}

Construction Of Warehouse For Storage Of Evms & Vvpats At Kamareddy In Kamareddy District.(2Nd Call), KAMAREDDY-Telangana

Road And Building Department-RBD has published Construction Of Warehouse For Storage Of Evms & Vvpats At Kamareddy In Kamareddy District.(2Nd Call). Submission Date for this Tender is 29-01-2021. Storage and Warehousing Tenders in KAMAREDDY Telangana. Bidders can get complete Tender details and download the document.




Tender Notice

26690243
Construction Of Warehouse For Storage Of Evms & Vvpats At Kamareddy In Kamareddy District.(2Nd Call)
Open Tender
Indian
Telangana
KAMAREDDY
29-01-2021

Tender Details

Construction Of Warehouse For Storage Of Evms & Vvpats At Kamareddy In Kamareddy District.(2Nd Call)

Key Value

Document Fees
Refer document
EMD
INR 59200.0 /-
Tender Value
INR 59.17 Lakhs /-

BOQ Items

S.No Subwork Name Specification Number Quantity UOM Rate(INR) Amount(INR)
1 BOQ 308.0 162.00 One Cubic Metre 404.00 65448.00
Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mannual Means.
2 BOQ 309 & 310 122.00 One Cubic Metre 46.00 5612.00
Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310)
3 BOQ 309 & 310 153.00 One Cubic Metre 231.00 35343.00
Filling with carted gravel in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).
4 BOQ 402.0 10.85 One Cubic Metre 4526.00 49107.00
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING
5 BOQ 402.0 43.00 One Cubic Metre 4320.00 185760.00
Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, all charges for mixing, laying concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No. 402) MACHINE MIXING
6 BOQ 601 & 615 34.00 One Cubic Metre 4365.00 148410.00
Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard Granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., to site, labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing and cost of overheads & contractors profit etc., complete for finished item of work in foundation and basement. (APSS No. 601 & 615).
7 BOQ As directed by Engineer-in-Charge 19.00 One Square Metr 96.00 1824.00
Flush Pointing to RR/ CRS Masonry in CM (1:3) including cost and conveyance of all materials in site, curing, labour charges etc, and overheads & contractors profit, complete for finished item of work.
8 BOQ 402.0 54.27 One Cubic Metre 10307.00 559361.00
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR FOOTINGS.
9 BOQ 402.0 5.00 One Cubic Metre 10909.00 54545.00
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMN PEDASTALS
10 BOQ 402.0 16.75 One Cubic Metre 12890.00 215908.00
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR PLINTH BEAMS
11 BOQ 402.0 9.60 One Cubic Metre 13422.00 128851.00
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS
12 BOQ 402.0 1.00 One Cubic Metre 13383.00 13383.00
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR LINTELS
13 BOQ 402.0 20.00 One Cubic Metre 11994.00 239880.00
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR ROOF BEAMS
14 BOQ 402.0 14.00 One Square Metr 1437.00 20118.00
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR SLAB 125MM THICK
15 BOQ 402.0 290.00 One Square Metr 1607.00 466030.00
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR SLAB 150MM THICK
16 BOQ 402.0 12.00 One Square Metr 1794.00 21528.00
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR SLAB 175MM THICK
17 BOQ 402, 403 & 903 2.75 One Square Metr 1059.00 2912.00
Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., for 60 cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting concrete, laying concrete, curing, cost of overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work for sunshades (APSS No. 402, 403 & 903)
18 BOQ 402.0 0.70 One Cubic Metre 7229.00 5060.00
Plain Cement Concrete corresponding to M-20 grade as per IS 456 nominal mix using 20mm size graded aggregate machine crushed hard granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, all operational, incidental and labour charges such as mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work, for:-Machine Mix-PCC : M-20 NOMINAL MIX Centering with Steel up to 3.66M. FOR STEPS.
19 BOQ 501 & 504 87.00 One Cubic Metre 6823.00 593601.00
Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contractors profit etc., complete for finished item of work. (APSS No. 501 & 504).
20 BOQ 509.0 30.00 One Square Metr 771.00 23130.00
Reinforced Masonry for partition walls (100mm thick) in CM(1:4) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sqcm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contractors profit etc., complete but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. 509).
21 BOQ 402.0 0.50 One Cubic Metre 5890.00 2945.00
Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks for finished item of work. (APSS No. 402): HAND MIXING
22 BOQ 126.0 15.00 One Metric tonn 65067.00 976005.00
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured byTATA Steel, SAIL, VSP, JSW Steel, Shyam steel as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)
23 BOQ 126.0 0.50 One Metric tonn 61488.00 30744.00
Providing Mild Steel (MS) steel bars (Fe 250 grade as per IS 432) of different diameters including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-slicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work in all floors ( APSS No.126)
24 BOQ 901,903 & 904 329.00 One Square Metr 480.00 157920.00
Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)
25 BOQ 901,903 & 904 810.00 One Square Metr 460.00 372600.00
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)
26 BOQ 701 & 703 246.00 One Square Metr 628.00 154488.00
Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick 0.457m x 0.304m or any other size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701) - Flooring
27 BOQ 701 & 703 13.00 One Square Metr 628.00 8164.00
Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick 0.457m x 0.304m or any other size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701) - Treads
28 BOQ 701 & 707 18.23 One Square Metr 691.00 12594.00
Providing skirting to internal walls to 10.00 cm height with Polished Shahabad/Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete and overheads & contractors profit complete for finished item of work.(APSS No.701 &707) - Skirting
29 BOQ 701 & 707 7.00 One Square Metr 691.00 4837.00
Providing skirting to internal walls to 10.00 cm height with Polished Shahabad/Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete and overheads & contractors profit complete for finished item of work.(APSS No.701 &707) - Risers
30 BOQ 701 & 707 16.00 One Square Metr 856.00 13696.00
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed) excluding seigniorage charges on all materials but including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., including overheads and contractor profit complete for finished item of work. (APSS No.707 & 701)
31 BOQ 701 & 707 63.00 One Square Metr 780.00 49140.00
Dadooing to walls with digital / polished glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, excluding seigniorage on materials but including all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.
32 BOQ As directed by Engineer-in-Charge 7.00 One Square Metr 12660.00 88620.00
Providing and fixing of Scientific doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with zinc of 120 GSm). coated with zinc phosphate primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100*58*1.2 mm thick, shutter section of 0.80mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fullu flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6" Tower bolt-2 Nos, 6" D handles-2 Nos, 10" aldrops-1No, Butt hinges-6Nos, Mortise Lock of approved quality-1No, frames fixed to the concrete/masonry wall by means of self expanding screws including all labour charges, overheads and contractors profit etc., complete for finished item of work for Double leaf Door (5\*7\)
33 BOQ 1001 & 1002 1.94 One Square Metr 5054.00 9805.00
Supplying and fixing DOUBLE SHUTTER DOOR using solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast and Flush door shutters of 35 mm thick solid bond wood block board type with commercial ply ON BOTH faces conforming to IS:2202 as per drawing including cost of Mild Steel Powder Coated fixtures of 2 No tower bolt of 250x10mm dia, 1 No. Aldrops - 300 mm long, 1No. Latche-300mm long, 4 Nos. handles of 150 mm size & 2 No. heavy duty door stopper, 2 no rubber bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc.cost of overhead & contractor\s profit complete for finished item of work as per APSS 1001 & 1002(Double Shutter Door) (3\x7\)
34 BOQ 1001 & 1002 7.46 One Square Metr 4721.00 35219.00
Supplying and fixing SINGLE shutter door using solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast and flush door shutters of 35mm thick solid bond wood block board type with commercial ply ON BOTH faces conforming to IS:2202, including cost of Aluminium fixtures, 1 No tower bolt of 250x10mm dia, 1 No. Aldrops - 300 mm long, 1No. Latche-300mm long, 3 Nos. Hinges-125 mm long and 2 Nos. handles of 150 mm size, 1 no. rubber bush & 1 No. heavy duty door stopper including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, cost of overheads & Contractor\s profit etc., complete for finished item of work as per APSS 1001 & 1002 (Single Shutter Door) (3\x7\)
35 BOQ As directed by Engineer-in-Charge 8.00 One Square Metr 756.07 6049.00
Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast and including Flush door shutters of 30 mm thick solid bond wood block board type with commercial ply ON BOTH faces conforming to IS:2202 and providing and fixing PVC door cladding to the flush doors shutter it shall be pasted with synthetic glue 1 mm thick including cost of Aluminium fixtures 1 No tower bolt of 250x10mm dia, 1 No. Aldrops - 300 mm long, 1 No. Latch - 300 mm long, 2 Nos. handles of 150 mm size and 3 nos of butt hinges of 125mm including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, overheads & contractors profit etc., complete for finished item of work. (Door size: 0.76m x 2.13 m)
36 BOQ SS 1105 5.20 One Square Metr 3938.00 20478.00
Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm with 38 mm Diameter steel pulleys, the top, bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer including cost and conveyance of all materials to work site and all operational, incidental labour charges, power charges, overheads & contractors profit etc., complete for finished item of work. as per special Spec 1105
37 BOQ As directed by Engineer-in-Charge 5.10 One Square Metr 7419.00 37837.00
Providing and fixing of Open able / Casement Windows with fly mesh made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277, finish painted with a polyester paint and section for outer frame of 100 x 45 mm, centre mullion of 100 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, section for fly-shutter of 52 x 25 mm x 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade and mullions to have double rebate for glazed shutter and flyshutter with a provision for guard bars/grills and the sections, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6? (152.4mm) pitch etc., complete for 5?0 x 4?0 ( 1524 x 1219.2mm) and 6?0 x4?0 ( 1829.6 x 1219.2mm) including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractors profit, etc. complete for finished item of work
38 BOQ As directed by Engineer-in-Charge 0.40 One Square Metr 7080.00 2832.00
Providing and fixing of Casement/ Open able Windows made of pre-painted steel as per IS 513 of 0.58 mm thick galvanized as per IS 277, finish painted with a polyester paint and section for outer frame of 48 x 50 mm, centre mullion of 48 x 50 mm, section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12 mm and the outer frame and mullions to have rebate for glazed shutter with a 20 mm provision for guard bars/grills, handle, stay, 2 nos. of stainless steel heavy duty pivot hinges provided per shutter and windows fitted with 5 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10mm Square guard bars with 6? (152.4mm) pitch etc., complete Double shutter Window with vertical mullion for sizes 3?0? x 4?0? (914.4mm x 1219.2mm) and 4?0? x 4?0? (1219.2mm x 1219.2mm) including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractors profit, etc. complete for finished item of work
39 BOQ As directed by Engineer-in-Charge 2.00 One Square Metr 5468.00 10936.00
Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre - painted steel as per IS 513 of -0.58 mm thick \D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work for (i) Ventilators: Fixed louvers 2\-0 x 2\-0 (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm and (ii) Ventilators: Fixed louvers 4\-0 x 2\-0 (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm and (iii) Ventilators: Fixed louvers 4\-0 x 3\-0 (1219.2 x 914.4 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractors profit, etc. complete for finished item of work
40 BOQ 912.0 249.00 One Square Metr 235.00 58515.00
Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats.
41 BOQ 912.0 883.00 One Square Metr 131.00 115673.00
Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer.
42 BOQ 1200, 1207 & 1211 22.00 One Square Metr 181.00 3982.00
Painting to flush shutters two coats of ready mixed synthetic enamel paint Grade-I of approved shade having VOC (Volatile organic compound)content less than 50 grams/liter over wood primer coat including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper for neat finish etc., complete and including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.
43 BOQ 1200, 1207 & 1211 10.00 One Square Metr 110.00 1100.00
Painting to new iron works with 2 coats of approved synthetic enamel paint of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including cost of overheads & contractors profit for finished item of work for:-Painting to Iron work - Synthetic enamel paint to New Iron Work - 2 coats
44 BOQ As directed by Engineer-in-Charge 0.36 One Square Metr 1928.00 694.00
Supplying and fixing ornamental MS Grills including fabrication and erection in position using alround frame of 25mm X 6mm MS flat welded with 10mm square bars placed at 4" c/c fixed in both horizontal and vertical directions including cost and conveyance of all materials to work site and all operational, incidental labour charges, power charges, overheads & contractors profit etc., complete for finished item of work.
45 BOQ 1200, 1207 & 1211 0.36 One Square Metr 170.00 61.00
Painting to new iron works with 2 coats of Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over 1 coat of Red Oxide Primer Paint for iron works of Grade -1 of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site including cost of primer coat and all operational, incidental, labour charges etc. complete etc., complete including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.
46 BOQ As directed by Engineer-in-Charge 4.00 Each 9313.00 37252.00
Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 with \P\ or \S\ trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make, including cost and conveyance of all materials, overheads and contractor\s profit etc. complete for finished item of work in all respects: white colour
47 BOQ As directed by Engineer-in-Charge 8.00 Each 1266.00 10128.00
Supply and fixing of white glazed flat back bowl urinals of size 440 mm x 265 mm x 315 mm with internal rim flushing mm fixied with screws complete inidan make (HS W/Parry/Neycer) conforming to IS 2556 -1995, fitted with 15mm brass body CP finish self closing tap push type conforming to IS 1711 and 30mm nominal size dia PVC flexible waser pipe of 914.40 mm lenght of 1st quality including cost and conveyance of all materials, overheads and contractor\s profit etc., complete for finished item of work in all respects
48 BOQ As directed by Engineer-in-Charge 5.00 Each 2567.00 12835.00
Supplying & Fixing Indian make WHITE Flat Back Wash Hand Basin of size 550 x 400 mm with Single C.P. Pillar cock 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/ Nice/ Esso or equivalent, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded onforming to IS 8931, 15 mm nominal size PVC connection with brass union nut C.P coated, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality and standard CI brackets including wooden block, including cost and conveyance of all materials, overheads and contractor\s profit etc. complete for finished item of work in all respects.
49 BOQ As directed by Engineer-in-Charge 5.00 Each 1235.00 6175.00
Supplying and Fixing Pedestal for Wash Hand Basin including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work.
50 BOQ As directed by Engineer-in-Charge 1.50 One Running Met 852.00 1278.00
Supply and fixing of 4" * 24" (101.60 * 609.60 mm) white glazed porcelain channel fixed in brick masonry white cement pointing including cost and conveyance of all materials, overheads and contractor\s profit etc., complete for finished item of work in all respects
51 BOQ As directed by Engineer-in-Charge 4.00 Each 3398.00 13592.00
S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty including overheads & contractors profit complete for finished item of work.
52 BOQ As directed by Engineer-in-Charge 5.00 Each 173.00 865.00
S&F 25mm nominal size dia & 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws, including cost and conveyance of all materials to site all operational, incidental labour charges, overheads and contractor\s profit etc., complete for finished item of work
53 BOQ As directed by Engineer-in-Charge 5.00 Each 539.00 2695.00
S&F TV shape mirror with plastic frame size 609.6mm x 457.20 mm best quality glass mirror with approved make 1st quality including cost & conveyance of all materials, labour charges, overheads and contractor\s profit complete for finished item of work in all floors as directed by Engineer-in-charge
54 BOQ As directed by Engineer-in-Charge 7.00 Each 1943.00 13601.00
S&F of 16mm to 20mm thick polished marble slab partitions of size 3\0" x 2\0" for urinals including full rounding the edges, fixing in position, polishing, including cost & conveyance of all materials, labour charges, overheads and contractor\s profit complete for finished item of work in all floors excluding cost of seigniorage charges on marble as directed by Engineer-in-charge
55 BOQ As directed by Engineer-in-Charge 8.00 Each 815.00 6520.00
S&F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight quarter turn spindle with internal/external threaded conforming to IS 8931 including overheads & contractors profit complete for finished item of work
56 BOQ As directed by Engineer-in-Charge 8.00 Each 662.00 5296.00
S&F of 15 mm CP finish brass concealed stop valve of not less than 400 grams weight quarter turn spindle conforming to IS 89 with internal threaded conforming to IS 8931, cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work
57 BOQ As directed by Engineer-in-Charge 8.00 Each 117.00 936.00
S&F of 15 mm nominal size PVC connection with brass union nut C.P coated including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work
58 BOQ As directed by Engineer-in-Charge 50.00 One Running Met 212.00 10600.00
Supplying, laying and jointing Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete, with necessary excavation in all types of soils (except rock requiring blasting) refilling, chiseling masonry walls and making good the walls and floors to the original surface, fixing M.S. clamps and T.W. block on walls wherever required, Brick support pillars on terraces etc including cost & conveyance of all materials, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge. 15mm Nominal Bore
59 BOQ As directed by Engineer-in-Charge 50.00 One Running Met 237.00 11850.00
Supplying, laying and jointing Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete, with necessary excavation in all types of soils (except rock requiring blasting) refilling, chiseling masonry walls and making good the walls and floors to the original surface, fixing M.S. clamps and T.W. block on walls wherever required, Brick support pillars on terraces etc including cost & conveyance of all materials, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge. 20mm Nominal Bore
60 BOQ As directed by Engineer-in-Charge 50.00 One Running Met 310.00 15500.00
Supplying, laying and jointing Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete, with necessary excavation in all types of soils (except rock requiring blasting) refilling, chiseling masonry walls and making good the walls and floors to the original surface, fixing M.S. clamps and T.W. block on walls wherever required, Brick support pillars on terraces etc including cost & conveyance of all materials, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge. 25mm Nominal Bore
61 BOQ As directed by Engineer-in-Charge 40.00 One Running Met 487.00 19480.00
Supplying, laying and jointing Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete, with necessary excavation in all types of soils (except rock requiring blasting) refilling, chiseling masonry walls and making good the walls and floors to the original surface, fixing M.S. clamps and T.W. block on walls wherever required, Brick support pillars on terraces etc including cost & conveyance of all materials, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge. 40mm Nominal Bore
62 BOQ As directed by Engineer-in-Charge 6.00 Each 218.00 1308.00
S & F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type as approved by engineer including cost & conveyance of all materials, labour charges,etc complete for finished item of work in all floors. 15mm nominal bore
63 BOQ As directed by Engineer-in-Charge 6.00 Each 316.00 1896.00
S & F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type as approved by engineer including cost & conveyance of all materials, labour charges,etc complete for finished item of work in all floors. 20mm nominal bore
64 BOQ As directed by Engineer-in-Charge 6.00 Each 444.00 2664.00
S & F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type as approved by engineer including cost & conveyance of all materials, labour charges,etc complete for finished item of work in all floors. 25mm nominal bore
65 BOQ As directed by Engineer-in-Charge 4.00 Each 1085.00 4340.00
S & F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type as approved by engineer including cost & conveyance of all materials, labour charges,etc complete for finished item of work in all floors. 40mm nominal bore
66 BOQ 1326.0 3.00 Each 716.00 2148.00
Constructing 150.00 mm X 100 mm SWG gully traps conforming to ISI 651 & 4127 with CI Grating & costructing in CM 1:6 pro over a CC (1:5:10) prop. Bed 100mm thick and plastering 12mm thick in CM (1:4) prop. both inside and outside surfaces and fitted with 304.80mm * 288.60mm (12" * 9") C.I. frame and hinged cover of standard make as directed by Engineer-in-charge Including cost and conveyance to site, labour charges, etc. complete for finished item of work (APSS No 1326)
67 BOQ 1302, 1319 & 1326 100.00 One Running Met 296.00 29600.00
Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc with solvent jointing as per standard practice including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) 75 mm dia
68 BOQ 1302, 1319 & 1326 100.00 One Running Met 441.00 44100.00
Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc with solvent jointing as per standard practice including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) 110 mm dia
69 BOQ As directed by Engineer-in-Charge 10.00 Each 8493.00 84930.00
Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3\-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,cost of excluding seigniorage on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification. 3\-0" Depth
70 BOQ As directed by Engineer-in-Charge 70.00 One Running Met 529.00 37030.00
Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1.5:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 914.4 mm (3\0") depth and refilling watering and tamping etc including cost & conveyance of all materials to site, all operational, incidental, labour charges overheads and contractor\s profit complete for finished item of work
71 BOQ As directed by Engineer-in-Charge 5000.00 One litre 8.00 40000.00
Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks, including overheads and contractor\s profit complete for finished item of work.
72 BOQ As directed by Engineer-in-Charge 2.00 Each 489.00 978.00
S&F of 25mm nominal size copper body float valve with PVC ball Indian make ISI mark including cost and conveyance of all materials at site, labour charges, overheads & contractors profit complete for finished item of work.
73 BOQ As directed by Engineer-in-Charge 900.00 One Metre. 90.00 81000.00
Supply and Laying of ISI 25mm outer dia heavy grade(2.10mm thickness) IS:9537 part 3 regid PVC pipe concealed in Roof Slabs with all required Metallic Deep Boxes including labour charges etc., complete. Makes : Sudhakar / Finolex / Modi / AKG / VIP / Precision
74 BOQ As directed by Engineer-in-Charge 380.00 One Metre. 76.00 28880.00
Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 regid PVC pipe consealed in wall with Metallic junction boxes and all required accessories including masonary work for light, fan and separate plug point with including all labour charges etc., complete. Makes : Sudhakar / Finolex / Modi / AKG / VIP / Precision
75 BOQ As directed by Engineer-in-Charge 250.00 One Metre. 76.00 19000.00
Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 regid PVC pipe consealed in wall with all required Metallic Junction Boxes including masonary work and labour charges etc., complete for Run of mains. Makes : Sudhakar / Finolex / Modi / AKG / VIP / Precision
76 BOQ As directed by Engineer-in-Charge 106.00 One Point 719.00 76214.00
Wiring with run of 2 of 1.5 Sqmm FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring,ferrules including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B . Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI(HFFR)/Polycb (HR-FR-LF) Accessories Makes : Legrand Myrius /Million mway/Gold Medal Curve / Anchor Roma viola / Havells Fabio/Panasonic vision
77 BOQ As directed by Engineer-in-Charge 2.00 One Point 1078.00 2156.00
Wiring with run of 2 of 1.5 Sqmm FRLS/HFFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 10A ISI Mark 2way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring,ferrules including cost and conveyance of all material and all labour charges etc., complete for Stair case points in N.R.B . Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI(HFFR)/Polycb (HR-FR-LF) Accessories Makes : Legrand Myrius /Million mway/Gold Medal Curve / Anchor Roma viola / Havells Fabio/Panasonic vision
78 BOQ As directed by Engineer-in-Charge 33.00 One Point 868.00 28644.00
Wiring with run of 3 of 1.5 Sqmm FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 10A ISI Mark 1way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring,ferrules including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust fan points in N.R.B. Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI(HFFR)/Polycb (HR-FR-LF) Accessories Makes : Legrand Myrius /Million mway/Gold Medal Curve / Anchor Roma viola / Havells Fabio/Panasonic vision
79 BOQ As directed by Engineer-in-Charge 25.00 Each 452.00 11300.00
Supply and fixing of 10A ISI Mark 3/2 pin Modular socket with 6A/10A 1way Modular switch on a Common switch board including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. Accessories Makes : Legrand Myrius /Million mway/Gold Medal Curve / Anchor Roma viola / Havells Fabio/Panasonic vision
80 BOQ As directed by Engineer-in-Charge 4.00 Each 639.00 2556.00
Supply and fixing of ISI mark 16A 3pin / 6A 3 Pin 1 way Modular combi socket with shutter, 16 Amps Modular switch, 3 Modular box with suitable cover frame and earth connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B.. Accessories Makes : Legrand Myrius /Million mway/Gold Medal Curve / Anchor Roma viola / Havells Fabio/Panasonic vision
81 BOQ As directed by Engineer-in-Charge 7.00 Each 1190.00 8330.00
Supply and fixing of 3 Nos 10A ISI mark Modular type switch with 3Nos 6A 3/2 pin wall plug socket with shutter on suitable size Modular deep box with cover frame including cost and coveyance of all material ferules and all labour charges etc., complete for Computers in N.R.B. / R.B. Accessories Makes : Legrand Myrius /Million mway/Gold Medal Curve / Anchor Roma viola / Havells Fabio/Panasonic vision
82 BOQ As directed by Engineer-in-Charge 600.00 One Metre. 110.00 66000.00
Supply and Run of 3 of 2.50 Sq.mm FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains, ferrules inlcuding all labour charges etc., complete. Makes : Legrand Myrius /Million mway/Gold Medal Curve / Anchor Roma viola / Havells Fabio/Panasonic vision
83 BOQ As directed by Engineer-in-Charge 120.00 One Metre. 167.00 20040.00
Supply and Run of 3 of 4.00 Sq.mm FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains,ferrules inlcuding all labour charges etc., complete. Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI(HFFR)/Polycab (HR_FR-LF)
84 BOQ As directed by Engineer-in-Charge 40.00 One Metre. 237.00 9480.00
Supply and Run of 3 of 6.0 Sq.mm FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains,ferrules inlcuding all labour charges etc., complete. for lighting TPN DBs and computer TPN DBs Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI(HFFR)/Polycab (HR_FR-LF)
85 BOQ As directed by Engineer-in-Charge 30.00 One Metre. 406.00 12180.00
Supply and Run of 5 of 6.0 Sq.mm FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains,ferrules inlcuding all labour charges etc., complete. for lighting TPN DBs and computer TPN DBs Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI(HFFR)/Polycab (HR_FR-LF)
86 BOQ As directed by Engineer-in-Charge 30.00 One Metre. 590.00 17700.00
Supply and Run of 5 of 10.0 Sq.mm FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains,ferrules inlcuding all labour charges etc., complete. for lighting TPN DBs and computer TPN DBs Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI(HFFR)/Polycab (HR_FR-LF)
87 BOQ As directed by Engineer-in-Charge 8.00 Each 1076.00 8608.00
Supply, transportation and fixing of 22W, +/ 10%, >/ 2300 lumens. 1200mm length LED light housing made with aluminium anodises body, wide operating voltage with PF=0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI=80etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE: Phillips, OSRAM/GE Venture/Wipro/Crompton/Bajaj/Havells/Jaquar/IB LED/Panasonic/Halonix/HPL/Syska/Eveready/Surya/Keselec/FIEM. LED MAKE: PHILIPS LUMILEDS/CREE/NICHIA/OSRAM/SAMSUNG/LG LEDs.
88 BOQ As directed by Engineer-in-Charge 4.00 Each 3525.00 14100.00
Supply, transportation and fixing of energy efficient fan, 1400mm sweep, aluminium body, consuming 32W, BEE 5 star rated, ceiling fan with Brush LEss Direct Current (BLDC) motor, class of insulation: B, 3 no\s blades, 30cm long down road, 2 no\s canopies, shackle kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 7.85, Air delivery minimum 270CMM, 275 RPM (tolerance as per IS: 374-2019), THD less than 10%, with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degrees C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete Makes: Atomberg (Efficio)/Havells/Orient but without regulator including all standard accessories with twin core flat copper wire of Finolex/RR kabel/Havells, connections and all labour charges etc., complete.
89 BOQ As directed by Engineer-in-Charge 29.00 Each 497.00 14413.00
Supply and fixing of Modular type Stepped electronic regulator for sweep AC ceiling fans of 1200mm including internal connections and all labour charges etc. Accessories Makes : Legrand Myrius /Million mway/Gold Medal Curve / Anchor Roma viola / Havells Fabio/Panasonic vision
90 BOQ As directed by Engineer-in-Charge 80.00 One Metres. 34.00 2720.00
Supply and Run of LAN Cable cat - 6 UTP cable.in existing pipe inlcuding all labour charges etc., complete. Makes: D Link / AMP / Molex / Legrand / Krone
91 BOQ As directed by Engineer-in-Charge 4.00 Each 528.00 2112.00
Supply and fixing of Cat 6 RJ-45 information outlets including duel face plate and all labour charges etc., complete Makes: D Link / AMP / Molex / Legrand / Krone.
92 BOQ As directed by Engineer-in-Charge 30.00 One Metres. 22.00 660.00
Supply and run of 2 Pair, 0.5mm telephone copper wire in existing pipe inlcuding all labour charges etc., complete. Makes: Gold Medal / Million / Finolex / Surabi / Polycab.
93 BOQ As directed by Engineer-in-Charge 2.00 Each 255.00 510.00
Supply and fixing of Modular telephone Jack with connector on modular box with cover frame in existing surface / consealed pipe wiring including cost and coveyance of all material and all labour charges etc., complete in N.R.B. / R.B. Makes : Legrand Myrius /Million mway/Gold Medal Curve / Anchor Roma viola / Havells Fabio/Panasonic vision
94 BOQ As directed by Engineer-in-Charge 1.00 Each 4682.00 4682.00
Supply and fixing of 8 Way SPN DB Horizontal with IP 43 Protection as per IS:13032 with 1 No 40A DP Isolator and 6 Nos 6-32 A 10kA ISI Marked C/D curveSP MCBs including alll connections and labour charges for Flush Mounting etc., complete. (SD 4, 4.4 a) TPN DB Makes: Legrand / Schneider/ Isolator Makes: Legrand-DX3/ Schneider-Acti9 SP, MCBs Makes: Legrand-DX3/ Schneider-Acti9
95 BOQ As directed by Engineer-in-Charge 1.00 Each 9669.00 9669.00
Supply and fixing of 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 with 1 No 63A FP ISolatorand 12 Nos 6-32A 10KA SP MCB, C/D Curve ISI Mark.SP MCBs including alll connections and labour charges for Flush Mounting etc., complete. (SD 4.4.4 a) TPN DB Makes: Legrand / Schneider/ Isolator Makes: Legrand-DX3/ Schneider-Acti9 SP, MCBs Makes: Legrand-DX3/ Schneider-Acti9
96 BOQ As directed by Engineer-in-Charge 1.00 Each 35550.00 35550.00
Supply and fixing of 8 Way VTPN DB Horizontal with IP 43 Protection as per IS:13032 with 1 No 125A FP MCCB and 1 No. 63A TP MCB 21 Nos 6-32 A 10kA ISI Marked C/D curveSP MCBs including all connections and labour charges for Flush Mounting etc., complete. (SD 4.4.4 a) TPN DB Makes: Legrand / Schneider/ Isolator Makes: Legrand-DX3/ Schneider-Acti9 SP, MCBs Makes: Legrand-DX3/ Schneider-Acti9 MCCB Makes: Schneider-NS NSX/Legrand-DP X3/
97 BOQ As directed by Engineer-in-Charge 2.00 Each 4770.00 9540.00
Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Important equipment with 2.5Mtr length 40mm dia \B\ class G.I pipe and providing brick masonary chamber of size 18" X18" with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length to be bolted with nut bolts including supply and termination of No.8 G.I.wire from bottm of the pipe with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) (17-18 SD 5.1.2)
98 BOQ As directed by Engineer-in-Charge 20.00 Each 137.00 2740.00
Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories including connections and labour charges etc., complete. (1.18Kgs/1Mtr) (17-18 SD 5.2.5)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail