}

Shed For Engine At Kamorta Providing Shed For Engine Alternator Of Cable Landing Station At Kamorta . , KAMORTA-Andaman And Nicobar Islands

Bharat Sanchar Nigam Limited-BSNL has published Shed For Engine At Kamorta Providing Shed For Engine Alternator Of Cable Landing Station At Kamorta . . Submission Date for this Tender is 08-02-2021. Shed Construction Tenders in KAMORTA Andaman And Nicobar Islands. Bidders can get complete Tender details and download the document.




Tender Notice

26731546
Shed For Engine At Kamorta Providing Shed For Engine Alternator Of Cable Landing Station At Kamorta .
Open Tender
Indian
Andaman And Nicobar Islands
KAMORTA
08-02-2021

Tender Details

Shed For Engine At Kamorta Providing Shed For Engine Alternator Of Cable Landing Station At Kamorta .

Key Value

Document Fees
INR 590 /-
EMD
INR 7500.0 /-
Tender Value
Refer document

BOQ Items

Name of the work : Providing Shed for Engine Alternator of Cable Landing Station at Kamorta.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge.
2 1.1 All kinds of soil 6.35 cum
3 2 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 6.35 cum
4 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
5 3.1 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size) . (Fine aggregate shall be crushed stone sand and not river sand) 2.5 cum
6 3.2 1:4:8 (1 Cement : 4 coarse sand(zone-III) : 8 graded stone aggregate 40 mm nominal size). . (Fine aggregate shall be crushed stone sand and not river sand) 1.4 Cum
7 4 Providing and fixing up to floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete :. (Fine aggregate shall be crushed stone sand and not river sand)
8 4.1 1:3:6(1 Cement : 3 coarse sand (zone III): 6 Graded stone aggregate 10/12.5mm nominal size) . (Fine aggregate shall be crushed stone sand and not river sand) 4.05 cum
9 5 Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
10 5.1 Hot finished welded type tubes. 1442.28 kg
11 6 Providing and fixing wind ties of 40x 6 mm flat steel section. 62 m
12 7 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( + 0.05 %), total coated thickness with zinc coating 120 gm per sqm as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 58.89 sqm
13 8 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 gm per sqm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
14 8.1 Ridges plain (500 - 600mm). 15.5 m
15 9 12 mm cement plaster of mix :
16 9.1 1:4 (1 cement: 4 fine sand) 19.75 Sqm
17 10 Finishing walls with Acrylic Smooth exterior paint of required shade :
18 10.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). 19.75 Sqm
19 11 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
20 11.1 Two or more coats on new work. 40.8 Sqm
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail