Military Engineer Services-MES has published Provisioning Of Toilets At Watch Towers No . 1 , 2 , 4 , 8 , 13 , 18 Under Lbw , Provision Of Jafriwall At Certain Government Married Accn ( Ae , Af , Ag Blocks ) In Phas-Ii At Naval Station Bheemunipatnam And Provision Of Solar Lights At Adm. Submission Date for this Tender is 16-03-2021. Solar Light Tenders in Garrison Engineer P Navy Kalinga Visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Mar-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-03-2021 |
| Name of Work : SPROVISIONING OF TOILETS AT WATCH TOWERS NO. 1, 2, 4, 8, 13 & 18 UNDER LBW, PROVISION OF JAFRIWALL AT CERTAIN GOVERNMENT MARRIED ACCN (AE, AF & AG BLOCKS) IN PHAS-II AT NAVAL STATION BHEEMUNIPATNAM AND PROVISION OF SOLAR LIGHTS AT ADMIN BLOCK, SECURITY GATES AND KEY LOCATIONS AT NAD BHEEMUNIPATNAM | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in trenches n. exc.1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 Sq.m. on plan and n. exc. 1.5m in depth and getting out in hard and dense soil complete all as specified and as directed by the Engineer-in-Charge. | 239 | Cum | |
| 2 | 2 | Excavation in trenches n. exc.1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, cables etc. n. exc. 10 Sq.m. on plan and n. exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed by the Engineer-in-Charge. | 137 | Cum | |
| 3 | 3 | All as per item No.1 above but depth exc. 1.5m and n.exc 3m all as specified and as directed please. | 27.5 | Cum | |
| 4 | 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed by the Engineer-in-Charge. | 310.5 | Cu.m. | |
| 5 | 5 | Removing excavated soil to a distance exc. 250m but n.exc.500m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge. | 143 | Cu.m. | |
| 6 | 6 | Earth filling under floor spreading and levelling in layers n.exc 25cm thick including well ramming including watering as required complete all as specified and as directed. | 6 | Cu.m. | |
| 7 | 7 | M&L for hardcore of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed by the Engineer-in-Charge. | 7.5 | Cum | |
| 8 | 8 | M&L for PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge. | 43 | Cum | |
| 9 | 9 | M&L for 75mm thick PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in sub base for flooring/ plinth protection complete all as specified and as directed by the Engineer- in-Charge. | 72 | Sq.m. | |
| 10 | 10 | M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels/drain making good the road/path, complete all as specified. | 0.5 | Cum | |
| 11 | 11 | M & L providing cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as cast in situ in lintels upto 1.5m span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. | 6 | Cum | |
| 12 | 12 | M&L for precast RCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in drain covers, manholes cover etc. set in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge. | 5 | Cum | |
| 13 | 13 | M&L for Reinforced Cement Concrete, 1:1.5:3, type A1 (Using 20mm graded granite stone aggregate) in foundations, including rafts, footings, plinth beams etc and the like complete all as specified and directed. | 82 | Cu.m. | |
| 14 | 14 | M&L for Reinforced Cement Concrete,1:1.5:3,type A1 (Using 20mm graded granite stone aggregate) in columns, pillars, piers, posts and struts etc and the like complete all as specified and directed. | 29 | Cu.m. | |
| 15 | 15 | M&L for Reinforced Cement Concrete, 1:1.5:3, type A1 (Using 20mm graded granite stone aggregate) in lintel beams, cantilever, roof beams and the like complete all as specified and directed. | 16 | Cu.m. | |
| 16 | 16 | M&L for Reinforced Cement Concrete, 1:1.5:3, type A1 (Using 20mm graded granite stone aggregate) in slabs supported on walls and the like complete all as specified and directed. | 7 | Cu.m. | |
| 17 | 17 | M&L for precast cement concrete louvers and jallies, 40mm thick in PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) (measured solid), including all mouldings but excluding frame, in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge. | 150 | Sq.m. | |
| 18 | 18 | M&L for brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge. | 47 | Cum | |
| 19 | 19 | M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge. | 150 | Sqm | |
| 20 | 20 | M&L for non skid/matt finish ceramic tiles 7mm to 8mm thick of size 500 mm x 500 mm in floors etc set and jointed in neat slurry and pointed in white or coloured cement to match for joint free over screed bed or bedding layer 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed by the Engineer-in-Charge. | 24 | Sqm | |
| 21 | 21 | S&F glazed ceramic tiles in vertical surface 250 x 450 or 300 x 450 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match joint free over rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge. | 72 | Sq.m. | |
| 22 | 22 | Use and waste of form work to sides of foundation/footings, plinth beams and similar work for rough finished surfaces complete all as specified and directed. | 128.5 | Sq.m. | |
| 23 | 23 | Use and waste of form work to sides of columns and pillars for fair finished surfaces complete all as specified and directed. | 240.5 | Sq.m. | |
| 24 | 24 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces complete all as specified and as directed by the Engineer-in-Charge. | 87 | Sqm | |
| 25 | 25 | Use and waste of form work to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work, not exceeding 200mm thick for fair finished surfaces complete all as specified and directed. | 44.5 | Sqm | |
| 26 | 26 | M & L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. | 4640 | Kg | |
| 27 | 27 | M & L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. | 1400 | Kg | |
| 28 | 28 | M&L for anodised powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified and as directed by the Engineer-in-Charge. | 18 | Kg | |
| 29 | 29 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet (Used instead of plain colour PVC sheet) and edges painted to match with the printed sheet, reinforced with mild steel square tube in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge. | 30 | Rm | |
| 30 | 30 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame covered with heat moulded wood grain printed PVC sheet (used instead of Plain colour PVC sheet) with 5mm thickx15mm wide PVC sheet beading used inside stiles & rails and decorative PVC beading of 10mmx10mm (90O) used instead of exposed portion of PVC sheet beading, panelling of wood grain printed PVC sheet to fit in the mild frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge. | 8.5 | Sq.m. | |
| 31 | 31 | S & F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm each pane complete all as specified and as directed | 2.5 | Sq.m. | |
| 32 | 32 | S&F 100mm size butt hinges, medium weight, cold rolled stainless steel complete all as specified and as directed by the Engineer-in-Charge. | 24 | Each | |
| 33 | 33 | S&F 150mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge. | 12 | Each | |
| 34 | 34 | S&F 150mm long extruded aluminium alloy handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge. | 12 | Each | |
| 35 | 35 | S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by the Engineer-in-Charge. | 6 | Each | |
| 36 | 36 | S&F tubular towel rail 20mm dia, D type 600mm long between flanges of brass chromium plated fixed with and including CP brass screws complete all as specified and as directed. \n | 6 | Each | |
| 37 | 37 | M&L for rendering 10mm thick with CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. | 171 | Sq.m. | |
| 38 | 38 | M&L for rendering 10mm thick with CM 1:4 on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and as directed by the Engineer-in-Charge. | 600 | Sq.m. | |
| 39 | 39 | M&L 15 mm thick rendering on fair faces of brick/concrete surfaces in cement mortar 1:4 in two layers of 10mm thick and 5mm thick, finished fair and even and water proofing compound shall be added on top layer as per manufacturer instruction complete all as specified. (Note :- WPC will be measured and paid separately under appropriate item as supply only). | 168 | Sq.m. | |
| 40 | 40 | Supply only Integral Water Proofing Compound (ISI marked) of approved make. | 31 | Kg | |
| 41 | 41 | M&L 5mm thick plaster in CM 1:3 on concrete surfaces of ceilings complete all as specified and as directed by the Engineer-in-Charge. | 33 | Sqm | |
| 42 | 42 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over one coat of primer complete all as specified and as directed by the Engineer-in-Charge. | 168 | Sqm | |
| 43 | 43 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. | 42 | Sqm | |
| 44 | 44 | M&L for preparation of new plastered surfaces of walls and applying two coats of weather proof exterior emulsion over one coat of primer complete all as specified and as directed by the Engineer-in-Charge. | 600 | Sqm | |
| 45 | 45 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by the Engineer-in-Charge. | 33 | Sqm | |
| 46 | 46 | M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed by the Engineer-in-Charge. | 102 | Sqm | |
| 47 | 47 | S&F grating doom 125mm dia. with waste hole of PTMT (Min weight 40 gms) complete all as specified and as directed by the Engineer-in-Charge. | 12 | Each | |
| 48 | 48 | S&F in repair vitreous china squatting pan Orissa Pattern of size 580x440mm white with integral foot rest 1st quality with 100 mm dia 'P' or 'S' trap, ISI marked including provision of lime concrete bedding excluding flush pipe complete all as specified. | 6 | Each | |
| 49 | 49 | S&F 10 ltr capacity, PVC low level flushing cistern, syphonic action type white body with inlet ball valve, float , handle, bracket, flush pipe etc complete & connecting to WC complete all as specified.\n | 6 | Each | |
| 50 | 50 | S&F in repairs vitreous china urinals, half stall type, white (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement , including fixing urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and as directed. | 6 | Each | |
| 51 | 51 | S&F 125mm dia. chromium plated brass shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by the Engineer-in-Charge. | 6 | Each | |
| 52 | 52 | S & F in repair 15mm dia stop cock cast copper alloy fancy type chromium plated with long shank, concealed type conforming to IS-8931 screwed down high pressure screwed both ends for iron or for brass ferrule complete all as specified and as directed.\n | 6 | Each | |
| 53 | 53 | S&F PVC flexible connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by the Engineer-in-Charge. | 6 | Each | |
| 54 | 54 | S&F 15mm dia chromium plated angle stop valves, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engineer-in-Charge. | 6 | Each | |
| 55 | 55 | S&F two way bib cock 15mm dia. chromium plated, fancy type complete all as specified and as directed by the Engineer-in-Charge. \n(Jaquar Catalogue No. FON-40041 or equivalent as approved by GE) | 6 | Each | |
| 56 | 56 | S&F 25mm bore PP-R ball valves(brass insert) high pressure of PTMT (Minimum weight 142 gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed including GI fitting complete all as directed. | 6 | Each | |
| 57 | 57 | S&F 25mm dia. PP-R globe or gate valve with steel ball, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge. | 6 | Each | |
| 58 | 58 | S&F three layer PP-R (Polypropylene random copolymer) pipes of dia 25 mm bore pipes SDR 7.4 & SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.\n | 12 | RM | |
| 59 | 59 | All as per Srl item No. 58 here-in-above but for 20 mm dia | 24 | RM | |
| 60 | 60 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by the Engineer-in-Charge. | 6 | Each | |
| 61 | 61 | S&F PVC (SWR) pipes 40mm dia. single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge. | 12 | Rm | |
| 62 | 62 | S&F PVC (SWR) pipes 110mm dia. single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge. | 21 | Rm | |
| 63 | 63 | S&F PVC (SWR) pipes 75mm dia. single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge. | 36 | Rm | |
| 64 | 64 | S&F 110mm dia. PVC (SWR) plain bends any radius complete all as specified and directed by the Engineer-in-Charge. | 6 | Each | |
| 65 | 65 | S&F 75mm dia. PVC (SWR) plain bends any radius with access door complete all as specified and directed by the Engineer-in-Charge. | 6 | Each | |
| 66 | 66 | S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed by the Engineer-in-Charge. | 6 | Each | |
| 67 | 67 | S&F PVC (SWR) multi floor trap 75mm dia. outlet with grating including jointing with solvent cement complete all as specified and directed by the Engineer-in-Charge. | 12 | Each | |
| 68 | 68 | S & F 40 mm dia bore steel tubing ISI marked medium grade galvanised with all fittings laid in trenches complete all as specified and as directed. | 140 | RM | |
| 69 | 69 | S & F 25 mm dia bore steel tubing ISI marked medium grade galvanised with all fittings laid in trenches complete all as specified and as directed. | 145 | RM | |
| 70 | 70 | S & F 20 mm dia bore steel tubing ISI marked medium grade galvanised with all fittings laid in trenches complete all as specified and as directed. | 120 | RM | |
| 71 | 71 | S & F 15 mm dia bore steel tubing ISI marked medium grade galvanised with all fittings laid in trenches complete all as specified and as directed. | 20 | RM | |
| 72 | 72 | S&F 25mm dia chromium plated stop valves, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engineer-in-Charge. | 6 | Each | |
| 73 | 73 | S&F gun metal gate valves of size 25 mm bore with iron wheel head, screwed both ends for iron pipe, ISI marked, as per IS : 778 complete all as specified and as directed. | 6 | Each | |
| 74 | 74 | S&F cast iron sluice valve 80mm dia conforming to IS: 14846-2000, flanged and drilled both ends, long body of class PN-1.6 with brass spindle, including joints materials i.e., nuts, bolts , washers, rubber insertion sheet etc and testing complete all as specified and as directed. | 1 | Each | |
| 75 | 75 | M&L for drilling and tapping cast iron water main (in position) for branch connections of internal dia 20 mm complete all as specified and as directed. | 6 | Each | |
| 76 | 76 | S & F rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top ) (conforming to IS 12701-1996) multi layer hoisted and fixed in position 750 ltrs capacity complete all as specified in SSR Part I . | 6 | Each | |
| 77 | 77 | M&L for valve pit chamber of internal size 600 x 600 x 600 mm with full brick wall in CM (1;4) over a foundation of 100 mm thick PCC (1:4:8) type B2 including MS sheet cover of 3mm thick including locking arrangement with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified | 6 | Each | |
| 78 | 78 | Material and labour for point wiring for one light point controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface all as specified and as directed. | 42 | Per Point | |
| 79 | 79 | All as per Srl Item No. 78 here-in-above but for One socket outlet point 3 pin 5 A on independent board. | 6 | Per Point | |
| 80 | 80 | All as per Srl Item No. 78 here-in-above but for One switch socket outlet point 5 A on same board with other switches | 6 | Per Point | |
| 81 | 81 | Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4.0 sqmm and one single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4.0 sqmm as in continuous earth wire drawn existing surface /recessed and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete with taking down old unserviceable submain wiring complete all as specified and as directed. | 50 | Rm | |
| 82 | 82 | Supply and fixing switch piano flush button single pole one way 5 amps all as specified and as directed | 42 | Each | |
| 83 | 83 | S&F switch socket outlet 5 pin 5 amp flush type with including switch all as specified and as directed. | 12 | Each | |
| 84 | 84 | Supply and fixing ceiling rose surface bakelite 65 x 30 mm three terminals all as specified and as directed. | 36 | Each | |
| 85 | 85 | Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , single pole and neutral (SPN) 240 Volt , double door, suitable for 4 way with din rail earth and neutral bar , all as specified and as directed. | 6 | Each | |
| 86 | 86 | Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position complete all as specified and as directed. | 12 | Each | |
| 87 | 87 | Supply and fixing in proper position MCB double pole of capacity up to 40 amps, 240 Volts C-series with 10kA breaking capacity, all as specified and as directed. | 6 | Each | |
| 88 | 88 | Supply only indoor decorative batten for wall/ceiling mounting box type Extruded aluminium housing ,PC Diffuser, energy efficient saving LED BATTEN LIGHT 20W,230 V,50 HZ, slim integrated design easy install including twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed. | 18 | Each | |
| 89 | 89 | Supply and fixing on wall security LED light luminaries fitting 1X25 W and including cable for connection from ceiling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1.5 m long bent to shape including bolt, nut,washer,clamp etc all as specified and as directed by the Engineer-in-charge. | 12 | Each | |
| 90 | 90 | S&F Exhaust fan wall mount type 300 mm sweep metal body Heavy duty , single phase with louver shutter and connecting up including provision of hold fasts for fixing fan and louver shutter with cutting of hole and necessary PCC(1:3:6) all as specified and as directed. | 6 | Each | |
| 91 | 91 | Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 16 Sqmm 2 core laid in trench /poles/on wall complete all as specified and as directed Make:Havells/KEI/Polycab. | 137 | Rm | |
| 92 | 92 | Removing excavated material to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge. | 34.5 | Cu.m. | |
| 93 | 93 | Material and labour for sand cushioning for protection of underground cable consolidated and compacted with clean dry sand all as specified and as directed (Compacted thickness shall only be measured and paid) | 11 | Cum | |
| 94 | 94 | Supply and lay bricks common burnt clay building bricks sub-class B of size 230x113x75 in cable trenches complete all as directed | 1130 | Each | |
| 95 | 95 | Supply and fixing lamp holder insulated body suitable for Retrofit lamp all as specified and as directed. \n | 6 | Each | |
| 96 | 96 | M&L for Earthing complete with 7.5m CI pipe 80 mm dia with flanged ends, centrifugally cast, class A, in any length, joints with suitable stainless steel nuts and bolts and sufficient slot up to 2.5mtrs length buried directly and preferably vertically in ground with top flanged ended 2.5mtrs below ground level welded/connected with GI strip 32×6mm size on the top edge of the flange to bottom edge of the flanged for earthing including filling the pit with charcoal common salt surrounding the earth pipe including drilling 400 mm dia bore in any strata of soil to lower the CI pipe including necessary earth work PCC (1:3:6) type C1 with 50mm thick precast RCC (1:2:4) type B1 cover slab complete all as specified and directed. | 6 | Each | |
| 97 | 97 | S&F hot dipped galvanized of average galvanization thickness of not less than 65 microns octagonal pole 5 m long complete with 4 nos x M20 x 700 mm foundation bolts with nuts & washers. The sheet thickness of the pole shall be 3 mm and the size of base plate shall be 225 x 225 x 12 mm, PCD 225MM. The bottom dia of the pole shall be 130 mm and top dia 70 mm. Material of construction of pole shall be BSEN 10025 or equivalent all as specified and directed.\n(Note : The unit rate of pole includes the necessary PCC work for fixing the pole including whole accessories required during the fixing with necessary pole painting as required all as specified and directed.)\n | 12 | Each | |
| 98 | 98 | Supply, install and commissioning of all in one 40 watt solar street light designed with efficiency mono crystalline solar PV module, lithium ferro phosphate battery with inbuilt BMS technology, high efficiency LED, MPPT solar charge controller & aluminium extruded body with intelligent control system which manage and maintains battery unit to provide longer life having IP 65 protection. The intelligent microwave sensor controls the dimming and brightness of light effectively extend the working time all as specified and directed. \n(Make Havells Cat Part No. ALFA 40W AIO MIC or equivalent as approved by GE)\n(Note : The contractor have to submit certificate of warranty of minimum 5 years for the solar lights) | 12 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
