}

Repair To Roof , Ceiling , Joinery , Plastering And Other Br Repair In Md Jco And Or Accn In Ibgh Area Under Age Br Ii At Ge West Bareilly, GE WEST BAREILLY-Uttar Pradesh

Military Engineer Services-MES has published Repair To Roof , Ceiling , Joinery , Plastering And Other Br Repair In Md Jco And Or Accn In Ibgh Area Under Age Br Ii At Ge West Bareilly. Submission Date for this Tender is 16-02-2021. Shed Construction Tenders in GE WEST BAREILLY Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

26733065
Repair To Roof , Ceiling , Joinery , Plastering And Other Br Repair In Md Jco And Or Accn In Ibgh Area Under Age Br Ii At Ge West Bareilly
Open Tender
Indian
Uttar Pradesh
GE WEST BAREILLY
16-02-2021

Tender Details

Repair To Roof , Ceiling , Joinery , Plastering And Other Br Repair In Md Jco And Or Accn In Ibgh Area Under Age Br Ii At Ge West Bareilly

Key Value

Document Fees
INR 500 /-
EMD
INR 90000.0 /-
Tender Value
Refer document

BOQ Items

Name of work :- Repair to roof , ceiling , Joinery , Plastering and other B/R repair in Md JCO /OR accn in IBGH area under AGE B/R -II at GE West bareilly
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed 25 Cum
2 2 Brick work with fly ash bricks, straight or curved on plan 6m mean radious built in CM (1:6) etc as directed . 25 Cum
3 3 Demolition of cement concrete (un-reinforced) including terrazo of any description and in any position not otherwise specifically provided for complete all as specified and directed. 35 Cum
4 4 Dismantling floor, hearth or wall tiling/terrazo including cement mortar bedding and removing rubbish off the premises complete all as specified and directed. 1000 Sqm
5 5 Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed. 30 10 Sqm
6 6 Demolition/Dismantling of breaking up drain pipes( AC or reinforced concrete )set in cement mortar for 100mm internal dia (and less) of pipes. 200 RM
7 7 Dismantling of asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings 500 Sqm
8 8 Dismantling timber scantling 40 Sqcm and over in sectionand in any position in unframed work. 0.5 CUM
9 9 Removal of existing treatment and wire brushing and cleaning top surface of tiles and roofs to preparation of surface for applying in primer and bitumen. 700 Sqm
10 10 Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets. 300 Sqm
11 11 Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n. exc 1.5 sqm incl removing from the premises complete all as spd and directed 78 Each
12 12 Taking down shutter of any description exc 1 sqm and n/exc 2 sqm each incl removing from the premises complete all as spd and directed 49 Each
13 13 Dismantling water tanks exc 250 & n exc 500 ltr removing to store 25 Each
14 14 M&L PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in, levelling course with to be finished even and fair without using extra cement on roof surface / chajja (thickness of concrete will be provided as per site requirement and as directed by engr-in-charge) complete all as specified and directed. 40 Cum
15 15 M&L for 15mm thick screeding on fair faces of concrete surfaces in CM 1:4 with water proofing compound @ 200ml per 50 Kg of cement complete all as specified and directed.(NOTE:- WPC shall be measured and paid separatly), finished even and smooth with steel trowel without using extra cement. 400 Sqm
16 16 Supply only liquid water proofing compound (Make :Dr fixit) 15 Ltr
17 17 Supply & providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and described as under:-\n(a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacturer's specification complete all as specified and directed.\n(b) Supply & providing water proofing treatment with polymeric proofing membrane of 3Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100micron HMHDPE film centre core including coating the surface with the bitumen 85/25 @ 1.20 Kg/Sqm and torch application of membrane with 10cm overlaps and longitudinal edges 15 cm at the ends as required thereof, complete all as specified & directed. 400 Sqm
18 18 M&L Aluminium paint one coat on APP membrane complete all as specified and directed. 400 Sqm
19 19 M&L 250 x 250 x 15-18 mm thick PCC tiles fixed with neat cement slurry and joint filled with sealing compound over and including 20 mm thick screed bed in cement 1:4 incl demo of old tiles and existing water proofing treatment complete all as specified and directed.\n 300 Sqm
20 20 M&L for glazed coloured ceramic tiles 300 x 200mm x 7mm thick in vertical wall surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles complete all as specified and directed. 300 Sqm
21 21 M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square/rectingular)area of each tiles exceeding 0.11 Sqm (400 x 400mm) but not exceeding 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 700 Sqm
22 22 M&L for Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed 300 Sqm
23 23 M&L for 75 mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection ,path,finished even and smooth without using extra cement complete all as specified and directed. 200 Sqm
24 24 M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub-basc etc all as specified and directed. 40 CUM
25 25 M&L for screed bed or bedding layer of cement mortar 15mm thick in CM (1:6) for laying floor finishes complete all as specified and directed 300 Sqm
26 26 M& L for providing precast cement concrete rubber moulded chequered coloured tiles 20 to 25 mm thick even finished on top of approved design and pattern complete all as specified and directed 300 Sqm
27 27 M& L for providing precast cement concrete rubber moulded coloured interlocking tiles 60 mm thick with grey cement and pigment of approved design and pattern laid over a layer of 25 mm thick sand cushion including filling the joint with sand complete all as specified and directed 500 Sqm
28 28 S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltrs including dismantling of existing unserviceable water tank capacity exceeding 250 ltr and not exceeding 500 ltr complete all as specified in SSR Part I and directed 25 Each
29 29 S&F 16 to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like etc complete all as specified and directed 25 Sqm
30 30 Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed 40 RM
31 31 S&F in repairs 25 mm dia MS fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed. 220 RM
32 32 M&L rendering 10mm thick in CM 1:6 on brick or concrete surfaces and finished even and smooth w/o using extra cement including taking down existing defective cement plaster on brick or stone masonary complete all as specified and directed. 400 Sqm
33 33 M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:4) including finishing the surface even and fair and including taking down existing defective cement plaster on brick or stone masonary complete all as specified and directed. 200 Sqm
34 34 M&L preparation of newly plastered surfaces and applying two coats of cement base paint on walls all as specified & directed by Engr-in-Charge. 200 Sqm
35 35 M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed 400 Sqm
36 36 S & F in repairs GI wire mesh 0.48 mm nominal dia of wire and average width of aperature 1.4mm and fixed with tinned takes or galvanised Wire staples complete all as specified and directed 150 Sqm
37 37 Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed 120 Sqm
38 38 S&F 15mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed. 100 RM
39 39 S&F 20 mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed. 50 RM
40 40 S&F in repairs vitreous china Orissa pattern IWC size 580x440mm white with integral foot rest complete including trap. 20 Each
41 41 S & F in repairs PVC low level flushing cistern of capacity 10 ltrs with inlet, ball valve, float and handle including brackets and flush pipe of PVC 32mm dia complete all as specified and directed. 20 Each
42 42 S&F in repairs Vitreous china wash basin white flat back 550mm x 400mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed 40 Each
43 43 S&F in repairs chromium plated fancy type stop vlave /angle valves with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed. 50 Each
44 44 S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed. 50 Each
45 45 S&F in repairs 100 mm dia shower rose of Chromium plated brass for fixing 15 mm pipe with shower arm size 195 mm long with bend of 45 degree with flange complete all as specified and directed. 35 Each
46 46 S&F in repairs PVC connections 15mm dia & 450mm long with PTMT nuts complete all as specified and directed. 60 Each
47 47 S&F in repairs plate rack made out of 1 mm thick stainless steel sheet of size 75 cm x 90 cm x 25 cm with all internal fittings (as per sample) complete all as specified and directed 10 Each
48 48 S&F PVC (SWR) pipes 110mm dia, single socketed in any length fixed to walls & floor ,jointed with solvent cement. 200 RM
49 49 Cutting holes into bricks walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1as required, depth of hold fast exceeding half brick and not exceeding one brick all as spd and directed 200 Each
50 50 S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if required, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 all as spd and directed 40 Kg
51 51 M&L providing "RAJSHRI" BRAND FACTORY MADE PVC INTERNAL DOOR FRAME (PRELAM) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm ) made out of extruded 5 mm (+- 0.25 mm ) thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos Heat bent PVC sheet sections. the inside section of size 90x30 mm shall be made from plain colour PVC sheet of 5 mm (+-0.25 mm ) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25) thick plain PVC sheet The frame shall be mitre cut at two corners and joined with 4 nos of 150 mm long brackets of 15 mm x 15 mm MS square tube The two vertical door frames are to be reinforced with 40 mm x 20 mm MS tubes of 19 guage through out the farme The door frame shall be fixed to the wall using 8/100 mm long screw through the frame by using anchor fastners. A minimum of 4 nos screw to be provided for each vertical members and minimum 2 nos for horizontal member etc complete as per manufacturers specifications and directions of engineers-in-charge 235 RM
52 52 M&L in providing 30 mm thick RAJSRI brand factory made internal PVC flush door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/prelam PVC sheet manufactured by an ISO-9001-2008 certified company on both side of the inside panel All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2 nOs PVC sheet of 5 mm ( +0.25 mm ) thickness using PVC solvent cement adhesive Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20 mm thick ( 5mm x 4 mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm * 25 mm * 25 mm and 50 mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25 mm * 8mm size steel screws etc complete as per direction of engineer-in-charge, manufacturers specification and drawing 70 Sqm
53 53 S&F 35mm thick 2nd class hard wood shutter for door glazed and skelton shutter open rebated and prepare to receive glass, gauge etc for window/ventilators divided into squares with plain chamfered mitred & rebated sash bars edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc sizes of member as spd in SSR Part I sec 8 clause 8.24 (b) all as spd and directed 30 Sqm
54 54 S&F factory made 30mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed. 60 Sqm
55 55 S&F Factory made steel window /ventilator side hung shutters including box type hinges with Z section steel handle, 2 Nos 100mm MS tower bolt on each shutter and MS CP hook and eye stay, complete with glazing bars dovetailed or welded all as spd and directed. 28.8 Sqm
56 56 S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks and similar work confirming to Fe -290 Gde-E-165 all as spd and directed . 500 Kg
57 57 S&F factory made PVC Cupboard frame of the size 75mm x 40mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2nos. of screws to be provided horizontal member etc. complete as per direction of Engr-in-Charge, manufacturer's specification and drawing. 40 RM
58 58 S&F factory made PVC cupboard flush type shutter of 30mm thick consisting of frame made out M S tubes of 19 gauge thickness and size 19mm x 19mm for stiles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/ cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both side of inside panel incliding necessary items to fix the shuter to frame such as 100mm stailess steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutter.All four edges of the panel to be sealed with lipping of 10mm thick and 20mm wide PVC sheet baton (made by sticking 2nos. PVC foam sheet of 5mm thickness using PVC solvent cement adhesive). complete as per direction of Engr-in-Charge. 16 Sqm
59 59 S&F 14 to 16 mm th green marble stone slabs machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade fixed as in steps jams ,pillars ,window,cupboards selfs, cills cooking platforms & the like etc all as specified and directed by Engr-in-Charge 28 Sqm
60 60 S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as spd and directed 20 Each
61 61 S&f in repair floor door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring, 140mm long complete all as spd and directed. 40 Each
62 62 S&F in repairs cast iron body door closer hydrocally regulated designation No. 1 universal type for door shutters up to 700 mm in width and of weight not more than 35Kg and fixed all as spd and directed 5 Each
63 63 S&F 100mm long stainless steel but hinges 330 Each
64 64 S&F 150mm size extruded aluminium alloy handle fabricated type anodised complete all as specified and directed. 100 Each
65 65 S&F 125mm size mild steel pressed handles oval type stove enamelled black all as spd and directed 120 Each
66 66 S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. 160 Each
67 67 S&F 300mm long mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as spd and directed 40 Each
68 68 M&L for preparation of new wooden surfaces of any description and applying two coat of synthetic enamel paintover one coat of pink primer complete all as spd and directed by Engr-in-Charge 100 Sqm
69 69 M&L for painting to steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface all as spd and directed 70 Sqm
70 70 S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc 1000 Kg
71 71 M&L for 4mm thick E-Board classic (everest or equivalent) tiles for insulation and accoustic purpose 60cm x 60cm with and including powder coated galvanised iron snap grid with 32x25x1.5mm thick Tee section and 32x25x1.5mm thick algle section with all hanging/supporting arrangements as in false ceiling and making good disturbed surface complete all as specified and directed.complete all as specified and directed.\n 300 Sqm
72 72 M&L for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts 500 Sqm
73 73 Ditto but fixing only. 200 Sqm
74 74 S&Fin repair 6mm thick asbestos cement two piece serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J- Type or cranked hooks bolts all as spd and directed 90 RM
75 75 Notes : \n
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail