Greater Hyderabad Municipal Corporation-GHMC has published Cycle Track Marking With Thermoplastic Paint From Nanal Nagar Junction To Tharamathi Baradhari Under Circle-13, Kz, Ghmc. Submission Date for this Tender is 29-01-2021. Cycle Track Tenders in HYDERABAD Telangana. Bidders can get complete Tender details and download the document.
| S.No | Subwork Name | Specification Number | Quantity | UOM | Rate(INR) | Amount(INR) |
|---|---|---|---|---|---|---|
| 1 | Cycle track marking | NA | 1240.00 | 1 Sqm | 702.00 | 870480.00 |
| Supplying of hot applied thermoplastic road marking compound,2.5 mm thick including reflectorising glass beads @250 gms with reflectorising glass beads on Bituminopus surface at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass bead as per MORTH Specifications 803.4 and IRC: 35-2015, the material should satisfy the requirements as per MORTH Specifications 803.4 and must comply with the following a) White index for the product should be inthe range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index inthe department lab .In case the department approves the white index of any vendor,the department engineer may carryout random checking of the applied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and willcompell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days ( as per the rules of the department) b) luminance factor of the material should be in the range of 80-85% at the at the 45 degree centigrade as per AASTHOM249 c) Crack resistance the applied panel cured for 7 days under ambient condition and then should be tested as per BS3262 ,Part-1,1989 and should pass at the range of \0\ degree centigrade to \-10\degree centigrade d) A dhesion :Strong E) Softening point : 102 degree centigrade F)Dried film finish : Smooth and uniform G) Night Vision : High as directed by the Engineer -In -Charge and confirming to IS: 164-1961 (1 st revision reaffirmed in 1986) and clause confirming to IRC 35-2015 and MORTH section 803.4 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
