Jaipur Vidyut Vitran Nigam Limited-JVVNL has published Repair And Maintenance Of Residential Qtrs . At Nahri Ka Naka , Jaipur. Submission Date for this Tender is 24-01-2021. Building Repair Tenders in Nahri Ka Naka Rajasthan. Bidders can get complete Tender details and download the document.
Name of Work: R and M of Residential qtrs. at Nahri Ka Naka, Jaipur | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 0.001 | PART-A (Bldg.) | 1 | ||
2 | 1 | 1.8\nEarth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. \nAll kinds of soils | 5 | P.cum | |
3 | 2 | 3.1.6 & 3.1.2 \nProviding & Laying in position cement concrete i/c curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering – All work up to plinth level.: \n(A) 1:4:8 (1 cement:4 course sand: 8 graded stone aggregate 40 mm nominal size). | 5 | P.cum | |
4 | 2.01 | M15 grade Nominal Mix \n1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). | 3 | P.cum | |
5 | 3 | 6.1.6/B-6\nRandom Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:l in Cement sand Mortar 1:6 (1- Cement: 6- Sand). | 2 | P.cum | |
6 | 4 | 5.2.2/B-5\nBrick masonry with F.P.S. bricks of class designation 75 in Super structure above plinth level upto floor 5th level in all shapes and sizes in cement mortar 1:6 (1- cement: 6- coarse sand). | 15 | P.cum | |
7 | 5 | 5.8.3/B-5\nHalf brick masonry in super structure, above plinth level upto 5th level using bricks of designation 75 in Cement mortar 1: 6 (1- Cement: 6- Coarse sand). | 23 | P.sqm | |
8 | 6 | 6.17.3/B-6\nSupply and fixing in walls machine cut and polished stone shelves, tands and sills in CM 1: 3 with machine cut edges. Kota stone minimum 30mm thick. | 33 | P.sqm | |
9 | 7 | 12.3.2/B-12\nPlaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: \n(A) 20mm thick | 50 | P.sqm | |
10 | 7.01 | (B) 12mm thick (12.3.3) | 100 | P.sqm | |
11 | 8 | 9.5/B-9\nProviding and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. | 250 | P. Kg | |
12 | 9 | 8.13.2.1/B-8\nProviding and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure ‘A’ 30mm thick. Commercial veneer both side. | 26 | P.sqm | |
13 | 10 | 9.17.1/B-9\nProviding and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint | 14 | P.sqm | |
14 | 11 | 9.19.2\nProviding and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitered and welded with steel lugs 13X3 mm, 10 cm long embedded in c. conc. Block 15X10X10 cm of 1:3:6 (1- cement : 3-Course sand :6-Gr. Stone agg. 20 mm nom. Size) or with wooden plugs and screws or raw plugs and screws with clips or with bolts and nuts as required i/c providing and fixing of plain glass panes 4 mm th with copper glazing clips and special metal sash putty of approved make or metal beading with screws complete i/c priming coat of approved steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc window fixed. | 12 | P.sqm | |
15 | 12 | 9.26/B-9\nSupplying and fixing fixed wire gauge of 14 mesh X 24 gauge to the metal frame of rolled section by metal beading 20X3 mm with suitable screw at not exceeding 150 mm distance. | 12 | P.sqm | |
16 | 13 | 9.27/B-9\nProviding and fixing Square bars or other flats welded to windows, ventilators etc. | 30 | P.kg | |
17 | 14 | 11.26/B-11\nR.R dry stone kharanja under floor . | 2 | P.cum | |
18 | 15 | 7.14/B-07\nProviding and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). | 87 | P.sqm | |
19 | 16 | 7.15/B-07\nProviding and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). | 21 | P.sqm | |
20 | 17 | 11.18.1/B-11\nKota stone slab flooring 25 mm thick iover 20mm(Av.) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete with base of CM 1:4 for area of each slab from 901 to 2000 Sqcm | 100 | P.sqm | |
21 | 18 | 11.25\nExtra for Mirror polishing on terrazzo/Kota stone work where ever required to give high gloss finish complete. | 100 | P.sqm | |
22 | 19 | 13.20.1\nGrinding of existing floor with 60, 80, 120 and 360 No. Carborundum stone including cost of wax polishing complete : | 160 | P.sqm | |
23 | 20 | 9.2/B-9\nStructural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: | 150 | P.kg | |
24 | 21 | 9.38.1\nProviding and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size.\nWelded mesh 50 mmx 50 mm x 2.1 mm | 5 | P.sqm | |
25 | 22 | 16.1.1.1 & 16.1.2.1/B-16\nP & F anodized aluminum work (Anodized to be got done from approved Anodiser) for doors, windows, ventilators and partition with extruded built up standard tubelar and other sections of approved make confirming to IS : 733 & IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasters i/c necessary filling up of gas at junctions, at top , bottom and sides with required PVC / Neoprene felt etc. aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required i/c cleat angle Aluminium snap beading for glazing/paneling , C.P. brass/stainless steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer in charge.(Glazing and paneling to be paid for separately).\n(a) For fixed Portion .Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) | 15 | P.kg | |
26 | 22.01 | (b) For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). \nAnodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) | 15 | P.kg | |
27 | 23 | 16.5.2/B-16\nProviding and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) with float glass panes of 5.0mm thickness(weight not less than 13.50 kg/sqm) | 5 | P.sqm | |
28 | 24 | 16.10.1/B-16\nProviding and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Anodised aluminum (anodised transparent 81 dyed to required shade according to IS:1868. (min. anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) | 5 | P.sqm | |
29 | 25 | 16.4.1\nProviding and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. \nPre-laminated particle board with decorative lamination on one side and balancing lamination on other side. | 5 | P.sqm | |
30 | 26 | 16.8/B-16\nProviding and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | 1 | Each | |
31 | 27 | 16.6.1/B-16\nP&F double action hydraulic floor spring of approved brand and manufacture to aluminium door shutter confirming to IS : 6315 including cost of cutting floors and cover plate with brass pivot and single piece M.S. With stainless steel cover plate. | 1 | Each | |
32 | 28 | 9.39\nProviding and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge | 19 | P. Sqm | |
33 | 29 | 9.10\nProviding and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). | 9 | P.sqm | |
34 | 30 | 10.25.2\nProviding & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.3.0mm thick (Wt. 5.0 Kg./Mtr. Sq.) | 29 | P.sqm | |
35 | 31 | 14.2.1\nDemolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. \n1: 3: 6 or richer mix. | 2 | P.cum | |
36 | 31.01 | 1: 4: 8 or leaner mix. (14.2.2) | 2 | P.cum | |
37 | 32 | 14.7.3\nDemolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. \nIn cement mortar | 2 | P.cum | |
38 | 33 | 14.9.2\nDemolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: In cement mortar | 2 | P.cum | |
39 | 34 | 14.23.1\nDismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: For thickness of tiles 10mm to 25mm. | 100 | P.sqm | |
40 | 35 | 14.12.1\nDismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead: Of area 3 square meter and below | 8 | each | |
41 | 36 | 13.1\nRepairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead :\nWith cement mortar 1 :4 ( 1 cement : 4 coarse sand) | 8 | P.sqm | |
42 | 37 | 13.23\nRepair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete | 5 | P.sqm | |
43 | 38 | 13.29\nRepair to damaged RCC slabs, beams and columns etc for strengtheing with cement mortar 1 : 2 in following steps\ni) Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried.\nii) Applying Epoxy primer on the exposed steel bars.\niii) Applying Epoxy hardener and resin mix (as per manufectured's specification) on concrete and steel bars with brush.\niv)Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day.\nv) Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete.\nvi) Cure the plastered surface for 15 days\n All work including scaffolding etc. complete in all respect. | 5 | P.sqm | |
44 | 39 | 1.2.2/S-1\nP & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: size 580x440mm. | 5 | Each | |
45 | 40 | 1.3\nP & F European type white glazed vitreous china 1st quality W.C pan (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor | 3 | Each | |
46 | 41 | 1.36.3/S-1\nP & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :size 550x400 mm | 2 | Each | |
47 | 42 | 1.14.3/S-1\nP & F Ist quality WVC urinal (IS : 2556 mark) with 25 mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc: complete Mini stall size 455x385x350mm. | 3 | Each | |
48 | 43 | 1.20.2/S-3\nP & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: PVC with PVC bend as per IS : 7231 . | 6 | Each | |
49 | 44 | 1.7.2\nP & F water closet Seat Covers with brass hinges complete : \nSolid PVC (IS 2548 marked) grade-I White for EWC. | 3 | Each | |
50 | 45 | 1.59\nP&F Jet spray for water closet with C.P. Copper Tube flange of approved make. | 3 | Each | |
51 | 46 | 1.16.3/S\nP&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm.\nMakrana `Adanga` or Raj Nagar 1St Quality White or Andhi Indo-Italian marble.\n | 3 | each | |
52 | 47 | 2.1.1 /S-2\nP & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: Exposed on wall\n(A) 15mm dia nominal bore 'B' class | 10 | P.RM | |
53 | 47.01 | (B) 25mm dia nominal bore 'B' class (2.1.3) | 10 | P.RM | |
54 | 48 | 2.2.1 /S-2\nP & F G.I. pipe (External work) with G.I. Fittings excluding union (IS: 1239 Mark) including trenching & refilling earth etc\n(A) 15mm dia nominal bore 'B' class | 30 | P.RM | |
55 | 48.01 | (B) 25mm dia nominal bore 'B' class (2.2.3) | 30 | P.RM | |
56 | 49 | 2.3.1/S-1\nMaking connection of G.I. distribution branch with G.I. main including all fittings.upto 25mm dia. | 4 | Each | |
57 | 50 | 2.7.3 /S-2\nP & F Bib cock (IS: 8931 Mark), Superior quality of approved make:\n(A) C.P. brass bib cock 15mm nominal bore. | 12 | Each | |
58 | 50.01 | (B) C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm (2.7.4) | 10 | Each | |
59 | 51 | 2.11.2/S-2\nP & F Ball Cock (IS: 1703 Mark) with Rod & P.V.C. Ball complete: Brass wt. not less than 400gm 20mm | 10 | Each | |
60 | 52 | 2.12.1/S-2\nP & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. inlet connection 15mm Brass(Is: 8931 marked) | 15 | Each | |
61 | 53 | 2.13.2/S-2\nP & F 15mm Dia Connection Pipe of approved quality/make PVC pipe with C.P. brass nuts upto length, 370mm | 10 | Each | |
62 | 54 | 2.15.1 /S-2\nP & F Full - way Valve (IS: 778 Mark) or wheel valve of approved make:\n(A) Gun metal 15 mm nominal bore | 5 | Each | |
63 | 54.01 | (B) Gun metal 25 mm nominal bore (2.15.3) | 4 | Each | |
64 | 55 | 2.26.3/S-2\nP & F PVC Storage Tank ( IS: 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 CM long wash out pipe with plug & socket, including making connection etc., complete of approvrd design: 500 ltr capacity | 2 | Each | |
65 | 55.01 | (B) 300 Ltr capacity (2.26.2) | 5 | Each | |
66 | 56 | 1.43.1/S\nP& F waste Pipe with all fitting P.V.C with PVC nut 32 mm\n | 6 | each | |
67 | 57 | 2.6.1/S\nP & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make:\nC.P. Pillar cock, 15 mm dia nominal bore | 2 | each | |
68 | 58 | 2.32.1\nSupply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : \n(A)15mm dia nominal bore | 10 | each | |
69 | 58.01 | (B) 25mm dia nominal bore (2.32.3) | 10 | each | |
70 | 59 | 3.16.2 /S-3\nP & F rigid PVC pipe ( IS: 4985 make) class II/(4 Kg./Cm2). Approved quality /make including jointing the pipe with solvent cement rubber ring and lubricant.\n(A) 75 mm dia | 10 | P.RM | |
71 | 59.01 | (B) 110mm dia. (3.16.3) | 15 | P.RM | |
72 | 60 | 3.3.1/S\nProviding & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete (Width W= Dia of pipe in Cm+ 30Cm.) concrete width to be reduced from width W at center of pipe to `0` at top of pipe. (Excluding cost of pipe) 100mm dia S.W. pipe | 20 | P.mtr | |
73 | 61 | 3.17.9,3.17.12 & 3.17.4,3.17.10/S-3\nP & F rigid PVC pipe fitting ( IS: 4985 make) of approved quality /make including jointing the pipe with solvent cement rubber ring and lubricant.\n(A) Bend 87.5 75mm dia | 5 | Each | |
74 | 61.01 | (B) Bend 87.5 110mm dia | 6 | Each | |
75 | 61.02 | (C ) Vent Cowel 110mm | 1 | Each | |
76 | 61.03 | (E) Door tee 75mm Dia | 2 | Each | |
77 | 61.04 | (F) Door tee 110mm Dia | 2 | Each | |
78 | 61.05 | (G) Door Bend (top side ) 75mm Dia | 2 | Each | |
79 | 61.06 | (H) Door Bend (top side ) 110mm Dia | 2 | Each | |
80 | 62 | 3.19.1/s-3\nConstruction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M | 2 | Each | |
81 | 63 | 3.21.1\nConstruction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. | 2 | Each | |
82 | 64 | 3.39.4/S-3\nConstruction of Cement Concrete Chamber 125mm dia on depressed floor upto 45cm height from floor with :\nStainless Steel Sheet Grating | 5 | Each | |
83 | 65 | E 020101,02,03\nWiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. (Group - 2)\n(A) Short point (up to 3mtr). | 10 | Each | |
84 | 65.01 | (B) Medium point (up to 6mtr). | 15 | Each | |
85 | 65.02 | (C) Long point (up to 10mtr). | 5 | Each | |
86 | 66 | E 020301\nWiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal, 6 A switch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. (Group - 2) \non board. | 5 | Each | |
87 | 67 | E 020402\nS/F following sizes (dia) of ISI marked medium duty PVC conduit along with accessories in surface/recessed using saddles, clamps fasteners as required i/c cutting the wall and good the same as required \n25mm (Group - 2) | 20 | P.RM | |
88 | 68 | E 040108 & E040117\nSuppling and drawing FR PVC insulated and unsheated flexible copper conductor ISI marked (IS: 694) of 1.1 KV grade and approved make in existing surface/recessed counduit/casing caping including making connection etc. as required(Group - 1)\n(A) 2 X 2.5 sqmm.+ 1x1.5 sqmm. | 30 | P.RM | |
89 | 68.01 | (B) 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. | 30 | P.RM | |
90 | 69 | E 040500\nS/F of power plug point accessories on 18 SWG metal box of size 175 X 100 X 60 mm on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6pin 16amp switch & socket outlet making connection testing etc. as required.Gr-2 | 5 | Each | |
91 | 70 | E 060112\nP&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.(Group-2) 6A to 32 A rating.single pole mcb | 12 | Each | |
92 | 71 | E060232\nP&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required.(Group - 1), : FOUR pole isolator 63 A rating | 4 | Each | |
93 | 72 | E 060543\nP&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. Double door ( Three phase) 8way Group- 2 | 2 | Each | |
94 | 73 | E071400\nP&F IS 371 marked 6amp surface type ceiling rose i/c making connection testing etc, as required, Group - 2 | 5 | Each | |
95 | 74 | E071500\nP&F ISI marked 6amp bakelite batten/angle holder i/c making connection testing as required, Group - 2 | 5 | Each | |
96 | 75 | E301300\nP&F of 36 watt IP 20 LED 2'x2' fixture, recessed/ surface type, having efficacy of not less than 100 lumen/watt,made out from CRCA housing and with high purity/ transmissivity duffuser for uniform light distribution high efficiency driver electronics and in compliance to IEC standard (integral with light fixtures), life time of more than 50000 burning hours, CCT 6000K(minimum), CRI >80 driver maintaining PF > 0.9. | 2 | Each | |
97 | 76 | E301500\nP&F 1200 mm sweep BEE 5 star rated double ball bearing capcitor start, aluminium body & blade ceiling fan complying to IS 374:1979 I/P 50 watt at max speed & 230 volt, air delivery> 210CMM, speed > 330 RPM with down rod upto 30 cm with 3x1.5 sqmm PVC insulated flexible copper conductor making connection testing etc as required. | 2 | each | |
98 | 77 | E072200\nP & F socket size flush type 120/280 watt rotary 5 step fan regulator including making connection testing etc. as required. (Gr-2) | 6 | Each | |
99 | 78 | E171301\nP&F of capacitor start, metal body metal blade three speed wall mounting fan of following sweep with the help of anchor bolts including making connection testing etc. as required 400mm sweep (Oscillating type) Gr.1) | 2 | Each | |
100 | 79 | E 171001 \nP&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. Gr. - 2\n(A) 300mm sweep (900/1400 RPM) | 2 | Each | |
101 | 80 | E301400\nP & F of IP 20 LED tubelight 20 watt withexternal batten made from CRCA sheet steel suitable to replace T-8/T-12 tubelight integral driver, 2000 lumen + 5% tolerance system lumen efficiency of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 K, ANSI, CRI 80, driver efficiency > 85%, Life expectancy of driver min 30000 hrs. PF 0.95 at full load/230 volt AC | 12 | Each | |
102 | 81 | E 190732\nP&F fluorescent tube rod in existing fixtures as required T - 5 lamps 28 watt gr. 1 | 5 | Each | |
103 | 82 | E304407\nP/F IP-65 protected LED street light luminare on existing bracket. Fixture made of powder coated single piece pressure die cast aluminium with heat dissipation fins on housing with UV stabillized PC/Toughened Glass cover (from 45W onwards) and should be secondary lens on each LED. The system level luminiare efficacy>= 100 with high power LEDs of CREE/NICHIA/OSRAm/PHILIPS/ SEOUL make is to be used. The LED Driver shall be BIS certified and inpur voltage AC 110 to 270 V AC with input Frequency 50Hz ± 3% Power Factor>0.95 Driver efficiency >85%,THD(1)<10% Humidity 10% to 90% RH working temp -20C to 50C. Life Expectancy Equal or more than 50000 burning hrs with minimum 70% initial lumens maintained, Rendering Index>75%,Surge protection shall be min= 5 KV internal and min 10 KV external. Manufacturers Word MARK/Name Engraved /Embossed on die cast housing to allow traceability/authenticity till life of fixture. Fixture shall be CE complianed. Led street light fixture\n90 watt | 2 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail