Providing And Applying External Plaster Using Ready Mix Cement Mortar Plaster Of Approved Make And As Specifiedthe Rate Shall Also Include Making Edges For Columns, Beams, Chajjas, Drip Moulds, Window Jambs, Etc. In Perfect Line, Level And Plumb. -Maharashtra

Providing And Applying External Plaster Using Ready Mix Cement Mortar Plaster Of Approved Make And As Specifiedthe Rate Shall Also Include Making Edges For Columns, Beams, Chajjas, Drip Moulds, Window Jambs, Etc. In Perfect Line, Level And Plumb. Carrying Out Treatment To Deteriortated Concrete Corroded Damaged Reinforcement And Replacing The Damaged Concrete Surface With Polymer Modified Cement Mortar As Specified Below?????.. The Rate Shall Include For Making Necessary Covering Curtains On Sunshades, Roof Slabs, Curing, Etc As Per Site Conditions & Disposing Off The Debris Out Of The Colony Premises, Etc. All Completely Done In Workmanlike Manner As Directed By The Banks Engineer. Providing, Applying Additional Polymer Modified Cement Layer On The Surface Of 15 Mm To 20 Mm Thick Mortar Over The Treated Surface Under Item No. 2 ( A ) Above, All Complete Done In Workmanlike Manner As Directed By The Banks Engineer Providing And Fixing Double Layer Of Expanded Poly Propylene Of 15 X 20 Mm Approx. Opening Size Mesh Of Approved Quality Over The Junctions Of Brick Panel Walls And Rcc Beams Columns Edge Of In All 200Mm Width, Placed 100 Mm ..................... Lifts, All Complete Done In Workmanlike Manner As Directed By The Banks Engineer. I ) Surface Preparation The Existing Surface Shall Be Throughly Cleaned Of All Laitance, Loose Material, Oil Grease Etc. By Wire Brush. Treat All Surface Cracks By Opening It In V Groove Shape By Mechanical Means. Providing And Filling The Cracks Upto 5 Mm Width With Approved Make Ready To Use Elastomeric Sealant Or Equivalent....................... Shall Also Be Painted With Two Coat Of 100 Percent Acrylic Emulsion Approved Make And Shade Over A Coat Of Suitable Primer As Directed By Banks Engineer Carefully Scrapping , Removing The Existing Paint Of Steel Work Preparing The Surface With Metal Enamel Based Paint Putty, Making The Surface Smooth. Providing And Applying 2 Or More Coats Of 1St Quality Synthet

Refer document

Refer document

Refer document