}

Construction ( Renovation ) Of Modular Kitchen In Canteen Block , Pggcg , Sector 11 , Chandigarh, Chandigarh-Chandigarh

Chandigarh Administration Engineering Department has published Construction ( Renovation ) Of Modular Kitchen In Canteen Block , Pggcg , Sector 11 , Chandigarh. Submission Date for this Tender is 03-02-2021. Moduler Furniture Tenders in Chandigarh Chandigarh. Bidders can get complete Tender details and download the document.




Tender Notice

26725315
Construction ( Renovation ) Of Modular Kitchen In Canteen Block , Pggcg , Sector 11 , Chandigarh
Open Tender
Indian
Chandigarh
Chandigarh
03-02-2021

Tender Details

Construction ( Renovation ) Of Modular Kitchen In Canteen Block , Pggcg , Sector 11 , Chandigarh

Key Value

Document Fees
Refer document
EMD
INR 67800.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Construction (Renovation) of Modular Kitchen in Canteen Block, PGGCG Sector 11, Chandigarh.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 HOT BAIN MARIE (Size 60"x27"x34")\nProviding by supplying, fixing and placing in position complete, Hot Bain Marrie with top constructed of 16 gauge Stainless steel sheet (Gr. SS304) front turned down 2’ & in ½” rear & both sides & rear turned down 2” & flush with body cladding. Top shall be secured to 1-1/2”x1/8” thick Mild Steel welded work, Exterior/ interior cladding no 0.8mm Stainless steel sheet with 2“ thick . puff insulation, top of unit shall be provided glass sliding door with handle & locking arrangement. Internal temperature-20deg. To -24deg. to be matained. Unit provided one no. removable &adjustable Stainless steel welded wire helf on the Stainless steel clip, side channel supported adjustable hight. Right side of unit shall be provided 0.5 H.P. Low temperature type kirloskar compressor with louvered access panels, single phase, independent control, digital thermometer & electrical cord. Static cooling, bottom of internal tank shall be provided 1” dia drain outlet and removable perforated no. 0.8mm .S FLASE BOTTOM & BELLOW NO 0.8mm S.S DRIP TRAY With INTEGRAL HANDLE UNIT SHALL BE MOUNTED ON (4) NO.S 6” High 1-1/2”x1-1/2 s.s square pipe legs with adjustable bullet feet complete in all respects as per site and to the entire satisfaction of Engineer in charge. 1 each
2 2 CUTLERY TABLE THREE SIDE COVERED TWO DRAWER (Size 48"x27"x34"+6")\nProviding by supplying, fixing and placing in position complete, work table of size 44"x24"x34"+6" made of 16 gauge Stainless Steel of grade 304 duly 120 grit matt polished with all resulting edges rounded with no bur or other excess material left. Top will be turned down 2” and ½" underneath in channel shape on all exposed sides, in case of sink in top wherever mentioned the side shall be raised by ¾” on all exposed sides, where tables are placed against building walls, they will be turned up at back approximately 6” returned ¾” at 45 degree to wall with all exposed ends closed, argon are welded and smooth polish. The work table and undershelve sheet shall be placed on welded MS angle frame of size 35mmx35mmx5mm shall be primed and painted which will be welded with stainless steel square pipe/dia pipe of size 40mm supports/legs of table having adjustable nylon leveling feet at bottom and two tables shall have arrangements to make it as single table and including undershelves of size 44"x24"x12" constructed of 0.8mm, Stainless Steel sheeting of Stainless steel grade 304 uniformly matt polished with 12 grit and reinforced with 35mm x 35mm x 5mm MS angle frame welded with supports / legs at bottom to support undershelve. All shelves will be turned down 1½" and ½" underneath on all sides in channel shape with resulting corners cutout to fit counter of leg complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
3 3 WORK TABLE WITH UNDER SHELF COVERED FROM FRONT (Size 48"x32"x(34"+6")\nProviding by supplying, fixing and placing in position complete, work table of size 48"x32"x(34"+6") made of 16 gauge Stainless Steel of grade 304 duly 120 grit matt polished with all resulting edges rounded with no bur or other excess material left. Top will be turned down 2” and ½" underneath in channel shape on all exposed sides, in case of sink in top wherever mentioned the side shall be raised by ¾” on all exposed sides, where tables are placed against building walls, they will be turned up at back approximately 6” returned ¾” at 45 degree to wall with all exposed ends closed, argon are welded and smooth polish. The work table and undershelve sheet shall be placed on welded MS angle frame of size 35mmx35mmx5mm shall be primed and painted which will be welded with stainless steel square pipe/dia pipe of size 40mm supports/legs of table having adjustable nylon leveling feet at bottom and two tables shall have arrangements to make it as single table and including undershelves of size 36"x24"x(12"+6") constructed of 0.8mm, Stainless Steel sheeting of Stainless steel grade 304 uniformly matt polished with 12 grit and reinforced with 35mm x 35mm x 5mm MS angle frame welded with supports / legs at bottom to support undershelve. Cover from the front 16 gauge stainless steel. All shelves will be turned down 1½" and ½" underneath on all sides in channel shape with resulting corners cutout to fit counter of leg complete in all respect and to the entire satisfaction of Engineer in charge. 2 each
4 4 WORK TABLE WITH UNDER SHELF COVERED FROM FRONT (Size 72"x32"x(34"+6")\nProviding by supplying, fixing and placing in position complete, work table of size 72"x32"x(34"+6") made of 16 gauge Stainless Steel of grade 304 duly 120 grit matt polished with all resulting edges rounded with no bur or other excess material left. Top will be turned down 2” and ½" underneath in channel shape on all exposed sides, in case of sink in top wherever mentioned the side shall be raised by ¾” on all exposed sides, where tables are placed against building walls, they will be turned up at back approximately 6” returned ¾” at 45 degree to wall with all exposed ends closed, argon are welded and smooth polish. The work table and undershelve sheet shall be placed on welded MS angle frame of size 35mmx35mmx5mm shall be primed and painted which will be welded with stainless steel square pipe/dia pipe of size 40mm supports/legs of table having adjustable nylon leveling feet at bottom and two tables shall have arrangements to make it as single table and including undershelves of size 36"x24"x(12"+6") constructed of 0.8mm, Stainless Steel sheeting of Stainless steel grade 304 uniformly matt polished with 12 grit and reinforced with 35mm x 35mm x 5mm MS angle frame welded with supports / legs at bottom to support undershelve. Cover from the front 16 gauge stainless steel. All shelves will be turned down 1½" and ½" underneath on all sides in channel shape with resulting corners cutout to fit counter of leg complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
5 5 WORK TABLE WITH UNDER SHELF (Size 72"x24"x(34"+6")\nProviding by supplying, fixing and placing in position complete, work table of size 72"x24"x(34"+6") made of 16 gauge Stainless Steel of grade 304 duly 120 grit matt polished with all resulting edges rounded with no bur or other excess material left. Top will be turned down 2” and ½" underneath in channel shape on all exposed sides, in case of sink in top wherever mentioned the side shall be raised by ¾” on all exposed sides, where tables are placed against building walls, they will be turned up at back approximately 6” returned ¾” at 45 degree to wall with all exposed ends closed, argon are welded and smooth polish. The work table and undershelve sheet shall be placed on welded MS angle frame of size 35mmx35mmx5mm shall be primed and painted which will be welded with stainless steel square pipe/dia pipe of size 40mm supports/legs of table having adjustable nylon leveling feet at bottom and two tables shall have arrangements to make it as single table and including undershelves of size 36"x24"x(12"+6") constructed of 0.8mm, Stainless Steel sheeting of Stainless steel grade 304 uniformly matt polished with 12 grit and reinforced with 35mm x 35mm x 5mm MS angle frame welded with supports / legs at bottom to support undershelve. All shelves will be turned down 1½" and ½" underneath on all sides in channel shape with resulting corners cutout to fit counter of leg complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
6 6 WORK TABLE WITH UNDER SHELF (Size 36"x24"x(34"+6")\nProviding by supplying, fixing and placing in position complete, work table of size 36"x24"x(34"+6") made of 16 gauge Stainless Steel of grade 304 duly 120 grit matt polished with all resulting edges rounded with no bur or other excess material left. Top will be turned down 2” and ½" underneath in channel shape on all exposed sides, in case of sink in top wherever mentioned the side shall be raised by ¾” on all exposed sides, where tables are placed against building walls, they will be turned up at back approximately 6” returned ¾” at 45 degree to wall with all exposed ends closed, argon are welded and smooth polish. The work table and undershelve sheet shall be placed on welded MS angle frame of size 35mmx35mmx5mm shall be primed and painted which will be welded with stainless steel square pipe/dia pipe of size 40mm supports/legs of table having adjustable nylon leveling feet at bottom and two tables shall have arrangements to make it as single table and including undershelves of size 36"x24"x(12"+6") constructed of 0.8mm, Stainless Steel sheeting of Stainless steel grade 304 uniformly matt polished with 12 grit and reinforced with 35mm x 35mm x 5mm MS angle frame welded with supports / legs at bottom to support undershelve. All shelves will be turned down 1½" and ½" underneath on all sides in channel shape with resulting corners cutout to fit counter of leg complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
7 7 DEEP FAT FRYER (Size 5 ltrs.)\nProviding by supplying, fixing and placing in position complete, handy electrically operated deep fat fryer of capacity 5ltr. With Stainless steel wire mesh frying baskets and all thermostatically controlled elements made of SS 304 grade complete in all respect and to the entire satisfaction of Engineer in charge. 2 each
8 8 WORK TABLE WITH UNDER SHELF (Size 24"x24"x(34"+6"))\nProviding by supplying, fixing and placing in position complete, work table of size 24"x24"x(34"+6") made of 16 gauge Stainless Steel of grade 304 duly 120 grit matt polished with all resulting edges rounded with no bur or other excess material left. Top will be turned down 2” and ½" underneath in channel shape on all exposed sides, in case of sink in top wherever mentioned the side shall be raised by ¾” on all exposed sides, where tables are placed against building walls, they will be turned up at back approximately 6” returned ¾” at 45 degree to wall with all exposed ends closed, argon are welded and smooth polish. The work table and undershelve sheet shall be placed on welded MS angle frame of size 35mmx35mmx5mm shall be primed and painted which will be welded with stainless steel square pipe/dia pipe of size 40mm supports/legs of table having adjustable nylon leveling feet at bottom and two tables shall have arrangements to make it as single table and including undershelves of size 24"x24"x(12"+6") constructed of 0.8mm, Stainless Steel sheeting of SS grade 304 uniformly matt polished with 12 grit and reinforced with 35mm x 35mm x 5mm MS angle frame welded with supports / legs at bottom to support undershelve. All shelves will be turned down 1½" and ½" underneath on all sides in channel shape with resulting corners cutout to fit counter of leg complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
9 9 TWO BURNER INDIAN RANGE (Size 45"x24"x(34"+6")\nProviding by supplying, fixing and placing in position complete, two burner indian cooking range with one under shelf of size 45"x24"x(34"+6") with frame made of MS angle 35mmx35mmx5mm duly primed and painted with top in 16 guage Stainless Steel 304 grade non-magnetic and legs of 1.5" dia/square tube of 16 gauge Stainless Steel 304 grade non magnetic with adjustable nylon leveling feet with side coverage of 22 guage (PC sheet) in Stainless Steel 304 grade will be turned down 2" and ½" in channel shape to hold the pilot burner controls and removable spill tray underneath burners of 0.8mm guage SS 304 grade with Stainless steel handles complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
10 10 STOCK POT (Size 24"x24"x24")\nProviding by supplying, fixing and placing in position complete, stock pot of size 24"x24"x24" with frame made of MS angle 35mmx35mmx5mm duly primed and painted with top in 16 guage Stainless Steel 304 grade non-magnetic and legs of 1.5" dia/square tube of 16guage Stainless Steel 304 grade non magnetic with adjustable nylon leveling feet with side coverage of 22 guage (Plastic Coated sheet) in Stainless Steel 304 grade will be turned down 2" and ½" in channel shape to hold the (heavy duty) pilot burner controls and removable spill tray underneath burners of 16 guage SS 304 grade with Stainless steel handles complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
11 11 DOSA PLATE WITH PUFFER (48"X24"X34"+6")\nProviding and supplying Dosa Plate with Puffer of size 48"x24"X34" consisting of heavy duty MS plate (removable) for dosa and chapati range, top area covered as approx 2/3 portion for baking or cooking the chapati both side and 1/3 portion kept for puffing as a grill area. 12 mm thick polished mild steel or stainless steel cooking plate for chapati or 16mm thick plate for dosa plate welded to 16 swg thick stainless steel trims. 18 swg thick stainless steel sheet with recessed design. "V" type HP burners of min. 40000 btu/ hr. capacity each with the chapati, dosa plate to ensure uniform heating throughout the plate. Cast iron or mild steel puffing grid fitted on right hand side. All sides turned down 50mm and in 12mm, both sides, control valve & pilot @ Psi pressure to be mounted on the front, with one under shelf welded over with frame made of MS angle 35mmX35mmx5mm duly primed and painted with top in 16 guage Stainless Steel of 304 grade non-magnetic with legs in 1½" dia/ square pipe of Stainless Steel of 304 grade non magnetic with adjustable nylon leveling feet with side coverage by 22 guage Stainless Sheet (PC sheet) in 304 grade. The complete unit has inbuilt oil drain box to collect the oil complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
12 12 SS DISPLAY COUNTER (60"x30")\nStainless steel interior and exterior construction, tempered front and side panel glass and doors. Lower tier features humidified operation. Large 10-gallon water well with automatic or manual fill. Two water well strip heaters. Low water indicator light. Drain tube prevents water well overflow. Water temperature display and control. Upper tier in CW-216 operates with dry heat only. Long-lasting sheath radiant heaters provide direct overhead heating in+C22 both tiers. Insulated top and bottom for energy efficient operation. Independent heating controls for each tier hold different foods at optimum temperatures. Angled solid glass on customer side for clear, easy viewing. Removable sliding glass doors on control side. Incandescent lighting for appealing food display. Removable access panels for easy maintenance. 1 each
13 13 WATER COOLER (150 LTR )\nProviding and supplying water cooler of capacity 150 litres and size 24"x24"x66" having outer body of stainless steel of 304 grade and inner body of 304 grade stainless steel with crompton compressor of 0.75 tonne having complete arrangements alongwith with two taps complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
14 14 ONION AND POTATO BIN (36"X24"X34")\nProviding and supplying dry storage bin of size 36"x24"x34" made of 2.0mm Stainless steel wire mesh of grade 304 welded with legs of 40mm dia/ square pipe with adjustable nylon leveling feet complete in all respect and to the entire satisfaction of Engineer in charge. 2 each
15 15 WORK TABLE WITH SINK (L.H.S.) (48"x24"x34"+6")\nProviding and supplying work table of size 48"X24"X(34"+6") made of 16 swg Stainless Steel of grade 304 duly 120 grit matt polished with all resulting edges rounded with no bur or other excess material left. Top will be turned down 2” and ½" underneath in channel shape on all exposed sides, in case of sink (24"x24") in top wherever mentioned the side shall be raised by ¾” on all exposed sides, where tables are placed against building walls, they will be turned up at back approximately 6” returned ¾” at 45 degree to wall with all exposed ends closed, argon are welded and smooth polish. The work table and undershelve sheet shall be placed on welded MS angle frame of size 35mmx35mmx5mm shall be primed and painted which will be welded with stainless steel square pipe/ dia pipe of size 40mm supports/legs of table having adjustable nylon leveling feet at bottom and two tables shall have arrangements to make it as single table and including undershelves of size 45"x24"x(12"+6") constructed of 0.8mm, Stainless Steel sheeting of SS grade 304 uniformly matt polished with 12 grit and reinforced with 35mm x 35mm x 5mm MS angle frame welded at bottom shall be primed and painted to support undershelve with existing SS 304 grade supports / legs of size 40mm. All shelves will be turned down 1½" and ½" underneath on all sides in channel shape with resulting corners cutout to fit counter of legcomplete in all respect and to the entire satisfaction of Engineer in charge. 2 each
16 16 UNDER COUNTER REFRIGERATOR WITH 2 OVER HEAD (Size 60"X24"X34"+14+10")\nProviding by supplying, fixing and placing in position complete, under counter refrigerator of size 60"X24"X34"+14+10" with 2 overhead shelves and heating element on the underside of the top shelf with exterior cladding of 20 gauge SS Sheet Interior Cladding No 22 gauge Stainless steel Sheet 38mm x 38mm thick. MS Angle Frame Work, 50mm Thick Puff Insulation Four (4) 38mm Dia Pipe Legs With Adjustable Bullet Feet Four (4) Nos Of Insulated Doors Const Of # 20 Gauge Stainless steel Sheet With SS Handel Magnetic Gasket Hinged At Front Compressor Unit Of Kirloskar/ Mongia / Denambush Louver front Of Compressor Unit Complete With Control With static Cooling 1”0 Waste Outlet Pipe At Bottom With Stainless steel Drip Tray & Handel, Internal Temperature +0” To +4 to be maintained complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
17 17 FOUR DOOR REFRIGERATOR ( Size 48"x36"x84")\nProviding by supplying, fixing and placing in position complete, four door vertical refrigerator for storage of size 48"x30"x84", outer body of the freezer made of 0.8mm plastic quoted Stainless steel 304 sheet and inner cabins and shelves shall be made of 22 gauge stainless steel fitted with stainless steel wire mesh jali 6mm thick crompton/ Kirloskar/ Mongia / Denambush compressor (for defreeze 0.75 HP with 15 degree C temperature) will be used. Insulation by puff. Complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
18 18 SOILED DISH BIN WITH STAND (Size 36"x27"x12")\nProviding by supplying, fixing and placing in position complete, soiled dish bin of size 36"x27"x12" made of 18 gauge Stainless steel 304 duly 120 grit matt polished with all resulting edges rounded with no bur or other excess material left mounted on a frame consisting of Stainless steel square pipes of size 40mm having adjustable nylon levelling feet complete in all respect to the entire satisfaction of Engineer in charge. 2 each
19 19 DISH LANDING TABLE WITH CHUTE LEFT HAND SIDE & 1 OVER HEAD SUNKEN TOP (Size 60"x24"x(34"+14") \nProviding by supplying, fixing and placing in position complete, work table of size 60"x24"x(34"+14") made of 16 gauge Stainless Steel of grade 304 duly 120 grit matt polished with all resulting edges rounded with no bur or other excess material left. Top will be turned down 2” and ½" underneath in channel shape on all exposed sides, with a hole for chute on the left in top wherever mentioned the side shall be raised by ¾” on all exposed sides, where tables are placed against building walls, they will be turned up at back approximately 6” returned ¾” at 45 degree to wall with all exposed ends closed, argon are welded and smooth polish. The work table and undershelve sheet shall be placed on welded MS angle frame of size 35mmx35mmx5mm shall be primed and painted which will be welded with stainless steel square pipe/dia pipe of size 40mm supports/legs of table having adjustable nylon leveling feet at bottom and two tables shall have arrangements to make it as single table and including undershelves of size 60"x24"x(12"+6") constructed of 0.8mm, Stainless Steel sheeting of SS grade 304 uniformly matt polished with 12 grit and reinforced with 35mm x 35mm x 5mm MS angle frame welded with supports / legs at bottom to support undershelve. All shelves will be turned down 1½" and ½" underneath on all sides in channel shape with resulting corners cutout to fit counter of leg complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
20 20 TRIPLE SINK UNIT (Size 69"x24"x(34"+6")\nProviding by supplying, fixing and placing in position complete, double sink of outer size 69"x24"x(34"+6") constructed of 16 gauge. 304 grade quality Stainless Steel with side edge shall be turned down 2" and ½" in channel shape and shall have radius corners, argon arc welded, smooth ground and uniformly finished, duly fitted with 1½" dia. British Standard Pipe Drain Copling and 1½" British Standard Pipe valve and complete frame of sink shall be surrorted over frame of MS angle of size 35mmx35mmx5mm shall be duly primed and painted and having 1½" dia/ square pipe supports of Stainless Steel of 304 grade non magnetic with adjustable nylon leveling feet complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
21 21 STAINLESS STEEL RACK WITH PERFORATIONS (Size 48"x24"x72")\nProviding by supplying, fixing and placing in position complete, vertical rack with five shelves of size 48"x24"x72" made of 18 gauge Stainless steel sheeting of grade 304 welded with legs of 40mm dia/ square pipe with adjustable nylon leveling feet and having stainless steel tubular frame of size 40mmx20mm of 16 guage of 304 grade provided underneath each shelf and all shelves will be turned down 2" and ½" in channel shape underneath on all sides complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
22 22 STAINLESS STEEL RACK (size 60"x24"x72")\nProviding by supplying, fixing and placing in position complete, vertical rack with five shelves of size 60"x24"x72" made of 0.8mm Stainless steel sheeting of grade 304 welded with legs of 40mm dia/ square pipe with adjustable nylon leveling feet and having stainless steel tubular frame of size 40mmx20mm of 16 guage of 304 grade provided underneath each shelf and all shelves will be turned down 2" and ½" in channel shape underneath on all sides complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
23 23 STAINLESS STEEL EXHAUST HOOD ( size 168"(approx 12'+2') x36"x18")\nProviding by supplying, fixing and placing in position complete, Stainless Steel exhaust Hoods made of 20 guage Cold Rolled Coil sheet with Stainless steel baffle filters & grease and it top edge must be at min 2400mm height. The front edge of hood shall be 400mm deep and backside shall be 500mm min deep and it shall be 300mm extra on front and sides than cooking area. Exhaust fan either GEC/ Crompton make 18" dia and 1400 RMP non-magnetic with oil filters covering tandoor, chapati plate, chinese and indian sections of size 120"(approx 10') x36"x18" complete in all respect and to the entire satisfaction of Engineer in charge. 14 Rft
24 24 AIR COOLER ( size 48"x48"x60")\nProviding by supplying, fixing and placing in position complete, commercial Desert cooler fitted with crompton 18" dia, 1400 RPM exhaust fan of size 48"x48"x60", 1Mx1M; 5' height 24" exhaust fan; Usha / Crompton/ Khaitan make complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
25 25 DUCTING\nDUCTS TO EXHAUST :- Providing by supplying, fixing and placing in position complete, Galvanised Iron duct (24 Guage Galvanised Iron sheet) for all exhaust hoods (made of 20 gauge Cold Rolled Coil sheet with SS baffle filters & grease, non-magnetic) complete in all respect and to the entire satisfaction of Engineer in charge.\nDUCTS TO FRESH AIR :- Providing and supplying fresh air ducting (24 guage Galvanised Iron sheet as per air flow circulation duly painted with black paint over metal priming) for kitchen and washing area Complete in all respect and to the entire satisfaction of Engineer in charge. 125 Rft
26 26 EXHAUST FAN \nProviding by supplying, fixing and placing in position complete, Axial flow fan for exhaust purpose 28" dia, 1400 RPM, Crompton/ Khaitan make Complete in all respect and to the entire satisfaction of Engineer in charge. 2 each
27 27 LPG PIPE FITTING FROM CAGE TO BURNER \nProviding by supplying, fixing and placing in position complete, LPG pipe line fitting from cylinder cage upto LPG apparatus: 1 no. manifold 1" dia Tata/ Jindal C class pipe of 10 gauge, 1 nos SKN or equivalent make manifold valves, 3 nos Non return valve, 2 nos Cylinder pig tails, 2 nos pin type Adopters, Regulator 2 pc., pipe line1/2" dia C class Tata/ Jindal of 10 gauge, Needle valves, Burner pig tails; All of the material shall be of ISI mark and completly fixed as per site requirements (approx length 45') complete in all respect and to the entire satisfaction of Engineer in charge. 55 Rft
28 28 GAS CYLINDER CAGE ( size 48"x24"x40")\nProviding by supplying, fixing and placing in position complete, cylinder cage made of M.S tubular frame with 40mm square pipe of 16 guage of size 48"x24"x40", shall be fixed with wall over raised platform upto plinth level and their sides, front doors and top in 20 gauge Cold Rolled Coil sheet with locking arrangements and backside with solid mesh duly painted with red paint over metal priming complete in all respect and to the entire satisfaction of Engineer in charge. 1 each
29 29 Providing by supplying, fixing and placing in position complete, commercial dustbin of good quality plastic having capacity 80 ltrs. with two wheel base and lid as per the satisfaction of the engineer in charge. 5 each
30 30 Providing by supplying, fixing and placing in position complete, storage Stainless Steel cabinet (SS304) (2' wide x 2'5" height incl. foot) under the slab with one under shelf and single door having the following thickness: (10' + 7')\nTop - 20 gauge (SS304), Door - 20 gauge (SS304), Covering Point - 20 gauge (SS304). complete in all respects as per site / drawing and to the entire satisfaction of Engineer in charge. 17 metre
31 31 Providing by supplying, fixing and placing in position complete, storage Stainless Steel overhead cabinet (SS304) (2' wide x 2'5" height incl. foot) with partition and single door having the following thickness: (7' + 6') Top - 20 gauge (SS304), Door - 20 gauge (SS304), Covering Point - 20 gauge (SS304). complete in all respects as per site / drawing and to the entire satisfaction of Engineer in charge. 13 metre
32 32 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
33 33 25 mm thick 151.7 Sqm.
34 34 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 11.82 Sqm.
35 35 Providing and fixing 1st quality / ceramic / vitrified glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make of size 300x600 (Colour & design as approved bt Engineer-in-charge) in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 139.4 Sqm.
36 36 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
37 37 Granite of any colour and shade
38 38 Area of slab upto 0.50 sqm 7.95 Sqm.
39 39 Providing and Fixing 2" thick toughened glass partition with 5" thick frost bands alternating throughout the height of the glass partition for teachers sitting area (65"x151.5")+(191"x151.5") 24.98 Sqm.
40 40 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
41 41 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. 199.34 Sqm.
42 42 Providing and fixing Bar Tables with 3' Dia x 3' Height with 35mm thick Granite top and SS Bottom Vertical Pillar 6" Dia Fixed to the floor in Verandah Area. Color of Granite to be approved by the engineer-in-charge. 4 each
43 43 Removal of existing paint and Repainting of Wooden Window frames of light glass above wall to a colour as approved by the engineer-in-charge, on both sides (interior and exterior faces). Timber surfaces that are to be polished or painted shall be free from unevenness and dirt etc. if any. The surface shall be rubbed down dry to the satisfaction of the EIC. If unless approved, the EIC feels the need the same shall be rubbed by sand paper to make it level and to remove any unevenness. Oil paints, plastic emulsion paints shall be of approved make. Oil bound distemper shall be of approved make, and shade. The first coat shall be under coat recommended by the manufacturer. The second and third coats shall be applied as directed. No brush mark shall be seen after; application of the third coat 14 Sqm.
44 44 Providing and fixing Wooden framed glass partition with central automatic sliding door over 4" sil of concrete 1:2:4 having fixed partition on each side, total height 83.5" with upper glass panel 48.5" height x 37" width and lower glass panel 27" height x 37" width. Total width of the partition with door = 10' (as shown in drawing). 1 each
45 45 Providing and fixing first quality glazed vitrified tiles ISI Mark 4'x2' conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size (size 1200mm x 600mm) as approved by engineer-in-charge over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg/sqm., including pointing in white cement mixed with pigment of matching shade complete. 161.98 Sqm.
46 46 Providing and applying mural paint on walls of dining area as approved by the engineer in charge. 172.25 Sqm.
47 47 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
48 48 Semi rigid pipe
49 49 32 mm dia 5 each
50 50 Providing and fixing soil, waste and vent pipes :
51 51 100 mm dia
52 52 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 5 metre
53 53 75 mm diameter :
54 54 Centrifugally cast (spun) iron socketed pipe as per IS: 3989 20 metre
55 55 Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :
56 56 100 mm
57 57 Sand cast iron S&S as per IS - 3989 20 each
58 58 75 mm
59 59 Sand cast iron S&S as per IS - 3989 45 each
60 60 Providing and fixing collar :
61 61 100 mm
62 62 Sand cast iron S&S as per IS - 3989 7 each
63 63 75 mm
64 64 Sand cast iron S&S as per IS - 3989 12 each
65 65 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
66 66 100 mm inlet and 75 mm outlet
67 67 Sand cast iron S&S as per IS - 3989 7 each
68 68 Labour for fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall
69 69 25 mm dia nominal bore 13 metre
70 70 Labour for fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
71 71 15 mm dia nominal bore 11 metre
72 72 20 mm dia nominal bore 13 metre
73 73 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
74 74 25 mm nominal bore 2 each
75 75 20 mm nominal bore 1 each
76 76 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
77 77 25 mm nominal bore 1 each
78 78 Providing and fixing uplasticised PVC connection pipe with brass unions :
79 79 45 cm length
80 80 15 mm nominal bore 2 each
81 81 Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead :
82 82 100 mm diameter pipe 11 each
83 83 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
84 84 15 mm nominal bore 3 each
85 85 20 mm nominal bore 3 each
86 86 25 mm nominal bore 2 each
87 87 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 2000 per litre
88 88 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 7 each
89 89 Cutting holes up to 30x30 cm in walls including making good the same:
90 90 With common burnt clay F.P.S. (non modular) bricks 13 each
91 91 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
92 92 100x100 mm size P type
93 93 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 2 each
94 94 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
95 95 Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :
96 96 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1 each
97 97 Providing and fixing C.P. Brass angle valve complete in all respect make as approved by EIC. 2 each
98 98 Providing and fixing CP Soap Dish completein all respect make as approved by EIC. 2 each
99 99 Providing and fixing Gyser 40 Liters capacity complete in all respect makes as approved by EIC. 1 each
100 100 Prvoding and fixing C.P. Bib Tap long nose complete in all respect make as approved by EIC. 14 each
101 101 Construction of Curb of Cement Concrete 1:2:4: with PVC pipe 4" 6 kg Pressure per Cm2 upto average lenth of 1' including cost of sand bajri etc. 7 each
102 102 HCI Scrap/GI Scrap/ PVC Scrap @ Rs.20 per kg Old wooden chowkhats @ Rs 250 each Old door/ Windows unusable @ Rs.150/- Pig lead Scrap @ Rs. 90/- per kg Brass Scrap @ Rs. 250/- per kg removed door shutters@ 500/- each Fittings of removed door shutters@ 25/- per kg Old Bricks recovery @ 4/- each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail