}

Construction Of Check Dam Schemes Of Raydi Kustore Check Dam Cd 31 Mouza Raydi Kustore , Block Mejia In The District Of Bankura Under Wbadmip, BANKURA-West Bengal

Water Resources Department-WRD has published Construction Of Check Dam Schemes Of Raydi Kustore Check Dam Cd 31 Mouza Raydi Kustore , Block Mejia In The District Of Bankura Under Wbadmip. Submission Date for this Tender is 27-03-2021. Check Dam Tenders in BANKURA West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

27114053
Construction Of Check Dam Schemes Of Raydi Kustore Check Dam Cd 31 Mouza Raydi Kustore , Block Mejia In The District Of Bankura Under Wbadmip
Open Tender
Indian
West Bengal
BANKURA
27-03-2021

Tender Details

Construction Of Check Dam Schemes Of Raydi Kustore Check Dam Cd 31 Mouza Raydi Kustore , Block Mejia In The District Of Bankura Under Wbadmip

Key Value

Document Fees
Refer document
EMD
INR 190000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Construction of RAYDI,KUSTORE,CHECK DAM-31 at Mouza:- RAYDI,KUSTORE , J.L NO:- 044,026 G.P:KUSTORA, Block:-MEJIA, Dist :- Bankura
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. BI01010001010000000000000515BI0100001123 4139.59 CUM
2 2 Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity).( B.) Do - by Fine sand.[PWD S.O.R-2017 Vol. I,Page No 2, Item no 4 (B) ] BI01010001010000000000000515BI0100001124 265.361 CUM
3 3 Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.[PWD S.O.R-2017 Vol. I,Page No .47, Item no. 3] BI01010001010000000000000515BI0100001125 1085.06 SQM
4 4 Ordinary Cement concrete (mix 1:2:4) with grade stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (d) With local hard blackstone variety chips (crusher broken)[PWD S.O.R-2017 Vol. I,Page No 24, Item no 4(d) & revised in 3rd CORRIGENDA & ADDENDA DATED 04.06.2018, Page No.-10 of 96 ] BI01010001010000000000000515BI0100001126 1299.35 CUM
5 5 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor).(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work . BI01010001010000000000000515BI0100001127 1515.98 SQM
6 6 Bailing or pumping out water from foundation trenches. [PWD S.O.R-2017,Page No 4, Item no 7 ] BI01010001010000000000000515BI0100001128 1600 HP-HR
7 7 Supplying & laying of PVC Water-Stopes (as per IS 15058:2002) approved by E.I.C at contraction joints with all materials complete.[Rate is approved by DPD Technical DPMU,Bankura] BI01010001010000000000000515BI0100001129 84.5 M
8 8 Labour for Chipping of concrete surface before taking up Plastering work.[PWD S.O.R-2017, Page No 192, B. MISCELLANEOUS ITEMS Item no. 1] BI01010001010000000000000515BI0100001130 129.8 SQM
9 9 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface][PWD S.O.R-2017, Page No 189, Item no 1 (ii/a)] BI01010001010000000000000515BI0100001131 129.8 SQM
10 10 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.\nNOTE:Cement 0.152 cu.m per100 sq.m.[PWD Schedule Page No 192, Item no 15] BI01010001010000000000000515BI0100001132 129.8 SQM
11 11 Supply of stone / laterite boulders at site including cost of material, loading, unloading and carriage and including all incidental charges like Royalty,complete. (Royalty certificate in original from concerned authority are to be submitted along with the bill)\nRate Analysis.Supply of laterite boulder at site .[ I & W schedule Page C-27, sl.no.- 2.94(c)] BI01010001010000000000000515BI0100001133 311.85 CUM
12 12 Labour charges for laying boulder/ shingles in apron or within wire netting of sausage for slope pitching including carriage upto 30 metre and all lifts & dressing the exposed faces etc. complete as per direction of the Engineer-in-charge. I) Boulder [I&W USoR Page C-17, sl.no.- 2.48 ] BI01010001010000000000000515BI0100001134 311.85 CUM
13 13 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work).[PWD SoR: 2017, VOL-I B. MISCELLANEOUS ITEMS Page No. 1, Item no 3 ] BI01010001010000000000000515BI0100001135 425.386 CUM
14 14 Caulking joints of laterite / stone boulder or Brick pitching with cement mortar 1:4 and flush pointing as per direction of the Engineer-in-charge.\n(a) Stone / laterite boulder pitching[I&WD USoR Page No. C-20 Chapter -2 Item No. 2.65] BI01010001010000000000000515BI0100001136 270 SQM
15 15 Providing weep holes in Brick masonry / Plain / Reinforced concrete abutment, wing wall / return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications. PWD (WB), Schedule of Rates : 2018 ,Volume III: Road & Bridge Works,CHAPTER - 13 SUB-STRUCTURE ,Page-304,Item No. -13.03 BI01010001010000000000000515BI0100001137 48 EACH
16 16 Supplying empty cement bag in good condition.PWD (WB), Schedule of Rates : 2018 ,Volume III: Road & Bridge Works,CHAPTER - 18 MISCELLANEOUS WORKS ,Page-336,Item No. -18.28 BI01010001010000000000000515BI0100001138 900 EACH
17 17 Labour charges for filling empty cement gunny bag / polythene bag (capacity 50kg) with all kinds of earth (wet or dry), sand or agreegates (stone / brick) and sewing as done incase of cement bags, (tying with a knot after filling will not be accepted), and stacking with in a lead of 30 metre as per direction of Engr-in-charge (cost is excluding the cost of any types of filling materials). NB:- Volume of earth / sand filled bags should not be less than 0.028 cum/ bag.[I&WD USoR Page No. C-12 Chapter -2 Item No. 2.27 ] BI01010001010000000000000515BI0100001139 900 EACH
18 18 Dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts.[USoR I&WD Item No. 2.29 Chapter -2 Page No. C-12] BI01010001010000000000000515BI0100001140 900 EACH
19 19 Supplying RC spun pipe (NP2) and matching collar as per specification including carriage upto a distance of 50 km from factory, loading, unloading and stacking properly at destination. A) 45 cm bore dia .[Pg 128, sl.no.- 5.31) of I & W schedule ] BI01010001010000000000000515BI0100001141 7 M
20 20 Labour charges for laying, fitting and fixing RCC spun pipes with collars (NP2) canal banks, roads, including caulking the joints of collar as and when necessary with cement morter(prop 1:2) jute & bitumen etc. as approved including preparing subgrade, curing including cost & carriage of sand and cement of etc complete(excluding cost & carriage of pipes & collars from Departmental stack yard)I&WD K.C Schedule Item No. 4, Page No-21. BI01010001010000000000000515BI0100001142 7 M
21 21 Supplying, fitting, fixing Mild Steel draw shutter with Mild Steel plate of thickness as specified by the Engineer-in-charge and other necessary Mild Steel sections for sluice including fabricating the same (as per drawing and instruction given by the Engineerin-charge) excluding cost of Mild Steel guide channel, sill beam, gearing arrangement etc. but including painting with two coats of anticorrosive bituminous paint of approved make & brand over two coat of red lead primer and with necessary masonry work with all materials supply etc. complete at site.[I&WD USoR Page No. C-31, sl.no.- 3.11 ] BI01010001010000000000000515BI0100001143 598.02 KG
22 22 Supplying, fitting and fixing of Mild Steel Guide Channel with necessary Mild Steel lugs of required length and size by making hole into wall and fixing with necessary masonry work with maintaining proper line and level as directed by the Engineer-incharge. This item includes two coats of anti-corrossive bituminous paint over two coats of red lead primer. Payment will be made on actual length of Guide Channel. BI01010001010000000000000515BI0100001144 251.16 KG
23 23 Supplying Gun Metal Bush for screw gearing arrangement required for hanging arrangement of draw shutter and fitting & fixing with the screw gearing operating the draw shutter etc. complete as per direction of the Engineer-in-charge. (a) 50 mm dia. BI01010001010000000000000515BI0100001145 2 EACH
24 24 Supplying, fitting & fixing Cast Iron wheel , rim made of 28 mm. to 36 mm. dia to fit any size of gear rod including carriage to site, painting with two coats of bituminous paint over two coats of red lead primer etc. complete as per direction of the Engineer-in-charge.(a) 45 cm dia. BI01010001010000000000000515BI0100001146 2 SET
25 25 Supplying/Replacing Gear rod by a new Mild Steel Gear rod, threaded length as required and fitting, fixing in position with screw gearing arrangement for operating the draw shutter as per direction of the Engineer-in-charge.(The old materials to be returned to departmental godown.)(a) 50 mm. dia . BI01010001010000000000000515BI0100001147 8.75 M
26 26 Supplying, fitting & fixing in position rubber seal arrangement for making water tight including M.S.flats, bolts and nuts and making holes in the shutter leaf for fixing the rubber seal in position including fabrication cost and carriage of all materials to site and complete as per direction of the Engineer-in-charge.USoR I&WD Item No. 3.31 Chapter -3 Page No. C-33 BI01010001010000000000000515BI0100001148
27 26.1 (i)Double bulb rubber seal (Bottom seal) 150 mm X 44 mm BI01010001010000000000000515BI0100001149 0.9 M
28 26.2 Supplying/Replacing Gear rod by a new Mild Steel Gear rod, threaded length as required and fitting, fixing in position with screw gearing arrangement for operating the draw shutter as per direction of the Engineer-in-charge.(The old materials to be returned to departmental godown.)(a) 50 mm. dia . BI01010001010000000000000515BI0100001150 1.8 M
29 26.3 Supplying/Replacing Gear rod by a new Mild Steel Gear rod, threaded length as required and fitting, fixing in position with screw gearing arrangement for operating the draw shutter as per direction of the Engineer-in-charge.(The old materials to be returned to departmental godown.)(a) 50 mm. dia . BI01010001010000000000000515BI0100001151 0.9 M
30 27 Direction and Place Identification Signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). PWD (WB), Schedule of Rates : 2018 Volume III: Road & Bridge Works CHAPTER - 8 TRAFFIC SIGNS, MARKINGS AND OTHER ROAD APPURTENANCES,Page No 270, Item no 8.06 BI01010001010000000000000515BI0100001152 2 SQM
31 28 Excavation in ordinary soil / mixed soil i.e. clay mixed with moorun , kankar, pebbles / silt dry or moist / slushy silt / sticky soil for WDS / WHS / RESERVOIR / SFMIS etc with hydraulic excavator of required bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirement of lines, grades and cross section and transporting to embankment / disposal site within all lifts and lead upto 1500 m including spreading , leveliing disposed spoils at disposed area. ( mode of measurement : pre work and post work) Ref:- Ref:- W.R.I.DD Revised S.O.R on dated 09.11.2020 Page-73 10.00 Earth work in excavation for WDS / WHS / RESERVOIR / SFMIS etc. Item no-1 BI01010001010000000000000515BI0100001153 10816 CUM
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail