}

Special Repair Of Dam And Civil Work Of Its Different Components In The Getalsud Reservoir Scheme , Dist . - Ranchi . , Ranchi-Jharkhand

Water Resources Department-WRD has published Special Repair Of Dam And Civil Work Of Its Different Components In The Getalsud Reservoir Scheme , Dist . - Ranchi . . Submission Date for this Tender is 11-02-2021. Dam Work Tenders in Ranchi Jharkhand. Bidders can get complete Tender details and download the document.




Tender Notice

26697161
Corrigendum : Special Repair Of Dam And Civil Work Of Its Different Components In The Getalsud Reservoir Scheme , Dist . - Ranchi .
Open Tender
Indian
Jharkhand
Ranchi
11-02-2021

Tender Details

Special Repair Of Dam And Civil Work Of Its Different Components In The Getalsud Reservoir Scheme , Dist . - Ranchi .

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 23-Jan-2021 Corrigendum1 Technical Bid 11-02-2021

Key Value

Document Fees
INR 10000 /-
EMD
INR 675700.0 /-
Tender Value
INR 6.75 Crore /-

BOQ Items

Name of Work: Special Repair of Dam & Civil Work of its different components in the Getalsud Reservoir Scheme, Dist.- Ranchi
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Labour charge for taking out disturbed boulder from boulder pitching or rip-rap or rock toe etc. and cleaning the surface and stacking the same within a lead of 100M as per specification and direction of E/I. Item01 8621.6 Per m3
2 2 Supply of stone boulder of size 300 mm for pitching Item02 2615.84 Per m3
3 3 Supplying of close graded granular sub-base material 37.5 mm to 9.5 mm Item03 832.94 Per m3
4 4 Supplying of coarse sand Item04 832.94 Per m3
5 5 Labour for laying fine filter (sand) or coarse dry graded filter either of jhama khoa or stone metal or stone chips under brick pitching or boulder pitching in slope and apron including light ramming etc. all complete as per specification and direction of E/I. Item05 1665.88 Per m3
6 6 Labour charges for pitching on apron slope of bank with stone boulders duly packed (uncrated) complete job (materials within 150M and all lifts as per specification and direction of E/I. Item06 8621.6 Per m3
7 7 Jungle clearance including weeding out shurbs and small trees upto 150mm dia and their removal as per specification and direction of E/I. Item07 40094.1 m2
8 8 Supplying and laying 300mm thick humus layer on slopes of dam with manual compaction and turfing the surface with approved dub grass with 1 Km lead including watering and ramming till growth of of the grass all complete as per specification and direction of E/I. Item08 14047.6 100 m2
9 9 E/W in excavation of foundation trenches as per designed section in all kinds of soil, including moorum soil, soil mix with kankar, pebbles and boulders upto 300mm size and disposal of the same ( beyond 50m away from the toe of dam in the country side) within initial lead of 150m and initial lift of 1.5m all lifts as per specification and direction of E/I. Item09 1460 M3
10 10 Earthwork in excavation of foundation trenches in ordinary soil (vide classification of Soil Item- A) and disposal of excavated earth so obtained to a distance upto 50M and average lift of 1.5M including levelling ramming the foundation trenches removing the roots or shurbs etc. all complete job as per specificationand direction of E/I. Item10 1518.5 M3
11 11 Distmantling pucca brick or lime work including stacking seniceval material in coun table staks within 15M lead and disposal or unserviceble materials with all lead all complete as per direction of E/I. Item11 1114.94 M3
12 12 Distmentling plain cement or lime concrete work including stacking serviceble material in countable stacks within 15M lead and disposed or unserviceble materials with all lead all complete as per direction of E/I. Item12 421.18 M3
13 13 Providing and laying clean sand in filling in foundation trenches including ramming as well as royalty and all taxes etc. as per specification and direction of E/I. Item13 1453.62 M3
14 14 Providing and laying PCC or RCC M-150 with nominal mix of (1:2:4) in various components of dam foundation with approved quality of 20mm graded coarse aggregate of required grade as per design & approved quality of sand of requisite FM (2.5 to 3.0) washed and screened excluding cost of shuttering or form work as well of reinforcement its cutting, bending, binding an placing but including necessary tools & platns and vibrating curring royalty all taxes etc. complete job as per specification and direction of E/I. Item14 832.57 M3
15 15 Providing rough dressed random rubble stone masonory in cement mortar (1:4) in foundation with approved quality of sand coarse sand of requisite FM (2.5 to 3.0) washed and screened with raking out joints curring scaffolding and its removal whenever required including royalty and all taxes etc complete job as per specification and direction of E/I. Item15 3259.33 M3
16 16 Providing 25mm thick cement plaster (1:4) with approved quality of sand of requisite FM (2.5 to 3) washed and sreened including curring scaffolding all taxes etc. complete job as per specification and direction of E/I. Item16 10965.9 M2
17 17 Providing 1.5mm thick cement punning including curring etc complete job as per specification and direction of E/I. Item17 10965.9 M2
18 18 Earth work in filling foundation trenches or back filling of masonry structure with suitable earth in layers not exceeding 150mm thick well watered rammed and fully completed and finally dressed with earth obtained from excavation of foundation trenches and kept at a lead of 30m and initial lift of 1.5m complete as per specification and direction of E/I. Item18 212.019 M3
19 19 Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 metres. Item19 219 m2
20 20 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Item20 2190 m3
21 21 Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. Item21 10950 m2
22 22 Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. Item22 10950 m2
23 23 Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.\n Item23 547.5 m3
24 24 Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects Item24 328.5 m3
25 25 Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. Item25 600 m2
26 26 Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. Item26 1650 m3
27 27 Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing Item27 3.6 m2
28 28 Labour charges for stone boulders (uncrated) laying in launching apron and slope materials within 150M and all lifts in water where boat is used as per specification and direction of E/I. Item28 1188 Per m3
29 29 Providing and laying P.C.C. M-200 with nominal mix of (1:1.5:3) in wearing coat over deck slab with approved quality of 20 mm. graded coarse aggregate of required grade (as per design ) and approved quality of sand of requisite F.M. (2.5 to 3.0) washed and screened including necessary tools and plants, vibrating, curing, royalty and all taxes etc. excluding cost of form work complete job as per specification and direction of E/I. Item29 95.1 M3
30 30 Providing 25 mm T.M.T. reinforcement (Tor steel) as per approved design, drawing, removal of rust, cutting, bending, binding including supplying annealed wire, placing M.S. rods in position all complete as per specification and direction of E/I. Item30 0.776 MT
31 31 Providing and fixing in position 20mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20mm, covered with sealant complete as per drawing and technical specification. Item31 88.42 m
32 32 Burried joint (providing and laying a burried expansion joint, expansion gap being 20mm , covered with 12mm thick , 200mm wide galvenised wieldable structural steel plate as per IS: 2062 placed symmetrical to centre line of the joint, resting freely over the top surface of the deck concrete, welding of 8mm dia 100mm long galvanised nails spaced 300mm c/c along the center line of the plate, all as specified in clause 2604.) Item32 88.42 m
33 33 Disrnantling old plaster and pointing in cement or lime and raking out joints to 15mm. depth, watering and disposal of unserviceable materials with all leads all complete as per\ndirection of E/I. Item33 958.5 m2
34 34 Providing 25mm thick cement plaster (1:4) with approved quality sand of requisite F.M. (2.5 to 3.0) washed and screened and its removal, royalty and all taxes etc. complete job as per specification and direction of E/I. Item34 6390 m2
35 35 Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plarstered surface by rubbing smooth with pumice stone or fine sand paper, appiying putty whicherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. Item35 219.37 m2
36 36 Cement washing Two coat with ordinary portland cement including cost of cteaning the surface thoroughly, scaffolding, curing, washing the floor and taxes all complete as per building specification and direction of E/I. Item36 10670.6 m2
37 37 Earthwork in excavation in foundation trenches in ordinary soil ( vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling,ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design, building specification and direction of E/I. Item37 60.202 m3
38 38 Providing coarse clean sand in filling in foundation trenches or in plinth including rammrng and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/l ( Mode of measurement compacted volume). Item38 819.31 m3
39 39 Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per bLrilding specification and directton of E/I. Item39 112.529 m2
40 40 Providing P.C.C.M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering mixing cement concrete in mixer and placing in position vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of Engineer-in-charge. Item40 8.237 m3
41 41 Providing R.C.C. M 200 with nominal mix of (1:1.5:3 ) in foundation and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete as per building specification and direction of E/l. Item41 6.18 m3
42 42 Providing R.C.C.M - 200 with nominal mix of (1:1.5:3 ) in lintel with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete as per building specification and direction of E/l. Item42 2.53 m3
43 43 Providing and laying P.C.C or R.C.C.M - 150 with nominal mix of (1:2:4 ) in various components of dam foundation with approved quality of 20 mm to 6 mm graded coarse aggregate of required grade as per design and approved quality of sand of requisite F.M. 2.5 to 3 washed and screened excluding cost of shuttering or form work as well as reinforcement, its cutting, bending, binding and placing but including necessary tools and plants and vibrating, curing, royalty complete job as per specification and direction of E/l. Item43 71.89 m3
44 44 Providing R.C.C.M - 200 with nominal mix of (1:1.5:3 ) in Stiffners with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete as per building specification and direction of E/l. Item44 3.01 m3
45 45 Providing R.C.C.M - 200 with nominal mix of (1:1.5:3) in beam of all types with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete as per building specification and direction of E/l. Item45 3.88 m3
46 46 Providing designation 75 A brickwork in C.M. (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, rakinq out joints to 15mm depth, curing. taxes and royalty all complete as per building specification and direction of E/l. Item46 9.121 m3
47 47 Proviciing 25 mm. thick damp proof course with cement concrete M-150 with nominal mix of (1:2:4 ) with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, and mixing cement concrete in mixer with 5% cico or any other approved water proffing compound and placing in position, striking, curing, taxes and Royalty all comlete as per building specification and direction of E/I. Item47 14.51 m2
48 48 Providing designation 75 A brickwork in C.M. (1:6 ) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials,scaffolding, rakinq out joints to 15mm depth, curing. taxes and royalty all complete as per building specification and direction of E/l Item48 34.74 m3
49 49 Providing R.C.C.M - 200 with nominal mix of (1:1.5:3 ) in Roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete as per building specification and direction of E/l. Item49 10.33 m3
50 50 Providing av. 63mm thick R.C.C.M - 200 with nominal mix of (1:1.5:3 ) in chajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering mixing cement concrete in mixer and placing in position, vibrating, striking 6mm cement plaster (1:4) in ceiling and sides of chajja with sand of F.M. 1.5 curing (but excluding the cost of reinforcement, taxes and royalty all complete as per building specification and direction of E/l. Item50 9.15 m2
51 51 Providing Tor steel reinforcement of 8mm dia rods TMT Fe 500 (only valid for Sail and Tata steel). as per approved design and drawing excluding carriage of bars to work site, cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
52 51.01 8 to 10MM dia Item52 1.559 MT
53 51.02 12mm & above Item53 0.977 MT
54 52 Supplying,frtting and fixing M.S. grill made of 20x6cmm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) Item54 728.05 Kg
55 53 Supplying,fitting and fixing M.S. grill gate with M.S. grills made of 20xGmm M S. flats or 16mm. M.S. square bars fitted on25x25x 6mm. M.S. Angle frame -do- (when steel is not supplied by the deptt.). Item55 112 Kg
56 54 Supplying fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I. Item56 0.63 m3
57 55 Supplying fitting and fixing 35mm thick solid core type non decorative double leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with Aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l. Item57 9.46 m2
58 56 Supplying fitting and fixing 32mm thick good quality, well dressed and well seasoned salwood 1/3rd glazed and 2/3rd paneled shutters in doors and window with 20mm thick panel with one side plain and other side chamfered with aluminium fittings such as hinges, sliding doors, bolts. tower bolts,Handles and rings, hooks and eyes, cleats, sand blocks as per schedule and 3mm thick plain glass panes fitted with teak wood leads and taxes all complete as per building specification and direction of E/I. Item58 6.48 m2
59 57 Supplying,fitting and fixing 150x20x6mm L-type M.S.clamp properly fishtailed, including making holes and setting the including making holes and setting the same in 200x125x75 mm Cement concrete block (1:2:4) with cost of all labour and materials and taxes as per building specification and direction of E/I. (5.5.10) Item59 52 Nos.
60 58 Providing and fixing fan hook of 16 mm dia M.S. bar 1 metre long bent to required size and shape,placed in position and fixed in R.C.C slab/beam at the time of casting all complete as per building specification and direction of E/I. (where material is not supplied by deppt.) Item60 6 Nos.
61 59 Providing 6 mm. cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. Item61 75.23 m2
62 60 Providing 12 mm. cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. Item62 373.21 m2
63 61 Providing 1.5mm. cement punning including curing, carriage of water With all leads and Iifts as per building specification and direction of E/I. Item63 39.245 m2
64 62 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete Item64 373.21 m2
65 63 Finishing walls with Acrylic Smooth exterior paint of required shade - New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)( Item65 153.84 m2
66 64 Providing two coats of snowcem of approved shade and make over old surface including washing, cleaning and preparing the wall scaffolding, curing and taxes all comple as per building specification and direction of E/I Item66 6390 m2
67 65 Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including preparing the surface after cleaning,removing dirt scales. smokes grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/I. Item67 45.69 m2
68 66 Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. (Mode of measurement Area shall be multiplied by the co-efficient as indicated in bullding specification). Item68 44.89 m2
69 67 Providing one coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/l. Item69 44.89 m2
70 68 Providing and laying vitrified floor tiles in Size of 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Item70 70.33 m2
71 69 Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) Raj Nagar 8 mm thick Item71 75.38 m2
72 70 Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. Item72 66.45 m2
73 71 Providing and fixing on wall face unplasticised Rigid 110mm dia PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Item73 14 M
74 72 Providing and fixing water closet sqatting pan(indian type W.C Pan) with 100mm sand cast iron P or S trap ,10 litre low level white PVC flushing cistern,including flush pipe,with manually controlled device (handle lever) conforming to IS 7231,with all fitting and fixtures complete icluding cutting and making good the walls and floors wherever required. (17.1.1) white vitreous China Orrisa pattern W.C pan of size 580x440 mm with integral type foot rests Item74 3 Each
75 73 Providing & placing on terrace (at all floor levels) polytheline water storage tank, IS 12701 marked , with cover and suitable locking arrangement and making necessary holes for inlet cum outlet and overflow pipes but without fittings and the base support for tank . Item75 500 Litre
76 74 Providing and fixing PTMT / C.P. Soap Dish Holder having length of 138 mm breadth 102mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 106 gms Item76 5 Each
77 75 Providing and fixing Wash basin with C.I./M.S. brackets, 15mm C.P. pillar cock 32mm C.P. brass waste of cutting and making good the wherever require. Falt back wash basin size 550x400 mm with single 15mm pillar trap Item77 4 Each
78 76 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
79 76.01 15mm dia nominal bore G.I. pipe Item79 30 M
80 76.02 25mm dia nominal bore G.I. pipe Item80 30 M
81 77 Extra for earth work in hard soil as per specification and direction of E/I. (vide classification of soil item-B) Item81 36.042 M3
82 78 Providing designation 75A brick work in CM (1:4) in foundation and plinth with approved quality of clean coarse sand of FM 2 to 2.5 including providing 10 mm thick mortar joints cost of screening materials raking out joints to 15 mm depth curing taxes and royalty all complete as per building specification and direction of E/I. Item82 4.94 M3
83 79 Providing 12 mm thick water proof cement plaster (1:3) with clean coarse sand of FM. 1.5 with 5% cico or any other approved water proofing compount including screening, curing with all lead and lifts of water scafolding taxes and royalty all complete as per building specification and direction of E/I. Item83 22.335 M2
84 80 Point wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with modular type switch, pheonlic lamineted sheet,suitable size G.I.box etc.
85 80.01 Group A Item85 25 Point
86 81 Power plug wiring in PVC conduit (2x4 sq mm) :- Wiring for light/Power plug with 2x4 sq mm FR PVC insuleted copper conductor single core cable in recess PVC conduit along with 1 Nos. 4 sq mm FR PVC insuleted copper conductor single core cable for loop earthing as required. Item86 45 Metre
87 82 Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required
88 82.01 2x1.5 sq mm+1x1.5 sq mm earth wire Item88 56 Metre
89 82.02 2x2.5 sq mm+1x2.5 sq mm earth wire Item89 48 Metre
90 82.03 2x10 sq mm+1x10 sq mm earth wire Item90 11 Metre
91 83 S/F modular type switch /socket :- Supplying and fixing following modular type switch box/cover including connections but excluding modular plate etc as required
92 83.01 5/6 amps, one way switch Item92 3 Each
93 83.02 15/16 amps, one way switch Item93 2 Each
94 83.03 5/6 amps, 3 pin socket outlet Item94 3 Each
95 84 S/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connectionons but excluding modular plate etc, as required. Item95 4 Each
96 85 S/F Modular type blanking plate:-Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc, as required. Item96 6 Each
97 86 S/F Modular base & cover plate:-Supplying and fixing following modular base and cover plate on existing modular metal box etc, as required.
98 86.01 1/2 module Item98 1 Each
99 87 S/F light plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch conection painting etc, as required. Item99 2 Each
100 88 S/F power plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch conection painting etc, as required. Item100 2 Each
101 89 S/F ceiling rose:-\nSupplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required. Item101 10 Each
102 90 S/F Batten holder:-\nSupplying and fixing batten/angle holder including connection etc, as required. Item102 7 Each
103 91 ITC ceiling/wall fan:-\nInstaliation, testing and commissioning of ceiling fan including wiring the down rod of standard length( uptwo 30 cm) with 1.5 sq mm.FR PVC insulated copper conductor, single core cable etc as required Item103 4 Each
104 92 ITC exhaust fan up to 450 mm, sweep:-\nInstallation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required. Item104 3 Each
105 93 S/F S.P. MCB DB:-\nSupplying and fixing following way single pole nutral,sheet,MCB distribution board,240 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR)
106 93.01 8 Way,Double door Item106 1 Each
107 94 S/F 'B' series. S.P.MCB:-\nSupplying and fixing 6 amps to 32 amps rating,240 volts, 'B' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
108 94.01 6/32 amps,single pole, "B" SERIES Item108 3 Each
109 95 S/F 'C' series. S.P.MCB:-\nSupplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
110 95.01 6/32 amps,single pole, "C" SERIES Item110 3 Each
111 96 P/F M.V. danger notice plate:-\nProviding and fixing M.V danger notice plate of 200mm x150mm made of mild steel, at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in single red coiour on front side as required. Item111 1 Each
112 97 S/L 8 SWG copper wire ground :-\nSupplying and laying 8 SWG copper wire 0.50 metre bellow ground level for conductor earth electrode, including soldring etc. as required. Item112 10 Metre
113 98 Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required Item113 1 Each
114 99 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
115 99.01 2 X 16 sq. mm (22mm) Item115 2 Each
116 100 Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. Item116 3 Each
117 101 Providing of 12'' (300 mm)exhaust fan of make bajaj/havells/usha/crompton Item117 3 Each
118 102 Providing of 48'' (1200 mm) ceiling fan of make bajaj/havells/usha/crompton Item118 4 Each
119 103 Providing of LED street light (25 watt) of make bajaj/havells/crompton Item119 2 Each
120 104 Supply of LED batten (20/22 watt) of make bajaj/havells/crompton Item120 6 Each
121 105 Supplying and fixing of LED 15/16 W of make bajaj/havells/crompton Item121 7 Each
122 106 Supply /fitting/fixing of 50 mm dia chemical Earthing Electrode 3 mtr length ,Backfill compound chemical 4 bag (per bag 25 kg), Earth cutting removing and installation charge as. required. OF MAKE POWERGRIP EARTHING ELECTRODE. RANCHI/ELECTROGRIP RANCHI Item122 1 Set
123 107 Provision of an Reinforced cement concrete crash barrier at the edges of the road, approachs to bridge structures and medians, constructed with M20 grade concrete with HYSD reinforcement confirming to IRC : 21 and dowel bars 25mm dia 450mm long at expansion joints filled with pre moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in thre enclosure to MOST Circular No. RW/NH 33022/1/94-DO III dated 24 June 1990 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified Item123 800 Per M
124 108 Carriage of Materials
125 108.01 Stone Boulder from Chutupalu 28Km (1K + 27P) Item125 5875.17 M3
126 108.02 Metal from Chutupalu 28Km (1K + 27P) Item126 1700.16 M3
127 108.03 Stone boulder Departmental stock lead 1 Km pucca Item127 1188 M3
128 108.04 Cement (lead 40 Km) Item128 974.178 MT
129 108.05 Steel (lead 40 Km) Item129 3.312 MT
130 108.06 Sand (lead 60 Km) Item130 5213.27 M3
131 108.07 Chips (lead 28 Km) Item131 4203.75 M3
132 108.08 Bricks (lead 8 Km) Item132 24182 %0 Nos
133 109 DSR AMOUNT(NOT APPLICABLE FOR GST) Item133 1 Nos.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail