}

Maintenance Of Various Sports Complexes / Golf Courses ( A/R And M/O Of Works At Baba Gangnath Sports Complex For The Year 2020-21 ) . General Repair Work , Water Proofing Sanitary Fitting , White Wash And Painting And Other Misc . Civil Works In Th, Executive Engineer/Sports Division-1/DDA-Delhi

Delhi Development Authority-DDA has published Maintenance Of Various Sports Complexes / Golf Courses ( A/R And M/O Of Works At Baba Gangnath Sports Complex For The Year 2020-21 ) . General Repair Work , Water Proofing Sanitary Fitting , White Wash And Painting And Other Misc . Civil Works In Th. Submission Date for this Tender is 01-02-2021. Water Proofing Work Tenders in Executive Engineer/Sports Division-1/DDA Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

26731054
Maintenance Of Various Sports Complexes / Golf Courses ( A/R And M/O Of Works At Baba Gangnath Sports Complex For The Year 2020-21 ) . General Repair Work , Water Proofing Sanitary Fitting , White Wash And Painting And Other Misc . Civil Works In Th
Open Tender
Indian
Delhi
Executive Engineer/Sports Division-1/DDA
01-02-2021

Tender Details

Maintenance Of Various Sports Complexes / Golf Courses ( A/R And M/O Of Works At Baba Gangnath Sports Complex For The Year 2020-21 ) . General Repair Work , Water Proofing Sanitary Fitting , White Wash And Painting And Other Misc . Civil Works In The Gymnasium And Swimming Pool At Baba Gangnath Sports Complex .

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document

BOQ Items

Name of Work: Maintenance of various Sports Complexes / Golf Courses (A/R & M/O of works at Baba Gangnath Sports Complex for the year 2020-21). SH: General repair work, water proofing sanitary fitting, white wash & painting and other misc. civil works in the gymnasium and swimming pool at Baba Gangnath Sports Complex. Estimated Cost : Rs. 6,94,509/-
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.\n BI01010001010000000000000515BI0100001113 131 Sqm
2 2 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. BI01010001010000000000000515BI0100001114 131 Sqm
3 3 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. BI01010001010000000000000515BI0100001115 2 Each
4 4 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. A) For thickness of tiles 10 mm to 25 mm BI01010001010000000000000515BI0100001116 20 Sqm
5 5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. \n a) 15 mm nominal outer dia Pipes \n BI01010001010000000000000515BI0100001117 10 Mtr
6 6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall a) 15 mm nominal outer dia Pipes BI01010001010000000000000515BI0100001118 10 Mtr
7 7 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. BI01010001010000000000000515BI0100001119 5 Sqm
8 8 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete BI01010001010000000000000515BI0100001120 15 Sqm
9 9 Providing and fixing white vitreous china water closet squatting pan (Indian type) a) Orissa pattern W.C. pan of size 580x440 mm BI01010001010000000000000515BI0100001121 1 Nos
10 10 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : \na) W.C. pan with ISI marked white solid plastic seat and lid\n BI01010001010000000000000515BI0100001122 1 Nos
11 11 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. a) 15 mm nominal bore BI01010001010000000000000515BI0100001123 3 Nos
12 12 Providing and fixing jaguar/hind ware health faucet long flexible tube (silver) with fitting and fixtures complete as per direction of Engineer-in-charge. BI01010001010000000000000515BI0100001124 1 Nos
13 13 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931\n a) 15 mm nominal bore\n BI01010001010000000000000515BI0100001125 4 Nos
14 14 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-\n(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer\n BI01010001010000000000000515BI0100001126 2 Nos
15 15 Providing and fixing plasticized PVC connection pipe with brass unions. \na)45 cm length-15 mm nominal bore\n BI01010001010000000000000515BI0100001127 4 Nos
16 16 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. BI01010001010000000000000515BI0100001128 10 Nos
17 17 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively BI01010001010000000000000515BI0100001129 2 Nos
18 18 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion a) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) BI01010001010000000000000515BI0100001130 27 Kg
19 19 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) BI01010001010000000000000515BI0100001131 30 Kg
20 20 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): a) With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) BI01010001010000000000000515BI0100001132 6 Sqm
21 21 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : a) 250x10 mm BI01010001010000000000000515BI0100001133 3 Nos
22 22 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.\n a) With stainless steel cover plate minimum 1.25 mm thickness\n BI01010001010000000000000515BI0100001134 5 Nos
23 23 Providing and laying APP (Ataxic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 liter/ sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane :\nA) 3 mm thick\n BI01010001010000000000000515BI0100001135 34 Sqm
24 24 Extra for covering top of membrane with Geotextile, 120 gsm non-woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation BI01010001010000000000000515BI0100001136 34 Sqm
25 25 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:\na) One or more coats on old work\n BI01010001010000000000000515BI0100001137 397 Sqm
26 26 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :\na] One or more coats on old work \n BI01010001010000000000000515BI0100001138 17 Sqm
27 27 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) BI01010001010000000000000515BI0100001139 2 Cum
28 28 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. BI01010001010000000000000515BI0100001248 1071 Sqm
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail