Military Engineer Services-MES has published Repair / Maint And Overhauling Of Lt Servo Type Voltage Stabilizers , Lt Air Circuit Breakers Ups And Allied Works At Different Otm Accn / Technical Building In Army Area Jodhpur Under Ge ( Army ) Utility Jodhpur. Submission Date for this Tender is 12-03-2021. Air Circuit Breaker Tenders in GARRISON ENGINEER ARMY UTILITY MULTAN LINE JODHPUR Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Mar-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-03-2021 |
| Name of Work: Repair / Maint and overhauling of LT Servo Type Voltage Stabilizers, LT Air Circuit Breakers UPS and allied works at different OTM Accn / Technical Building in Army Area Jodhpur under GE (Army) Utility Jodhpur | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | M&L for disconnecting electric connection from incoming and out going of servo voltage stabilizer 3 phase balanced/ unbalanced load type, opening and dismantling the complete unit of Servo Controlled voltage stabilizer of capacity 250 KVA to 300 KVA 3 phase 50 C/S AC supply of any make complete including taking out insulation oil and keep aside Fault detection, repairing and rectification of defects servicing all moveable and static parts and accessories including repairing/replacing all defective parts such as old sleeves, bolts, nuts washers/wires, hooks etc including tightening of all loose connections and repair to all other minor accessories as required at site Re-assembling / commissioning/ testing the servo conrolled stabilizer unit complete after required repairs and fixing the various parts assembly in housing/tank, making complete internal electric/mechanical connections, replacement of unserviceable metering instruments, selector switches etc all as specified and as directed including painting the stabilizer by scrapping the old paint and preparing old surface and applying two coats of synthetic enameled existing colour paint externally over a coat of red oxide primer paint and writing SM/MES Nos and capacity of stabilizer and connecting including cutting existing cable preparation of cable ends, providing aluminium/copper cable lugs of suitable size and all as directed by Engr-in-Charge .Note: Spare parts will be measured and paid separately under relevant "supply and fixing" items. | 2 | Each job | |
| 2 | 2 | Supply and fixing of spare parts for 250 KVA/300 KVA servo controlled stabilizer for repair/overhauling under Sl item No.1 above.\n(a) Servo motor single phase, 50 Hz, 240 volts, 10 kg torque, 60 RPM. | 6 | Each | |
| 3 | 2.01 | (b) Carbon brush with holder complete | 12 | Each | |
| 4 | 2.02 | (c) Electronic sensing card (PCB) | 6 | Each | |
| 5 | 2.03 | (d) RC Net work set | 6 | Each | |
| 6 | 2.04 | (e) PCB connector | 6 | Each | |
| 7 | 2.05 | (f) Variac Gear | 4 | Each | |
| 8 | 2.06 | (g) Carbon brush fingers | 12 | Each | |
| 9 | 2.07 | (h) Variac Control CT | 6 | Each | |
| 10 | 2.08 | (j) Main Bushing with brass rod (insulator & rod) | 4 | Each | |
| 11 | 2.09 | (k) High low cut off relay | 4 | Each | |
| 12 | 2.1 | (l) Electronic sensing transformer | 2 | Each | |
| 13 | 2.11 | (m) Wiring Set complete | 2 | Each | |
| 14 | 2.12 | (n) Motor Gear | 6 | Each | |
| 15 | 2.13 | (o) Variac(dimmerstat) assy copper wound (continuously variable voltage auto transformer) for 250 KVA/300 KVA servo voltage stabilizer oil cooled, input voltage 300 to 440 volts out put 415 volts + 1% as per existing r all as directed by engineer in charge | 1 | Each | |
| 16 | 3 | All as per Sl item No 2 but of capacity 100 to 150 KVA 3 phase 50 C/S AC supply of any make complete all as directed by Engr-in-Charge. | 3 | Each Job | |
| 17 | 4 | Supply and fixing spare parts for 100 to 150 KVA servo controlled stabilizer for repair/overhauling under Sl item No3 above.\n(a) Servo motor single phase, 50 Hz, 240 volts, 10 kg torque, 60 RPM | 9 | Each | |
| 18 | 4.01 | (b) Variac(dimmerstat) assy copper wound (continuously variable voltage auto transformer) for 100/150 KVA servo voltage stabilizer oil cooled input voltage 300 to 440 volts out put 415 volts + 1% as per existing all as directed by engineer in charge | 1 | Each | |
| 19 | 4.02 | (c) Carbon brush with holder complete | 9 | Each | |
| 20 | 4.03 | (d) Electronic sensing card (PCB) | 3 | Each | |
| 21 | 4.04 | (e) RC Net work set | 3 | Each | |
| 22 | 4.05 | (f) PCB connector | 6 | Each | |
| 23 | 4.06 | (g) Variac Gear | 9 | Each | |
| 24 | 4.07 | (h) Carbon brush fingers | 9 | Each | |
| 25 | 4.08 | (j) Variac Control CT | 6 | Each | |
| 26 | 4.09 | (k) Main Bushing with brass rod (insulator & rod) | 12 | Each | |
| 27 | 4.1 | (l) High low cut off relay | 3 | Each | |
| 28 | 4.11 | (m) Electronic sensing transformer | 3 | Each | |
| 29 | 4.12 | (n) Wiring Set complete | 3 | Each | |
| 30 | 4.13 | (o) Motor Gear | 6 | Each | |
| 31 | 5 | S&F Aluminium lugs of size 16 Sqmm | 24 | Each | |
| 32 | 6 | S&F Aluminium lugs of size 25 Sqmm | 24 | Each | |
| 33 | 7 | S&F Aluminium lugs of size 35 Sqmm | 24 | Each | |
| 34 | 8 | S&F Aluminium lugs of size 50 Sqmm | 24 | Each | |
| 35 | 9 | S&F Aluminium lugs of size 70 Sqmm | 16 | Each | |
| 36 | 10 | S&F Aluminium lugs of size 95 Sqmm | 16 | Each | |
| 37 | 11 | S&F Aluminium lugs of size 120 Sqmm | 16 | Each | |
| 38 | 12 | S&F Aluminium lugs of size 150 Sqmm | 16 | Each | |
| 39 | 13 | S&F Aluminium lugs of size 185 Sqmm | 16 | Each | |
| 40 | 14 | S&F Aluminium Lugs of size 240 Sqmm | 16 | Each | |
| 41 | 15 | S&F Push switch for manual voltage regulation | 5 | Each | |
| 42 | 16 | S&F Volt meter 0 to 500 Volts (Digital Type 96x96 mm flush monitoring) | 4 | Each | |
| 43 | 17 | S&F Amp meter 0- 200 Amps (Digital Type 96x96 mm flush monitoring) | 4 | Each | |
| 44 | 18 | S&F Volt meter 0 to 300 Volts for measuring single phase voltage (Analogue Type 60x60 mm flush monitoring) | 6 | Each | |
| 45 | 19 | S&F Voltage Selector switch | 6 | Each | |
| 46 | 20 | S&F Amp Selector switch | 6 | Each | |
| 47 | 21 | S&F Limit switch | 5 | Each | |
| 48 | 22 | S&F CT of ratio 400/5 | 9 | Each | |
| 49 | 23 | S&F CT of ratio 200/5 | 9 | Each | |
| 50 | 24 | S&F Toggle swith for Auto manual operation | 10 | Each | |
| 51 | 25 | M & L for repair/ Servicing to Online UPS of rating 25 KVA Capacity suitable for 415 Volts, AC, 50 Hz, three phase complete of any make/type all as specified and directed including cleaning and segregation of serviceable and unserviceable components. | 1 | Each Job | |
| 52 | 26 | M&L for in replacement of Electronic sensing card (PCB) for Online UPS 25 KVA, 415 Volts, AC, 50 Hz, three phase complete as specified and directed | 1 | Each Job | |
| 53 | 27 | M & L for repair/ Servicing to Online UPS 15 KVA Capacity suitable for 415 Volts, AC, 50 Hz,Single phase complete as specified and directed | 1 | Each Job | |
| 54 | 28 | M&L for in replacement of Electronic sensing card (PCB) for Online UPS 15 KVA, 415 Volts, AC, 50 Hz, Single phase complete as specified and directed | 1 | Each Job | |
| 55 | 29 | M & L for repair to battery bank by replacement of lead acid batteries dry type each of 12 Volts, 75 AH complete connected in series suitable for 25 KVA on line UPS with battery input voltage 360V DC. Type: Powersafe plus, EP-75-12 Make: Exide or equivalent | 30 | Each | |
| 56 | 30 | M & L for repair to battery bank by replacement of lead acid batteries each of 12 Volts, 18 AH complete connected in series suitable for 15 KVA on line UPS with battery input voltage 360V DC Type: Powersafe plus, EP-18-12 Make: Exide or equivalent | 30 | Each | |
| 57 | 31 | M&L for carrying out filtration of insulation oil to bring the dielectric strength of oil upto 50 KV and removing of sludge and filling in the voltage stabilizer taken all as specified and directed by Engr-in-Charge. | 1200 | Ltrs | |
| 58 | 32 | Supply and filling of insulation oil confirming to IS-335 having dielectric strength 55-60KV for topping up voltage stabilizer all as specified and directed by Engr-in-Charge. | 418 | Ltrs | |
| 59 | 33 | Taking out LT 3 phase 1000 amp rating Air Circuit Breaker from LT panel board by disconnecting incoming and out going cables for necessary repair.Dismantling of complete ACB, segregation of serviceable and unserviceable components, carrying out cleaning of all parts using CRC, air blower, carrying out minor repair to serviceable components and replacement of following unseviceable spares and assembling, testing and re installation and connection in LT panle board all as specified and directed by Engr-in-Charge.\n(a) S & F Jaw Contact\n(b) S & F Cradle Terminal\n(c) S & F Cradle Base\n(d) S & F Safety Shutter\n(e) S & F Maintenance Kit | 1 | Each Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
