}

Construction Of Parallel Guard Room And Boundary Wall Of Lohia Enclave Residential Scheme Deoria Bypass . As Per Tender Documents, Gorakhpur-Uttar Pradesh

Gorakhpur Development Authority has published Construction Of Parallel Guard Room And Boundary Wall Of Lohia Enclave Residential Scheme Deoria Bypass . As Per Tender Documents. Submission Date for this Tender is 02-02-2021. Building Work Tenders in Gorakhpur Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

26740031
Construction Of Parallel Guard Room And Boundary Wall Of Lohia Enclave Residential Scheme Deoria Bypass . As Per Tender Documents
Open Tender
Indian
Uttar Pradesh
Gorakhpur
02-02-2021

Tender Details

Construction Of Parallel Guard Room And Boundary Wall Of Lohia Enclave Residential Scheme Deoria Bypass . As Per Tender Documents

Key Value

Document Fees
INR 1120 /-
EMD
INR 292500.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: yksfg;k bUDyso vkoklh; ;kstuk nsofj;k ckbZikl ds lekukUrj xkMZ :e o ckmUMªhoky dk fuekZ.k dk;ZA
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Boring and Installing 450mm dia pile and deep 6.0 mtr. 48 Rmt
2 2 Excavation of Foundation In Ordinary Soil (Loam Clay or Sand) including lift up to 1.5m and including filling watering and ramming of excavated earth into space of foundation and removal and disposal of surplus earth including all T&P complete.(PWD,Earthwork SI No-251) SOR-2020 154.9 Cum
3 3 Cement concrete with 4 cm gauge approved stone ballast, approved coarse sand and cement in the proportion of 8:4:1 including supply of all materials labour and T&P etc. required for proper completion of the work. (PWD,Concrete SI No-281) 31.27 Cum
4 4 M-150 class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. (S.I.No-303) 4.64 Cum
5 5 2.5cm. Thick proof course with cement concrete consisting of 1 part of cement 1.5 part of approved coarse sand and 3 parts approved 13mm (½") graded stone grit and including water proofing materials as ordered by the Engineer-In-Charge in the proportion as specified by the manufacturers. (S.I.No-361) 6.82 Sqm
6 6 R.C.C. work with cement approved coarse sand and 2cm (3/4") gauge approved stone grite in the propertion of 1½:3 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including Necessary centering and shuttering etc. and also including supply of all materials, labour and T&P etc. requirrd for proper completion of the work. Binding wire cost being included in the item. (As in item 283 above but in R.C.C. Raft foundation and footing with 2cm (1:1½:3) gauge approved stone ballst. (S.I.No-287(A) 45.54 Cum
7 7 M-150 class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. 15.37 Cum
8 8 R.C.C. work with cement approved coarse sand and 2.0cm (3/4") gauge approved stone grit in the proportion of 1:1½:3 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and biding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all material, labour and T&P etc. required for proper completion of the work. binding wire cost being included in the item. (S.I.No-284A) 4.18 Cum
9 9 R.C.C. work with cement approved coarse sand and 2cm (3/4") gauge approved stone grite in the propertion of 1½:3 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including Necessary centering and shuttering etc. and also including supply of all materials, labour and T&P etc. requirrd for proper completion of the work. Binding wire cost being included in the item. (As in item 283 above but in R.C.C. Raft foundation and footing with 2cm (1:1½:3) gauge approved stone ballst. (S.I.No-287(A) 50.24 Cum
10 10 R.C.C. work with 1:1½:3 cement coarse Sand for Column. 19.78 Cum
11 11 Mild steel or iron work in plain work such as in reinforced concrete or reinforced brick work (when not included in over all r ates) wrought to required shapes as necessary and bending for the proper completion of the work and including supply of steel and its wastage etc. and all labour and plants required for proper completion of work note: the steel shall be bent cold and all bends hooks and authorised over lapping shall be measured. (S.I.No-504) 92.07 Qtl.
12 12 Mild steel or iron work of small sizes and sections such as holding down bolts, hold fasts, Tie rods gratings etc. (when not including in over all rates) wrought of required from including supply of steel bolts and nuts, and wastage etc. and their fixing labour and Tools and plants required for the proper completion of the work. (Fabricatio of door window fram including cost of hings.) (S.I.No-502(b) 178 Qtl.
13 13 Providing and fixing 1mm thick MS Sheet door frame 40x40x6 angle Iron. (S.I.No-502(b)/2020 0.45 Qtl.
14 14 Apply primixing coat over new steel and other metal. S.O.R. No-1 (2020) Chapter-15) 233.62 Sqm
15 15 Painting first coat over priming coat (But excluding cost of priming coat) on e wood or steel and other metal surface with superior synthetic enamel standard make brushing to give an enen shade and finish and including cleaning the surface of all dirt dust and other foreign matter sand papering and stripping including cost of all materials, labour, T&P etc. required for the proper complition of the work.. S.O.R. No-2 (2020) Chapter-15) 233.62 Sqm
16 16 12mm thick plaster with cement mortar in proportion of 1:4 cement and coarse sand of 2.25 F.M. over brick work minimum thickness not be less than 10mm including supply of all materials, labour and T&P etc. required for the proper completion of the work. (including racking & washing surface) (S.I.No-584(a)/20 64.32 Sqm
17 17 12mm thick plaster with cement and coarse sand 1:4 (rough side) 91.5 Sqm
18 18 providing and laying "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrelle cement concrete water rpoofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cmx30cm. and side wall parapet shall be mono tythle palster wall upto 30cm. higher and junction and comer shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetle water proofing compound @ 2% by weight & including S/o all material, labour T&P etc. compoete for proper completion of work. (Chapter-11 New item-1) 18.38 Sqm
19 19 Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. (D.S.R. No-13.80/18) 312.22 Sqm
20 20 Finishing wall with Acrylic smooth enterior paint. 312.22 Sqm
21 21 2.5 mm thick plain cement concrete floors with 1:2:4 cement, approved coarse sand 20mm, gauge graded approved stone chips laid in panels and finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing the over lapping mortar as the joints of panels and giving them a uniform finish including supply of all materials, labour and tools and plants etc. required for the proper completion of the work (S.O.R. No-601) 10.31 Sqm
22 22 Supply and fixing 6mm. thick CHINA white glazed tiles (ceramic tiles) in flooring or skirting or dado with 1:3 cement and approved coarse sand mortar and te joints finshing with white cement slurry, jointing and polishing complete including supply of all materials and wastage labour and tools and plants etc. required for the proper completion of the work. (S.I.No-628) 13.91 Sqm
23 23 Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreouschina flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standardmake and mosquito proof coupling of approved municipal designcomplete, including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid (D.S.R. No-17.3.1) 1 No
24 24 Providing and fixing white vitreous china wash basin including makingall connections but excluding the cost of fittings Flat back wash basin of size 550x400 mm (D.S.R. No-17.25.2) 1 No
25 25 Paing for switch board plug. (S.O.R. No-134 (C ) 3 Nos
26 26 Wiring/Pointing for fan . (S.O.R. 133 (C ) 2 Nos
27 27 Wiring/Pointing for Light . (S.O.R. 131 (C ) 3 Nos
28 28 Providing and fixing switch board. 3 modular. (S.I.No-1152(B)/18 3 Nos
29 29 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling & testing ofjoints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes (D.S.R. No-18.9.3) 12 Rmt
30 30 Providing and fixing 1000 Ltr. Water Tank. 1000 Ltr
31 31 Providing and fining P.V.C. pipe for toilet 6" dia. 110mm dia. (A.R.) 5 Rmt
32 32 R.C.C. work with cement approved coarse sand and 2cm (3/4") gauge approved stone grite in the propertion of 1:2:4 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including Necessary centering and shuttering etc. and also including supply of all materials, labour and T&P etc. requirrd for proper completion of the work. Binding wire cost being included in the item. (S.I.No-283) 0.46 Cum
33 33 Supply & fixing of fully panneled cooercial quality Kanju sitapur ply or other approved plywood flush shutter 3cm (1x¼") and supply of all materials, laoour and tools and plants required for the proper completion of work. (S.I.No-470) 5.67 Sqm
34 34 Providing and fixing Nahani Tap. 1 no
35 35 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (15mm nomi9nal bore. (PWD S.O.R. 18.51.1) 3 Nos
36 36 Providing and filing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS 8931 (15mm nominal bore. (PWD SOR No-18.52.1) 2 Nos
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail