}

Construction Of Toilet Blocks , Workers Room , Store Room , Office Room , Multipurpose Room , Security Room And Providing Galvanized Iron Sheet Barricading Fence For Proposed C And D Collection Point At Bharathi Salai In Dn 155 , Unit 34 , Zone 11, ZONAL OFFICE 11-Tamil Nadu

Corporation Of Chennai-COC has published Construction Of Toilet Blocks , Workers Room , Store Room , Office Room , Multipurpose Room , Security Room And Providing Galvanized Iron Sheet Barricading Fence For Proposed C And D Collection Point At Bharathi Salai In Dn 155 , Unit 34 , Zone 11. Submission Date for this Tender is 02-03-2021. Barricades Tenders in ZONAL OFFICE 11 Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

27111744
Construction Of Toilet Blocks , Workers Room , Store Room , Office Room , Multipurpose Room , Security Room And Providing Galvanized Iron Sheet Barricading Fence For Proposed C And D Collection Point At Bharathi Salai In Dn 155 , Unit 34 , Zone 11
Open Tender
Indian
Tamil Nadu
ZONAL OFFICE 11
02-03-2021

Tender Details

Construction Of Toilet Blocks , Workers Room , Store Room , Office Room , Multipurpose Room , Security Room And Providing Galvanized Iron Sheet Barricading Fence For Proposed C And D Collection Point At Bharathi Salai In Dn 155 , Unit 34 , Zone 11

Key Value

Document Fees
Refer document
EMD
INR 36900.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Construction of Toilet Blocks, Workers Room, Store Room, Office Room, Multipurpose Room, Security Room and Providing Galvanized Iron sheet Barricading fence for Proposed C&D Collection Point at Bharathi Salai in Dn 155, Unit 34, Zone 11
Sl. No. Item Description Item Code / Make Quantity Units
1 1.01 Providing R.C.C.30cm dia under reamed piles of 511.5cm length500cm depth below G.L. and 11.5cm above G.L. cast in situ withsingle reamed (bulb) in cement concrete 1:1.5:3 (1 cement 1.5river sand and 3 broken stone jelly 12 to 20mm gauge) includingboring erecting vibrating curing hire charges for drillingmaterials etc. complete as per relevent ISI specifications(excluding cost steel reinforcement).. 26 NOS
2 1.02 Earth work excavation for foundation in all kinds of soils invarying depths including dismantling any masonry or roots met with in foundation shoriEarth work excavation for foundation in all kinds of soils invarying depths including dismantling any masonry or roots met with in foundation shoring with planks and bailing water if necessary, clearing levelling the site with initial lead and including refilling the sides with excavated earth etc. complete 46 CUM
3 1.03 Supplying river sand and quarry rubbish/ stone dust and filling in regular layers of 15cm thick each including watering consolidating etc. complete for foundation basement etc.. 8 CUM
4 1.04 Plain Cement concrete work 1:4:8 (1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 8 blue granite broken stone jelly 40mm gauge) including consolidation curing, etc. complete for foundation, etc. upto basement 4 CUM
5 1.05 Supplying mild steel rods upto 16mm dia including cutting bending hooks cranking fabricating assembling and laying in exact position tieing with soft steel wire 16 or 18BWG etc. complete for all RCC works 2650 KGS
6 1.06 Supplying and erecting centering for sides and soffits including supports and strutting upto 3m high for plane surface such as RCCslab rectangular beams TEESupplying and erecting centering for sides and soffits including supports and strutting upto 3m high for plane surface such as RCCslab rectangular beams TEE or L beams lintels bedblocks staircase waists and landing slabs landing beams canopy etc. with all cross bracings using mild steel sheets of a size 90x60cm and 10 gauge stiffended with welded mild steel angles of size 25x25x3mm for boarding laid over silver Oak(Country wood) joists of size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cm centre to centre etc. complete. 217 SQM
7 1.07 Supplying and erecting shuttering including necessary supports for plane surface in foundation and basement for RCC column footings pintol blocks plinth beam staircase steps critical steps critical piers etc. using mild steel sheets of size 90x60cm and 10 gauge stiffened with welded mild steel angles of size25x25x3mm for boarding laid over silver Oak (country wood) joistsof size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cmcentre to centre etc. complete.. 8 SQM
8 1.08 Providing and laying in position ,Standardised Concrete Mix M20 Grade in accordance with IS :456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and m,aximum water cement ration of 0.55, including admixture (Plasticiser/Superplasticier) in recommended proportions as per IS:9103 to accelerate ,retard setting of concrete,improve workability without impairing strength and durability with about (5.0 cum) 7730 kg of 20 mm machine crushed stone jelly and with about (3.3 cum) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670 kg of sand, nut excluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying,vibrating with mechanical vibrators,finishing,curing,etc and providing complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standrands.(No separate payment will be made by the Department for the excess usage of materials) 13.5 CUM
9 1.09 Brick work in second class bricks (9"x4 3/8" x 2 3/4") in C.M.1:4 ( 1 cement and 4 Crushed Stone Sand (Commercially called M-Sand)) including curing,etc.,complete for 23cm thick walls upto basement (upto 1m high above G.L.). 43 CUM
10 1.1 Plastering with cement mortar 1:4 (1 cement and 4 psand)12mm thick including curing, etc., complete. 475 SQM
11 1.11 White washing two coats over new plastered surface.. 475 SQM
12 1.12 Colour washing one coat over new plastered surface.. 475 SQM
13 1.13 Supplying and fixing fully polished cuddapah slab for the cup board etc. including cutting to required size necessary cement mortar for fixing etc. complete.. 11 SQM
14 1.14 Supplying and fixing of M.S.Grills forWindows/Verandah/Ventilator s Grill of standard rectangular designusing 25mmx10mm M.S.Flats for outer frame and 20mmx5mm M.S.Flatsfor inner frame and for inner grill portion.The Vertical grillspacing should be 9.6cm. The centre portion spacing in between twogrills should be 14.5cm. 10 Nos of hold fasts of size 25mmx10mm forfixing the grill for Verandah and 8 Nos of hold fasts of size25mmx10mm for fixing the grill for Windows in the wall includingone coat of primer etc.complete. (As per sketch enclosed) andalso as directed during execution.. 15 SQM
15 1.15 Making and fixing M.S.Sheet gate of required size with twoshutters using necessary M.S.Flats 25x6mm M.S.Angles 50x50x6mmand M.S.Sheet 5mm thick (7gauge) providing gun metal caps 75mmsize pintols latches 25cm size for locking arrangements nameboards (C.M.) including cutting iron members welding fixing gatein position etc. complete as directed during execution.(Thedesign of gate furnished is subject to alteration duringexecution.) (ISI STD). 31 SQM
16 1.16 Providing and fixing fully glazed anodized aluminium sliding window of approved make and the glass shallbe 4mm thick without undulations and waves. The glass panes shall be fixed by snap on beeding including U shaped kasket. The window shall be fixed in position with necessary fittings such as aluminium handle etc complete as directed during execution. 15 SQM
17 1.17 Painting new iron work two coats with ready mixed paint with relevent ISI STD of superior quality and approved colour.. 53 SQM
18 1.18 Supplying and fixing white glazed earthern ware wash basin of size 55x40cm of approved make with a pair of G.I.brackets 15mm diaC.P.Pillar tap 32mm C.P.waste fittings with rubber plugs andC.P.chain 32mm 75cm long P.V.C.waste pipe with necessary union solder joint 90cm long with 15mm lead and brass connections with brass nuts and 15mm dia G.M.wheel valve and giving necessary connection etc. complete including cost of white lead teakwood plug screws rubber washers including painting two coats of approved make and colour paint over etc. complete. (wash basin should be got approved by the Buildings Engineer before use onworks). 2 NOS
19 1.19 Supply and fixing of surface mount patty type 1 x 36 watt T.L fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. 8 MOS
20 1.2 Supply and fixing of WT bulk head fitting with guard (Reputed make) suitable for 11W CFL lamp with CFL 7 NOS
21 1.21 Supply & Fixing of 48" sweep size CEILING FAN of 5 Star Rated with double ball bearing , down rod, canopy complete set (with out speed regulator) ( ON EXISTING CLAMP WITH 300 MM DOWN PIPE ) 5 NOS
22 1.22 Supplying and fixing 15x10cm stoneware gully with Por S trapwith 15x15cm C.I.grating and 10cm dia S.W.bend including 40mm size brick jelly concrete in C.M.1:4:10 ( 1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 10 broken brick jelly 40mm gauge),10cm thick alround the gully, 11cm thick wall with stock brick work in C.M.1:4 ( 1cement and 4 Crushed Stone Sand (Commercially called M-Sand)) upto ground level and plastering with C.M.1:3 (1 cement and 3 Crushed Stone Sand (Commercially called MSand)),12mm thick for gully silt pit of size 15x15cm etc.,complete. 4 NOS
23 1.23 Supplying and fixing 51cm colour glazed water closet pan with p or s trap including foot rests (colour glazed) and supplying laying 100mm dia S.W.P. concrete encasing the W.c. appurtenance etc. complete 2 NOS
24 1.24 Providing and fixing white glazed Eruopen water closet with rose wood seatings (black) low level flushing tank with all internal fittings including jointing the trap with soil pipe witProviding and fixing white glazed Eruopen water closet with rose wood seatings (black) low level flushing tank with all internal fittings including jointing the trap with soil pipe with cement making holes in the walls screws etc. complete as directed during execution.(ISI STD) 1 NOS
25 1.25 Providing and fixing in position superior quality and approved make white glazed flat back tipped urinal of size46.5x35.5x26.5cm with necessary specials such as P.V.C.waste pipe32mm dia with bell mouth opening and 75cm long lead and brass connection 15mm dia wheel valve etc. including fixing with necessary teakwood wall plugs screws etc. and making good the walls etc. complete as directed during execution. 4 NOS
26 1.26 Supplying and fixing P.V.C. screw down tap of size 20mm dia. 5 NOS
27 1.27 Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box inflush with wall with 5A F.T. switch, covered with hylum sheet of 3mm thick with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (For electronic Regulator) 13 POINT
28 1.28 Roofing with galvanised corrugated iron sheets (thickness of sheet 0.8mm) including J bolts and nuts with bitumen washers etc. complete (ISI STD).. 491 SQM
29 1.29 Paving the flooring with special type of flooring (tiles coloured cement based hydraulic pressed Antiskid tiles) 20mm thick in cm 1:3 including pointing with colour cement etc. complete.(ISI). 456 SQM
30 1.3 Supplying and paving second quality white glazed tiles 30x20cm x .6 mm with relevent ISI STD size of superior quality and of approved make set in C.M. 1:3 (1 cement and 3 river sand) 20mm thick and pointing with same colour cement polishing clearing etc. complete.". 81 SQM
31 1.31 Carting away the surplus earth and debris to a lead of 11km.and dumping in the Corporation Land as directed during the execution. 40 CUM
32 1.32 Providing and laying in position ,Standardised Concrete Mix M30 Grade in accordance with IS :456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/m3 and m,aximum water cement ration of 0.45, including admixture (Plasticiser/Superplasticier) in recommended proportions as per IS:9103 to accelerate ,retard setting of concrete,improve workability without impairing strength and durability with about (5.0 cum) 7730 kg of 20 mm machine crushed stone jelly and with about (3.3 cum) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670 kg of sand, nut excluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying,vibrating with mechanical vibrators,finishing,curing,etc and providing complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standrands.(No separate payment will be made by the Department for the excess usage of materials) 9 CUM
33 1.33 Manufacturing and placing well rings 1.22m internal dia and 40mm thick in RCC 1:2:4 ( 1 cement,2 Crushed Stone Sand (Commercially called M-Sand) and 4 stone jelly 12 to 20mm gauge) including necessary reinforcement, rendering smooth with cement the inner and outer surface of the ring, etc.,complete as directed during execution. 6 MTR
34 1.34 Extra Labour for RCC precase works including moulding with necessary centering materials plastering the exposed surface withC.M.1:3 (1 cement and 3 Crushed Stone Sand (Commercially called M-Sand)) 10mm thick and rendering smooth with cement at 1.5kg per 1sq.m.curing for 7 days fixing inposition,etc.,complete as directed furing execution. 1.5 CUM
35 1.35 Supplying and erecting in position LIGHT DUTY STEEL TRUSSES as per the drawing. The materials and design of the trusses should confirm to the relevant Indian Standard specification. The trusses shall be procured only from reputed manufactures of trusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design. The rate quoted shall include the cost of trusses. Base-plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of redoxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc., The roof sheeting shall project 0.762m from the eves purlins. For structures like CYCLE STAND, PARKING GARAGE, TEMPORARY ENCLOSERS 2510 KGS
36 1.36 Supplying and fixing 50mm dia G.I.Pipe including cutting threading and jointing with necessary specials fixing to wall with clamps and screws including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc. complete. 198 MTR
37 1.37 Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 110 CUM
38 1.38 Laying C.C 1:4:8 Using 40 M.m. Irc Size B.G. Metal Including Curing Ramming Etc. Complete 83 CUM
39 1.39 Solid panel PVC door with frame Solid PVC door shutters using 19 gauge 19mm MS sq..tubes for styles and outer frames. 15mm MS sq.tubes for top lock and bottom rails. The steel tubes shall be covered with 5 mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheet for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mmx30mm. The over all size of top rail lock rail and bottom rail shall be 75mm x 30 mm. The over all size of frames shall be 50mmx45mm with suitable rabate for housing the shutter.including labour charges etc. complete.as per ISI standard. 7 SQM
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail