Military Engineer Services-MES has published Provision Certain Special Repairs , Lbw , Revenue And Minor Works In Age B/R I Sub Division And Age E/M Sub Division At Mil Stn Bikaner And Age Mffr Sub Division Under Ge ( N ) Bikaner. Submission Date for this Tender is 22-02-2021. Electromechanical Work Tenders in GE (N) Bikaner Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Feb-2021 | Revised BOQ | BOQ | 15-02-2021 |
| 2 | 15-Feb-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-02-2021 |
| Name of Work: PROVISION CERTAIN SPECIAL REPAIRS,LBW,REVENUE AND MINOR WORKS IN AGE B/R I SUB DIVISION & AGE E/M SUB DIVISION AT MIL STN BIKANER & AGE MFFR SUB DIVISION UNDER GE (N) BIKANER | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Section I BIKANER AREA:-\nSurface dressing n exc 15 cm deep in soft /loose soil. | 25 | Sqm | |
| 2 | 2 | Surface excavation (not exceeding 30cm deep) and averaging 15 cm , getting out in any type of soil. | 305 | Sqm | |
| 3 | 3 | Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 mtr in depth and getting out complete all as specified and as directed by the Engr-in-charge. | 231 | Cum | |
| 4 | 4 | Excavation over area n exc. 1.5 m deep and getting out in soft soil | 77.4 | Cum | |
| 5 | 5 | Excavation over area exc. 1.5 m but n exc 3 m deep and getting out in soft soil | 125.1 | Cum | |
| 6 | 6 | Excavation over area exc. 3 m but n exc 4.5 m deep and getting out in soft soil | 172.8 | Cum | |
| 7 | 7 | Excavation over area exc. 4.5 m but n exc 6 m deep and getting out in soft soil | 220.5 | Cum | |
| 8 | 8 | Excavation over area exc. 6 m but n exc 7.5 m deep and getting out in soft soil | 268.2 | Cum | |
| 9 | 9 | Excavation over area exc. 7.5 m but n exc 9 m deep and getting out in soft soil | 315.9 | Cum | |
| 10 | 10 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil. | 40 | Each | |
| 11 | 11 | Returning filling in including spreading levlling ,watering and well ramming in layers nexc 25cm thick complete all as spfd. | 178 | Cum | |
| 12 | 12 | Spreading levelling surplus soil under floor or in foundations in layers not exc ceeding25 cm including watering and concolidating complette all as spfd. | 29 | Cum | |
| 13 | 13 | M&L for sand filling under floors , cushioning under interlocking tiles or foundations complete all as spfd. | 40 | Cum | |
| 14 | 14 | Removal of excavated material to a distance n exc 50 m and depositing at a level nexc 1.5 m above the starting point | 79 | Cum | |
| 15 | 15 | M&L for hardcore of broken stone or boulders gauge n exc 63mm , deposited , spread and levelled in layers nex 15cm thick watered and rammed to a true surface | 13.5 | Cum | |
| 16 | 16 | M&L for hardcore of broken brick bats of gauge n exc 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface. | 15 | Cum | |
| 17 | 17 | M&L cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foudation, filling, sub base and mass concrete all as specified. | 38.5 | Cum | |
| 18 | 18 | M&L cement concrete (1:3:6) type C2 using 40mm graded stone aggregate as in foudation, filling, sub base and mass concrete all as specified. | 5 | Cum | |
| 19 | 19 | M&L for reinforced cement concrete 1:2;4 type B1 (using 20mm graded aggregate ) in coping , plinth Band/lintle band and the like incl necessary form work complete all as specified | 5.5 | Cum | |
| 20 | 20 | M&L Brickwork with fly ash bricks (old sized bricks) , straight or curved on plan exc 6 m mean radius, built in ement mortar 1:4 | 67 | Cum | |
| 21 | 21 | M&L Brickwork with flyash bricks, (old sized bricks) straight or curved on plan to any radius in half brick thick walls built in cm 1:4 | 5 | Sqm | |
| 22 | 22 | M&L for brick work with fly ash bricks (old sized bricks) straight or curved on plan exc 6 m mean radious built in cement mortar 1:6. | 71.5 | Cum | |
| 23 | 23 | M&L Brickwork with fly ash bricks (old sized bricks) , straight or curved on plan exc 6 metre mean radius built in cement sand mortar 1:6 in half brick thick . | 8 | Sqm | |
| 24 | 24 | M&L for pre cast RCC jalli 35mm thick in PCC 1:2:4 type B0 using 12.50mm stone aggregate set and joined in CM 1:6 complete all as specified and directed by Engr-in-charge | 40 | Sqm | |
| 25 | 25 | M&L for reinforced cement concrete type B0 (20mm stone aggregate)in pre cast posts staining or terminal posts structs etc for RCC jali average sectional area n exc 100 sq cm & height not exc 1m with or without chamfered angles and flat, splayed rounded or mitered tops as directed and fixed comlete all as specified and directed by engr in charge | 50 | Each | |
| 26 | 26 | M&L Form work to soffits of suspended slabs such as roof slabs floor slabs and similar work nexc 200mm thick finished rough | 82 | Sqm | |
| 27 | 27 | M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide finished rough . | 45 | RM | |
| 28 | 28 | M&L Formwork to sides of pillars,posts, struts, piers, columns and stanchions finished rough. | 80 | Sqm | |
| 29 | 29 | M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. finished rough | 110 | Sqm | |
| 30 | 30 | M&L for reinforced cement concrete as in foundation ,including footings ,foundations beams , bases for columns ,etc ,(Design Mix M-25) ,,using 20 mm graded crushed stone aggregate. | 11 | Cum | |
| 31 | 31 | M&L for reinforced cement concrete as in columns ,pillars ,etc ,(Design Mix M-25) ,,using 20 mm graded crushed stone aggregate. | 9.5 | Cum | |
| 32 | 32 | M&L for reinforced cement concrete M-25 Design Mix in beams complete all as specified | 7 | Cum | |
| 33 | 33 | M&L Mild steel TMT steel bars 10mm dia and over cut to length bent to shape reqd incl cranking bending spirally for hooping for columns hooking ends and binding with m.s wire annealed not less than 0.9mm dia | 1860 | kg | |
| 34 | 34 | Dito exc 5mm dia upto 10mm dia as in stirrups | 410 | kg | |
| 35 | 35 | M&L mild steel steel TMT bars 6mm to 8mm dia and over cut to length bent to shape reqd ,incl cranking ,bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia | 510 | Kg | |
| 36 | 36 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground | 110 | RM | |
| 37 | 37 | Matting, single or double any type including, bamboo framing or bamboo supports, cover fillets, if any | 500 | Sqm | |
| 38 | 38 | S&F Mild steel angle iron Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;etc posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh\netc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165. | 650 | kg | |
| 39 | 39 | Fixing only chain link fencing incl line wire any mesh size | 350 | Sqm | |
| 40 | 40 | Supply only Chain link MS gavinised fencing any size and type ( Wt 2 Kg/ sqm apprx) as specified and directed | 500 | Kg | |
| 41 | 41 | S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm to 80mm spacing and straining and ixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed complete. | 4 | 100 Rm | |
| 42 | 42 | S&F framed work such as steel gates etc with intricate/ornamental design and with ends of bars shouldred and or riveted and similar works confirming to Fe 310 -410 including pintle hinges stops hand made sliding bolt etc all as specified and directed | 1080 | Kg | |
| 43 | 43 | M&L for Stain Less steel Letter 250 mm long with fixing nut/ screw/ bolt | 14 | Each | |
| 44 | 44 | M&L steel work in tubular section as in trusses including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS- 1161-1979 graded St 240. | 1830 | Sqm | |
| 45 | 45 | M&L mild steel work Framed work as in doors or gates of angle or other section\nwith gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other\ncovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks\nand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,\nrunning rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (Gde-\nE- 250) quality 'A' | 240 | Kg | |
| 46 | 46 | S&F Mild steel screw bolts with hexagonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut nexc 5cm long dia of shank 11to 15mm | 55 | Kg | |
| 47 | 47 | S&F 12mm dia Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged, and jagged or lewised, n exc 15cm long | 40 | Kg | |
| 48 | 48 | S&F Mild steel Plates (plain or chequered ) channels square cut or notched oridinary or counter sunk forming holes w/o any attatchment | 150 | Kg | |
| 49 | 49 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified | 135.5 | Sqm | |
| 50 | 50 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified | 8.5 | Sqm | |
| 51 | 51 | M&L for reinforced cement concrete M-20 type B1 (using 20mm graded agg) as in slab supported wall beams complete all as specified | 0.75 | Cum | |
| 52 | 52 | Brushing neat cement slurry @3kg/Sqm mixed with water proofing compound including 20mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separatley) \n | 60 | Sqm | |
| 53 | 53 | Supply only water proofing compound | 47 | Kg | |
| 54 | 54 | M&L for priming surfaces with bituminous primer conforming to IS-3384 @ 0.30kg/sqm, after drying of primer applying a coat of hot blown bitumen conforming to IS-702 @ 1.20 kg/sqm and layin polymeric water proofing membrane, five layerd with centre core of 90 micron high molecular density polythelene film (min weight 3kg per sqm) with end over laps not less than 150mm and side lap 75 mm and applying a coat of semi hot blown bitumen 85/25 grade @ 0.50kg/sqm and dusted over the bitumen coat all as directed. | 93 | Sqm | |
| 55 | 55 | M&L Jodhpur stone of roof slabs, self faced 7.5 cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete | 51 | Sqm | |
| 56 | 56 | M&L PCC 1:3:6 type C-2 using 40mm graded stone agg. ,50mm thick as in floors over stone patti roof slab finished the surface even and fair comp.all as specified. | 51 | Sqm | |
| 57 | 57 | M&L Polythene film, black, 50micron laid in floors | 33 | Sqm | |
| 58 | 58 | M&L Lime concrete terracing as specified on roof | 9.3 | Cum | |
| 59 | 59 | M&L 40 mm thick Brick tiles bedded in 15 mm thick cement and sand mortar (1:6) and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge. | 93 | Sqm | |
| 60 | 60 | M&L Applying evenly a tack coat of industrial bitumen 85/25 ,1.2kg/sqm incl cleaning surface. | 33 | Sqm | |
| 61 | 61 | M&L Jodhpur stone of roof slabs, self faced 5.00 cm thick, as in shelves , chajjas shelves etc nexc 2 m in length., hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete | 22 | Sqm | |
| 62 | 62 | M&L Dubbing out average 10 mm thick on irregular face of walls (when specifically ordered in writing) in cement mortar 1:4 . | 1 | Sqm | |
| 63 | 63 | M&L 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and finished rough for receiving tiles as in dado complete all as specified. | 50 | Sqm | |
| 64 | 64 | M&L 25mm thick PCC type B-0 using 20mm graded crushed stone aggregate as in sub base for laying floor finishes complete all as specified | 137 | Sqm | |
| 65 | 65 | M&L screed bed or bedding layer 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified. | 137 | Sqm | |
| 66 | 66 | M&L Machine cut kota stone slab flooring 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified | 133 | Sqm | |
| 67 | 67 | M&L machine cut kota stone 18-20 mm thick in riser , steps, skirting, dado , and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. | 9 | Sqm | |
| 68 | 68 | M&L granite 20mmthick set in cement mortar 14 on vertical surfaces including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed | 4 | Sqm | |
| 69 | 69 | M&L Non-skid ceramic coloured tiles (square/rectengular) 7 to 8 mm thick, area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over screed bed or bedding layer 15 mm thick in cement mortar 1:4 complete all as specified and directed. | 11 | Sqm | |
| 70 | 70 | M&L glazed ceramic coloured tiles in vertical surfacaes 350x250x7mm/450x350x7mm thick set set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment over 15 mm thick rendering in CM 1:4 complete all as specified. | 45 | Sqm | |
| 71 | 71 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement. | 265 | Sqm | |
| 72 | 72 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even with extra cement as neeru finish . | 11 | Sqm | |
| 73 | 73 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and incl. mixing water proofing compound and finished even and smooth without using extra cement (Note: Cost of wpc shall be measured and paid for seperately ). | 120 | Sqm | |
| 74 | 74 | M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work & concrete, finished even and fair on external wall surfaces complete all as specified & directed.(Note: Cost of wpc shall be measured and paid for seperately ). | 576 | Sqm | |
| 75 | 75 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement. | 30 | Sqm | |
| 76 | 76 | M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement. | 62 | Sqm | |
| 77 | 77 | Supply only liquid water proofing compound | 15 | Ltr | |
| 78 | 78 | M&L for flush pointing in cement mortar 1:3 on ceiling surfaces of stone patti roofs complete | 5.3 | 10 Sqm | |
| 79 | 79 | M&L PCC 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone agg as in sub bse for receiving floor finishes | 50 | Sqm | |
| 80 | 80 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness ,M-35 Grade using grey cement and pigment vibratory process laid over sand cushioning complete all as specified & directed. complete . | 50 | Sqm | |
| 81 | 81 | M&L for 100 mm thick cement concrete type B-2 ,1:2:4 (20 mm graded aggregate) laid to alternate pannels and making surface even and fair complete all as Eng-in-Charge . | 30 | Sqm | |
| 82 | 82 | M&L for 40mm thick PCC type B-1 1:2:4 , using 20mm graded crushed stone aggregate as in flooring finished even and smooth without using extra cement. | 3.5 | Sqm | |
| 83 | 83 | Supply only 3mm thick glass 38mm wide glass dividing stripps laid in design as directed by Eng-in-charge | 5 | Rm | |
| 84 | 84 | M&L PCC 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone agg as in flooring finished even and smooth with using extra cement, | 3 | Sqm | |
| 85 | 85 | M&L PCC 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone agg as in Plinth Protection finished even and smooth wituout using extra cement | 75 | Sqm | |
| 86 | 86 | S&F solid PVC door frames of size 50mmx47mm madwe out of 5mm prelam sheet in stead of plane colourPVC sheet & eadgs will be painted to match with prelam sheet sheet reinforced with ms square tubecomplete all as spd | 19 | RM | |
| 87 | 87 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall bw covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for tip rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing | 5.7 | Sqm | |
| 88 | 88 | S&F Factory made pressed steel frame / box windows ventilators with glazed and fly proof shutters provided to sizeand dimensions as specified and shown on drawing no BTD-888R sheet no 1/5 to 5/5 and BTD 889 sheet no 1/4 to 4/4 with and including MS grill , MS fillets pintol hinges , tower bolts , MS Pressed handle Peg stay MS lugs , locking arrangements , dash through bolt where required etc complete all as spfd and as directed :\nNoted : PCC filling in frames , glass , wire gauge and painting shall be measured and paid for seperately under respective item of work. Provn of all other items as shown on drawings shall be deemed to be included in quoted rate of this item .(ii) The quoted rates shall be deemed to be included provn of cutting holes of suitable depth in walls for inserting lugs etc and making good dismantled portion in pcc 1:2:$ type Bo using 15,5 mm graded crushed stone graded aggregate and CM 1:3. :(windows to be provided with provn of coller opening and shutter w/o any extra cost to govt.) | 14.5 | Sqm | |
| 89 | 89 | M&L Mild steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 | 500 | Kg | |
| 90 | 90 | M&L Mild steel Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) | 500 | Kg | |
| 91 | 91 | M&L Mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 | 20 | Kg | |
| 92 | 92 | S&F Pressed steel frames of size 105mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns. | 10 | RM | |
| 93 | 93 | S&F Pressed steel frames of size 105mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns. | 5 | RM | |
| 94 | 94 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in filling in pressed steel frames complete all as specified and as directed by Engineer-in-Charge | 0.95 | Cum | |
| 95 | 95 | S&F factory made 2nd class hard wood 35mm thick plain framed panelled shutter two panels with lock rail and panels of 9mm BWP commercial ply or 12mm veneered on both faces. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-charge. | 9.35 | Sqm | |
| 96 | 96 | M&L IInd class hard wood glazed and skeleton shutters 35mm open rebated and prepared to receive glass, gauze etc, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I section 8, clause 8.20 (a) supplied and fixed to chowkats | 3 | Sqm | |
| 97 | 97 | S&F 200 mm size mild steel barrel tower bolt of extruded section and fixed. | 12 | Each | |
| 98 | 98 | S&F 150mm size mild steel pressed handles . | 12 | Each | |
| 99 | 99 | S&F Butt hinges mild steel medium weight cold rolled of 100mm. | 18 | Each | |
| 100 | 100 | S&F mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12mm dia with and incl , bolts four on bolt plate and two on staple plate of 250mm long. | 4 | Each | |
| 101 | 101 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete | 6 | Each | |
| 102 | 102 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane all as specified | 11.8 | Sqm | |
| 103 | 103 | S&F galvanished mild steel wire cloth .46mm nominal dia of wire and average width of apperature 1.18mm | 11.9 | Sqm | |
| 104 | 104 | S&F 150mm size aluminium anodised barrel tower bolt of extruded section and fixed. | 6 | Each | |
| 105 | 105 | S&F 150mm size extruded aluminium handles fabricated type, anodised \nand fixed. | 6 | Each | |
| 106 | 106 | S&F 100mm size medium wt butt hinges aluminium anodised all as specified. | 12 | Each | |
| 107 | 107 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aperture1.18mm | 2 | Sqm | |
| 108 | 108 | S&F Cast Iron Pipe (Sand Cast) for waste and vent pipe with or without ears, with cement joints fixed to walls, 50mm dia. | 3.6 | RM | |
| 109 | 109 | S&F Cast Iron Pipe (Sand Cast) for waste and vent pipe with or without ears, with cement joints 100mm dia laid in trenches. | 3 | RM | |
| 110 | 110 | S&F Cast Iron Pipe (Sand Cast) for waste and vent pipe with or without ears, with cement joints 75 mm dia laid in trenches. | 5.4 | RM | |
| 111 | 111 | S&F CI floor trap with stain less steel grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4, 75mm dia. | 4 | Each | |
| 112 | 112 | S&F bends (any radius), disminishing pieces or tappers(larger bore measures), 100mm dia with access door. | 4 | Each | |
| 113 | 113 | S&F bends (any radius), disminishing pieces or tappers(larger bore measures), 75mm dia with access door. | 6 | Each | |
| 114 | 114 | S&F branch pieces ,Double (equal or unequal ) ordinary or inverted (spigot or socket type) or with parallel branches 100 mm dia. | 2 | Each | |
| 115 | 115 | S&F CI cowls , 50mm dia | 2 | Each | |
| 116 | 116 | Stack clamp out of 50mm x5mm flat iron stays including bolt and nuts and securing ends of stays to walls or roof for 50mm bore piece. | 2 | Each | |
| 117 | 117 | S&F PVC (SWR) pipes 110mm bore single sockted in any length with rubber rings joints fixed to walls as in rain water pipe. | 4.5 | Rm | |
| 118 | 118 | M&L PVC(SWR) bends any radius 110mm. | 2 | Each | |
| 119 | 119 | M&L Vitreous china wash down water closet Orissa pattern white of size 550x440mm including integral foot rest excluding flushing cistern and flush pipe) incl. P or S trap comp all as specified and fixed in repairs. Make Parryware/Cera/Hindware | 2 | Each | |
| 120 | 120 | M&L vitreous china wash hand basin white flat back, size 550x400 etc with and including brackets and cutting for and pinning in in ends of brackets complete all as specified. | 2 | Each | |
| 121 | 121 | S&F in repairs PVC flushing cisterns 10 ltrs capacity including flushing pipe and connections complete . Make : CERA ( CAT No: B1010108 , or equivalent in Parryware ,Jaquar, Hindware as approved by Eng-in-Charge . | 2 | Each | |
| 122 | 122 | S&F 6 mm thick looking mirror of size as reqd at site fitted with stain less steel spacers complete all as spfd. | 2 | Sqm | |
| 123 | 123 | S&F 32mm bore waste fittings ,brass chromium plated for wash hand basin etc with long screwed shank and flynuts etc. | 2 | Each | |
| 124 | 124 | S&F 32 mm bore pvc waste pipe for disposal of waste water . | 2 | Each | |
| 125 | 125 | S&F in repair Brass chromium plated shower rose 125 mm size with and incl shower arm . | 2 | Each | |
| 126 | 126 | S&F 15 mm bore brass fancey concealed type stop valve chromium plated with long shank and cup complete screwed for iron pipe | 2 | Each | |
| 127 | 127 | S&F Fancy Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed | 2 | Each | |
| 128 | 128 | Supply and fixing stop cock brass/gun metal for 15mm bore GI pipe complete all as specified and directed by Engineer in charge. | 12 | Each | |
| 129 | 129 | S&F chromium plated Bib Tap, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia | 14 | Each | |
| 130 | 130 | Do but Long body | 4 | Each | |
| 131 | 131 | S&F peg set with and including minimum of 05 pegs mounted over stain less steel 4 mm thick as approved and directed by Eng-in-Charge | 2 | Each | |
| 132 | 132 | S&F stain less steel soap dish with and including stain less steel screws and rowel plugs. | 2 | Each | |
| 133 | 133 | S&F Towel ring of PTMT with and incl chromium plated brass screws and wooden /plastic cleats | 2 | Each | |
| 134 | 134 | S&F PTMT corner / straight glass shelf with and including chromium plated brass screws and wooden cleats | 2 | Each | |
| 135 | 135 | S&F chromium plated stop cock / angle valve with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia | 4 | Each | |
| 136 | 136 | S&F 15mm bore PVC connection with PTMT nuts. | 2 | Each | |
| 137 | 137 | Stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle , screwed both ends for iron pipe or for unions of 15mm dia all as specified | 2 | Each | |
| 138 | 138 | S&F 1000 ltr Rotational moulded polyethylene water storage tanks three layered (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 450 ltr Capacity, including Ball brass valves, high pressure, with polythene float and flynut complete. | 2 | Each | |
| 139 | 139 | S&F 15 mm bore brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe | 2 | Each | |
| 140 | 140 | S&F Steel water tubing 15mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows , tees, short pieces, connectors, back nuts, etc ) | 80 | RM | |
| 141 | 141 | S&F Steel water tubing 20 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows , tees, short pieces, connectors, back nuts, etc ) | 35 | RM | |
| 142 | 142 | S&F Steel water tubing 25 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows , tees, short pieces, connectors, back nuts, etc ) | 30 | RM | |
| 143 | 143 | S&F Steel water tubing 40 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows , tees, short pieces, connectors, back nuts, etc ) | 10 | RM | |
| 144 | 144 | S&F mild steel clamps amde out of flat iron 40 x 8 mm in teo halves for tapping through 40 to 80 mm bore GI/DI water [ipe line including drilling and welding of 15/20 mm GI socket and necessary rubber insertion ,nut,bolts & washers complete a;; as directed. | 1 | Each Job | |
| 145 | 145 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25 mm bore ISI marked & including taking out old unserviceable gate valve of 25 m dia bore complete. | 1 | Each | |
| 146 | 146 | M&L for concrete bed to drain pipes in PCC 1:3:6 type C2 using 40mm graded aggregateas for 200 mm drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for. | 273 | Rm | |
| 147 | 147 | S&F salt glazed stone ware drain pipe 200mm bore in trenches and jointed as spfd | 282 | Rm | |
| 148 | 148 | M&L for brick work with sub class B bricks (old sized bricks) straight or curved on plan exc 6m mean radius built in CM 1:4 comp all as specifeid. | 15.5 | Cum | |
| 149 | 149 | M&L For PCC type B1(1:2:4) using 20 mm graded cushed stone agg as in coping ,benching and the like incl form work | 6.5 | Cum | |
| 150 | 150 | M&L Precasted RCC 1:2:4 type B1 using 20mm graded aggregates for precast cement conc slabs as in manhole covers set in cement mortar1:4. | 1.25 | Cum | |
| 151 | 151 | Providing cement conc. as in surface channels and drains type B1 1:2:4 using 20mm graded agg and inside the man holes. | 1 | Cum | |
| 152 | 152 | M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete ,using extra cement ,incl forms moulds ,mitered/stopped ends etc | 13 | Rm | |
| 153 | 153 | Supply only integral water proofing compound | 24 | Kg | |
| 154 | 154 | S&F 150x150 mm Salt-glazed stoneware gully traps, square or round mouthed, type `P' | 1 | Kg | |
| 155 | 155 | M&L for soakage well excavation in oridinary soil ,foundation in Pcc 1:3:6 , wells of honey combed and solid brickwork ,M-25 concrete , including intercepting chamber ,screen chamber brick work in cement mortar , RCC cover slab in M-25 /RR masonary /filling with brick bats , complete of size 3.0mx 6.0m effective depth all as specified and as shown in TD drgs. | 1 | Each | |
| 156 | 156 | M&L Septic Tanks, exc, in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC slab covers including RCC precast manhole covers having 6mm plate embedded all around/fiber reinforced cover with angle iron frame vent shaft and sludge chamber etc. complete for 10 users all as specified and as shown in TD drgs. | 1 | Each | |
| 157 | 157 | M&L for preparing newly plastered surfaces of walls and applying three coats of white wash. | 275 | Sqm | |
| 158 | 158 | M&L for preparing newly plastered surfaces of ceiling and applying two coats of white wash. | 80 | Sqm | |
| 159 | 159 | M&L for preparing new plastered surfaces and applying two coats of cement base paint over a cpat of primer as per manufacturers instructions on surfaces of walls. | 490 | Sqm | |
| 160 | 160 | M&L for two coats of synthetic enamel paint on new steel surfaces including preparation over a coat of red oxide Zinc chrome primer. | 238 | Sqm | |
| 161 | 161 | M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint all as specified. | 33 | Sqm | |
| 162 | 162 | M&L for two coats of synthetic enamel paint on new wooden surfaces incl prep over a coat of pink primmer. | 25.5 | Sqm | |
| 163 | 163 | Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including new non-metallic rigid PVC concealed conduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including new sunken box covered with and including 3 mm thick bakelite laminated sheet top cover of approved make for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge. | 47 | Per Point | |
| 164 | 164 | All as per item No 163 here-in-before but socket point on the same board with other switches complete as specifed as directed by Engineer - In - Charge | 8 | Per Point | |
| 165 | 165 | All as per item No 163 here-in-before but socket point on indpendent board complete as specifed as directed by Engineer - In - Charge | 7 | Per Point | |
| 166 | 166 | All as per item No 163 here-in-before but cable 2.5 Sqmm for 15 Amps switch socket outlet on independent board complete as specifed as directed by Engineer - In - Charge | 1 | Per Point | |
| 167 | 167 | S&F Switch piano flush type, Single pole 5 Amps, one way ISI marked, complete all as specified and as directed by Engineer-in-Charge | 82 | Each | |
| 168 | 168 | S&F Socket outlet 2 in 1, flush type, 3 pin, 5 Amps, ISI marked, complete all as specified and as directed by Engineer-in-Charge. | 25 | Each | |
| 169 | 169 | S&F switch socket combination 5 in 1, 5/16 amp flush type fixed on laminated sheet top cover (laminated sheet top cover is including in point wiring). | 1 | Each | |
| 170 | 170 | S&F Lamp holder insulated body with back plate for conduit/casing capping fittings with LED Bulb 9 W complete all as specified and as directed by Engineer-in-Charge. Make Syska/Havells/Phillips/CG/Wipro. | 25 | Each | |
| 171 | 171 | S&F Ceiling rose PVC/poly carbonate insulated body three terminal ISI marked, complete all as specified and as directed by Engineer-in-Charge. | 32 | Each | |
| 172 | 172 | Supply , assembling and hanging ceiling fans 1200 mm sweep single phase 230 volts ( Double Ball -Bearing ) with 01Set of 03 Blades, canopies, hook with rubber reel safety pins complete including making connection from ceiling rose to connector with twin core twisted flexible and PVC insulated copper conductor cable , 5 star Make : CG/ Havells/Orient /Khaitan W/O regulator | 4 | Each | |
| 173 | 173 | S&F fan regulator electronic type, 230 Volt, 150 Watt with 5 step of control including making holes in laminated bakelite sheet cover and connection complete all as specified and as directed by Engineer-in-Charge. | 5 | Each | |
| 174 | 174 | Sheet metal enclosure for distribution boards Single Door , suitable for fixing MCBs 240 volts with 200 Amps rated bus bar, SPN, 2 ways, supplied and fixed in repair, including making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge. | 13 | Each | |
| 175 | 175 | Sheet metal enclosure for distribution boards, suitable for fixing MCBs 240 volts with 200 Amps rated bus bar, SPN, 4 ways double door , supplied and fixed in repair, including making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge. Make - Legrand/ GE/Seimens/L&T/Schneider/Indo Asian/C & S/Strandard/BCH/HPL | 1 | Each | |
| 176 | 176 | Sheet metal enclosure for distribution boards, suitable for fixing MCBs 240 volts with 200 Amps rated bus bar, SPN, 8 ways double door , complete all as specified and as directed by Engineer-in-Charge. Make - Legrand/ GE/Seimens/L&T/Schneider/Indo Asian/C & S/Strandard/BCH/HPL | 1 | Each | |
| 177 | 177 | S&F MCB suitable for 6 to 32 Amps, 240 Volt AC supply single pole and neutral with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge. Make :- Legrand/ GE/ Seimens/L&T/Indo Asian/C&S/ABB/BCH | 15 | Each | |
| 178 | 178 | S&F MCB single pole, 240 volts of rating 6-32 Amps, breaking capacity of 10 KA complete all as specified and as directed by Engineer-in-Charge Make : Legrand / Schneider / ABB/ Havells | 8 | Each | |
| 179 | 179 | Supply and laying or fixing or passing through pipe, stranded conductor 1100 volts grade heavy duty cable, two single core, with PVC insulated aluminium conductor served with an inner sheahing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq mm nominal cross section in service connections. | 90 | RM | |
| 180 | 180 | S&F Decorative ultra slim linear LED lightening fixture, energy efficent 18/20 Watt complete all as specified and directed by engineer-in-charge.Make Syska /Phillips/wipro/CG /Bajaj | 15 | Each | |
| 181 | 181 | Suppy and Fixing LED based security light, housing made up of LM6 pressure die cast aluminium alloy with effective thermal management, sturdiness. The fixture should have a minimum system efficiency of more than 100 lumen/watt and a minimum system lumen output of not less than 2500 lumens and maximum system wattage 25 Watts. The fixture shall have a correlated colour temperature of al least 5700K and CRI f minimum 70. The fixture shall be designed for a system life of 50,000 hours @ 70% lumen maintenance ingress protection of IP66 (lamp and gear compartment and mechanical inpact resistance raiting of IK>=08. The fixture driver should have an operating voltage range of 140-270 V & potted type for humming free operation, driver should be withstand up to 440v for 8hrs, two surge proection not less than 5KV one on driver and one external surge protection, PF>0.95 and THD<10% and have double phase protection. LED light fitting should be suitable for ambient temperature from (-) 10C to (+) 50 C. The fixture should comply with the parameters IEC 60598 and LED should comply to IEC 61000-3-2 ed. 3.2 per harmonics IEC 61347-2-3,2006 in configuration with IEC 61347-1 ed 2.0,2007 for electrical safety LM 79 and for LED LM 80 test report needs to be submitted from the house NABL accreditation laboratory. Make SYSKA/CG/C&S/Bajaj/Havells\n | 4 | Each | |
| 182 | 182 | Supply and Fixing Wall Mounted Fan of size 400 mm sweep, AC, 240 Volts complete all as specified and as directed by Engineer-in-Charge. Make : Crompton Greaves/Bajaj/Khaitan | 7 | Each | |
| 183 | 183 | Supply and fixing Street light bracket , made of GI pipe 40mm bore, light grade not less than 1.2 m long bent to shape including fixing with 2 nos suitable size of MS flat iron clamps, nuts, bolts and washers and making connections all as directed by the Engineer-in-Charge.Make of GI pipe : Jindal/Surya/Prakash | 4 | Each | |
| 184 | 184 | Supply and laying in replacement cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.00 sq mm 2 core | 65 | Meter | |
| 185 | 185 | M&L Protection to cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class 'B' bricks complete all as specified and directed by Engr-in-charge. | 0.4 | Per 1000 Nos | |
| 186 | 186 | M&L Local tibba dry sand cushioning for protection of cable complete all as specified and as directed by Engineer-in-charge. Note Local approved tibba dry sand after removal of vegetations, grass and other deleterious substances shall be used for sand cushioning. | 4.05 | Cum | |
| 187 | 187 | M & L GI tubing light grade for protection of cables with pole/ in ground of size 40mm dia complete all as specified and as directed by Engineer-in-Charge. | 6 | RM | |
| 188 | 188 | M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to main switch board, testing on completion including GI pipe 20 mm dia light grade for watering and bringing the same upto 30 cm above normal ground level with plug at top including pipe fittings etc complete and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 3 SSR Part-I. \n(Notes 1. The rate quoted shall be deemed to include for all the above provisions. 2. PCC chamber shall be constructed at least 1.5 m away from the earth electrode and pipe for watering shall be provided in slanting manner). | 3 | Each Set | |
| 189 | 189 | Supply and laying Cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.00 sq mm 2 core complete all as specified and as directed by the Engr-in-charge. | 100 | RM | |
| 190 | 190 | Protection to cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class 'B' bricks complete all as specified and directed by Engr-in-charge. | 0.64 | Per 1000 Nos | |
| 191 | 191 | Local tibba dry sand cushioning for protection of cable complete all as specified and as directed by Engineer-in-charge. Note Local approved tibba dry sand after removal of vegetations, grass and other deleterious substances shall be used for sand cushioning. | 6.48 | Cum | |
| 192 | 192 | M & L GI tubing light grade for protection of cables with pole/ in ground of size 40mm dia complete all as specified and as directed by Engineer-in-Charge. | 6 | RM | |
| 193 | 193 | Supply,fixing, testing and commissioning electric storage water heater (Geyser) vertical type with stainless-steel tank of capacity 25 Ltrs, BEE and minimum 3 Star Rating on wall including grouting suitable size of nuts, bolts and washers and making good the surfaces of walls to match with the existing surface including PVC connection, transportation up to site complete all as specified and directed by Engineer in charge. | 12 | Each | |
| 194 | 194 | M&L new sub main wiring with 2 single core, multi-stranded PVC insulated cable unsheathed 1100 volts grade with copper conductor of size 4 sq mm drawn in and including PVC casing capping including earth continuity conductor cable of size 2.5 sq mm PVC insulated unsheathed copper conductor cable connected to common earth and earth dolly complete all as specified and as directed by Engineer-in-Charge. | 95 | RM | |
| 195 | 195 | Supply & fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240 Volt. complete all as specified and directed by Engineer in charge. | 12 | Each | |
| 196 | 196 | Supply and fixing stop cock brass/gun metal for 15mm bore GI pipe complete all as specified and directed by Engineer in charge. | 12 | Each | |
| 197 | 197 | Section II MFFR AREA:-\nExcavation in trenches in soft/loose soil not exc 1.5mtr wide and not exc 1.5mtr in depth not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out complete all as specified and as directed. | 897 | Cum | |
| 198 | 198 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in any type of soil complete all as specified and as directed. | 775 | Cum | |
| 199 | 199 | Removing surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. | 126 | Cum | |
| 200 | 200 | Supplying, laying, jointing and testing Ductile iron pipe spigot & socketed size 150mm dia, class K9 suitable for rubber tyton joints duly ISI marked complete all as specified and directed by Engr-in-Charge. | 550 | RM | |
| 201 | 201 | Dismantling and taking out exisitng broken/ unserviceable/ sreviceable Ductile iron water pipe of size 150mm bore including cutting/burning out joints and bailing out water if necessary all as directed. | 1900 | RM | |
| 202 | 202 | Laying only old servicable DI pipe retrieved from item No. 2 here-in-before of dia 150 mm after cleaning from inside and outside properly and removing the rusted particles from inside and painting the outer surface of DI pipe with black bitumen paint after scrataching the surface and jointing, connecting to existing connection and removing the mud particles etc rcomplete all as specified and as directed by Engineer-in-Charge. | 1350 | RM | |
| 203 | 203 | M&L for Rubber Gasket Push on Joints suitable for Spigot and socket Ductile iron pipe of size 150 mm bore including testing of joints complete all as specifed. | 316.667 | Each | |
| 204 | 204 | S&F Ductile iron ditechable joints suitable for 150mm dia DI pipe line including clamps, nuts, bolts, washers,sockets,elbow etc and all necessary arrangement and testing complete all as required at site and as directed.(Note:- Excavation shall be measured and paid for separately) | 50 | Each Set | |
| 205 | 205 | Supplying & fixing DI special fitting of any size, type, radius, angle, tapers, increasing, decreasing sockets, tees, tail pieces and collars etc complete up to 150mm dia. | 380 | Kg | |
| 206 | 206 | .Supply and fixing in replacement 150mm dia sluice valve PN 1:6, ISI marked confirming to IS-14846, flanged and drilled, steel spindle and iron wheel including jointing material such as nuts, bolts, washers and rubber sheet etc all directed by Engr-in-ChargeMake Kirloskar/Leader. | 1 | EACH | |
| 207 | 207 | Material and labour construction of brick masonary valve pit chamber size 90X90X90cm (Internal dimension) using rub clas 'B' bricks complete including demolition of exisitng valve pit, earth work etc. type 'B' including PCC 1:5:10 type E-2 using 40mm graded stone aggregate in foundation, coping on top in PCC 1:2:4 type B-2 using 20mm graded stone aggregate, inner plaster 10mm thick in cm 1:4 MS sheet cover with locking arrangement duly painted with two coats of synthetic enamel paint over a coat of primer red oxide. | 1 | Each | |
| 208 | 208 | Supply and Fixing of Air Release Valve (ARV) size 50 mm Dia with two air outlet for fixing up in DI/GI/HDPE water supply pipe line including all necessary arrangement i.e. cutting,drilling,threading of 2.5 mtr long GI pipe 50 mm bore ISI mark medium grade as required at site & testing complete all as specified & directed. | 1 | Each | |
| 209 | 209 | Supply and Fixing of Reflex Valve/NRV/Dual plate check valve, PN 1.6 rating of size 100 mm dia with all necessary accessories and testing complete all as specified & directed. Make - Leader/Sant/Kirlosker | 1 | Each | |
| 210 | 210 | ESE LIGHTINING ARRESTOER: HSN Code- 8535 \nLightning protection system based on Early Streamer Emission (ESE) technology confirming to NFC 17 -102 standerds. Non electronic impulse in the form of streamer into the air microseconds earlier than naturally. | 2 | Each | |
| 211 | 211 | Supply of GI Mast for mounting the terminal &adaptor with ESE Air Terminal. (a) length - 6 Mtr (b) Pipe Jindal, dia - 50 mm, thickness- 3.4 mm, Base plate- (300x300x6) mm and some supporting accessories like fasner, ring fasner, guy wire, tung bakal, huk etc. | 2 | Each | |
| 212 | 212 | Supply of strike counter ( 6 digit) | 2 | Each | |
| 213 | 213 | Supply of single core 70 sqmm copper wire | 40 | RM | |
| 214 | 214 | Supply of advance gel chemical earthingof copper bonded earth rod along with 25 kg of chemical bag. \nEarthing rod;- copper bound steel rod did 17.7 mm, length 3mtr/3000mm | 6 | Each | |
| 215 | 215 | Surface dressing n exc 15 cm deep in soft /loose soil. | 85 | Sqm | |
| 216 | 216 | M&L cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foudation, filling, sub base and mass concrete all as specified. | 1 | Cum | |
| 217 | 217 | M&L for brick work with fly ash bricks (old sized bricks) straight or curved on plan exc 6 m mean radious built in cement mortar 1:6. | 8 | Cum | |
| 218 | 218 | M&L for hardcore of broken stone or boulders gauge n exc 63mm , deposited , spread and levelled in layers nex 15cm thick watered and rammed to a true surface | 12 | Cum | |
| 219 | 219 | M&L for sand filling under floors , cushioning under interlocking tiles or foundations complete all as spfd. | 1 | Cum | |
| 220 | 220 | M&L 75 mm thick cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in sub base flooring all as specified. | 85 | Sqm | |
| 221 | 221 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness ,M-40 Grade using grey cement and pigment vibratory process laid over sand cushioning complete all as specified & directed. complete . | 85 | Sqm | |
| 222 | 222 | M&L for 100 mm thick cement concrete type C-2 ,1:3:6 (20 mm graded aggregate) laid to alternate pannels and making surface even and fair complete all as Eng-in-Charge . | 85 | Sqm | |
| 223 | 223 | M&L for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1: 6 and finished rough for receiving tiles as in dado complete all as specified. | 20 | Sqm | |
| 224 | 224 | M&L for preparing new plastered surfaces and applying two coats of cement base paint on surfaces of walls. | 20 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
