Forest Department-FD has published Estimate For The Cost Of Renovation Of Staff Quarters Nond . B-10 At Division Office Compound In Nilambur Range Under Nilambur North Division During 2020-21. Submission Date for this Tender is 30-01-2021. Building Work Tenders in N Kerala. Bidders can get complete Tender details and download the document.
Name of Work:Estimate for the cost of renovation of Staff Quarters No:ND/B-10 at Division Office Compound in Nilambur Range under Nilambur North Division during 2020-21 | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:\nOf area 3 sq. metes and below | BI01010001010000000000000515BI0100001113 | 4 | each |
2 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.\nAll kinds of soil\n | BI01010001010000000000000515BI0100001114 | 0.244 | Cum |
3 | 3 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.\nHot finished welded type tubes \n\n\n | BI01010001010000000000000515BI0100001115 | 227.741 | kg |
4 | 4 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.\n | BI01010001010000000000000515BI0100001116 | 39.08 | sqm |
5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:\n1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001117 | 0.244 | cum |
6 | 6 | Providing and fixing in position factory made precast RCC M-40 doors and win frames having excellent smooth finish as per IS:6523 with reinforcement of 3 Nos, 6 mm dia main bars tied with 3 mm M.S stirrups placed @ 200 mm CC nad 6 numbers high strength polymer blocks of required size for fixing hinges including providing 6 no specially designed M.S galvanised sleeves for accomodating 6 mm dia fully threaded bolts for fixing hold fast on vertical members, providing suitable arrangement for receiving sliding door bolts and tower bolt etc all complete, as per the direction of Engineer in charge. (The cost of hold fast and cc block of 1:3:6 mix is also included in the item.) The frame shall be measured in running meter correct to two places of decimal.\nDoor frame 100 mm x 60 mm. | BI01010001010000000000000515BI0100001118 | 27.4 | Mtr |
7 | 7 | Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.\nFixed to openings/ wooden frames with rawl plugs screws etc | BI01010001010000000000000515BI0100001119 | 75.161 | kg |
8 | 8 | Providing and fixing glazed shutters for door, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. Pressed butt hinges bright finished of required size with necessary screws.\nSecond class teak wood\n35 mm thick \n | BI01010001010000000000000515BI0100001120 | 4.86 | sqm |
9 | 9 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:\nCement mortar 1:4 ( 1 cement: 4 coarse sand) | BI01010001010000000000000515BI0100001121 | 4 | sqm |
10 | 10 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.\nFor thickness of tiles 10 mm to 25 mm | BI01010001010000000000000515BI0100001122 | 2.875 | sqm |
11 | 11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. \n | BI01010001010000000000000515BI0100001123 | 2.875 | sqm |
12 | 12 | Engaging Carpenter for damaged doors and windows Etc. | BI01010001010000000000000515BI0100001124 | 1 | each |
13 | 13 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:\nOne or more coats on old work | BI01010001010000000000000515BI0100001125 | 259.599 | sqm |
14 | 14 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:\nOne or more coats on old work | BI01010001010000000000000515BI0100001126 | 48.916 | sqm |
15 | 15 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall \n | BI01010001010000000000000515BI0100001127 | 10 | mtr |
16 | 16 | Maintenance of Electrical works including Changing of switch boards, rewiring of damaged wires including labor charges and materials,etc… | BI01010001010000000000000515BI0100001128 | 1 | LS |
17 | 17 | Provision for GST payments(in 12%) | BI01010001010000000000000515BI0100001151 | 1 | L.S |
18 | 18 | Lumpsum for round | BI01010001010000000000000515BI0100001152 | 1 | Ls |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail