}

Development Of Park Sector -82 , Pocket -12 ( Sh Open Gym With Five Year Maintenance . ), NOIDA-Uttar Pradesh

New Okhla Industrial Development Authority-NOIDA has published Development Of Park Sector -82 , Pocket -12 ( Sh Open Gym With Five Year Maintenance . ). Submission Date for this Tender is 28-01-2021. gymnasium Tenders in NOIDA Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

26703831
Development Of Park Sector -82 , Pocket -12 ( Sh Open Gym With Five Year Maintenance . )
Open Tender
Indian
Uttar Pradesh
NOIDA
28-01-2021

Tender Details

development of Park Sector -82 , Pocket -12 ( Sh Open Gym With Five Year Maintenance . )

Key Value

Document Fees
INR 2124 /-
EMD
INR 62000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: -D/o Park Sector -82 , Pocket -12 (Sh: Open Gym with five year maintenance. )
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Air Walker: Providing, designing and fixing of Air-Walker of size 1100 x 550 x 1480mm fabricated with main post of 114mm dia and 2.5mm thick and other pipes of 40mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour as approved by Engineer in charge. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by Engineer-in-charge. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment,\ncolour (of metal, seat and pedal), and fixing of\n equipment etc (the cement concrete \nand excavation work shall be paid separately).\n BI01010001010000000000000515BI0100001112 1 Each
2 2 Sit Up Station: Providing, designing and fixing of double sit-up station of size 1500 x 1150 x 650mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational\nmoulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate.\nAll complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc.\n (the cement concrete and excavation work shall\n be paid separately).\n BI01010001010000000000000515BI0100001113 1 Each
3 3 Air Swing: Providing, designing and fixing of air swing in pair of size 1150 x 900 x 1250mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. \n The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work \nshall be paid separately).\n BI01010001010000000000000515BI0100001114 1 Each
4 4 Horse rider station: Providing, designing and fixing of horse rider station of size 1000 x 600 x 1100 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury. Base plate cover and seat to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on \nground with concrete of minimum strength M-25 and J shape \nwelded bolt and once the concrete is set, fix the equipment on to it\n and cover with the base plate. All complete as per direction and\n approval of engineer-in-charge regarding material, shape of \nequipment, colour on metal, seat and base cover plate cover and\n fixing of equipments etc (the cement concrete and excavation \nwork shall be paid separately). \n BI01010001010000000000000515BI0100001115 1 Each
5 5 Stair Stepper: Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 1000 x 800 x 1400 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder\ncoated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edges to\nprevent any impact of injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with\ninbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The \nequipment to be fixed on ground with concrete of minimum \nstrength M-25 and J shape welded bolt and once the concrete is \nset, fix the equipment on to it and cover nuts and bolts with the \nbase plate. All complete as per direction and approval of engineer\n- in-charge regarding material, shape of equipment, colour on \nmetal, seat and base cover plate and fixing of equipments etc (the\n cement concrete and excavation work shall be paid separately).\n\n BI01010001010000000000000515BI0100001116 1 Each
6 6 Leg Press: Providing, designing and fixing of leg press of size 2000 x 550 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high quality grip rubber on top end. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearingused shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/ LLDPE \ncaps for user safety. The equipment to be fixed on ground with \nconcrete of minimum strength M-25 and J shape welded bolts and\n once the concrete is set, fix the equipment on to it and cover nuts\n and bolts with the base plate. All complete as per direction and \napproval of engineer-in-charge regarding material, shape of \nequipment, colour on metal, seat and base cover plate and fixing\n of equipments etc (the cement concrete and excavation work \nshall be paid separately). BI01010001010000000000000515BI0100001117 1 Each
7 7 Pull chair: Providing, designing and fixing of pull chair in a pair of size 2500 x 800 x 2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber on top end. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE\n caps for user safety. The equipment to be fixed on ground with\n concrete of minimum strength M-25 and J shape welded bolt and\n once the concrete is set, fix the equipment on to it and cover with\n the base plate. All complete as per direction and approval of \nengineer-in-charge regarding material, shape of equipment, colour\n on metal, seat and base cover plate and fixing of equipments etc\n (the cement concrete and excavation work shall be paid \nseparately). BI01010001010000000000000515BI0100001118 1 Each
8 8 Exercising bar: Providing, designing and fixing of exercising bar in a pair of size 1800 x 550 x 1700 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per direction and approval of engineer-in-charge regarding material,\nshape of equipment, colour on metal, seat and base pedal and \nfixing of equipments etc (the cement concrete and excavation \nwork shall be paid separately).\n BI01010001010000000000000515BI0100001119 1 Each
9 9 Seated chest press: Providing, designing and fixing of seated chest press in a pair of size 1800 x 700 x 2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental riendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps\n for user safety. The equipment to be fixed on ground with \nconcrete of minimum strength M-25 and J shape welded bolt and\n once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per direction and approval of \nengineer-in-charge regarding material, shape of equipment, colour\n on metal, seat and base plate and fixing of equipments etc (the \ncement concrete and excavation work shall be paid separately).\n\n BI01010001010000000000000515BI0100001120 1 Each
10 10 Arm wheel: Providing, designing and fixing of arm wheel in a pair of size 850 x 800 x 1800 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury and base plate\ncover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps\n for user safety. The equipment to be fixed on ground with \nconcrete of minimum strength M-25 and J shape welded bolts and\n once the concrete is set, fix the equipments on to it and cover \nwith the base plate. All complete as per direction and approval of \nengineer-in-charge regarding material, shape of equipment, colour\n on metal, seat and base plate and fixing of equipments etc (the \ncement concrete and excavation work shall be paid separately).\n\n BI01010001010000000000000515BI0100001121 1 Each
11 11 Elliptical exerciser: Providing, designing and fixing elliptical exerciser of size 1200 x 540 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed\nand self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed\n by GI/ LLDPE caps for user safety. The equipment to be fixed on\n ground with concrete of minimum strength M-25 and J shape \nwelded bolts and once the concrete is set, fix the equipments on\n to it and cover with the base plate. All complete as per \ndirectionand approval of engineer-in-charge regarding material, \nshape of equipment, colour on metal, seat and base plate and \nfixing of equipments etc (the cement concrete and excavation \nwork shall be paid separately).\n\n BI01010001010000000000000515BI0100001122 1 Each
12 12 Double cross walker: Providing, designing and fixing double cross walker of size 1600 x 600 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted \nmovement. All open ends of pipe to be closed by GI/ LLDPE caps\nfor user safety. The equipment to be fixed on ground with concrete\n of minimum strength M-25 and J shape welded bolts and once \nthe concrete is set, fix the equipments on to it and cover with the \nbase plate. All complete as per direction and approval of engineer\n-in-charge regarding material, shape of equipment, colour on \nmetal, seat and base pedal and fixing of\nequipments etc (the cement concrete and excavation work shall \nbe paid separately).\n\n 1 Each
13 13 Twister: Providing, designing and fixing twister of size 1700 x 1300 x 1300 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of\n80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps\n for user safety. The equipment to be fixed on ground with \nconcrete of minimum strength M-25 and J shape welded bolts and\n once the concrete is set, fix the equipments on to it and cover \nwith the base plate. All complete as per direction and approval of\n engineer-in-charge regarding material, shape of equipment, colour\n on metal, seat and base pedal and fixing of equipments etc (the \ncement concrete and excavation work shall be paid separately).\n\n 1 Each
14 14 Rowing machine: Providing, designing and fixing rowing machine of size 1280 x 800 x 1150 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base plate\ncover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps\n for user safety. The equipment to be fixed on ground with \nconcrete of minimum strength M-25 and J shape welded bolts and\n once the concrete is set, fix the equipments on to it and cover \nwithn the base plate. All complete as per direction and approval of\n engineer-in-charge regarding material, shape of equipment, colour\n on metal, seat and base pedal and fixing of equipments etc (the \ncement concrete and excavation work shall be paid separately).\n\n 1 Each
15 15 Bridge Ladder: Providing, designing and fixing bridge ladder of size 2750 x 1000 x 1500 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base plate\ncover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps\n for user safety. The equipment to be fixed on ground with \nconcrete of minimum strength M-25 and J shape welded bolts and\n once the concrete is set, fix the equipments on to it and cover \nwithn the base plate. All complete as per direction and approval of\n engineer-in-charge regarding material, shape of equipment, colour\n on metal, seat and base pedal and fixing of equipments etc (the \ncement concrete and excavation work shall be paid separately).\n\n 1 Each
16 16 Weight Lifter: Providing, designing and fixing weight lifter of size 1000 x 1000 x 2500 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base plate\ncover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps\n for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and\n once the concrete is set, fix the equipments on to it and cover \nwithn the base plate. All complete as per direction and approval of\n engineer-in-charge regarding material, shape of equipment, colour\n on metal, seat and base pedal and fixing of equipments etc (the \ncement concrete and excavation work shall be paid separately).\n\n 1 Each
17 17 Fix Dumbbell: Providing, designing and fixing fix dumbbell of size 1250 x 350 x 2200 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base plate\ncover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps\n for user safety. The equipment to be fixed on ground with \nconcrete of minimum strength M-25 and J shape welded bolts and\n once the concrete is set, fix the equipments on to it and cover \nwithn the base plate. All complete as per direction and approval of\n engineer-in-charge regarding material, shape of equipment, colour\n on metal, seat and base pedal and fixing of equipments etc (the \ncement concrete and excavation work shall be paid separately).\n\n 1 Each
18 18 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer\nby ramming, watering etc, disposing of surplus excavated soil, as\ndirected within a lead of 50 m and lift upto 1.5 m.\n \n 23 Nos
19 19 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\n a) 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)\n\n 30 Cum
20 19.01 b) 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)\n\n\n \n 30 Cum
21 20 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.\n The Contractor has to detect different utilities like sewer line, water supply line, Electric cable , Telephone cable , Gas pipe line etc. using utility detecting macine before start of excavation and shall start excavation only after getting permission of Engineer in charge \n\nAll kind of soil \n\n 31.8 Cum
22 21 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 4.34 Cum
23 22 Providing and fixing rubber tile flooring 25mm thick made of SBR (Styrene-Butadiene Rubber) with interlocking arrangements and adhesive all complete colour and size as approved by Engineer-in- charge. 300 per Sqmtr
24 23 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated\nretro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet\nincluding appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(\nStructural frame work including M.S. plate to be provided\nseparately. Rectangular area of the sheet only shall be measured for payment).\n Overhead informatory road signage\n\n\n 2.16 sqm
25 24 AMC after completion of 1 year warranty period will be as follow:- Maintenance of all equipment , T & P other accessories , Rubber tile flooring Repairing all defects i.s replacement of bearing , Rubber tiles refixing of out of order Machines , Re-Painting if painting is removed any place etc for all in full year complete in all respect. \n Rs. 1957380.00\n\n
26 24.01 (a) Year Ist (Complementry )
27 24.02 (b) Year IInd (AMC for 2nd year , 6% of Rs. 1850264) 1 Job
28 24.03 (c) Year IIIrd (AMC for 3rd year, 8%of Rs. 1850264) 1 Job
29 24.04 (d) Year IV (AMC for 4th year , 10%of Rs. 1850264) 1 Job
30 24.05 (e) Year Vth (AMC for 5th year, 12%of Rs. 1850264) 1 Job
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail