Pec University Of Technology has published Additional/Alteration And Renovation Of Office Of Hod And Seminar Room Of Production Engg . Dept . . Submission Date for this Tender is 02-02-2021. Building Repair Tenders in Punhab Engineering College Chandigarh. Bidders can get complete Tender details and download the document.
| Name of Work: Additional/Alteration and renovation of office of HOD and Seminar Room of Production Engg. Dept. at Punjab Engineering College Sector-12, Chandigarh | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | REINFORCED CEMENT CONCRETE | BI01010001010000000000000515BI0100001112 | ||
| 2 | 2 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | BI01010001010000000000000515BI0100001113 | 0.07 | cum |
| 3 | 3 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. | BI01010001010000000000000515BI0100001114 | ||
| 4 | 4 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | BI01010001010000000000000515BI0100001115 | 7.88 | kg |
| 5 | 5 | MASONRY WORK | BI01010001010000000000000515BI0100001116 | ||
| 6 | 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : | BI01010001010000000000000515BI0100001117 | ||
| 7 | 7 | Cement mortar 1:4 (1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001118 | 0.64 | cum |
| 8 | 8 | FLOORING | BI01010001010000000000000515BI0100001119 | ||
| 9 | 9 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.\n(Correction slip no 4 DSR 2018 as per memorandum DG/DSR/36 dated 26.07.2019) | |||
| 10 | 10 | Double charge vitrified tile polished finish of size | |||
| 11 | 11 | Size of Tile 600 x 600 mm | 55.74 | sqm | |
| 12 | 12 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. | |||
| 13 | 13 | Size of Tile 600x600 mm | 3.09 | sqm | |
| 14 | 14 | FINISHING | |||
| 15 | 15 | 20 mm cement plaster of mix : | |||
| 16 | 16 | 1:4 (1 cement: 4 coarse sand) | 32.81 | sqm | |
| 17 | 17 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. | |||
| 18 | 18 | Two coats | 210.79 | sqm | |
| 19 | 19 | REPAIRS TO BUILDING | |||
| 20 | 20 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. | 55.74 | sqm | |
| 21 | 21 | DISMANTLING AND DEMOLISHING | |||
| 22 | 22 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | |||
| 23 | 23 | In cement mortar | 3.14 | cum | |
| 24 | 24 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : | |||
| 25 | 25 | Thickness above 25 mm up to 40 mm | 36.23 | sqm | |
| 26 | 26 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 6.19 | sqm | |
| 27 | 27 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 4.13 | cum | |
| 28 | 28 | ALUMINIUM WORK | |||
| 29 | 29 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | |||
| 30 | 30 | For fixed portion | |||
| 31 | 31 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | 238.61 | kg | |
| 32 | 32 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. | |||
| 33 | 33 | Pre-laminated particle board with decorative lamination on both sides | 18.53 | sqm | |
| 34 | 34 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | |||
| 35 | 35 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | 20.62 | sqm | |
| 36 | 36 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. | |||
| 37 | 37 | With stainless steel cover plate minimum 1.25 mm thickness | 4 | each | |
| 38 | 38 | NEW TECHNOLOGIES AND MATERIALS | |||
| 39 | 39 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specifications 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secindary intermediate cross-T of size 24x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e 12x50 mm long dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. | |||
| 40 | 40 | With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. | 55.74 | sqm | |
| 41 | 41 | WOOD AND PVC WORK | |||
| 42 | 42 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | 4 | each | |
| 43 | 43 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : | |||
| 44 | 44 | 300x16 mm | 4 | each | |
| 45 | 45 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : | |||
| 46 | 46 | 250x10 mm | 4 | each | |
| 47 | 47 | 200x10 mm | 4 | each | |
| 48 | 48 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : | |||
| 49 | 49 | 125 mm | 8 | each | |
| 50 | 50 | WIRING | |||
| 51 | 51 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. | |||
| 52 | 52 | Group A | 15 | Point | |
| 53 | 53 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. | |||
| 54 | 54 | 3 x 2.5 sq. mm | 150 | Metre | |
| 55 | 55 | 3 x 4 sq. mm | 40 | Metre | |
| 56 | 56 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. | |||
| 57 | 57 | 25 mm | 75 | Metre | |
| 58 | 58 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. | |||
| 59 | 59 | 5/6 A switch | 50 | Each | |
| 60 | 60 | 15/16 A switch | 2 | Each | |
| 61 | 61 | 3 pin 5/6 A socket outlet | 28 | Each | |
| 62 | 62 | 6 pin 15/16 A socket outlet | 2 | Each | |
| 63 | 63 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | 6 | Each | |
| 64 | 64 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. | 10 | Each | |
| 65 | 65 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. | |||
| 66 | 66 | 8 Module (125mmX125mm) | 6 | Each | |
| 67 | 67 | 12 Module (200mmX150mm) | 6 | Each | |
| 68 | 68 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. | |||
| 69 | 69 | 8 Module | 6 | Each | |
| 70 | 70 | 12 Module | 6 | Each | |
| 71 | 71 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. | 3 | Each | |
| 72 | 72 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. | 2 | Each | |
| 73 | 73 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. | 8 | Each | |
| 74 | 74 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. | 3 | Each | |
| 75 | 75 | MCCB, MCB & DB'S | |||
| 76 | 76 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) | |||
| 77 | 77 | 12 way , Double door | 1 | Each | |
| 78 | 78 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. | |||
| 79 | 79 | Single pole | 10 | Each | |
| 80 | 80 | Double pole | 1 | Each | |
| 81 | 81 | Dismantling and relocating of existing main electrical central nitch ALL TPN, BDB, MCb's, wiring, connections testing commissioning of all switch gears including all petty material required such as copper wires, flexible pipe etc to exteded the wires upto new location of switch gears | 1 | Job | |
| 82 | 82 | Supply and erection of ceiling fan of make Crompton/ Havells/Usha/Orient of double ball bearing white colour | |||
| 83 | 83 | Size 56" (1400 mm) | 5 | Each | |
| 84 | 84 | Size 48" (1200 mm) | 1 | Each | |
| 85 | 85 | Supply and erection of LED panel sixe 2'x2' 30 watt, cool day light, 3000 lumens ± 10% colours 6000-6500K. Make Philips model RC 370B LED 305-6500 or its equivalent of WIPRO, Havells make.The fitting shall be installed in false ceiling in panels | 8 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
