Providing And Fixing Proper Lighting Alongwith All Electric Equipments/ Accessories In Open Area , Guard Room And Toilet Cum Bathroom In Centralized Malkhana , Dheerpur , North District , Delhi-1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group B 2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 4 Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. a) 5/6 amps switch 5 15/16 A switch 6 3 pin 5/6 A socket outlet 7 6 pin 15/16 A socket outlet 8 Fan regulator 2M 9 Supplying, installation, testing & commissioning of following light fixtures complete with all accessories, directly on surface/wall/ceiling/in recess including cutting ceiling/false ceiling if required, making connections with 3 core 1.5 sq.mm FRLS PVC insulated, copper conductor, armoured cable from existing point i/c saddling and tapping for cable . including providing and fixing suspension for fixtures as per requirement complete as reqd.at site with following minimum parameters:: (1) PF shall not be less than 0.9. (2) THD shall be less than 10% (3) CRI > 80 (4)Driver efficiency > 85%, 10 KV surge protection, L-70 Life 50,000 burning hours (make of LED used shall be NICHIA/OSRAM/SEOUL /HAVELLS/PHILIPS/CREE) na) 1200mm LED luminaire made of extruded Polycarbonate housing. with efficacy 100 Lumens/watt or better having lumens output 2000 or better 10 600mm LED luminaire made of extruded Polycarbonate housing. with efficacy 100 Lumens/watt or better having lumens output 980 or better 11 35-40 Watt LED Post Top Lantern fitting made out of Aluminium body, confirming to IP - 66, suitable for operation on 150 V to 270 V,(5500 to 6500K), 50 Hz AC Supply, i/c 1 mtr length suitable size Gi pipe i/c bending, clamping etc for fixing it. 12 45-48 Watt LED street light fitting made out of Aluminium body, confirming to IP - 66, suitable for operation on 150 V to 270 V,(5500 to 6500K), 50 Hz AC Supply, 13 150 Watt LED flood light fitting made out of Aluminium body, confirming to IP - 66, suitable for operation on 150 V to 270 V,(5500 to 6500K), 50 Hz AC Supply, 14 Supplying , installation testing and commissioning of 1400 mm sweep AC ceiling fans along with 3 x 1.5 sqmm FRLS copper wiring upto 30 cm downroad etc complete in all respect without regulator including connection etc as required 15 Supply, installation,testing and commissioning of following sizes heavy duty exhaust fan, 1 phase, 230v 900 RPM in the existing/making opening ,i/c supplying and fixing of suitable gravity louvers from outside including making the connection , testing etc as required, a) a)300 mm 16 Provision for Supplying laying and fixing of one number PVC insulated and PVC sheathed / XLPE aluminium power cable of 1.1 kV grade of following size on existing DWC Pipe etc as required. i) 3.5 x 35 sqmm 17 3.5 x 25 sqmm 18 3 x 10 sqmm 19 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. a) 63 mm dia (OD-63 mm & ID-51 mm nominal) 20 Supplying, installation, testing and commissioning of outdoor Cubical type feeder pillar panel floor mounted modular,sectionalised, compartmentalized, front and rear openable double door with double lock and key arrangement having 25 MVA breaking capacity of suitable size fabricated from CRCA sheet steel of 2 mm thick for frame work, enclosure and doors 3 mm thick for gland plates with stiffeners wherever required, 300mm deep, duly powder coated and painted complete with 4 strip aluminium bus bars of 315 amp rating complete with connections, interconnections internal wiring along with connection wiring from Main bus bar to MCCB with copper cable of 16 sqmm sizes, earthing complete i/c providing suitable angle iron frame with 30cm legs ground in suitable foundation etc as required.(The board shall be dust & vermin proof with degree of protection of IP 42 as per IS : 12063, free standing type, mounted on base channel of MS Section not less than 100 mm X 50 mm X 5 mm). 21 Providing and fixing following switch gears thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, and accessories etc. as required. a) 250 A, 50kA, FPMCCB 22 100 A, 30kA, FPMCCB 23 20 Amp , Single Pole 24 63 Amp, Double pole 25 RYB Indication lamps with HRC control fuses with fuse fitting 26 Multifunctional Meter along with selector switches 27 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 amps & 5/6 amp modular socket outlet and 15/16 amps modular switch, connection, painting etc as required. 28 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required. 29 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 2+16 way, Double Door 30 Supplying and fixing 5 amps to 32 amps rating 240 volts C curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections , testing and commissioning etc. as required. a) Single pole 31 Supplying & fixing following rating, double pole, 240 volts, MCB in the existing MCB DB complete with connections ,testing and commissioning etc as required. a) 100 amps 32 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 33 Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 34 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 35 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 36 Providing and fixing 6 SWG dia G.I. wire on surface or in recess or in existing DWC pipe for loop earthing as required. 37 SITC of 16 meter Round Galvanized Iron Himast Pole with top and bottom dia of 150MM and 360mm respectively , having 2 (3*3 mm) sections along with M24 Foundation Bolt,Anchor Plate and Common Plate, Motor of 0.75 HP Wire Rope of 5 mm thickness(min.), PCB 445 mm suitable for fixing minimum 8 LED lights fixtures i/c interconnection between fitting and MCB with 3 X 4 sqmm PVC insulated FRLS copper conductor cable etc complete RCC foundation of size not less than 0.60 mtr x 0.60 mtr x 1.2 mtrs. duly reinforced with 1:2:4 CC (1 cement:2coarse sand :4 graded stone aggregate 20 mm nominal size), 4 Nos steel foundation bolts & nuts of minimum 18mm dia x 600mm long including providing 40mm dia B class GI pipe sleeve 1.00 mtr. length with necessary bending in the RCC foundation for cable entry etc. as required. 38 Supplying ,Installation , Testing and commissioning of 10.0 mtr. height Octagonal GI pole along with 1mtr long brackets including MCB ,Connector and interconnection between fitting and MCB with 3 X 1.5 sqmm PVC insulated FRLS copper conductor cable etc complete RCC foundation of size not less than 0.40 mtr x 0.40 mtr x 1.0 mtrs. duly reinforced with 1:2:4 CC (1 cement:2coarse sand :4 graded stone aggregate 20 mm nominal size), 4 Nos steel foundation bolts & nuts of minimum 13mm dia x 450mm long including providing 40mm dia B class GI pipe sleeve 1.00 mtr. length with necessary bending in the RCC foundation for cable entry etc. as required.
