}

Day To Day Petty Repairs To Misc B/R And E/M Items Dad Complex , Nchc Powai Routing Cleaining /Desluding Of Sewage Lines And Misc Works At Dad And Kv Complex Under Ge ( Nw ) Bhandup, POWAI-Maharashtra

Military Engineer Services-MES has published Day To Day Petty Repairs To Misc B/R And E/M Items Dad Complex , Nchc Powai Routing Cleaining /Desluding Of Sewage Lines And Misc Works At Dad And Kv Complex Under Ge ( Nw ) Bhandup. Submission Date for this Tender is 13-02-2021. Electrical Products Tenders in POWAI Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

26736374
Day To Day Petty Repairs To Misc B/R And E/M Items Dad Complex , Nchc Powai Routing Cleaining /Desluding Of Sewage Lines And Misc Works At Dad And Kv Complex Under Ge ( Nw ) Bhandup
Open Tender
Indian
Maharashtra
POWAI
13-02-2021

Tender Details

Day To Day Petty Repairs To Misc B/R And E/M Items Dad Complex , Nchc Powai Routing Cleaining /Desluding Of Sewage Lines And Misc Works At Dad And Kv Complex Under Ge ( Nw ) Bhandup

Key Value

Document Fees
INR 500 /-
EMD
INR 98000.0 /-
Tender Value
INR 49 Lakhs /-

BOQ Items

Name of Work: DAY TO DAY PETTY REPAIRS TO MISC B/R AND E/M ITEMS DAD COMPLEX , NCHC POWAI ROUTING CLEAINING /DESLUDING OF SEWAGE LINES AND MISC WORKS AT DAD AND KV COMPLEX UNDER GE (NW) BHANDUP
Sl. No. Item Description and Drg No. Item Code / Make Quantity Units
1 1 Petty repairs to wooden joinery works such as Resecuring or easing and adjusting of doors, windows kitchen cabinets in any size, refixing hinges etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engineer In charge. (Note : Replacement of builders hardware if required shall be measured and paid separately as supply only.) Note item No 1 and 2 : (a) The contractor will be alloted complaint on daily basis and sufficient resources will be deployed by him/her for completion of day to day comaplaint within 24 Hrs from the time of reporting. Any delay beyond above mentioned time limit suitable penalties as mentioned in relavant clause of Contract.\n(b) A detailed log of complaints with completion/ non-completion remarks from users/MES will be maintained by the contractor and same will be updated on daily basis in consulatation with Engr-in-Charge or JE detailed by him.\n(c) The contractor will make suitable arrangment for emergent complaints and will notify auth rep/Engr-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond state time limit set for disposal of complaint. In case of any dispute the decision of accepting officer will be final and binding in this regard.\n(d) The quoted rated deems to be inclusive of transportation and other expenses required for the resource deployment at the complaint site around scattered NCH colony powai.\n(e) The contractor will maintain suitable inventories and range of spares required to meet the complaints as same will be reviewed peridically by Engr-in-charge to streamline complaints disposal system. 1100 Each
2 2 Petty repairs to plumbing/internal water supply works such as repair to leaking bib taps, pillar taps, mixers stop cocks by tightening and providing spindle,washer repairs to float valves, low leveled cistern to the satisfaction of user as assigned by the Engineer In Charge. 750 Each
3 3 Suply only stainless steel butt hinges, 100mm, medium weight complete all as specified and directed 150 Each
4 4 Supply only aluminium, anodised, barrel tower bolts of extruded section of size 200mm complete all as specified and directed. 150 Each
5 5 Supply only aluminium, anodised, barrel tower bolts of extruded section of size 100mm complete all as specified and directed. 150 Each
6 6 Supply only extruded aluminium alloy handles, fabricated type of size 150mm in any position complete all as specified and directed. 150 Each
7 7 Taking down aluminum door shutter carefully and refixing the same in position replacing rubber bead, worn-out door closer mortice lock and replacing existing broken aluminium section / glass / wire cloth / Bakelite sheet, if any and making door shutter serviceable, for work complete all as specified and directed.\nNote - Aluminum Section / Glass / wire cloth / Bakelite sheet, shall be measured and paid separately as supply only. Fixing element of these items shall be deemed to be included in quoted rate. \n 20 Sqm
8 8 Taking down aluminum window shutter carefully and refixing the same in position replacing rubber bead, worn-out handles and replacing existing broken Aluminum section / glass/wire cloth/backlite sheet, if any, and making window shutter serviceable, complete all as specified and directed.\nNote - Aluminum section / Glass / wire cloth / Bakelite sheet, handle etc shall be measured and paid separately as supply only. Fixing by element of these items shall be deemed to be included in quoted rate. 100 Sqm
9 9 Taking down chowkat or frame with shutter (without taking off shutter from the frames) not exceeding 1.5 Sqm each complete as specified and directed. 90 Each
10 10 Taking down chowkat or frame with shutter (without taking off shutter from the frames), exc 1.50 sqm but not exc 4.0 sqm each complete as directed 5 Each
11 11 Taking down shutters of any description, exc 1 Sqm and n.exc 2 sqm each complete all as specified and directed 5 Each
12 12 Taking down and refixing in the same opening shutters of any description exceeding 1 Sq.m but not exceeding 2 Sq.m each complete all as specified and directed. 20 Each
13 13 M&L for IInd class Hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joint complete all as specified and directed. 0.15 Cum
14 14 S & F,IInd class hardwood 35mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. 10 Sqm
15 15 S & F 2nd class hardwood, glazed and skelton shutter, 35mm thick, open rebated and prepared to receive glass, gauze etc, divided into square with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plane, chamfered or rounded, fitted with cut and mitered bead for securing glass, gauze etc, size of member of shutters as specified in SSR Part -I, section 8, class 8.24(a) (Door shutter), supplied and fitted to chowkats all as specified and directed. 10 Sqm
16 16 M&L , in repairs, IInd class Hard wood plain fillets squares, rectangular or triangular in section, wrought, secured with screws, sectional area exc 13 Sqcm and not exc 25 Sqcm complete all as specified and directed. 20 RM
17 17 M&L for 19mm thick block boards, grade - I quality, exterior grade, decorative type with decorative face veneer on both sides with external teak wood lipping, 6mm thick alround fixed with screws to timber frame work for cuboard self or shutters etc, complete all as specified and directed.. 20 Sqm
18 18 S&F for Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per spcification & drawing etc, complete all as specified and as directed. 95 RM
19 19 S&F for Factory made solid PVC Moulded door shutter , 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm th. Moulded PVC sheet on the front face & 2mm plain coour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with wood free EPS etc, complete all as specified and as directed. 30 sqm
20 20 M&L for 20 to 25mm thick machine cut and machine polished cudappa stone slab for kitchen plateform jointed and set in CM 1:3 and fixed including rounding to edge of stone slabs one side edge etc complete all as specified and as directed 20 Sqm
21 21 M&L for 18-20mm thick granite(of any type) work table rubbed and polished as in jambs, pillars, door and windows-cill, cooking platform , jambs, wash basin platform and the like in cement mortar (1:4) including pointing in white / coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting of oval shape for fixing of counter wash hand basin etc over and including 10mm thick rendering / screed in CM 1:4 on fair faces of brick/concrete surfaces complete all as specified and directed. 10 Sqm
22 22 S&F machine cut and machine polished, green marble, 18-20mm thick on horizontal or vertical surface,as in window cills and jambs bedded, jointed and pointed with neat grey cement slurry and pointed with coloured or white cement with pigment to match over and including rendering coat of 10 mm thick in CM 1:4 all as specified and directed. 50 Sqm
23 23 S&F standard aluminum section powder coated in partition / frame and door shutter, sliding windows / ventilators and places otherwise not specified cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass or wire cloth or Bakelite sheet and all necessary fittings, hinges, screws, plugs, locking arrangements for windows, Nylon ball bearing etc completed all as specified and directed (Aluminum section shall be of make Jindal / Hindalco / Indalco).\nNote :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet / wire cloth / mortice lock / locking stay / floor spring / floor door stopper only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate. 500 Kg
24 24 S&F aluminum anodised grill DG- 202 ( 10 mm x 5.2mm ) of Deco grill or equivalent fixed with 'F' section size not less than 20.60 x 15.20 x 1.5mm thick of approved make all as specified and directed.\nNote : (i) Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE.\n(ii) Minimum thickness of anodizing shall be 15 microns. 200 kg
25 25 Supply only 4mm thick sheet figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane etc complete all as specified and directed 10 Sqm
26 26 Supply only 4.80mm thick glass ordinary quality plain not exc 0.5 Sqm each pane with including wooden/rubber beading or gasket for aluminium section complete all as specified. 55 Sqm
27 27 Supply only 4.80 mm thick glass ordinary quality in plain exc 0.50 Sqm each pane including rubber beading or gasket for aluminium section complete all as specified. 10 Sqm
28 28 Supply only for 6mm thick bakelite sheet prelaminated both side with decorative choice laminations for aluminium frame work with including rubber beading or gasket for aluminium section complete all as specified. 10 Sqm
29 29 Supply only stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed. 35 Sqm
30 30 S&F bands, straps supports or stay heavy for large gates, hook and pintle hinges clamps, hold fasts, wall tiles, hooks for hanging fans and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. 10 Kg
31 31 M&L for providing cement concrete type C1, 1:3:6, using 20mm graded stone aggregate as in bed block for hold fast, coping etc including necessary form work complete all as specified and directed. 0.25 Cum
32 32 Hacking out old brocken glass (any thickness, size, quality or description) from wooden / steel frame or stone, concrete or brick surrounding, glazed with putty or fixed with beads. 15 Sqm
33 33 S&F for 4.0mm thick sheet glass ordinary quality and glazing with oil putty in steel windows and teak wood beading in wooden shutters square not exc 0.5 Sqm in each pane. 10 Sqm
34 34 All as per item No-33 above hereinabove but 4.0mm thick figured glass pin headed type 5 Sqm
35 35 S & F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring of length 140mm fixed in floor etc complete all as specified and directed. 50 Each
36 36 S &F, in repairs, aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with in wooden windows, doors etc,and fixing of teak wooden beeding complete all as specified and as directed by the Engineer in charge. 50 Sqm
37 37 Supply and fix aluminium alloy anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolt of extruded section of size 250 mm fixed at any position all as specified and directed. 10 Each
38 38 S&F in stainless steel butt hinges, 100mm, medium weight complete all as specified and directed 90 Each
39 39 S&F in extruded aluminium alloy handles, fabricated type of size 150mm in any position complete all as specified and directed. 60 Each
40 40 S&F in aluminium, anodised, barrel tower bolts of extruded section of size 150mm complete all as specified and directed. 60 Each
41 41 S&F in repair 0.45mm thick Plain aluminium sheeting , alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the pieces can be cut) bottom of panelled shutter complete all as spd and directed. 10 Sqm
42 42 S&F for 600 x 450mm looking mirror of selected quality with chromium plated brass screws and cup washers etc complete all as specified & directed.Make:Prayag polymers Pvt Ltd or equivalent 20 Each
43 43 S&F in repair for 20mm dia fancy type chromium plated curtain rods with fixing fancy brackets, brass screws etc complete all as specified and directed 50 RM
44 44 S&F in repair for 20mm dia aluminium coated curtain rods complete all as specified and directed 100 RM
45 45 S&F in repair brass chromium plated towel rail 20mm dia 'D' type 600mm long between flanges, including chromium plated brass screws etc complete all as specified and directed. 20 Each
46 46 S&Fin repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and directed. 5 Each
47 47 S&F in repairs vitreous china squatting pan, white, orissa pattern pan of size 580 mm x 440 mm of standard quality with integral foot rests,and including 'P' trap or 'S' Trap complete including connection to trap and to flushing pipe, anti syphonic pipe etc., complete all as specified and directed. 10 Each
48 48 S&F in repairs wash hand basin, vitreous china white of size 550x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets,32mm waste fitting and waste pipe of 32 mm bore, brass, chromium plated for glazed ware wash basin and 15mm dia pillar taps chromium plated fancy type etc complete all as specified and directed. 10 Each
49 49 Supply and fix in repair 10 ltr, PVC, valveless, syphonic action type, flushing cistern, low level/ high level including inlet, ball valve, float and handle including brackets with and including PVC flush pipe 32 mm bore, connecting to WC etc, complete all as specified and directed. 15 Each
50 50 S&F in repair for CP concealed stop cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 5 Each
51 51 S&F in repairs CP angle cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 25 Each
52 52 S&F in repairs CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed. 25 Each
53 53 S/F in repairs brass Chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed 15mm bore fancy type. 5 Each
54 54 S&F in repair CP pillar taps 15mm bore., cast copper alloy, chromium plated fancy type complete all as specified and directed. 10 Each
55 55 S&F in repair 15 mm bore Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed. 10 Each
56 56 M&Lin repair waste fitting of 32 mm bore brass, chromium plated for glazed ware wash basin etc complete all as specified and directed. 10 Each
57 57 M&Lin repair waste fitting of 40 mm bore brass , chromium plated for glazed ware for sink coulpling etc complete all as specified and directed. 5 Each
58 58 S/Fin repair waste pipe for WHB/ sink 32mm bore fixed to wash hand basin/sinks coupling length pipe 0.90 mtrs each complete all as specified and directed. 46 Each
59 59 S/Fin repair 15mm size PVC connection with PTMT nuts 450mm length.complete all as specified and directed. 50 Each
60 60 S&F in repair stainless steel grating in ground shape 100mm dia complete all as specified and directed. 10 Each
61 61 All as per item No 60 above but with hole complete all as specified and directed. 10 Each
62 62 S&Fin repair plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and directed. 5 Each
63 63 S&F stainless steel kitchen plate rack size 900x600mm etc complete all as specified and directed. Make:Nirali, Bule star, Prayag polymers Pvt Ltd or equivalent 10 Each
64 64 S&F stainles steel sink with drainage board , 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers including CI cantilever bracket, connecting union etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm including supply and fixing bib tap CP with long body screwed for iron pipe complete all as specified and directed. Make : Nirali, Bule star or equivalent. 5 Each
65 65 S&F in repair low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls or laid in floors etc. 10 RM
66 66 S&F in repairs chromium plated shower roses 125mm size with or without swivel joint including fixing to steel pipe or union etc.complete all as specified and directed. Make:Prayag polymers Pvt Ltd or equivalent 20 Each
67 67 S&F in repair soap dish complete all as specified and directed. 10 Each
68 68 S&F in repair Toilet paper holder complete all as specified and directed. 5 Each
69 69 S&F in repair Health faucet with 1 mtr tube & hook complete all as specified and directed. 5 Each
70 70 S&F in repair CP corner glass with brass bracket screws etc complete all as specified and directed. 5 Each
71 71 Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed. 100 RM
72 72 Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed. 100 RM
73 73 S&F 15mm bore U- PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings completed all as specifiec and directed. 100 RM
74 74 All as per item No 73 above but 20 mm bore. 100 RM
75 75 S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 20mm bore complete all as specified and directed. 5 Each
76 76 S & F in repair 160mm bore PVC rain water pipe single socketed any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps 8mm dia with two nuts wall nails etc including taking down and filling nail holes on the walls to prevent seepage and making good complete all as specifed and directed. 80 RM
77 77 S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. 50 RM
78 78 S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. 50 RM
79 79 S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed. 15 Each
80 80 S&F in 110 mm bore PVC (SWR) tee of any radius complete all as specified & directed. 10 Each
81 81 S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed. 15 Each
82 82 Demolition of concrete in ground floors (un re-inforced) and paving n.exc. 15 cm thickness (below or above ground level) and removal of rubbish/ demolished materials out of MD land complete all as specified and directed. 4.8 Cum
83 83 M&L providing cement concrete type B0, 1:2:4 (12.5mm graded aggregate) 30mm thick as in flooring all as specified and directed. 120 Sqm
84 84 Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials out of MD land complete all as specified and directed. 250 Sqm
85 85 M/L for Non-skid ceramic tiles (Coloured) Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. 40 Sqm
86 86 M&L for glazed ceramic coloured tiles 300x200mmx7mm thick in vertical surfaces such as skirting/dado and risers to steps and including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles. etc, all as specified and directed. 160 Sqm
87 87 M/L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:6 laying floor finished complete all as specified and directed. 80 Sqm
88 88 M/L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqm in vertical surfaces such as skirtings, dados etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles.complete all as specified and directed. 8 Sqm
89 89 M&L for vitrified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 laying floor finishesed complete all as specified and directed. 75 Sqm
90 90 M&L for vitrified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in walls skirting etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles.complete all as specified and directed. 7 Sqm
91 91 M&L for preparation of old plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and there after applying one coat of white wash complete all as specified and directed. 800 Sqm
92 92 M&L for preparation of old decorated surfaces of ceiling brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying one coat of white wash complete all as specified and directed. 1000 Sqm
93 93 M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying with roller one coat of oil bound distemper complete all as specified and directed. 8000 Sqm
94 94 M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and thereafter applying with roller Two coat of oil bound distemper including application of wall care putty for smooth finish.etc complete all as specified and directed. 2000 Sqm
95 95 M&L for preparation of old wooden surfaces of any description, not other wise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 1000 Sqm
96 96 M&L for preparation of old decorated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. 100 Sqm
97 97 M&L for preparation of old acrylic surfaces of walls/ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots, washing down with water, filling of cracks with Dr fixit crack filler or equivalent make and applying one coat of 100% antifungal acrylic paint of approved shade over a coat of acrylic primer including necessary scaffolding work etc complete all as specified and directed. 2000 Sqm
98 98 M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying with roller one coat of plastic emulsion paint including application of Putty for smooth finish.etc complete all as specified and directed. 500 Sqm
99 99 Demolition of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles.complete all as specifed and directed 5 Cum
100 100 M&L for brick work with sub class B old size bricks and of class designation 35 (Minimum compressive strength 35 Kg/Sqcm) , straight or curved on plan exc. 6metre mean radius, built in cement mortar 1:6, complete all as specified and directed. 5 Cum
101 101 Taking down cement or cement lime plaster of any description on brick or stone wall surface including raking out joints, hacking for key, scrubbing down with water and removing debris outside MD land etc complete all as specified and directed. 910 Sqm
102 102 M & L for rendering 10 mm thick in CM 1:6 on brick walls or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed. 500 Sqm
103 103 M&L for rendering 5 mm thick in CM 1:3 as in ceiling finishing even and fair etc complete all as specified and directed by EIC. 150 Sqm
104 104 M/L for 15mm thick rendering in CM 1:4 on surface of wall mixed with water proofing compound and shall be scored to provide key for rough finishing coat. including necessary scaffoldings etc complete all as specified and directed Note:- WPC shall be measured and paid seperately. 300 Sqm
105 105 Supply only integral water proofing compound. 55.68 Kg
106 106 M&L chipping, removing carefully concrete surface by low impact hamer/bracker without damaging the structure incl preparation of old surfaces of reinforcement bars as per manufacturer's instruction and disposal of debris out side MOD land and applying anticorrosive protective coating for steel reinforcement surfaces and allpying epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new mortar, by brush application and building up the profile of structural members by using polymer modified mortar (Molith-PMM) OR Polymer mortar HB of Dr Fixit, upto 20mm thickness including levelling, profiling etc complete all as specified and directed. Make : Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE 100 Sqm
107 107 M&L for preparation of new plastered surfaces and applying three coats of white wash on wall as specified and directed 50 Sqm
108 108 M&L for preparation of new plastered surfaces on ceiling and applying three coat of white wash etc complete all as specified and directed 150 Sqm
109 109 M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over coat of alkali resistant primer with roller etc complete all as specified and directed. 550 Sqm
110 110 M&L for for preparation of new plastered surfaces on walls, chajjas and applying two coats of 100% anti fungal weather resistant acrylic paint over a coat of primer in approved shade and as per manufactur's instructions complete all as specified and as directed. 300 Sqm
111 111 S & F in repairs Anodised alluminium snap grid frame work size 605x605mm for false ceiling all as specified. 101 Sqm
112 112 M & L in repairs for 12 mm thick perforated particle board / tiles for insulation and acoustic purposes, 60 x 60 cm in size, fixed with screws to timber frame work or with staples on snap grid in ceilings, flat or sloping complete all as specified and directed. 101 Sqm
113 113 M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface of any discription not otherwise discribed over 10 cm width or girth, complete all as specified and directed. 40 Sqm
114 114 Cleaning of PVC water tanks of capacity upto 500 litres at any height (on accessible / inaccessible of roofs) by removing all scale, dirt, mud, any toreign material and removing accumulated silt other dirty substance, algae, fungus and other bacterial material from sides / bottom of tank cleaning shall be done by means of wire brushes / water jet application of UV radiator and approved chemical (chloriten) unpluging flushing out complete, cleaning the tank and again cleaning with fresh water and plugging back from mouths of circulating pipes. The entire cleaning process shall be carried out without damaging the water tank. After cleaning writing letter / figurers in black back ground with enamel paint of the following capacity cleaning of PVC water tank :-\n(i) Date of Cleaning\n(ii) Next due date of cleaning\n(iii) Remove of the existing lettering / figures completely\n 20 Each
115 115 All as per item no. 114 above but of capacity exc 501 ltr but not exc 1000 litres 4 Each
116 116 All as per item no. 114 above but of capacity exc 1001 ltr but not exc 2000 litres 142 Each
117 117 All as per item no. 114 above but of capacity exc 3001 ltr but not exc 5000 litres 31 Each
118 118 S&F in repairs ball valve PVC with polythene epoxy coated aluminium rod & high density ball of size 20 mm dia complete all as specified and directed 30 Each
119 119 S&F in repairs ball valve PVC with polythene epoxy coated aluminium rod & high density ball of size 25 mm dia complete all as specified and directed 32 Each
120 120 Taking down carefully copper/alumunium point wiring for light, fan, bell, socket or power complete including fittings such as switches, ceiling roses pendents regulators, sockets, Tube lights etc, removing materials from site and serviceable material re-use at site and making good distrubed surface of wall, floors etc all as specified and directed. 335 Per Point
121 121 Material and labour for point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade FRLS cable multistranded copper conductor single core in casing caping of suitable size complete with sunken iron pressed steel terminal box 2 mm thick for fitting mounting switch/ sockets regulators etc with hylam sheet 3 mm thick cover and with 1.5 sqmm PVC insulated copper conductor earth wire and connected to common earth dolly for the following points all as specified and directed. Make of wire- Polycab/Havells/Finolex \n(a) One light point controlled by one switch 100 Per Point
122 122 (b) One fan/exhaust fan point controlled by one way switch 50 Per Point
123 123 (c) One 5A 2pin/3pin socket on same board. 30 Per Point
124 124 (d) One bell point controlled by one switch 20 Per Point
125 125 (e) One 3 pin socket point 5A controlled by switch on independent board 75 Per Point
126 126 All as per item No 121 here-in-before but for 3 pin socket outlet 15 Amp independent with cable 2.5 sqmm unsheathed stranded 1100 Volts grade complete with 2.5 sqmm PVC insulated earth wire and connecting to earth dolly all as specified and directed. 60 Per Point
127 127 S&F switch piano type 5 Amp single pole one way complete all as specified and directed. 180 Each
128 128 S&F ceiling rose surface backelite, three terminal complete all as specified and directed. 150 Each
129 129 S&F bell push 5 Amp piano type single pole 230 volts one way complete all as specified and directed. 20 Each
130 130 M&L for socket outlet 2 in 1, 3/5 pin 5 Amps multipurpose flush type. 30 Each
131 131 S&F switch socket combination multi purpose 5 pin 5 Amp flush type complete all as specified and directed. 60 Each
132 132 S&F switch socket combination multipurpose 15 Amp ,2 in 1 , 3 /5 pin flush type complete all as specified and directed. 60 Each
133 133 S&F in repair ceiling fan regulator step type 230V, all as specified and directed 30 Each
134 134 S&F in repair ceiling fan regulator socket type 230V, all as specified and directed. 30 Each
135 135 S&F in repairs of LED indoor decorative aluminium extruded T5 lED batted integrated type tube light fitting, suitable and including 1x22W, 230V, bipin holders, connector block etc complete with all accessories internally prewired and including connected up with twin core twisted flexible copper conductor cable with suitable sizes all as specified and directed. 125 Each
136 136 S&F in repairs of LED indoor decorative aluminium extruded T5 lED batted integrated type tube light fitting, suitable and including 1x12W, 230V, bipin holders, connector block etc complete with all accessories internally prewired and including connected up with twin core twisted flexible copper conductor cable with suitable sizes all as specified and directed 50 Each
137 137 S&F in repairs of LED bulb 230V, holder type 7/9 watt complete 400 Each
138 138 S&F in repairs of angular batten holder PVC / poly carbonite body and brass internal parts with back plate mounted on PVC square box complete 25 Each
139 139 Taking down main switches DBs with sheet metal enclosure 2/4/6/8 way SPN/TPN/DBs etc all as specified and directed. 72 Each
140 140 S&F MCB DB SPN 08 way double door, 240 Volts with 200 rated bus bar complete all as specified. 30 Each
141 141 S&F MCB DB SPN 04 way double door, 240 Volts with 200 rated bus bar complete all as specified. 3 Each
142 142 S&F MCB DB SPN 02 way, 240 Volts complete all as specified. 3 Each
143 143 S&F MCB DB TPN 04 way double door, 415 Volts with suitable bus bar complete all as specified. 3 Each
144 144 S&F MCB DB TPN 06 way double door with sutitable bus bar complete all as specified. 3 Each
145 145 Fixing only MCB DB SPN 08/06/04 way double door, 240 Volts in concealed /wall with supporting wooden board and fillup complete disturb area with bricks and cement and paint with existing colour all as specified and directed. 30 Each Job
146 146 Fixing only MCB SP 240 Volts 6 to 32 Amps complete all as specified and directed. 150 Each
147 147 Fixing only MCB SPN 240 Volts 6 Amp to 32 Amp complete all as specified. 30 Each
148 148 S&F in repairs of MCB TPN 440 Volts 63 Amp complete all as specified. 5 Each
149 149 S&F in repairs of MCB TPN 440 Volts 40 Amp complete all as specified. 5 Each
150 150 Taking down and opening / dismantling of ceiling fan, cleaning complete, oiling / greasing including replacement of capacitor/worn out parts e.g. bearing, bush, shaft, etc.where necessary, checking for smooth running including painting with one coats of synthetic enamel paint cleaning and preparing the surface and refixing, testing and commissioning complete all as specified and directed by Engineer-in-Charge. Note : Spare parts like capacitor, bush and bearing will be measured and paid separately under respective items. 150 Each
151 151 Taking down and opening / dismantling of ceiling fan, 1200/1400 mm sweep and taking out old unserviceable winding and M & L for rewinding the same with super enamelled copper wire of existing/same gauge including all insulating material required as per standard practice, varnishing the same and drying, cleaning the fan bearing/bushing and greasing/oiling and reassebling, testing complete including spy painting with one coats of synthetic enamel paint after preparing rusted surface and refixing, testing and commissioning complete all as specified and directed by the Engineer-in-Charge. Note : 1) Spare parts like capacitor, bush and bearing will be measured and paid separately under respective items. 2) winding fan warranty will be one year. 75 Each
152 152 Taking down and opening / dismantling of exhaust fan, 250/300 mm sweep and taking out old unserviceable winding and M & L for rewinding the same with super enamelled copper wire of existing/same gauge including all insulating material required as per standard practice, varnishing the same and drying, cleaning the fan bearing/bushing and greasing/oiling and reassebling, testing complete including spy painting with one coats of synthetic enamel paint after preparing rusted surface and refixing, testing and commissioning complete all as specified and directed by the Engineer-in-Charge. Note : 1) Spare parts like capacitor, bush and bearing will be measured and paid separately under respective items. 2) winding fan warranty will be one year. 40 Each
153 153 Taking down and opening / dismantling of exhaust fan 450 mm sweep and taking out old unserviceable winding and M & L for rewinding the same with super enamelled copper wire of existing/same gauge including all insulating material required as per standard practice, varnishing the same and drying, cleaning the fan bearing/bushing and greasing/oiling and reassebling, testing complete including spy painting with one coats of synthetic enamel paint after preparing rusted surface and refixing, testing and commissioning complete all as specified and directed by the Engineer-in-Charge. Note : 1) Spare parts like capacitor, bush and bearing will be measured and paid separately under respective items. 2) winding fan warranty will be one year. 10 Each
154 154 Supply only bearing Suitable for existing ceiling fan of 1200/1400mm sweep all as specified and directed 200 Each
155 155 Supply only bush Suitable for existing ceiling fan 1200/1400mm sweep all as specified and directed 150 Each
156 156 Supply only switch piano type 5/6 Amp single pole one way complete all as specified and directed. 180 Each
157 157 Supply only call bell buzzer AC, 230 Volts single pole all as specified and directed. 20 Each
158 158 Supply only switch socket combination multi purpose 5 pin 5 Amp flush type complete all as specified and directed. 85 Each
159 159 Fixing only ceiling fan regulator, 230V, retrived item Ser No 1 all as specified and directed. 30 Each
160 160 Supply only capacitor 2.5/3 mfd capacity 230 volts all as specified and directed 400 Each
161 161 Material and labour in repair of submain wiring complete with two core 04 sqmm (nominal core) PVC insulated unsheathed 1100 volts grade FRLS cable multi stranded copper conductor single core in PVC conduit/Casing capping of suitable size complete with one core of 04 sqmm PVC insulated unsheathed, FRLS green colour copper conductor as earth wire connecting to earth dolly. Note :-02 run of 4 sqmm and 01 run of 4 sqmm wire and one run of PVC conduit/casing capping shall be measured as one Running Meter length) 350 RM
162 162 Supply ands fix in repairs electronic type static watt hour energy meter tamper proof made out of polycarbonate casing of class I accuracy confirming to IS 12779 and suitable for LT single phase 02 wire AC 230 volts, 50 Hz, 5-30 Amps with fully tamper proof low consumption LED display backlite LTRTC optical communication port with facility storage of data and for downloading of data (measures & display KWH, V, I, KW, PF, last month history of KWH & MD in KW) and including dismantling of existing unseviceable energy meter and deposited to MES store yard. \nNote :- (a). The meter shall display in absence of power supply (b) Old electric meter shall be deposited in E/M store yard on own contractor cost. 20 Each
163 163 M & L in replacement of Earthing complete with galvanised steel earth electrode 60Cm x 60Cm x 6 mm thick directly burried in ground ( eath pit not less than 2.25 M deep below the normal ground level conneceted to galvanised earth lead wire 4 mm dia by mens of bolts, nuts, check nuts and washers of galvanised iron steel including necessery excavation earth work PCC chamber CI chamber cover protection pipe watering pipe etc. (Complete all as shown in electrical plate No 3 and conected to earthing test point complete including excavation earthwork, PCC chamber, chamber cover ,funnel watering and protection pipe etc all specified and directed. 7 Each
164 164 Refixing of Switch 5/15 A retrieved from item ser No -120 all as specified and directed 50 Each
165 165 Refixing of seviceable Tube lights retrived item ser No -120 all as specified and directed 300 Each
166 166 Supply only LED indoor decorative aluminium extruded T5 lED batted integrated type tube light fitting, suitable and including 1x12W, 230V, bipin holders, connector block etc complete with all accessories internally prewired and including connected up with twin core twisted flexible copper conductor cable with suitable sizes all as specified and directed 350 Each
167 167 Supply only LED indoor decorative aluminium extruded T5 lED batted integrated type tube light fitting, suitable and including 1x22W, 230V, bipin holders, connector block etc complete with all accessories internally prewired and including connected up with twin core twisted flexible copper conductor cable with suitable sizes all as specified and directed. 250 Each
168 168 Shifting of electric energy meter from existing inside bldg to outside bldg with complete all accessories cable, MCB etc and good finishing to disturb area complete as specified and directed Note :- MCB, Meter etc shall be measured separately. 60 Each Job
169 169 Supply and fixing SMC meter Box, single phase with MCB and with viewing window for MCB, weather proof, shock proof complete of size 430x 215 x 150/120 MM Make Sintex GSMB-4422 all as specified and directed. 60 Each
170 170 Disconnecting the incoming and out going cable connection and dismantling the unserviceable meters and meter board and removing from site for further disposal. Design fabricating supplying and fixing indoor type vermin and weatherproof totally enclosed cubical type front operated, sufficient ventilation on sides cubicle type fabricated out of 2mm thick CRCA sheet duly painted epoxy powder coated Siemens grey colour and with industrial type built in locking arrangement. The panel shall be factory made from a reputed panel fabricators (CPRI approved manufacturers). The panel shall be wall mounting type and to be fixed on wall with all necessary fixing arrangements complete. The panel to be prewired with PVC insulated copper conductors for monitors and heat shrinkable PVC insulated copper strips of appropriate current carrying capacity for connecting the incoming and out going MCCB and MCBs Make of Panel :- Legrand/Schneider/CG. Note : unsv meter shall be deposited to mes store yard. All the control gears and electric meter to be provided in separate compartments with view glass and cable alleys busbar chambers etc to be provided in separate compartments and cable alleys busbar chambers etc to be provided with sufficient spacing . The following shall be provided :- \n(a) Copper busbar 200 Amps for phases and neutral duly sleeved with heat shrinkable insulation using colour code for R Y B &N set of 4- 01 Set.(b) MCCB 4 Pole, 415 V, 100 Amps with breaking capacity 25 KA, fixed type - 01 No (incomer)(c) Fixing the existing electric energy meters - 09 Nos obtained from the existing panel of respective Qtrs (d) MCB SPN 32 Amps 240 V “C” series 09 Nos (out going ) (e) Indicator lamp RYB, LED type complete -01 set (f) multifunction panel meters 3 phase, 4W IPM 240 V (L-N) 5 Amps panel mounted digital type meter of size 96mm x 96mmNote :- item ser No 118 to 176 (a) The contractor will be alloted complaint on daily basis and sufficient resources will be deployed by him/her for completion of day to day complaint within 24 Hrs from the time of reporting. Any delay beyond above mentioned time limit suitable penelities as mentioned inrelavant clause of contract (b) A detailed log of complaints with completion/non-completion remarks from user/MES will be maintained by the contractor and same will be updated on daily basis in consulation with Engr-in-charge or JE detailed by him (c) The contractor will make suitable arrangement for emergent complaints and will notify auth rep/Engr-in-charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond state time limit set for disposal of complaint. In case of any dispute the decision of accepting officer will be final and binding in this regard (d) The contractor will intimate MES authority well in advance if electric shutdown is required during rectification of complaints.\n(e) The quoted rated deems to be inclusive of transporation and expenses required for the resource deployment at the complaint (f) The contractor will maintain suitable inventories and range of spares required to meet the complaints as same will be reviewed peridically by Engr-in-charge to steamline complaints disposal system. 3 Each Job
171 171 Disconnecting the incoming and out going cable connection and dismantling the unserviceable meters and meter board and removing from site for further disposal. Design fabricating supplying and fixing indoor type vermin and weatherproof totally enclosed cubical type front operated, sufficient ventilation on sides cubicle type fabricated out of 2mm thick CRCA sheet duly painted epoxy powder coated Siemens grey colour and with industrial type built in locking arrangement. The panel shall be factory made from a reputed panel fabricators (CPRI approved manufacturers). The panel shall be wall mounting type and to be fixed on wall with all necessary fixing arrangements complete. The panel to be prewired with PVC insulated copper conductors for monitors and heat shrinkable PVC insulated copper strips of appropriate current carrying capacity for connecting the incoming and out going MCCB and MCBs Make of Panel :- Legrand/Schneider/CG. Note : unsv meter shall be deposited to mes store yard. All the control gears and electric meter to be provided in separate compartments with view glass and cable alleys busbar chambers etc to be provided in separate compartments and cable alleys busbar chambers etc to be provided with sufficient spacing . The following shall be provided :- \n(a) Copper busbar 200 Amps for phases and neutral duly sleeved with heat shrinkable insulation using colour code for R Y B &N set of 4- 01 Set.(b) MCCB 4 Pole, 415 V, 100 Amps with breaking capacity 25 KA, fixed type - 01 No (incomer)(c) Fixing the existing electric energy meters - 09 Nos obtained from the existing panel of respective Qtrs (d) MCB SPN 32 Amps 240 V “C” series 09 Nos (out going ) (e) Indicator lamp RYB, LED type complete -01 set (f) multifunction panel meters 3 phase, 4W IPM 240 V (L-N) 5 Amps panel mounted digital type meter of size 96mm x 96mmNote :- item ser No 118 to 176 (a) The contractor will be alloted complaint on daily basis and sufficient resources will be deployed by him/her for completion of day to day complaint within 24 Hrs from the time of reporting. Any delay beyond above mentioned time limit suitable penelities as mentioned inrelavant clause of contract (b) A detailed log of complaints with completion/non-completion remarks from user/MES will be maintained by the contractor and same will be updated on daily basis in consulation with Engr-in-charge or JE detailed by him (c) The contractor will make suitable arrangement for emergent complaints and will notify auth rep/Engr-in-charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond state time limit set for disposal of complaint. In case of any dispute the decision of accepting officer will be final and binding in this regard (d) The contractor will intimate MES authority well in advance if electric shutdown is required during rectification of complaints.\n(e) The quoted rated deems to be inclusive of transporation and expenses required for the resource deployment at the complaint (f) The contractor will maintain suitable inventories and range of spares required to meet the complaints as same will be reviewed peridically by Engr-in-charge to steamline complaints disposal system. 3 Each Job
172 172 Disconnecting the incoming and out going cable connection and dismantling the unserviceable MCB/MCCBs DBS and removing from site for further disposal. Design fabricating supplying and fixing indoor type vermin and weatherproof totally enclosed cubical type front operated, sufficient ventilation on sides cubicle type fabricated out of 2mm thick CRCA sheet duly painted epoxy powder coated Siemens grey colour and with industrial type built in locking arrangement. The panel shall be wall mounting type and to be fixed on wall with all necessary fixing arrangements complete. The panel to be prewired with PVC insulated copper conductors for monitors and heat shrinkable PVC insulated copper strips of appropriate current carrying capacity for connecting the incoming and out going MCCB and MCBs. Make of Panel :- Legrand/Schneider Note : - The following shall be provided :- \n(a) Aluminium busbar 400 Amps for phases and neutral duly sleeved with heat shrinkable insulation using colour code for R Y B & N set of 4- 01 Set. (b) MCCB 4 Pole, 415 V, 100 Amps with breaking capacity 16KA, fixed type - 01 No (incomer) (c) MCCB 4 Pole, 415 V, 63 Amps with breaking capacity 16 KA, fixed type - 04 No (Out Going) (e) Indicator lamp RYB, LED type complete -01 set (f) multifunction panel meters 3 phase, 4W IPM 240 V (L-N) 5 Amps panel mounted digital type meter of size 96mm x 96mm 1 Each Job
173 173 Deduct Credit for Demolished/ Dismantled material Rs. (-) 70530.00 (Minus) as listed in Schedule of Credit Note: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail