}

Repairs Resurfacing Of Roads At Ins Kalinga , Ins Karna And Nad Bheemunipatnam, GE P N Kalinga-Andhra Pradesh

Military Engineer Services-MES has published Repairs Resurfacing Of Roads At Ins Kalinga , Ins Karna And Nad Bheemunipatnam. Submission Date for this Tender is 01-03-2021. Road Repair Tenders in GE P N Kalinga Andhra Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

26709791
Corrigendum : Repairs Resurfacing Of Roads At Ins Kalinga , Ins Karna And Nad Bheemunipatnam
Open Tender
Indian
Andhra Pradesh
GE P N Kalinga
01-03-2021

Tender Details

Repairs Resurfacing Of Roads At Ins Kalinga , Ins Karna And Nad Bheemunipatnam

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 08-Feb-2021 tender amendments Other 22-02-2021
2 22-Feb-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 01-03-2021

Key Value

Document Fees
INR 1000 /-
EMD
INR 128500.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: REPAIRS/RESURFACING OF ROADS AT INS KALINGA,INS KARNA & NAD, BHEEMUNIPATNAM.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 M&L for repairs to pot holes any depth, not exc. 1 sqm each including sweeping, free from dust and mud, or water scoring sunken surfaces in roads, paths etc., cutting around edges to atleast 25 mm in depth, making good by applying tack coat with paving bitumen of grade VG-30 @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder of paving bitumen of grade VG-30, 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of pot holes exc 30 mm complete all as specified. 4.1 10 Sqm
2 2 Surface excavation n.exc. (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified. 530 Sqm
3 3 Removing excavated meterial to a distance exc.500 m but not exc.1.5 Km and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified. 79.5 Cum
4 4 M&L Moorum /red bajri filling 100 mm spread thickness,rolled and consolidated to gradient and camber required, complete all as specified. 53 10 Sqm
5 5 M&L for 150 mm thick in two layer of 75 mm thick each layer (compacted thickness) WBM, with coarse aggregates by using granite trap or basalt of grading 2 (63 to 40 mm size) or of grading 3 ( 50 to 20 mm size) spread, rolled and consolidated to gradient and camber required, complete all as specified. Note:- Unit rate quoted shall be for 150 mm compacted thickness 8.9 10 Sqm
6 6 M&L Preparing un surfaced WBM road surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the clearned surface with gunny bags to remove all loose dirt etc,complete all as specified and directed. 8.9 10 Sqm
7 7 M&L Applying evenly a priming / tack coat with paving bitumen VG -30 at 10 Kg per 10 Sqm complete all as specified. 8.9 10 Sqm
8 8 M&L Preparing black top surfaces of road by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed. 1597 10 Sqm
9 9 M&L Applying evenly a priming / tack coat with paving bitumen VG -30 at 5 Kg per 10 Sqm complete all as specified. 1597 10 Sqm
10 10 M&L for laying 30 mm consolidated thickness bituminous premix semi dense asphaltic concrete with 5.5% binder content with paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient by using hot mix plant and mechanical paver equipment complete all as specified and directed. Note: If actual design mix comes less than 5.50% binder content,then the rate of recovery of bitumen shall be as per rate in purchase voucher per each kg for the purpose of adjustment. However, no adjustment shall be made if the binder content is more than 5.5%. 1606 10 Sqm
11 11 M&L for road marking strips, lines, dashes, arrows, letters etc., of 2.5 mm thick (reflective type) on new surfaces of road / pavements and the like including and exceeding 10 cm wide with hot thermo plast material @ 5Kg/ sqm of white or golden yellow, by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater etc., driven by the skilled operator on road surface complete all as per MORTH specifications and as directed. 555 Sqm
12 12 S&F Dual directional reflective cat eye (Road Glow sutd) of impact resistant ABS plastic 100 x 90 x 16 mm of ultra voilet resistant yellow colour, having micro prismatic / cube corner reflectors suitable for fixing with epoxy / bitumen adhesive as per manufacturer's specification / instructions complete all as specified and as directed. Make: 3M/Dark eye as approved by GE.\n[Note : Appropriate epoxy adhseive on the road surface shall be provided as per manufacturers specifications / instructions before fixing the cat eye and the same is deemed to be included in the unit rate quoted. ] 700 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail