Military Engineer Services-MES has published Addition Alteration Of Training Class Room In Inas 550 Ins Garuda And Other Sanctioned Work Of Age B And R Iii Under Ge Nw Naval Base Kochi. Submission Date for this Tender is 11-02-2021. Building Work Tenders in KOCHI Kerala. Bidders can get complete Tender details and download the document.
NAME OF WORK : ADDITION/ALTERATION OF TRAINING CLASS ROOM IN INAS 550 INS GARUDA AND OTHER SANCTIONED WORK OF AGE B and R III UNDER GE NW NAVAL BASE KOCHI | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Surface dressing n exc 15cm deep in soft/loose soil complete all as specified. | 216 | Square Metre | |
2 | 2 | Excavating in trenches, not exceeding 1.5 m wide andnot exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, water piping and electric cables, pier holes, etc.not exc 10 sq m on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed by Engineert-in-Charge. | 41 | Cubic Metre | |
3 | 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified | 34.5 | Cubic Metre | |
4 | 4 | Removing excavated soil not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point all as specified | 15.5 | Cubic Metre | |
5 | 5 | Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in soft/loose soil complete all as specified | 8 | Each | |
6 | 6 | Dismantling of Wall or ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc , keep in safe custody for reuse complete all as specified and directed. | 30 | Square Metre | |
7 | 7 | Demolition of brickwork or stone/boulder masonry or PCC block masonry built in cement mortar including all quoins,pillars etc excluding ashlar facing,dressed stone work and pre cast concrete articles and pre cast concrete block walling complete all as specified and as directed . | 4 | Cubic Metre | |
8 | 8 | Dismantling floor hearth or wall tiling including cement mortar bedding removing serviceable tiles to store & rubbish off the premises complete all as specified. | 48 | Square Metre | |
9 | 9 | Taking down chowkats or frames with shutters (without taking off shutters from frames) exc 1.50 sq. m but not exc 4 Sqm each all as specified | 2 | Each | |
10 | 10 | Dismantiling wrought iron or mild steel work of any description not otherwise provided for all as specified | 3 | Qtl | |
11 | 11 | Taking down old damage cement plaster of any description racking out joints hacking for key, scrubbing down with water complete all as specified and as directed by Engineer-in-Charge | 50 | Sqm | |
12 | 12 | M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed | 65 | Cubic Metre | |
13 | 13 | M&L for hardcore of broken stone of boulders gauge exc. 63 mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed . | 32.3 | Cubic Metre | |
14 | 14 | M&L for cement concrete work in pavement/ hard-standing of flexural strength 40\nkg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 30 cm or less complete all as specified and as directed . | 34.5 | Cubic Metre | |
15 | 15 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' , complete all as specified and as directed | 30 | 10 Running Metre | |
16 | 16 | M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base to floor complete all as specified and directed . | 100 | Square Metre | |
17 | 17 | M&L for coarse aggregate for granolithic floors, graded from 12.5mm to 4.75 mm, spread and levelled in layers n exc. 25 cm thick, watered and rammed to a true surface complete all as specified and as directed . | 5 | Cubic Metre | |
18 | 18 | M&L for Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment all as specified | 100 | Square Metre | |
19 | 19 | M&L for Plain Cement Concrete 1:2:4, type B0 using 12.5mm graded stone aggregate as in mass concrete arround the sides of paver blocks or chamfered edges, top of wall etc including necessary form work complete all as specified and as directed . | 1 | Cubic Metre | |
20 | 20 | M&L for pre-cast cement concrete block masonry 1:3:6 Type C1, using 20mm graded aggregate with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed . | 4 | Cubic Metre | |
21 | 21 | M&L for providing PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, parapets and railings, copings, bed plates, kerbs, etc including necessary form work complete all as specified | 0.4 | Cubic Metre | |
22 | 22 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified | 400 | Kilogram | |
23 | 23 | S&F MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified | 120 | Kilogram | |
24 | 24 | M&L for applying two coats of synthetic enamel paint over a coat of metal primer including preparation on new steel surface exceeding 10 cm width or girth all as specified and as directed | 20 | Square Metre | |
25 | 25 | S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, ridge/valley etc, fixed with self tapping screws as complete all as specified . | 40 | Square Metre | |
26 | 26 | S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, ridge/valley etc, fixed with self tapping screws as specified | 4 | Square Metre | |
27 | 27 | M&L for 100 mm thick Cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in sub base all as specified and directed . | 4 | Square Metre | |
28 | 28 | M&L for non skid glazed ceramic coloured tiles of size 450x350x 7 mm thick (square / rectangular) area as in verticle surfaces, set & jointed in neat cement slurry & pointed in white or coloured cement to match including 10mm thick rendering cement plaster in cement mortar 1:3 complete all as specified | 4 | Square Metre | |
29 | 29 | M&L for non skid glazed ceramic coloured tiles of size 450x350x 7 mm thick (square / rectangular) area as in floors surfaces, set & jointed in neat cement slurry & pointed in white or coloured cement to match including 15mm thick screed bed in cement plaster in cement mortar 1:4 complete all as specified | 16 | Square Metre | |
30 | 30 | M&L for vitrified ceramic coloured tiles, 10 mm thick (square / rectangular), polished, area of each tile not exc 0.36 sqm, laid in floors etc. set & jointed in with suitable chemicals in existing floor & pointed in white or coloured cement to match complete all as specified and as directed . | 48 | Square Metre | |
31 | 31 | M&L for virified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and as directed. | 3 | Square Metre | |
32 | 32 | S&F Cast iron floor trap, 100mm bore with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified | 1 | Each | |
33 | 33 | S&F Cast iron nahani trap, 100mm bore with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) | 1 | Each | |
34 | 34 | S&F in repairs for vitreous china urinal, coloured, half stall typeincluding providing and fixing plugs, bedding urinal against wall in Cement Mortar 1:2, securing urinal to plugs with and including 60mm long Brass Screws, pointing around Urinal back in Cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe including cutting making good the wall and floors wherever required complete all as specified and as directed. | 3 | Each | |
35 | 35 | M&L for rendering 10mm thick cement plaster in cement mortar (1:6) on brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and as directed. | 40 | Square Metre | |
36 | 36 | M&L for 15mm thick rendring in cement mortar 1:4 on brick or PCC block masonry/concrete surface finished even and fair complete all as specified and directed | 50 | Sqm | |
37 | 37 | M&L for preparation of new and old plastered surfaces of wall and applying two coat of Apex ultima protek top coat a coat of protek base coat complete all as specified and as directed by Engineer-in-Charge. | 200 | Sqm | |
38 | 38 | M&L for preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over 3 mm thick wall care putty complete all as specified and directed | 40 | Square Metre | |
39 | 39 | S&F anodised aluminium powder coated frame work for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc.complete all as specified (minimum thickness of powder coating 50 micron). | 15 | Kilogram | |
40 | 40 | S&F anodised aluminium powder coated (thickness of pwder coating not less than 50 micron) door shutters, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleat, glazing with clips, rubber neoprene packing, anodised aluminium snap beading, 02 Nos handle in each door, hinges, screws etc including necessary locking arrangement complete all as specified. Note : Glazing/wire mesh shall be measured and paid separately. | 4 | Square Metre | |
41 | 41 | S&F 5.5 mm thick plain sheet glass ordinary quality fixed to aluminium or wooden frame work using necessary beadings etc exc 0.50 Sqm in each pane complete all as specified and as directed . | 2 | Square Metre | |
42 | 42 | S&F 12 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination fixed in aluminium frame work complete all as specified | 2 | Square Metre | |
43 | 43 | S&F aluminium (Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified | 2 | Each | |
44 | 44 | S&F second class hard wood plain fillets square ,rectangular any section clean sawn, secured with screws fixed to walls, sectional area exc 13 sqcm and n exc 25 sqcm complete all as specified and as directed. | 300 | Running Metre | |
45 | 45 | S&F second class hard wood plain fillets square ,rectangular any section clean sawn, secured with screws fixed to walls, sectional area exc 03 sqcm and n exc 06 sqcm complete all as specified and as directed. | 300 | Running Metre | |
46 | 46 | M&L for preparation of surfaces of wood and wood based materials, new or old of any description and girth not other wise described and treated with creosote complete all as specified and as directed | 60 | Square Metre | |
47 | 47 | M&L for preparing new perforated celing surface and applying two coats of oil bound distemper over a coat of suitable primer complete all as specified and directed | 132 | Square Metre | |
48 | 48 | M&L for 40 mm thick bonded mineral wool blanket slab made from glass density 24 kg/cum and fixed as per manufacturer’s instructions complete all as specified and as directed | 132 | Square Metre | |
49 | 49 | M&L for 12 mm thick perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with screws to timber frame work or with staples on walls complete all as specified and as directed | 84 | Square Metre | |
50 | 50 | M&L for 12 mm thick perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified and as directed | 48 | Square Metre | |
51 | 51 | S&F interlocking aluminium alloy anodized snap grid for ceiling consists of main Tee runners of size 38mm x 25mm x 1.5mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Tee 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 32mm x 32mm x 1.5mm. Aluminium alloy extruded section shall be aluminium anodized (minimum 15 micron) and shall conform to IS-733, IS-1285 and IS-737 complete all as specified and as directed. | 48 | Square Metre | |
52 | 52 | M&L for 100 mm thick Cement concrete (1:2:4) type B-2, ( using 40mm graded aggregate) as in floor to raise platform complete all as specified and as directed . | 5 | Square Metre | |
53 | 53 | M&L for 15 mm thick screed bed or bedding layer or mortar in CM (1: 4 ) for laying in floor finishes all as specified and directed . | 52 | Square Metre | |
54 | 54 | Supply only 5 litres automatic flushing cistern with brackets complete all as specified and as directed. | 1 | Each | |
55 | 55 | Supply only PVC Low Level Flushing Cistern 10 Litre capacity, White, valveless, symphonic action type, with Inlet, Ball Valve, Float and Handle, fixing brackets and connections to pipes complete all as specified and as directed by Engineer -in-Charge . | 1 | Each | |
56 | 56 | S&F 32 mm dia PVC flushing pipe of suitable length 800 mm long including necessary jointing material etc complete all as specified and as directed by Engineer -in-Charge . | 1 | Each | |
57 | 57 | S&F in repair vitreous china white wash down water closet pan (pedestal pattern) with trap and fixing bolts (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc.including PVC seat cover complete all as specified and as directed. | 1 | Each | |
58 | 58 | S&F 110mm bore PVC (SWR) P trap | 1 | Each | |
59 | 59 | S&F Vitreous China White Wash Hand Basin, size 550x400mm (Flat Back type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted/erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3, complete all as specified and as directed. | 1 | Each | |
60 | 60 | S&F Mirror 600x450mm, Beveled Edge, Selected quality Glass, mounted on 6.0mm thick AC Building Board or Commercial Plywood and fixed to Wooden Plugs with Chromium plated Brass Screws and Cup Washers and fixed, complete all as specified and as directed. | 1 | Each | |
61 | 61 | S&F Brass Chromium Plated Tubular Towel Rail, 20mm dia, D type, 60 Cm long between Flanges and fixed, complete all as specified and as directed. | 1 | Each | |
62 | 62 | S & F vitreous china soap dish, white approximate size 160x160x90mm embedded in the wall as specified and as directed. | 1 | Each | |
63 | 63 | M&L 150mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars | 16 | Running Metre | |
64 | 64 | M&L concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested; in plain cement concrete Type D2, 1:4:8 using 40mm graded aggregate for 300mm bore pipe complete all as specified. | 16 | Running Metre | |
65 | 65 | M&L for cement concrete 1:2:4, type B1, using 20 mm graded stone aggregate inhaunching in side manholes and drains all as specified | 0.3 | Cubic Metre | |
66 | 66 | M&L for providing, precast cement concrete 1:2:4, type B1, using 20 mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, shelves and similar articles with plain face window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, including chamfers weatherings, throating etc. and setting in mortar (1:6 ) complete with joints to match all as specified (Note : Reinforcement shall be measured and paid separately) | 0.4 | Cubic Metre | |
67 | 67 | M&L for Mild steel TMT bars 10mm dia and over as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with andincluding mild steel wire (annealed) not less than 0.9mm dia or securing with clip all as specified and directed . | 50 | Kilogram | |
68 | 68 | M&L for Mild steel TMT bars 6 to 8mm dia and over as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with andincluding mild steel wire (annealed) not less than 0.9mm dia or securing with clip all as specified and directed . | 12 | Kilogram | |
69 | 69 | M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, helical stirrups, spacers and binders as in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with andincluding mild steel wire (annealed) not less than 0.9mm dia or securing with clip all as specified and directed . | 30 | Kilogram | |
70 | 70 | M&L for hume pipe septic tank 50 users capacity including AC vent pipe, earth work excavation in soft/loose soil, erecting hume pipe septic tank in position, PCC 1:4:8 and all other accessories required such as vent cowl etc and making good the disturbed surface and removing surplus soil and old u/s septic tank, complete incl connecting to the sewer line and soackage pit etc complete all as per drg No TD/A/57 sheet :1/1 ) all as specified and directed . . | 1 | Job | |
71 | 71 | M&L for soackage pit for 50 users capacity including earth work, excavation in soft/loose soil, removal of surplus spoil, with RCC slab complete filled with brick bats line etc complete all as per drg No TD/A/61 sheet :1/1 ) all as specified and directed . | 1 | Job | |
72 | 72 | S&F railing vertical and hirizontal membes fixed in floor/wall suitable base plate including all fixing arrangements and end cap etc. With 304 grade including cutting, welding, drilling, complete all as specified and as birected by Engineer-in-Charge | 1600 | Kg | |
73 | 73 | S&F stainless steel end cap/knobs and ornament suitable for itme No 1 complete all as specified and as directed by Engineer-in-Charge. | 400 | Each | |
74 | 74 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting sheet metal encl. with plug & socket etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. | 31 | Per Point | |
75 | 75 | M&L , point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross sectional area, copper conductor unsheathed FRLS cable 1100 Volts grade ISI-694 marked with valid CML No. single core multistranded cable in and including medium grade concealed PVC conduit not less than 20mm dia and accessories ISI marked with valid CML No (IS-9573-1983 for conduits and IS: 3419: 1976 for conduit accessories) and including 1.6 mm thick MS sheet/ pressed steel sunken boxes depth not less than 50mm (earth dolly) duly painted with two coats of anti corrosive paint / aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paints over a coat of red oxide primer externally covered with 3 mm thick plastic laminated sheet cover for fixing of switches sockets and fan regulators etc. including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLS cable single core multistranded cable as earth continuity wire all as specified and as directed for One light point controlled by one switch\n\n | 8 | Point | |
76 | 76 | All as per item No 76 here-in-before but for One fan point / exhaust fan point controlled by one switch & regulator | 3 | Point | |
77 | 77 | All as per item No 76 here-in-before but for One 5 pin 5 Amps Socket point controlled by one switch on same board. | 6 | Point | |
78 | 78 | All as per item No 76 here-in-before but for One 5 pin 5 Amps socket point controlled by one switch on independent board. | 10 | Point | |
79 | 79 | All as per item No 76 here-in-beforebut with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable as earth wire for one 6 Pin 16 Amps Socket outlet on independent board. | 2 | Point | |
80 | 80 | All as per item No 76 here-in-before but with 4 Sqmm copper conductor including 4.0 Sqmm copper cable on earth wire for sheet metal enclosure | 2 | Point | |
81 | 81 | S&F modular switch 1 way 6 Amps,1 module complete all as specified | 27 | Each | |
82 | 82 | S&F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified | 11 | Each | |
83 | 83 | S&F socket modular 6 Amps and 2/3 pin combined 2 module complete all as specified | 16 | Each | |
84 | 84 | S&F Modular socket 6 A/16 A - 2/3 pin combined 2 module complete all as specified | 2 | Each | |
85 | 85 | S&F switch 15 A One way SP modualr type complete all as specified | 2 | Each | |
86 | 86 | S&F fan regulator modular step type 120 W 2 module complete all as specified | 3 | Each | |
87 | 87 | S&F MCB 'C' Curve 100 Amp Three pole, 415 Volts, Make L&T Cat Part No. AU15S31003C all as specified and directed . | 1 | Each | |
88 | 88 | S&F MCB 'B' Curve 40 Amp SPN ,240 Volts Make L&T Cat Part No. BB20320B all as specified and directed. | 1 | Each | |
89 | 89 | S&F MCB 'B' Curve SP 6 To 32 Amp , 240 Volts,Make L&T Cat Part No. BB10100B to BB10320B, all as specified and directed. | 6 | Each | |
90 | 90 | S&F MCB SP B series 6-32 Amp, as per cat part No DHMGBSPF006-032 of Make : Havells, L & T, Indo asian | 34 | Each | |
91 | 91 | S&F ceiling fans 1200 mm sweep of BLDC type at any location as directed and connecting to the existing electrical system all as specified and directed. Make Crompton cat part no. ENERGION HS-5Star (BLDC) or Bajaj/USHA all as specified and directed. | 3 | Each | |
92 | 92 | S&F LED down lighter 2'x2' elegant slim panel, 36/40 W 240 volt all as per specified and directed. Make Luker Cat Part No. LPS-40 or Philips/ Crompton complete all as specified | 8 | Each | |
93 | 93 | S&F LED flood light with all fixing arrangements of 100 Watt complete all as specified and as directed. Make : Luker Cat Part No LFLSL100 | 5 | Each | |
94 | 94 | S&F Sheet metal enclosures with socket plug top and MCB' single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB complete all as specified | 2 | Each | |
95 | 95 | S&F Sheet metal enclosure for DBs double door type 8 way with 200 Amps rated busbar all as specified and directed. | 1 | Each | |
96 | 96 | Supply, install, test and commissioning split type Air-conditioner single phase electric driven cooling capacity 1.5 TR (4500K Cal/hr) indoor and outdoor complete with cordless remote control unit, hidden LED display, super test filter multi fold evaporator, eco-friendly refrigerant auto restart and self diagnosis function with 3 star inverter rating and factory made stand for ODU complete all as specified and directed. Make Voltas (ISEER 3 star) | 2 | Each | |
97 | 97 | M&L for submain wiring with 2 single core 6 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn throgh and including PVC rigid conduit concealed wiring inculding necessary PVC conduit specials including chases cutting complete exceapt beam and RCC roof and one run of 6Sqmm PVC insulated unshearthed single core 1100 volts grade multistranded copper conductor cable as earth continuity conduto9r and connceting with suitable size thimble complete allas specified and as directed. Note: two run of 6 sqmm size PVE cable , one run of 6 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length | 25 | RM | |
98 | 98 | Supply and spread dry natural river sand for cushioning and covering of UG cables in trenches all as specified (Note : For measurement purpose only punned thickness shall be measured and paid) | 10 | Cubic Metre | |
99 | 99 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 flat, size 250mm x 150mm x 40mm laid dry and abutting each other with gap between adjacent slab not exceeding 10mm over underground cable for cable protection in trenches all as specified . \n | 650 | Each | |
100 | 100 | Supply, lay, joint and test XLPE cable insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100V grade with screened aluminium conductor of size 4 core 10 Sqmm all as specified . \n | 100 | RM | |
101 | 101 | Supply, lay, joint and test cable XLPE insulated screened PVC badded, galvanised steel strip or wire armoured electric cable 2 core 10 Sqmm (heavy duty) with stranded aluminium conductors, 1100 volts grade all as specified and directed by Engineer-in-Carge | 250 | RM | |
102 | 102 | Material and labour for common burnt clay building bricks sub-class 'B' designation of size 230x110x75mm complete all as specified and directed | 495 | Each | |
103 | 103 | S&F MCCB 40 Amps 4 pole breaking capacity 16 KA at 415 V, 50 Hz with sheet metal enclosures complete all as specified and directed. | 1 | Each | |
104 | 104 | S&F CPVC pipe SDR 13.5 and plain CPVC SDR 11 fittings of size 25 mm outer dia on wall/floor complete all as specified. | 40 | Running Metre | |
105 | 105 | S&F CPVC pipe SDR 13.5 and plain CPVC SDR 11 fittings of size 20 mm outer dia on wall/floor including taking down old pipes all as specified | 20 | Running Metre | |
106 | 106 | S&F 500 litres rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position of capacity complete all as specified and directed at site | 1 | Each | |
107 | 107 | S&F15mm bore chromimum plated angle valve, quarter turn with flange for fixing to CPVC pipe and taking down old one, complete all as specified and as directed. Make Cera cat Part F2004201 of CERA or equivalent in Prayag/Hindware. | 3 | Each | |
108 | 108 | S&F 15mm bore chromimum plated Bib taps, fancy type, hald turn, fancy type long body, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mmbore GI/CPVC pipecomplete all as specified and as directed. Make Cera cat Part F2004152 of CERA or equivalent in Prayag/Hindware. | 2 | Each | |
109 | 109 | S&F health faucet ABS body with wall hook and 1m SS braided rubber hose pipe including taking out old one complete all as specified and as directed. Make Cera cat Part F8030102 of CERA or equivalent in Prayag/Hindware. | 1 | Each | |
110 | 110 | Supply, fixing in replacement post/wall top light made out of die cast aluminium housing with clear PC diffuseras per desigh of manufacturer with IP-44 protection and of 6 W capacity with inbuilt LED of wrm colour, including taking down old light fitting complete all as specified and directed. Make : Jaquar or Bajaj/Havells | 34 | Each | |
111 | 111 | Supply and fixing and connecting electrically with 1.5 Sqmm 3 Core PVC insulated PVC sheathed copper conductor multistranded through PVC conduit up to light fittings and kiox box complete all as specified and as directed. | 20 | RM | |
112 | 112 | S&F junction box made of galss fibre reinforced and transparent poly carbonate of size 126x228x111mm, KVPC8104 with IP 66 protection including cable connector and suitable size clamps fixing for pole/in pcc foundation including taking down old unserviceable fitting complete (Make : Hensel) | 34 | Each | |
113 | 113 | S&F timer box complete including 32 Amp 3 pole contactor, digital time switch indicator, bypass switch, cable connectors (Make: Havells Cat part No IHXSS0106A or equivalent in L & T, Legrand) all as specified and as directed | 1 | Each | |
114 | 114 | S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in onduit/pipe or fixed to poles or any otherindicated situation for loop earthing 20x3 mm copper strips specified and directed. | 30 | RM | |
115 | 115 | Test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 Nos, 8mm dia 25mm long hex. Head screw including junction boxes | 2 | Each | |
116 | 116 | S&F 50mm bore GI tubing medium grade as pole for fixing Flood Lights with necessary clamps, fixing arrangement, excavation, PCC etc including painting complete all as specified and as directed | 30 | RM | |
117 | 117 | S&F 40mm bore GI tubing light grade of with all fittings laid in trenches/underfloor/onwalls with necessary clamps etc. complete all as specified and directed. | 10 | RM | |
118 | 118 | S&F single phase junction box of Make Syntex with two aluminium bus bar & one number MCB 6 Amps complete all as specified and directed | 5 | Each | |
119 | 119 | S&F PVC cable 2x2.5 Sqmm single core multistranded from junction box to the LED flood light complete all as specified and directed | 40 | RM | |
120 | 120 | M&L Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel including earth work, excavation on any type soil and removal of surplus soil to a distance of 50 mtr, PCC 1:2:4 type B1 for earth pit cover 6 Nos 8mm dia CTD bar earth lead protection GI pipe medium grade 20mm size from earth plate electrode to main switch board all as shown in electrical plate No 5 of SSR Part-I connected to earthing test point all as specified and indicated including testing on completion | 1 | Each Set | |
121 | 121 | M&L for earthing as in repair complete with galvanised iron earth plate electrode 600mm x 600 mm x 6 mm thick, burried directly and preferably vertically in gournd, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below grouund level connected with galvanised strip of size 32 x 6mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earting lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and othe end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15 cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work. | 2 | Each | |
122 | 122 | M&L for chemical earting complete with copper plate size 90x60x5mm burried 3 Mtr length directly in ground and filled with back filling compound conforming to is 3043-1987 connected to copper strip fo size 32x6mm by means of bolts, nuts and washers made out of brass and connected to test point including necessary Excavation earth work and PCC 1:3:6 type C1 chamber 40mm thick RCC cover completer all as chemical earthing manufacture as per recommended in relevant ES code of practice. Note : Rate quoted deemed to including the cost of copper earthing strip 32x6mm and protection pipe upto 7.5 met length with complete earthwork. | 2 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail