Assam Industrial Infrastructure Development Copr-AIIDC has published Up Gradation Of Industrial Estate Dorikapar Sivasagar District Sivasagar ( Construction Of Rcc Administrative Office Building With Road Side Greenery Including Renovation Of Existing Oh Tank Provision For Dtw And Pipe Layout ) Group No Ii. Submission Date for this Tender is 18-02-2021. Building Work Tenders in IE Sivsagar Assam. Bidders can get complete Tender details and download the document.
| Name of Work: Up gradation of Industrial Estate, Dorikapar, Sivasagar, District Sivasagar(Construction of RCC Administrative Office building with road side greenery including renovation of existing OH tank, provision for DTW & pipe layout) Group No.2 | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (a) In ordinary soil | item1 | 16.88 | Cum |
| 2 | 2 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | item2 | 204.58 | Cum |
| 3 | 3 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royalty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city | item3 | 425.4 | Cum |
| 4 | 4 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume | item4 | 2.25 | Cum |
| 5 | 5 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering curing etc. complete. c) 100 mm thick | item5 | 237.54 | Sqm |
| 6 | 6 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | item6 | 45.03 | Sqm |
| 7 | 7 | Providing and laying plain/reinforced cement croncrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). (I) Using mixture machine. (A) In sub - structure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. (N) Without using admixture, plasticiser. (c) M20 grade concrete or Prop. 1:1.5:3 | item7 | 6.26 | Cum |
| 8 | 8 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumers, cantilever, staircase including preparing the top surface and finishing of nosing. b) M20 grade concrete or Prop. 1:1.5:3 | item8 | 66.71 | Cum |
| 9 | 9 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: 3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (a) Using 25 mm thick plank | item9 | 4.05 | Sqm |
| 10 | 10 | Sides of tie beams, grade beams etc. at or below ground level. (a) Using 25 mm plank | item10 | 12.03 | Sqm |
| 11 | 11 | Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face (ii) Using 25 mm thick plank | item11 | 174.24 | Sqm |
| 12 | 12 | (b) Circular or curved in plan (Using 38mm thick plank) | item12 | 11.78 | Sqm |
| 13 | 13 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (ii) Using 25mm thick plank | item13 | 170.8 | Sqm |
| 14 | 14 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantilever slabs, chajjas, balconies and the like. (ii) Using 25mm thick plank | item14 | 365.07 | Sqm |
| 15 | 15 | Vertical ties, fins, sun breaker, louvers, bands, drop walls etc. (ii) Using 25mm thick plank | item15 | 18.54 | Sqm |
| 16 | 16 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (ii)Using 25mm thick plank | item16 | 22.34 | Sqm |
| 17 | 17 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | item17 | 323.55 | Sqm |
| 18 | 18 | Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure up to plinth level including dewatering if necessary. (a) In proportion 1:3 | item18 | 23.01 | Cum |
| 19 | 19 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embedded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) (1 cement:4 sand) | item19 | 451.17 | Sqm |
| 20 | 20 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.\n(b) 20 mm thick\n | item20 | 49.92 | Sqm |
| 21 | 21 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls mean both interior and exterior walls). a) Normal range Somany/ Orient/Nitco/Asian Make\ni) Of size 200mmx300mm and above\n | item21 | 71.73 | Sqm |
| 22 | 22 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make\nii) Of size 600mmx600mm and above\n | item22 | 217.9 | Sqm |
| 23 | 23 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy cream, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate | item23 | 23.99 | Sqm |
| 24 | 24 | Providing polished SUNROCK-Hi CTS/ MULTIWYN tiles of approved quality, size, shape and thickness not less than 18mm on floors and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) ii) Old Castle (455x455) mm | item24 | 31.39 | Sqm |
| 25 | 25 | Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). (i) Normal Quality (i)WithFix-Tile(Choksey/Sika/Pedelite/Rouf) | item25 | 2.97 | Sqm |
| 26 | 26 | 20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. a) In cement mortar 1:3 | item26 | 1379.01 | Sqm |
| 27 | 27 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Department (iv) 0.60 mm thick\n | item27 | 38.28 | Sqm |
| 28 | 28 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Department (iv) 0.60 mm thick | item28 | 4.4 | RM |
| 29 | 29 | Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness, joined together with continuous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts, the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm) and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately) b) With 1st class local wood (Hollock / Gamari/Sundi/ Bonsum) (i) 40 mm thick with panel inserts of 20mm thickness. | item29 | 1.95 | Sqm |
| 30 | 30 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ opening with M.S. flats at required spacing in frame all round, square or round M.S.Bar with round headed bolts and nuts or screws. II Ornamental grill (c) Fixed to Brickwork/P.C.C/R.C.C. | item30 | 463.32 | Kg |
| 31 | 31 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (a)2 Track sliding window (ii) 5 mm frosted glass | item31 | 21.27 | Sqm |
| 32 | 32 | (b)3 Track sliding window (i) 6mm clear glass | item32 | 15.86 | Sqm |
| 33 | 33 | Providing and fixing anodised aluminium framed double leaf doors of approved brand with styles size 45mm x 48mm x 3.2mm, top rails 50mm x 45mm x 2.5mm, lock rails 48 mm x 45mm x 2.5mm, bottom rails 100mm x 45mm x 2.5mm fitted with tapper clips of size 20mm x15mm x1.2mm complete with automatic floor mounted door closure, butterfly type handles, special cylindrical lock, concealed type aluminium tower bolt, neoprene dry set rubber gusket, door felt gusket, etc.complete as directed by the Department at all levels. (i)5mm thick frosted glass and 12mm thick prelaminated particle board | item33 | 3.15 | Sqm |
| 34 | 34 | Providing and fixing anodised aluminium framed single leaf door of approved brand with styles size 45mm x 48mm x 3.2mm, top rails 50mm x 45mm x 2.5mm, lock rails 48 mm x 45mm x 2.5mm, bottom rails 100mm x 45mm x 2.5mm fitted with tapper clips of size 20mmx15mmx1.2mm complete with automatic hydraulic floor mounted door closure, butterfly type handles, special cylindrical locks, concealed type tower bolt, neoprene dry set rubber gusket, etc.complete as directed by the Department at all levels. (i)5mm thick frosted glass and 12mm thick prelaminated board | item34 | 25.41 | Sqm |
| 35 | 35 | Providing, fitting and fixing anodised aluminium framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete etc complete as specified and directed by the department at all levels. (a) with 12 mm thick toughened glass | item35 | 2.52 | Sqm |
| 36 | 36 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | item36 | 1379.01 | Sqm |
| 37 | 37 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (i) Thickness 1.5 mm thick | item37 | 1379.01 | Sqm |
| 38 | 38 | Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | item38 | 973.1 | Sqm |
| 39 | 39 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a) With ready mixed primer. | item39 | 164.62 | Sqm |
| 40 | 40 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. b) High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item40 | 45.56 | Sqm |
| 41 | 41 | Finishing old/new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Deluxe (ICI) paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | item41 | 405.91 | Sqm |
| 42 | 42 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.) (Up to 1st floor level) (ii) Super Ductile (SD) TMT reinforcement bars | item42 | 117.23 | Qtl. |
| 43 | 43 | c) ISI approved Mild steel reinforcement bar (M.S.Bar) | item43 | 1.45 | Qtl. |
| 44 | 44 | Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 | item44 | 1.97 | Qtl. |
| 45 | 45 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia. steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | item45 | 2.52 | Sqm |
| 46 | 46 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | item46 | 5 | RM |
| 47 | 47 | Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. | item47 | 40.62 | Sqm |
| 48 | 48 | Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or equivalent) and water, i.e. 1% solution. | item48 | 248.56 | Sqm |
| 49 | 49 | Pre construction anti - termite treatment by applying in the junction of walls, column with the floor before laying floor and after operation of item no. 26.1.3 above making a channel 30mmx30mm all over the walls and making rod holes @ 150mm apart up to ground level below and applying emulsion @ 11 litres per square meter of vertical plinth wall surface inside the building so as to soak the soil with the emulsion up to the ground level and refill the holes and channel with the original materials obtained in making channels (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or equivalent) and water, i.e. 1% solution. | item49 | 126.54 | Sqm |
| 50 | 50 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (10kg) BRAND : FIRESTOP / FIREND / FIRE SHIELD | item50 | 4 | Each |
| 51 | 51 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia. flush band with fittings A) Parry ware make a) White (i) Universal Closet S Trap (Cat No.C0271) (Anglo Indian) (inclusive of seat cover) | item51 | 4 | Each |
| 52 | 52 | Supplying, fitting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) i) Parry ware make a) White (ii) Deluxe Single Flush (Cat. No. C8091/C8057) | item52 | 4 | Each |
| 53 | 53 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.\n(A) Parry ware Make (a) White (i) New Magnum (Cat. No.C0575)\n | item53 | 3 | Each |
| 54 | 54 | Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader and brass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. (A) Parry ware Make (i) White (Cat. No. C0503) | item54 | 1 | Each |
| 55 | 55 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) 1.13.2 Basin (without pedestal)\n(A) Parry ware Make (a) White (i) Star Basin 550 x 400 (Cat. No.C0450)\n | item55 | 4 | Each |
| 56 | 56 | Providing fitting & fixing stainless steel kitchen sink of Parry ware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately\n(A) Parry ware Make (vi) Grace Deluxe Medium (Bowl Size - 445 x 368 x 190) Glossy\n | item56 | 1 | Each |
| 57 | 57 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | item57 | 4 | Each |
| 58 | 58 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (i) Jaguar Make (a) Continental (Cat.No.ACN-1331N) | item58 | 4 | Each |
| 59 | 59 | Providing, fitting and fixing CP towel rail complete as directed and specified. (iii) Towel rail Diplomat 600mm long (Cat.No.TR-0605) | item59 | 4 | Each |
| 60 | 60 | Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (i) Rupa 32mm (HT/ FT) (Cat.No.WS-0801) | item60 | 4 | Each |
| 61 | 61 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing with clamps etc. as necessary complete at all levels including below G.L as directed and specified. (ii) 110mm dia. | item61 | 40 | RM |
| 62 | 62 | (iv) 75mm dia. | item62 | 15 | RM |
| 63 | 63 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. (ii) 110mm dia. | item63 | 8 | Each |
| 64 | 64 | (iv) 75 mm dia. | item64 | 8 | Each |
| 65 | 65 | Supplying fitting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (ii) 110mm dia. | item65 | 4 | Each |
| 66 | 66 | iv) 75mm dia. | item66 | 4 | Each |
| 67 | 67 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 75mm dia. PVC cowel of ISI make | item67 | 6 | Each |
| 68 | 68 | C.P. Grating (ii) 110mm dia. | item68 | 12 | Each |
| 69 | 69 | Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 19 Kg. weight complete as directed and specified | item69 | 2 | Each |
| 70 | 70 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (Sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | item70 | 3.6 | Cum |
| 71 | 71 | Construction of inspection pit inside measurement 450mm x450mm x 450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | item71 | 22 | Each |
| 72 | 72 | Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches d) 25 mm dia. | item72 | 67 | RM |
| 73 | 73 | (B) Concealed by chiselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure. f)15 mm dia. | item73 | 40 | RM |
| 74 | 74 | Supplying fitting and fixing C.P. bib cock 15mm dia. of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Sona brand (ii) Bib Cock Long Body Code. No. RG-5022 | item74 | 4 | Each |
| 75 | 75 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) Jaguar (iii) 15mm dia.(Concealed stop cock reduced body ) | item75 | 11 | Each |
| 76 | 76 | Supplying and fitting fixing C.P. pillar cock of 15mm dia. of approved brand as specified and directed. SONA make (b) Heavy type | item76 | 4 | Each |
| 77 | 77 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. C ) 25 mm dia. | item77 | 43 | Each |
| 78 | 78 | e) 15 mm dia. | item78 | 3 | Each |
| 79 | 79 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 1000 litre capacity (a) Sintex make | item79 | 1 | Each |
| 80 | 80 | Supplying and planting of ornamental trees (1'-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . SHADE TREE (A) Neem / Mahaneem / Bakul | item80 | 34 | Each |
| 81 | 81 | (D) Debadaru | item81 | 25 | Each |
| 82 | 82 | Flowering Tree (A) Gulmohar / Ashok | item82 | 34 | Each |
| 83 | 83 | Half brick circular tree guard internal dia. 1.25 m and height 1.2 m above ground and 0.02 m below ground bottom two courses laid dry and top three courses in cement mortar 1:6 and the intermediate courses being in dry honey comb masonry as per design complete. | item83 | 93 | Each |
| 84 | 84 | Supplying and planting of ornamental shrub ( below 1'-0" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (D) Thuja | item84 | 46 | Each |
| 85 | 85 | Labour for test boring with 40mm (internal) dia. G.I. pipes including keeping samples of earth at every 2.00 m after first 3.00 m depth and delivering the same in nearest P.W.D. camp in the small tin container (Container, scaffolding, tools etc. will have to be arranged by the contractor at his own cost) | item85 | 90 | RM |
| 86 | 86 | Preparation of site for placement of the drilling rig including excavation of mud pit, circulation drain, collection chamber etc all complete as directed. | item86 | 1 | Job |
| 87 | 87 | Movement of Rig from the Divisional Head Quarter to the drilling site including cost of P.O.L. all complete as directed. | item87 | 10 | Km |
| 88 | 88 | Transportation of all ancillary equipments, camp materials, welding set, rig accessories etc from the Divisional Head Quarter to the drilling site including cost of POL all complete as directed. a) Up to 100.00 Km | item88 | 10 | Km |
| 89 | 89 | Transportation of all store materials like pipes, strainer, cone, socket, clamp, bentonite etc from the Divisional Head Quarter to the drilling site including cost of POL all complete as directed. a) Up to 100.00 Km | item89 | 10 | Km |
| 90 | 90 | Transportation of air compressor from the Divisional Head Quarter to the drilling site including cost of POL all complete as directed. \na) Up to 100.00 Km\n | item90 | 10 | Km |
| 91 | 91 | Construction of temporary accommodation and low cost sanitary facility for drilling staff including cost of camp materials viz. cots, tables, chairs, utensils, dresses, safety helmets etc. and dismantling the accommodation after completion of the work all complete as directed.\n | item91 | 1 | Job |
| 92 | 92 | Boring in soft soil /normal clay/sandy soil by bit of size either 5.5/8 or 6.7/8 or 7.7/8 inch and collecting sampleor soil at every 3.00 m depth in sample boxes with the distinguishing marks including arranging and carriage of necessary boring materials------------- etc all complete as directed. | item92 | 30 | RM |
| 93 | 93 | Boring in hard soil / pebble / gravel by bit of size either 5 5/8"or 6 7/8" or 7 7/8" and collectingsample of soil at every 3.0 m depth or wherever there is a change of strata in sample boxes with the distinguishing marks including arranging and carriage of necessary boring materials / tools /bentonite etc. and withdrawing the drill pipe for lowering well assembly etc all complete as directed.\n | item93 | 90 | RM |
| 94 | 94 | Reboring in soft soil / normal clay / sandy soil by bit of size either 8 1/2" or 9 5/8" or 12" from\neither 5 5/8" or 6 7/8" or 7 7/8" all complete as directed.\n | item94 | 30 | RM |
| 95 | 95 | Reboring in hard soil / pebble / gravel by bit of size either 8 1/2" or 9 5/8" or 12" from either 5 5/8" or 6 7/8" or 7 7/8" all complete as directed. | item95 | 90 | RM |
| 96 | 96 | Extraction of drilling pipes / bits against skin friction at the end of each day and after completion of the operation including washing of the borehole all complete as directed. | item96 | 120 | RM |
| 97 | 97 | Lowering / sinking of well assembly including welding of pipe joints for 200 mm. dia. G.I./ M.S. casing pipe, strainer all complete as directed. | item97 | 120 | RM |
| 98 | 98 | Developing of the D.T.W. with air compressor, Make- Kirloskar / Cumins all complete as directed. | item98 | 42 | Hours |
| 99 | 99 | Supplying and packing pea gravel around the periphery of casing including screening, washing etc. all complete as directed. | item99 | 5 | Cum |
| 100 | 100 | Cost of MS Pipe including VAT, IT, L .Cess & Contractors profiting etc. 200 mm dia of 8mm thick | item100 | 100 | RM |
| 101 | 101 | E.R.S MS slotted strainer | item101 | 20 | RM |
| 102 | 102 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. A) G.I. pipe a) TATA / SAIL (Medium) socket should be welded to the pipes. IV) 50 MM Diameter | item102 | 120 | RM |
| 103 | 103 | Supplying including installation, connection as approved by the Deptt. testing and commissioning of CENTRIFUGAL MONOBLOCK PUMP SET complete as directed and specified by the Deptt. 3 HP single Phase Centrifugal mono block pump set (Crompton Greaves/ Aquatic/ CRI/ V-Guard make) 2900 rpm with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / make Siemens make) . | item103 | 1 | Each |
| 104 | 104 | Supplying including installation, connection as approved by the Deptt. testing and commissioning of SUBMERSIBLE PUMP SET 3 (Three Phase) with steel cable rope and submersible cable complete as directed and specified by the Deptt.\nThree phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guard suitable for 100 mm bore well and above. 3 HP STAGE 7 to 40 with MCB controlled Submersible motor pump set control panel.\n | item104 | 1 | Each |
| 105 | 105 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity.\nWith 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. in surface flat 19 mm ISI marked casing 'n' capping system.\n | item105 | 87.16 | RM |
| 106 | 106 | Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 35/36 KA 415V 50 Hz 3P MCCB (ABB(S6) , Schneider, legrand, Siemens, L&T D-shine make) 160A | item106 | 1 | Each |
| 107 | 107 | Supplying fitting and fixing gun metal check valve including necessary threads to pipes.\na) 50 mm dia. (Heavy type)\n | item107 | 4 | Each |
| 108 | 108 | Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed C) CPVC pipe with CPVC fittings\n(Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) i) 25 mm OD \n | item108 | 139.68 | RM |
| 109 | 109 | ii) 40 mm OD | item109 | 54 | RM |
| 110 | 110 | iii) 50 mm OD | item110 | 160 | RM |
| 111 | 111 | iv) 62.5 mm I D | item111 | 120 | RM |
| 112 | 112 | v) 90 mm I.D | item112 | 150 | RM |
| 113 | 113 | 63 mm Gun Metal Full way valve\n ( Zoloto or equivalent )\n | item113 | 9 | Each |
| 114 | 114 | Supplying and ftting fixing gun metal country pit valve (full way valve) as par specification 50 mm dia. | item114 | 8 | Each |
| 115 | 115 | 40 mm dia. | item115 | 8 | Each |
| 116 | 116 | Providing and laying of a RCC pipe duct, 300 mm dia. across the road extending from drain to drain ….. as par specification and direction. | item116 | 22 | RM |
| 117 | 117 | Steel work welded in built up sections, framed work including cutting, hoisting and fixing in positions and applying priming coat of red-lead paint including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed.\n\n | item117 | 12.57 | Qtl. |
| 118 | 118 | Painting two coats (excluding priming coat) on new steel and other metal surface with aluminium paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) and brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.\n(a)Surfaces over 100mm in width or girth.\n | item118 | 119.06 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
