}

Repairs To Flooring , Joinery , Sanitary Fittings , Roof , Plaster , False Ceiling , Periodical Services , Att And Welcome Maintenance To Certain Married And Otm Bldgs In Kalina And Santacruz Area At Af Stn Mumbai Under Ge ( Af ) Thane, THANE-Maharashtra

Military Engineer Services-MES has published Repairs To Flooring , Joinery , Sanitary Fittings , Roof , Plaster , False Ceiling , Periodical Services , Att And Welcome Maintenance To Certain Married And Otm Bldgs In Kalina And Santacruz Area At Af Stn Mumbai Under Ge ( Af ) Thane. Submission Date for this Tender is 18-02-2021. Shed Construction Tenders in THANE Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

26698375
Corrigendum : Repairs To Flooring , Joinery , Sanitary Fittings , Roof , Plaster , False Ceiling , Periodical Services , Att And Welcome Maintenance To Certain Married And Otm Bldgs In Kalina And Santacruz Area At Af Stn Mumbai Under Ge ( Af ) Thane
Open Tender
Indian
Maharashtra
THANE
18-02-2021

Tender Details

Repairs To Flooring , Joinery , Sanitary Fittings , Roof , Plaster , False Ceiling , Periodical Services , Att And Welcome Maintenance To Certain Married And Otm Bldgs In Kalina And Santacruz Area At Af Stn Mumbai Under Ge ( Af ) Thane

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 11-Feb-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 18-02-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 60000.0 /-
Tender Value
INR 30 Lakhs /-

BOQ Items

Name of Work: REPAIRS TO FLOORING,JOINERY,SANITARY FITTINGS, ROOF, PLASTER, FALSE CEILING,PERIODICAL SERVICES ,ATT AND WELCOME MAINTENANCE TO CERTAIN MARRIED AND OTM BLDGS IN KALINA AND SANTACRUZ AREA AT AF STN MUMBAI UNDER GE(AF)THANE
Sl. No. Item Description Unnamed: 2 Quantity Units
1 1.01 M&L for preparation of plastered or unplastered old surfaces of the following and apply two coats of white wash ,complete all as specified and directed by Engineer-in-charge.
2 1.02 Of wall 691 Sqm
3 1.03 Of ceiling 327 Sqm
4 2 M&L for preparation of the following old surfaces of any description over 10 cm in width or girth not otherwise described and apply one coat of synthetic enamel paint ,complete all as specified and directed by Engineer-in-charge.
5 2.01 Of steel surfaces 388 Sqm
6 2.02 Of wooden surfaces 198 Sqm
7 3 M&L for 3mm thick wall care putty on the following surfaces,complete all as specified and directed by Engineer-in-charge.
8 3.01 On old wall surfaces 3491.01 Sqm
9 3.02 On old surfaces of ceiling 2908.03 Sqm
10 4 M&L for preparing old plaster surfaces including washing, rubbing down and stopping of distempered and painted surfaces, apply two coats of oil bound distemper over a coat of primer ,complete all as specified and directed by Engineer-in-charge.On the following surfaces:-
11 4.01 On old plaster surfaces of wall 3491.01 Sqm
12 4.02 On old plaster surfaces of ceiling 2908.03 Sqm
13 5 Taking down cement plaster on brick or stone wall as in jambs & cills etc incl racking not joints scrubbing down with water ,complete all as specified and directed by Engineer-in-charge. 493.07 Sqm
14 6 M&L for preparing new plaster surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces, apply two coats of oil bound distemper over a coat of primer ,complete all as specified and directed by Engineer-in-charge. 102.56 Sqm
15 7 M&L for preparing old painted surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces, apply two coats of plastic emulsion paint over a coat of primer ,complete all as specified and directed by Engineer-in-charge. 100 Sqm
16 8 Rendering 10 mm thick ( first coat ) on fair faces of brick work or concrete surfaces in cement mortar 1:6 and 5 mm thick ( second coat ) in CM ( 1:4 ) mixed with water proofing compound including finished even and smooth without using extra cement ,complete all as specified and directed by Engineer-in-charge. Note: Water proofing compound shall be measured and paid separately. \n 343 Sqm
17 9 M&L for preparing new plaster surfaces of walls applying one coat of weather coat primer and two coats of weather proof acrylic emultion paint all as per manufacturers instructions and directed including scaffolding complete all as specified by GE/Engineer-in-Charge Make : Asian Paint Apex, Berger weather coat 343 Sqm
18 10 Supply only integral water proofing compound ,complete all as specified and directed by Engineer-in-charge. 48.36 Kg
19 11 Opening out cracks, removing the loose material. Filling with polymer modified mortar and applying two coats of cross link polymer Ru-flex WG. Ru-flux WG to be mixed with cement and water in 1:0.9::0.10 ratio where 1 part Ru-flex, 0.9 part cement & 0.10 part water thoroughly mixed to form a brushable slurry and applied with a regular paint brush ,complete all as specified and directed by Engineer-in-charge. 91.83 RM
20 12 M&L for complete removal of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc filling up all cracks and defects with CM 1:3 and applying one coat of weather coat primer and two coats of weather proof acrylic emultion paint all as per manufacturers instructions and directed including scaffolding complete all as specified by GE/Engineer-in-Charge Make : Asian Paint Apex, Berger weather coat or equivalent 405.35 Sqm
21 13 M&L for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying one coat of weather proof acrylic emultion paint all as per manufacturers instructions and directed including scaffolding complete all as specified by GE/Engineer-in-Charge Make : Asian Paint Apex, Berger weather coat 489.66 Sqm
22 14 M&L for application of leakage/ seepage proof coating consisting of preparation of surface of exterior walls, parapet, chajjas etc with wire brush to remove all loose dirt, oil, grease etc and filling cracks more than 5mm wide with Dr Fixit Pedelite URP or with plaster seal of STP Ltd and crack less than 5mm wide Dr Fixit crack X powder or with plaster seal of STP Ltd and applying Dr Fixit primeseal primer or STP Ltd (and allow to dry/set for 08 Hours) and subsequently apply two coats of water proof decorative elastomeric coating system of approved shade/colour of Dr. Fixit Raincoat wih DFT 100 microns shade/colour or shalicry 2115 of STP ( The surface after painting one coat shall be allowed to dry at least 08 hours before next coat) through approved applicator all as per manufacturer instructions including double scaffolding etc ,complete all as specified and directed by Engineer-in-charge. 808.31 Sqm
23 15 M&L for taking down plants of upto five storied height building of bushes of 10 plants per location of the building including taking down plants with roots and making good the surfaces by apllying a coat of appropriate acid treatment,etc and finishing the surfaces with CM 1:3, 100mm thick and acryilic painting to match with the adjacent surfaces ,complete all as specified and directed by Engineer-in-charge. 22 Each Job
24 16 Writting the name of buildings on extenal surface of wall of the buildingusing thick paint and shoulld standout solidly and boldly with out showing signs of brush in the format ,complete all as specified and directed by Engineer-in-charge. 7.8 Per 10 Nos (per 20 cm of height)
25 17 Writing stops, commas, short lines, dashes, hyphons, brackets etc all as specified and directed by Engineer-in-charge. 2.6 Per 10 Nos
26 18 M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work of ceiling complete all as specified and directed by Engineer-in-charge. 25 Sqm
27 19 M&L for 3mm thick one coat of wall care putty on new ceiling surfaces ,complete all as specified and directed by Engineer-in-charge. 25 Sqm
28 20 M&L for preparation of new plastered surfaces on ceiling and applying two coats of oil bound distemper over a coat of alkali resistant priming paint all as specified but on ceiling ,complete all as specified and directed by Engineer-in-charge. 25 Sqm
29 21 Taking down steel tubing and connection including cleaning for re-fixing or removal to store ,complete all as specified and directed by Engineer-in-charge. 47.8 RM
30 22 S&F steel water tubing 15mm bore of tubing , medium grade galvanised iron with all fittings and fixed complete to wall and ceilings or laid in floors ,complete all as specified and directed by Engineer-in-charge. 37.8 RM
31 23 M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth ,complete all as specified and directed by Engineer-in-charge. 37.8 RM
32 24 S & F in repair steel tubing & connections (walls, ceilings, floors etc) for 15 mm bore of pipe ,complete all as specified and directed by Engineer-in-charge. 10 RM
33 25 S & F in repair 110 mm dia PVC pipe fixed in postion ,complete all as specified and directed by Engineer-in-charge. 26.8 RM
34 26 S & F in repair PVC bend/door bend 110 mm fixed in position ,complete all as specified and directed by Engineer-in-charge. 5 Each
35 27 S&F in repair PVC connection 15mm bore 600mm long with brass connections & washers ,complete all as specified and directed by Engineer-in-charge. 11 Each
36 28 S&F in repair brass chromium plated shower rose 125mm size ,complete all as specified and directed by Engineer-in-charge. 13 Each
37 29 S&F in repair PVC nahani trap for 100mm dia with grating fixed in position ,complete all as specified and directed by Engineer-in-charge. 4 Each
38 30 S&F vitreous china squatting pan orissa patern size 580 x 440 mm white with integrated foot rests (excluding flushing cistern & flush pipe as in repair) ,complete all as specified and directed by Engineer-in-charge. 5 Each
39 31 S&F vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but including brackets as in repair ,complete all as specified and directed by Engineer-in-charge. 5 Each
40 32 S&F, in repair ,high level flushing cistern plastic valve less syphonic action type white with inlet ball valve float chain and ball bracket & capacity 10 ltr ISI marked make commander including 32mm PVC flush pipe as ,complete all as specified and directed by Engineer-in-charge. 4 Each
41 33 S&F, in repair ,32mm high density polyethylene pipe (HDPE) of pressure rating 6 kg/cu cm fixed complete to walls ceiling or in floor ,complete all as specified and directed by Engineer-in-charge. 24.5 RM
42 34 S&F, in repair, pillar taps 15mm bore of pipes fancy type, stainless steel CP ,complete all as specified and directed by Engineer-in-charge. 4 Each
43 35 S&F, in repair, stop cock valves 15mm cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions ,complete all as specified and directed by Engineer-in-charge. 13 Each
44 36 S&F , in repair, bib tap 15mm bore chromium plated cast copper alloy with crutch or butter fly handle screwed down for iron pipe ,complete all as specified and directed by Engineer-in-charge. 14 Each
45 37 S&F, in repair, Two way Bib taps(ISI Marked), fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15mm bore ,complete all as specified and directed by Engineer-in-charge.\n 7 Each
46 38 S&F,in repair, Health Faucet with hose & hook(ISI Marked), fancy type chromium plated cast copper alloy fixed of size 15mm bore ,complete all as specified and directed by Engineer-in-charge.\n 3 Each
47 39 S&F,in repair, angle cock , Fancy type Chromium plated(ISI marked) screwed down high pressure with crutch or butterfly handle, screwed both ends (externally theaded) for iron pipe or for unions and fixed complete all as specified and as directed for following dia of pipe 15 mm bore\n 2 Each
48 40 S&F , in repair, PVC (SWR) bend 75mm bore any radius with access door ,complete all as specified and directed by Engineer-in-charge. 2 Each
49 41 S&F , in repair, PVC (SWR) 110mm bore branch piece, single (Single 'Y') equal or with acess door ,complete all as specified and directed by Engineer-in-charge. 3 Each
50 42 S&F, in repair, Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples ,complete all as specified and directed by Engineer-in-charge. 35.6 Sqm
51 43 Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to stone and rubbish of the premises ,complete all as specified and directed by Engineer-in-charge. 73 Sqm
52 44 Dismantling of concrete in any position ,complete all as specified and directed by Engineer-in-charge. 1 Cum
53 45 M&L for machine cut cudappa stone slab 15-20mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing over 10mm thick in CM 1:3 as backing coat to receive cudappa stone slab,complete all as specified and directed by Engr-in-charge. 9.8 Sqm
54 46 M&L Virtified Ceramic tiles dark shade/ double charged/ultra charged 10mm thick (Square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm but not exceeding 0.42 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:4 for receiving floor finished ,complete all as specified and directed by Engr-in-charge. 18 Sqm
55 47 M&L Virtified Ceramic tile dark shade/ double charged/ultra charged 10mm thick (Square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm but not exceeding 0.42 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick in CM 1:3 as backing coat to receive dado/skirting complete all as specified and directed by Engr-in-charge. ,complete all as specified and directed by Engineer-in-charge. 3 Sqm
56 48 M&L for 450x300x7mm thick glazed coloured ceramic tiles as in vertical surface and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10mm thick in CM 1:3 as backing coat to receive skirting / dado, complete all as specified and directed by Engr-in-charge. 66 Sqm
57 49 M&L for black granite 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms to match over 15 mm thick in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite ,complete all as specified and directed by Engineer-in-charge. 3 Sqm
58 50 M&L Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 ,complete all as specified and directed by Engineer-in-charge. 43 Sqm
59 51 M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 as backing coat to receive floors ,complete all as specified and directed by Engr-in-charge. 197 Sqm
60 52 Taking down chowkats or frames with shutters (without taking off shutters form frame) not exceeding 1.5 sqm each ,complete all as specified and directed by Engr-in-charge. 4 Each
61 53 Taking down chowkats or frames with shutters (without taking off shutters form frame) . exc 1.5 sqm & n.exc 4 sqm each (wooden) ,complete all as specified and directed by Engr-in-charge. 12 Each
62 54 Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each (wooden shutters) ,complete all as specified and directed by Engr-in-charge.. 5 Each leaf
63 55 S&F solid PVC solid door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling and fixing in opening ,complete all as specified and directed by Engr-in-charge. 19 RM
64 56 S&F solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction ,complete all as specified and directed by Engr-in-charge. 5.2 Sqm
65 57 S&F 2nd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints ,complete all as specified and directed by Engr-in-charge. 0.43 Cum
66 58 M&L for 2nd class hardwood ,exc 13 Sqcm and n exc 25 sqcm ,plain fillets ,square,rectangular or triangular insection, clean sawn, secured with nails orbrads complete all as specified and directed 9 RM
67 59 S&F for 35mm thick IInd class HW rail and style plain framed, panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln seasoned and chemically pressure treated , complete all as specified and directed by Engr-in-charge. 17.4 Sqm
68 60 S&F 30mm thick Flush shutters,solid core construction,with block board core and plywood face panels,commercial type on both sides etc , complete all as specified and directed by Engr-in-charge. 7.2 Sqm
69 61 M&L for Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 , complete all as specified and directed by Engr-in-charge. 8.48 Kg
70 62 Cutting holes in brick walls exc half bricks but nexc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cm (1:3) or cement concrete (1:2:4) type B1 as required with and including removing debris outside MOD land , complete all as specified and directed by Engr-in-charge.. 96 Each
71 63 S&F but hinges stainless steel 100mm long heavy weight ,complete all as specified and directed by Engr-in-charge. 74 Each
72 64 S&F 150 mm length of aluminium anodised barrel tower bolts of extruded section ,complete all as specified and directed by Engr-in-charge. 28 Each
73 65 S&F 200mm long aluminium anodized barrel tower bolt extruded section ,complete all as specified and directed by Engr-in-charge. 23 Each
74 66 S&F extruded aluminium anodised alloy handles ,100mm fabricated type, ,complete all as specified and directed by Engr-in-charge. 40 Each
75 67 M&L for preparation of new wood surfaces of any description over 10cm width of girth and applying two coats of synthetic enamel paint over coat of pink primer etc ,complete all as specified and directed by Engr-in-charge. 64 Sqm
76 68 S&F, in repair, for Plain fillets, square, rectangular or triangular in section, clean sawn, secured with mills or brads, Exc 3 Sq cm but n exc 6 sqcm,in 2nd class hardwood , complete all as specified and directed by Engr-In- Charge. 18.6 RM
77 69 S&F, in repair, door sliding bolt aldrop 250 mm long aluminum anodised Make-classic/Shalimar , complete all as specified and directed by Engr-In- Charge. 11 Each
78 70 S&F, in repair,140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring , complete all as specified and directed by Engr-In- Charge. 10 Each
79 71 S&F extruded aluminum alloy handles, fabricated type anodized 150mm long, complete all as specified and directed by Engr-In- Charge. 9 Each
80 72 Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 sqm , complete all as specified and directed by Engr-In- Charge. 6 Sqm
81 73 S&F sheet glass ordinary quality 4.50 mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane , complete all as specified and directed by Engr-In- Charge. 2.4 Sqm
82 74 Taking down shutters of any description not exc 01 sqm each and removing from site , complete all as specified and directed by Engr-In- Charge. 9 Per leaf
83 75 M&L for medium density fibre (MDF) board 18mm , exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work ,complete all as specified and directed by Engr-in-charge. 9 Sqm
84 76 S&F magnetic catches brass body and striking plate with aproved quality , complete all as specified and directed by Engr-In- Charge. 9 Each
85 77 S&F, in repair ,continuous (Piano) hinges, mild steel bright finish or electro galvanised width of flaps (when open) in 40mm , complete all as specified and directed by Engr-In- Charge. 10.8 RM
86 78 Repairs to shutters of any description n. exc 1 sqm each Resecuring or easing & adjusting without taking down , complete all as specified and directed by Engr-in-charge. 3 Each
87 79 Repairs to shutters of any description Resecuring or easing & adjusting without taking down , area exc 1 sqm but n. exc 2 sqm , complete all as specified and directed by Engr-in-charge. 3 Each
88 80 S&F ,in repair, powder coated aluminium Door/ window/ sliding window / Ventilator / partition frames and shutters using standard aluminium powder coated sections including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading, screws, anodised aluminium fittings suitable Nylon gasket, nylon rollers, maruthi locks, handles, concealed star lock, aluminium F channel for fixing aluminium grill and all necessary fittings and fixtures etc all as specified and complete of as per standard sections and fixing to cudappa stone/granite stone with necessary bolts/screws ,complete all as specified and directed by Engr-in-charge. 66.6 Kg
89 81 S&F aluminium anodized grill of 4.75 x 7.75 mm, size of opening 10cm, size of mesh RG 103 (as per royal grill) with aluminium channel `F' angle 20mmx15mm fixed to aluminium frame ,complete all as specified and directed by Engr-in-charge. 7.2 Sqm
90 82 S&F ,in repair, 5 mm thick frosted sheet glass fixing with aluminum frame with necessary screw/bolt ,complete all as specified and directed by Engr-in-charge. 3.6 Sqm
91 83 M&L machine cut cudappa stone slab 30-40mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing over 10mm thick in CM 1:3 as backing coat to receive cudappa stone slab , complete all as specified and directed by Engr-in-charge. 1.2 Sqm
92 84 Dismantling of floor or wall tiles, stone slab of any description or thickness laid ,bedded and pointed in anymorter all as specified and removing the debris outside MOD Land , complete all as specified and directed by Engr-in-charge. 22.8 10 Sqm
93 85 Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store ,complete all as specified and as directed by Engineer-in-charge 22.8 RM
94 86 M&L for 20mm bore medium grade GI tubing with all fittings fixed to walls and ceiling or laid in floors , complete all as specified and directed by Engr-in-charge. 46.11 RM
95 87 S&F,in repair, Vitreous China wash down water closet pan(pedestal pattern) white (squatting pan & trap including 'P' or 'S' trap connection to drain (or out going pipe and to flushing pipe anti syphonic pipe etc , complete all as specified and directed by Engr-in-charge. 5 Each
96 88 S&F,in repair ,plastic water closet seat , black, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device , complete all as specified and directed by Engr-in-charge. 5 Each
97 89 S&F, in repair ,low level flushing system plastic valveless syphonic action type white with inlet ball valve float chain and ball (of capacity 10 ltrs ISI marked inck 32mm PVC flush pipe as in repairs. Make Commander or equivalent ISI marked, complete all as specified and directed by Engr-in-charge. 11 Each
98 90 S&F Stainless steel CP Towel rail 20 mm dia, D type 60 cm long , complete all as specified and directed by Engr-in-charge. 2 Each
99 91 S&F, in repair,bevelled edge mirror 600x450mm size of selected quality on 6mm thick AC sheet or 6mm thick commercial plywood fixed to wooden plug with stainless steel CP with Brass screws & cup washers , complete all as specified and directed by Engr-in-charge. 2 Each
100 92 S&F half turn stainless steel CP Pillar taps of 15 mm bore with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shan ks and fly nuts screwed for iron pipe , complete all as specified and directed by Engr-in-charge. 8 Each
101 93 M&L for 75mm bore medium grade GI tubing with all fittings fixed to walls and ceiling or laid in floors , complete all as specified and directed by Engr-in-charge. 15 RM
102 94 S&F ,75 mm bore PVC (SWR) bends , complete all as specified and directed by Engr-in-charge. 2 Each
103 95 S&F,in repair, Aluminium Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg , complete all as specified and directed by Engr-in-charge. 4 Each
104 96 S&F,in repair,brass mortice lock 4 levers, vertical type size 100 mm , complete all as specified and directed by Engr-in-charge. 2 Nos
105 97 Dismantling AC/Galvalume sheets as in roof covering is any position all as specified and removing them outside MOD Land , complete all as specified and directed by Engr-in-charge. 158.87 Sqm
106 98 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws and using necessary scaffolding , complete all as specified and directed by Engr-in-charge. 135.56 Sqm
107 99 S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof ridge covering, fixed with self tapping screws using necessary scaffolding as specified and directed. 23.31 Sqm
108 100 S&F rolled sections with ERW or Induction butt weld M.S. tube black conforming to IS 1161-1979 grade Yst 240 as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates , complete all as specified and directed by Engr-in-charge. 74.83 Kg
109 101 Dismantling of wall and ceiling boards ( fibre ,pulp, insulation,etc,) or insulation boards/slabs/blankets any thickness,including cover fillets , complete all as specified and directed by Engr-in-charge. 54.59 Sqm
110 102 S&F MS joist, chanel, angle, or tee section fixed independently without conecting plates for holding ceiling make frame and similar work confirming to Fe-410-W Grade E 250 , complete all as specified and directed by Engr-in-charge. 23.31 Kg
111 103 S&F 605 x 605 mm anodised aluminium snap grid frame work for false ceiling , complete all as specified and directed by Engr-in-charge. 11.65 Sqm
112 104 M&L for 06 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium/Steel frame work with screws or like in ceiling , complete all as specified and directed by Engr-in-charge. 11.65 Sqm
113 105 S&F PVC false ceiling consisting of 600x600mm, 5mm(± 0.25) thick plain embossed PVC sheet of density 600 Kg/Cum Manufactured by an ISO certified company, used as panel insert in a framework made using anodized aluminium T-section f sizes of 1''x1''(25x25mm,19 gauge or 1 mm thick) in square pattern of grid sizes 2'x2' (600x600mm). The aluminium framework is supported from the ceiling with the help of 'J' hook and GI wire/6mm M.S rods of required sizes to maintain proper level etc. The aluminium framework is suported on side wall with the use of aluminium L-section of size 1''x1''(25x25mm) angles , complete all as specified and directed by Engr-in-charge. 42.94 Sqm
114 106 Demolition of cement concrete of any description and in any position not otherwise specifically provided for including old tarfelt etc and removing them outside MOD Land , complete all as specified and directed by Engr-in-charge. 4.91 Cum
115 107 M&L for Plain Cement concrete in foundations, filling and mass concrete ,type C-2 (1:3:6) using 20mm graded stone aggregate as in foundations, filling,roof padding & mass concrete ,complete all as specified and directed by Engr-in-Charge. 4.91 Cum
116 108 M&L wire brushing and cleaning top surface of tiles lime terracing or cement concrete, including flashings and junction of parapets etc and surface painting with a layer of blown bitumen of any penetration applied hot @ 1.7 Kg per sqm ,complete all as specified and directed by Engr-in-Charge. 236.16 Sqm
117 109 Material and labour for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment for:-\n(a) Apply bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified.\n(MAKE : TEXSA/BITUMAT/BITUNIL/SIKA)\n(b) Apply APP plastomeric bitumen based mineral finished water proofing membrane polyester reinforced(4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (Make of APP Membrane: Moply FP 3 mm mineral of TEXA/WP Shield 103 PM of SIKA or Equivalent material of BITUNIL/BITUMAT. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 kg/sqm prescribed by manufacturer complete all as specified. 236.16 Sqm
118 110 M&L for preparing surfaces of roof new or previosuly untreated surface by applying 2 coats of bitumenous base aluminium paint over a coat of priming paints plastered coat ,complete all as specified and directed by Engr-in-Charge. 236.16 Sqm
119 111 M&L preparing surfaces of roof old painted surface or previosuly untreated surface by applying 1 coats of bitumenous base aluminium paint over ,complete all as specified and directed by Engr-in-Charge. 163.78 Sqm
120 112 M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement plaster, CM 1:4 using water proofing compound on top of roof including raking out old surface , complete all as specified and directed by Engr-in-charge. (Note:- WPC will be accounted & paid separately) . 47.23 Sqm
121 113 M&L rendering 15mm thick plaster in CM 1:6 on stone or brick work including finished even and smooth without using extra cement an on internal walls , complete all as specified and directed by Engr-in-charge. 102.56 Sqm
122 116 M&L for 15 mm thick cement plaster on stone or concrete surfaces in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on external walls , complete all as specified and directed by Engr-in-charge. 23.51 Sqm
123 117 Disconnecting existing tanks, exc 1000 & n exc 2000, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning ,repairing, etc. measured separately),etc , complete all as specified and directed by Engr-in-charge. 2 Each
124 118 Disconnecting existing tanks,exc 250 & n exc 500, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning, repairing, etc. measured separately),etc , complete all as specified and directed by Engr-in-charge. 3 Each
125 119 S & F ,in repair, Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, fixed in Bore dia of pipe in 20 mm, etc , complete all as specified and directed by Engr-in-charge. 2 Each
126 120 S & F,in repair ,Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, fixed in Bore dia of pipe in 25 mm, etc , complete all as specified and directed by Engr-in-charge. 2 Each
127 121 S&F ,in repair, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top ) of 500 ltr capacity,triple layered,hoisted and fixed in position all as specified including dismantling old tank , complete all as specified and directed by Engr-in-charge. 2 Each
128 122 S&F, in repair, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top ) of 2000ltr capacity ,triple layered, hoisted and fixed in position all as specified including dismantling old tank , complete all as specified and directed by Engr-in-charge. 2 Each
129 123 S & F, in repair, Ball valves for bore dia of pipe in 20 mm,high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms), etc , complete all as specified and directed by Engr-in-charge. 2 Each
130 124 S & F ,in repair ,Ball valves for bore dia of pipe in 25 mm ,high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) , etc , complete all as specified and directed by Engr-in-charge. 2 Each
131 125 Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 1000 & n exc 2000, etc , complete all as specified and directed by Engr-in-charge. 3 Each
132 126 Dismantling of cast iron/AC/PVC pipes100/110mm dia, jointed in cement mortar and taking out of trenches if required and removing them outside MOD Land , complete all as specified and directed by Engr-in-charge. 44.16 RM
133 127 S&F,in repair ,PVC (SWR) pipes single socketed for bore of pipe in 110 mm, in any length with rubber ring joints, fixed to wall or in floors , etc complete all as specifed and directed.(At any height of building, till 4 floors also). 44.16 RM
134 128 Removing of vegetation / plantation on the wall of multiple storey building including necessary scaffolding and roots superfacial area n.exc 2 sqm each and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete.(Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately) , complete all as specified and directed by Engr-in-charge. 19 Each
135 129 S&F in repair SMC water tank cover of any make approved by BMC including locking device suitable for water tank of any capacity and having weight not less than 2.4 Kg , complete all as specified and directed by Engr-in-charge. 7 Each
136 130 M& L for Post construction Anti termite treatment by chemical emulsion (CHLORPYRIPHOS 20 EC ) as approved by IS 6313( part 3) : 2013 to Ground floor buildings adhering to following specifications:\na) For internal area drill holes of 12-mm dia at 300 cms C/C along the inner junction of wall and floor in the entire premise. Water based chemical emulsion will be injected under pressure into these holes with dosage until refusal or maximum up to 1 Lit per hole. Minimum 400 ml chemical emulsion needs to be fill per hole.\nb) For external area drill holes of 12-mm dia at 300 cms C/C along the external junction of wall and floor in the entire premise. Water based chemical emulsion will be injected under pressure into these holes with dosage of 2.25 ltrs per rm. c) All drilled holes to be sealed with white cement and matched with surrounding wall finishes.\nd) Treatment to wooden fixtures: At point of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @0.50 lt/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center to centre and sealing the same to match existing finish.\ne) Treatment to termite tubes: Visible shelter mud tubes will be removed and the infested area treated with water based chemical emulsion. All the drilled holes will be sealed and made good using cement.\nf) Treatment to be done by specialist agency licensed by IPCA and approved by Eng in charge. Specialist agency need to give written warranty for 10 years with yearly inspection ,and contact details to be displayed on board for attendance of complaint.Contractor need to submit gurantee amount against the ATT as mentioned in Particular specification.\nNote : plinth area of the building will be measured\nSpecialist agency : PCI, Elite corporation, paragon pesticides or IPCA licensed approved by GE \n 3200 Sqm
137 131 M& L for Post construction Anti termite treatment by chemical emulsion ( CHLORPYRIPHOS 20 EC ))as approved by IS 6313( part 3) : 2013 to first floor ( if infested with termite) of buildings adhering to following specifications:\na) For internal area drill holes of 12-mm dia at 300 cms C/C along the inner junction of wall and floor in the entire premise. Water based chemical emulsion will be injected under pressure into these holes with dosage until refusal or maximum up to 1 Lit per hole. Minimum 400 ml chemical emulsion needs to be fill per hole.\nb) All drilled holes to be sealed with white cement and matched with surrounding wall finishes.\nc) Treatment to wooden fixtures: At point of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @0.50 lt/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center to centre and sealing the same to match existing finish.\nd) Treatment to termite tubes: Visible shelter mud tubes will be removed and the infested area treated with water based chemical emulsion. All the drilled holes will be sealed and made good using cement.\ne) Treatment to be done by specialist agency licensed by IPCA and approved by Eng in charge. Specialist agency need to give written warranty for 10 years with yearly inspection ,and contact details to be displayed on board for attendance of complaint.Contractor need to submit gurantee amount against the ATT as mentioned in Particular specification \nNote : plinth area of the building will be measured\nSpecialist agency : PCI, Elite corporation, paragon pesticides or IPCA licensed approved by GE \n 1200 Sqm
138 132 M& L for Post construction Anti termite treatment by chemical emulsion as approved by IS 6313( part 3) : 2013 ( CHLORPYRIPHOS 20 EC ) to Second floor and above of buildings ( if not found infested with termite) adhering to following specifications:\na) For internal area drill holes of 12-mm dia at corner of rooms in the entire premise. Water based chemical emulsion will be injected under pressure into these holes with dosage until refusal or maximum up to 1 Lit per hole. Minimum 400 ml chemical emulsion needs to be fill per hole.\nb) All drilled holes to be sealed with white cement and matched with surrounding wall finishes.\nc) Treatment to wooden fixtures: At point of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @0.50 lt/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center to centre and sealing the same to match existing finish.\nd) Treatment to termite tubes: Visible shelter mud tubes will be removed and the infested area treated with water based chemical emulsion. All the drilled holes will be sealed and made good using cement.\ne) Treatment to be done by specialist agency licensed by IPCA and approved by Eng in charge. Specialist agency need to give written warranty for 10 years with yearly inspection ,and contact details to be displayed on board for attendance of complaint.Contractor need to submit gurantee amount against the ATT as mentioned in Particular specification\nNote : plinth area of the building will be measured\nSpecialist agency : PCI, Elite corporation, paragon pesticides or IPCA licensed approved by GE \n 1200 Sqm
139 133 M&L of voids in masonry using chemical emulsion as approved by IS 6313(Part 3) 2013 ( chlorpyrifos 20 EC )one Ltr per hole at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 Coarse Sand) to match the existing Surface , complete all as specified and directed by Engr-in-charge. 28 Sqm
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail