using 40mm stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. 12.59 Cum
7 7 Material and labour for providing Reinforced Cement Concrete M-25 (Design mix) using 20 mm graded aggregate as in walls, retaining walls, basement walls, walls of RCC drains and similar works including attached pilasters, buttresses complete all as specified and directed. 31.68 Cum
8 8 Material and labour for providing Reinforced Cement Concrete M-25 (Design mix) using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed. 29.44 Cum
9 9 Material and labour for providing Reinforced Cement Concrete M-25 (Design mix) using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. 2 Cum
10 10 Material and labour for providing Reinforced Cement Concrete M-25 (Design mix) using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m complete all as specified and directed. 2.31 Cum
11 11 M&L for providing RCC 1:2:4, type B1, using 20mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands including use and waste of formwork (straight or curved) complete all as specified and directed. 0.1 Cum
12 12 Material and labour for 10mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. 5562.34 Kg
13 13 Material and Labour for mild steel TMT bar 5mm dia and over, upto and including 10mm dia incl cutting, bending, binding as reqd in stirrups, spacers and binders complete all as specified and directed 277 Kg
14 14 Material and Labour for TMT bar 6mm to 8mm dia cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secruing with clips complete all as specified and directed 707 Kg
15 15 M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and directed. 39.44 Sqm
16 16 M&L for Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed. 36 Sqm
17 17 M&L for Form work to sides and soffits of floor or roof beams, beam hunching, girders, lintels, cantilevers, shelves including supports, etc for rough finished flat surfaces of concrete complete all as specified and directed. 31.68 Sqm
18 18 Use and waste formwork to edges of concrete flats, treads, window cills and sides of RCC/PCC bands in walls horizontal or sloping and similar works exc 10 cm but n.exc 20cm wide in rough finished flat surfaces complete all as specified and directed. 45 RM
19 19 M&L for Formwork to faces of walls, parapets, walls of RCC drains and similar works including attached pillasters, buttresses, etc.; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed. 318.4 Sqm
20 20 M&L Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. 3.5 Cum
21 21 M&L for half brick work with sub class 'B' bricks straight or curved on plan to radius built in cement mortar 1:4 complete all as specified and directed. 68 Sqm
22 22 Supply and fix Steel work in trusses, purlins, posts (including cleats, base plates etc) and the like using tubular/ square hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 respectively grade St.-240 complete all as specified and directed 455 Kg
23 23 S&F Mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each exc 5cm but n.exc 10cm long dia 11 to 15mm necessary fitting complete all as specified and directed. 10 Kg
24 24 S&F plates (plain or chequered) channels, square cut or notched (ordinay and counter sunk) forming holes, without any attachment of Fe 410W (Gde-E -250) Quality 'A' complete all as specified and directed. 12 Kg
25 25 S & F bands, straps, clamps, cleats, holdfasts & similar small articles, supports or stays for rainwater, ventilating pipes, including bolts etc conforming to Fe-290 Gde-E-165 complete all as specified and directed. 18 Kg
26 26 M&L Plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in bed blocks, coping, cills, steps, kneelers, bed plates, apex stones kerbs benching and similar work including necessary form work complete all as specified and directed. 0.08 Cum
27 27 Returning filling in incl watering, ramming in layers n.exc. 25cm thick in soil complete all as specified and directed. 3.15 Cum
28 28 Removing excavated surplus soil to a distance n.exc. 50m and depositing where directed at level n.exc. 1.50m above the starting point complete all as specified and directed. 41.39 Cum
29 29 S&F Prepainted galvalume aluminium zinc coating steel based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof coverings/ claddings to wall, fixed with self tapping screws complete all as specified and directed. 50 Sqm
30 30 S&F Prepainted galvalume aluminium zinc coating steel based plain steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof coverings/ claddings to wall, fixed with self tapping screws complete all as specified and directed. 11 Sqm
31 31 Supply and Fix Framed work as in doors or gates of angle or other section conforming to Fe-410W (Gde-E-250) quality-A with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. 80 Kg
32 32 S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and or riveted, or forged in to spikes; framed guard bars; similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. 37 Kg
33 33 M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair faces of brick wall or condrete surfaces in CM (1:3) & water proofing compound mixed with second layer @ 3% finished even and smooth using extea cement. \nNote -WPC shall be measured and paid separetly. 326.68 Sqm
34 34 Supply only WPC complete all as specified and directed. 27 Kg
35 35 Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) on wall surface and finishing even and fair complete all as specified and directed 64 Sqm
36 36 S & F 30 mm thick 2nd class Hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. 2.2 Sqm
37 37 M&L 2nd class hard wood, 30 mm thick, glazed and skeleton shutter, divided into square, with plain, chamfered or rounded mitered and , any number of panels, prepared to receive glass, gauge etc. edges of frames chamfered or round size of numbers of shutters as specifed in SSR Part-I section clause 8.24 (a) complete all as specified and directed. 3.2 Sqm
38 38 S&F 3 mm thick sheet glass ordinary quality and glazing with oil putting square n. exc 0.5 sqm in each pane complete all as specified and directed. 2.5 Sqm
39 39 S&F Aluminium anodized barrel tower bolt of extruded section and fixed complete of size 150mm long complete all as specified and directed. 2 Each
40 40 S&F Aluminium anodized barrel tower bolt of extruded section and fixed complete of size 100mm long complete all as specified and directed. 6 Each
41 41 S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size, complete all as specified and directed. 6 Each
42 42 S&F Butt hinges, medium weight, cold rolled mild steel, 75 mm size, complete all as specified and directed. 12 Each
43 43 Mild steel sliding door bolt, 300 mm, plate type, stove enameled black, with bright bolt not less than 12 mm dia, with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed. 1 Each
44 44 S&F 150mm extruded aluminium alloy handles D type anodized complete all as specified and directed. 4 Each
45 45 S&F 100mm extruded aluminium alloy handles D type anodized complete all as specified and directed. 6 Each
46 46 M & L for 75 mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as sub base in floor complete all as specified and directed 33 Sqm
47 47 Material and labour for 15 mm thick Screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and directed. 33 Sqm
48 48 Material and labour for 10mm thick rendering in cement mortar (1:4) for receiving tiles in vertical surfaces all as specified and directed. 3 Sqm
49 49 M&L for machine cut kota stone slab flooring 20-25 mm thick jointed in grey cement slurry mixed with pigment to match the shade of the slab as in flooring incl rubbing and mirror finish polishing complete including 20mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed. 33 Sqm
50 50 M&L for machine cut kota stone slab flooring 20-25 mm thick jointed in grey cement slurry mixed with pigment to match the shade of the slab as in skirting dado incl rubbing and mirror finish polishing complete including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed. 3 Sqm
51 51 Supply and fix anodised aluminium snap grid frame work for false ceiling all as specified with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including 4 mm thick pre-painted decorative Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed. 33 Sqm
52 52 Material and labour for preparation of newly plastered surfaces and applying two coats of cement based paint over one coat of alkali resistant primer complete all as specified and directed. 97 Sqm
53 53 Material and Labour for applying two coats of oil bound distemper over one coat of primer on walls including preperation of new or previously untreated surfaces complete all as specified and directed. 64 Sqm
54 54 M&L for Hardcore of broken stone of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed. 1.4 Cum
55 55 M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid shall be alternate panels and joints filled with bituminous 1 part and 3 part of sand complete all as specified and directed. 13 Sqm
56 56 M&L for Preparation of new or untreated surfaces of wood or wood based surfaces of any description exc.10 cm. in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. 10 Sqm
57 57 M&L for Preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide primer, complete all as specified and directed. 2.2 Sqm
58 58 M&L for Preparation of new or untreated steel surface of any description n exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide primer, complete all as specified and directed. 2.1 10 RM
59 59 M&L for providing precast reinforced cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates as in cover slabs for manholes, drains, shelves etc and set in cement mortar (1:6) complete all as specified and directed. 8.71 Cum
60 60 M&L for finishing cement concrete surface even and smooth using extra cement complete all as specified and directed. 229.68 Sqm
61 61 Removing excavated material exc. 50m but n. exc 250 m and depositing where directed at a level n exc. 1.5 m above the starting point in soils complete all as specified and directed. 62.68 Cum
62 62 Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base in soils complete all as specified and directed. 66.88 Cum
63 63 Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., exc. 1.5 m but not exc. 3 m high from base in soils complete all as specified and directed. 36.15 Cum
64 64 PART-II (E/M WORKS)\nMaterial and labour for Point wiring using approved colour coding as per IS with stranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc ISI marked, PVC rectangular boxes suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-
65 64.01 One light point controlled by one, one way switch 5 Amps 8 Point
66 64.02 One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator. 4 Point
67 64.03 One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. 2 Point
68 64.04 One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. 2 Point
69 65 All as per item No. 64 herein before but for one three pin 15 Amps socket outlet on independent board with 1100V grade PVC insulated and unsheathed 2.5 Sqmm standed FRLS copper conductor cable and PVC insulated and sheathed copper conductor 2.5 Sqmm as earth continuity conductor draw in incl concealed PVC conducit medium grade ISI marked not less than 20 mm dia with conduit fittings and accs incl anodized pressed steel boxed suitable for switches and sockets as per requirement at site complete all as specified and directed. 4 Point
70 66 S&F switch piano flush type 5 Amp single pole one way complete all as specified and directed. 14 Each
71 67 Supply and fix socket outlet 3/5 pin 5 Amps flush type complete all as specified and directed. 2 Each
72 68 Supply and fix switch socket combination 2 pin and 3 pin 5 Amps 2 in 1 universal plate complete all as specified and directed. 2 Each
73 69 Supply and fix switch socket combination 3 pin 5 amp and 3 pin 15 Amps 2 in 1 universal plate complete all as specified and directed. 4 Each
74 70 S & F ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts AC supply complete all as specified and directed. 2 Each
75 71 Supply and fix ceiling rose surface bakelite with three terminals complete all as specified and directed. 8 Each
76 72 M&L for fan hook fabricated with MS flat 25 x 6 mm 300 mm long 02 Nos bend to shape drilled with holes and MS nuts, bolts and washers of required side with one coat of primer and two coats of paints complete all as specified and directed. 2 Each
77 73 Supply and fixing ceiling Fan in repairs of size 1200 sweep 1200 RPM, BEE 5 star rated complete all as specified and directed.\n 2 Each
78 74 Supply and fixing fresh Air fan heavy duty of 250 mm sweep 1200 RPM, BEE 5 star rated complete all as specified and directed.\n 2 Each
79 75 S & F LED linear light fittings 20 Watt basic all purpose surface and wall mounted and LED batten with polycarbonate housing and intrigated electronic driver and connecting with 3 core flexible copper cable PVC insulated of size 16/0.20 mm etc complete all as specified and directed. \nMake:- Havells Cat No. LHEWEBP7IN1W020 or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton Greaves 4 Each
80 76 Supply and fix bulk head fitting LED type comprises of pressure die cast housing acrylic diffuser and frame complete of 10 watt complete all as specified and directed. \nMake:- Havells Cat No. RUGBYNEONFT10WLED760SSYMBOPC of Havells or equivalent to Bajaj/Philips/ Wipro/ Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton Greaves 2 Each
81 77 Supply and fix lamp Angular holder insulated body with back plate suitable for batten fittings complete all as specified and directed. 2 Each
82 78 Supply and fix LED lamp/bulb type of 10 Watt complete all as specified and directed. 2 Each
83 79 Supply and fix sheet metal enclosure for DB's SPN with 200 Amps rated bus bar 240Volts, 08 way double door etc complete all as specified and directed. 1 Each
84 80 Supply and fix MCB SPN 40 Amps 240 Volts 'C' series complete all as specified and directed. 1 Each
85 81 Supply and fix MCB SP 6 to 40 Amps 240 Volts 'C' series complete all as specified and directed. 6 Each
86 82 Material and labour for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C1, 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance not exceeding 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES Schedule 2009, Part-I complete all as specified and directed. 1 Each Set
87 83 Supply laying and testing cable XLPE insulated screened PVC beeded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, cross sectional area 10 Sqmm 2 core complete all as specified and directed.\n 40 RM
88 84 Supply and fix tube 'Light Grade' of size 40mm dia galvanised with all fittings laid to walls and ceiling laid in floor complete all as specified and directed.\n 2 RM
89 85 Supply, fix, commissioning and testing of Lithium based Energy Efficient Integrated Solar post top light of 24-30 Watt, IP-65 protection, with clamps, suitable for pole/wall mounting complete all as specified and directed.\nMake: Axxon Tech/Tata Power Solar/Crompton Greaves/ Bajaj/Philips 4 Each
90 86 S&F locally fabricated steel tubular pole make out of heavy duty MS pipe of 50mm dia and height not less than 4 meter with base plate and top cover, duty painted by synthetic paint of approved colour suitable for mounting of solar post top light fitting complete all as specified and directed.\nNote: Excavation and concreting for grouting of pole shall be deemed incl in coated rate. 4 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail