}

Supply And Installation Of Cctv Surveillance Systemand Display Panel At Various Places In Taliparamba Legislative Assembly Constituency In Kannur District . Supply And Installation Of Cctv Surveillance Systemand Display Panel At Various Places In Tali, Kannur-Kerala

Public Works Department-PWD has published Supply And Installation Of Cctv Surveillance Systemand Display Panel At Various Places In Taliparamba Legislative Assembly Constituency In Kannur District . Supply And Installation Of Cctv Surveillance Systemand Display Panel At Various Places In Tali. Submission Date for this Tender is 28-01-2021. CCTV System Tenders in Kannur Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

26676958
Supply And Installation Of Cctv Surveillance Systemand Display Panel At Various Places In Taliparamba Legislative Assembly Constituency In Kannur District . Supply And Installation Of Cctv Surveillance Systemand Display Panel At Various Places In Tali
Open Tender
Indian
Kerala
Kannur
28-01-2021

Tender Details

Supply And Installation Of Cctv Surveillance Systemand Display Panel At Various Places In Taliparamba Legislative Assembly Constituency In Kannur District . Supply And Installation Of Cctv Surveillance Systemand Display Panel At Various Places In Taliparamba Legislative Assembly Constituency In Kannur District . ( I St Phase ) Under Mla Sdf 2019-20 ( Pariyaram , Chapparappadavu , Kurumathur

Key Value

Document Fees
INR 2750 /-
EMD
INR 50000.0 /-
Tender Value
Refer document

BOQ Items

Name of WorkTHIRD EYE - SUPPLY AND INSTALLATION OF CCTV SURVEILLANCE SYSTEMAND DISPLAY PANEL AT VARIOUS PLACES IN TALIPARAMBA LEGISLATIVE ASSEMBLY CONSTITUENCY IN KANNUR DISTRICT. (I st PHASE ) UNDER MLA SDF 2019-20 (PARIYARAM, CHAPPARAPPADAVU, KURUMATHUR PANCHAYATHS AND TALIPARAMBA MUNICIPALITY)
Sl. No. Item Description Item Code / Make Quantity Units
1 1 PART A
2 1.01 Fabrication, erection and commissioning of three legged Narrow Base Tower with square base of 1.0 m2 & square top of 0.35 m2 sides. The tower shall be Three legged and able to support microwave Dish antennae and should be tapered throughout with base width and top width as specified. Height of the tower : 10 mtrs, Bottom base foundation :0.6mtrs X 0.6mtrs X 0.6mtrs, Top side- 0.3048mtrX 0.3048mtrX 0.3048mtr with GI B class pipe, Foundation of the tower concreting : 1.0mtr qr , The type of Foundation of the tower has been designed as per IS standard & safe bearing capacity as 75 KN/m2 (min) should be taken care of when it is subjected soil/concrete test.The erection of tower foundation with concrete proportion of 1:3:6 & M20 concrete shall be used for reinforcement, Control of concrete shall be as per IS 456 : 2000, If needed Non-galvanizing steel structures such as Anchor Nuts,bolts etc. should be painted with red oxide coating. Tower shall be operational and able to withstand the wind velocity corresponding to wind zone 47 m/s as per standard , Note: Concrete and deformed steel bars for foundation are in the scope of tower manufacture or supplier. 10 Each
3 1.02 Erection and commissioning of GI Tubular Pole with bracket having Standard cable duct , Height- 6 mtr(1mtr below the ground), Equipment Surface Area: 0.25m2 and should be able to withstand equipment weight at top of about 25kg. 10 Each
4 1.03 Supply, conveyance and installation of 100 Watt Solar panels, Output Power : 100 Watts, Panel Technology : Poly Crystalline, Cell Conversion efficiency : >16% , Compliance to IEC standards, Space Requirement of cell : Standard, Short Circuit Current : Isc (A) 5.92, Number of Cells: 36 or above and should be able to drive 100Ah battery,) 40 Each
5 1.04 Supply, conveyance and installation of Solar panels frame suitable for 100 Wattt panel and that can be mounted on a various towers with wind Survivability of atleast 200 km/h . MS painted angles may be used for fabrication 40 Each
6 1.05 Supply, conveyance and installation of Low internal resistance lithium iron battery , Capacity : 100 AH, Nominal Voltage: 12.8V-Storage Temperature: -13~149°F/ -25~65°C, Connection Method: Parallel-Cycle Life: =4000 Cycles @ 80% DoD, Dimensions: Approximately 11 inch x 7 inch x 7 inch, Weight: About 12 kg, Certifications: UN38.3, MSDS, UL1642 (Lithium Cell) 20 Each
7 1.06 Supply, conveyance and installation of Weather-proof Boxes (racks suitable to place battery & MTTP accessories), Painted MS angle iron rack with Standard Zinc galvanized sheet should be used to make the specified rack with accessories such as DC Distribution box, cooling fan and hardware mounting kit. 27 Each
8 1.07 Supply and installation of 2 port POE Power Injector (12V-12w, 24v-12w, 24V-24w,12V-24w), Power Supply 24V, 0.5A, Gigabit PoE Max. Power Consumption : 5.5W, Power Method : Passive PoE, Supported Voltage Range 12-24VDC suitable for connecting IP cameras 27 Each
9 1.08 Supply and installation of Main DC Power supply (output-5V, 12V, 24V/ 10amp) (input-10V to 18V) 27 Each
10 1.09 Supply and installation of suitable Power cord/ adapter for connecting cameras to the power supply 54 Each
11 1.1 Supply and installation of Solar charger /Power Adapter, 12V/24V, Auto PWM, 10A Solar Charge Controller .Preferred make : Exide or Equivalent . 20 Each
12 1.11 Supply, conveyance and installation of Lightning arrestor, insulators, GI strip, and star earthing etc, Housing Type- Porcelain, Arrester Length- 3 mtr , Arrester Diameter- 50mm, Class A, Arrester Type- Intermediate Type, Sturdy design, Anti-corrosive for earthing of the tower, 50x3 mm GI strips should be bonded to the all four tower legs at the termination of the base leg of first joint and connected to ring earth at the other end ( The maximum value of earth resistance shall be minimum fraction of ohm.) 10 Each
13 1.12 Supply and providing ISI plate earthing as per IS 3043 with 600 X 600 X 6.3 mm CI/GI earth plate with required length of 20 mm dia ‘B’ class GI watering pipe, providing GI funnel with weld wash, filling charcoal around the earth plate up to a distance of 15 cm, filling the rest of the portion with excavated soil, including watering and ramming, providing brick work (20 mm) necessary at the top in 1:6 cement mortar, providing cast iron gully trap with GI covering at the top. 20 Each
14 1.13 Supply, conveyance and installation of Exhauster fan fitted to the weather proof box. Material: Plastic, Blade Material: PP (Poly Propylene), Noise level : Minimal operational sound ,Power rating : less than or equal to 35 W, Speed (RPM): 1350,Operating Voltage: 12 V DC, Sweep size : 200mm\n \n\n 20 Each
15 1.14 Supply and laying of CAT 6 Cable for interconnecting various equipments including camera and NVR. 470 Mtr
16 1.15 Supply and fixing the following sizes of PVC conduit 20 mm ,conforming to IS 9537 / 1983 along with all required accessories 300 Mtr
17 1.16 Supply and fixing the following sizes of light gauge, ivory coloured PVC of 20 mm dia light gauge ivory coloured ,conforming to IS 9537 / 1983 part III along with all required accessories 180 /Mtr
18 1.17 Supply, Installation, Testing and Commissioning of Power beam Antenna, Model : Mm5 400 , Dimensions 325 x 325 x 256 mm (12.8 x 12.8 x 10.1", Operating Frequency 5150 - 5875 MHz, Support Software OS: Ubiquiti firmware technology, Protocol Support : Outdoor multi -point networking ,Features : Ubiquiti Channelization , Spectral Width Adjustment , ACK Auto-Timing , AAP Technology , Multi-Language Support, Throughput 150+ Mbps, Network Interface 10/100/1000, Frequency Band: > 5 GHz ,Antenna Gain > 18 dBi, Power Supply 24V- 0.5A ,Gigabit PoE Max. Power Consumption: 8.5W ,Operating Frequency : U-NII-3 5150 - 5875 MHz ,) Wind Survivability: 200 km/h ,Wireless Approvals: FCC, IC, CE RoHS Compliance ,Vibration Test: IEC 68-2-6, Temperature Shock Test : IEC 68-2-14 UV Test. Preferred make : Ubiquiti 20 Each
19 1.18 Testing and synchronization of existing Open WRT and Customized software for control of Star topology (TXD/RXD bus signal), track the network status, Control the tampering intrrupt and monitoring channels etc , Enable tower securities and Power analysis by using Tele Camera & Proxy sensors, with help of user interface firmware/DIP package . 20 Each
20 1.19 Supply, Installation, Testing and Commissioning of HD WDR Net work IR Bullet Cameras having following minimum specifications : 1/2” image sensor ,Lens 2.8"12mm, 4 Megapixel progressive Scan CMOS, H.264+ & H.265 ,25fps@4MP, Day/Night(ICR), Multiple network monitoring: Web viewer, CMS(PVMS), Recommended Make : UNV or equivalent . 52 Each
21 1.2 Supply, Installation, Testing and Commissioning of IP Net work Video Recorder & Drive Software with all accessery unit. Features-16channel, Video compression H.264/265 , Up to 10TB HDD Supporting , Max input/record 200mbps , HDMI and VGA Port facilities, Recording Resolution 8MP, Certifications : FCC, CE. Recommended :UNV/Hikvision 4 Each
22 1.21 Supply, installation, testing and commissioning of 4TB SATA Surveillance HDD 7200 rpm for recording and backing up the camera output to the NVR, which is placed anywhere in the network, 6Gb/s . Recommended: Seagte 4 Each
23 1.22 Supply and Installation of temperature management solution, must work on Internet protocol and should be a Non-contact Temperature Measurement System. The system must provide accurate and automated temperature measurement, automatic recording of abnormal temperature data, simultaneous body temperature detection of multiple people. The system must take 16 people temperature measurement within 30ms, should be able to measure a min 16 people simultaneously in real-time, \n1. Body Temperature detection camera- 1/1.9" 2MP PS CMOS Image Sensor - Visible, Effective thermal image of Pixel of 400x300 (25/30fps)and of 1920x1080 normal, onboard detection. Have a thermal Sensitivity of >=40mK, Body detection of upto 30, Thermal 8mm Fixed Lense and Visible-2.7-12mm Motorised. Lense accuracy <0.3degree C. response time 30ms.WDR 120DB, should support voice linkage and real-time alarm, s.\n2. Thermal Network VR - Up to 32 IP Channel , of Max 320 Mbps B/w, must process 16- 20 face Pictures / sec, should support 16 face Databases with a 10000 face images. HDMI and VGA output, support RAID 5/6/10, Support SATA hdd, should support search by image or image properties. should be able to raise on events like buzzer, alarm prompt, email etc Other functions like perimeter, virtual fences should be supported , should support external portable thermal sensors, like blackbody 1 Each
24 1.23 Additional requirements like 32" smart TV, Cabling, HDD, Ceiling Mount / wall Mount etc has to be factored 2 Each
25 1.24 Network integration charges for establishing fibre connectivity using 4 PORT Manageable GPON Optical Network Unit 19 Each
26 1.25 Supply, Installation ( wall mount ), Testing and Commissioning of 75” Monitor with comercial Full UHD , 3840 x 2160, Panel resolution optimized for CCTV applications and designed for 24/7 use,60Hz Slim D-LED BLU panel technology , excellent picture quality, Aspect Ratio 16:9 Landscape / Portrait, video output via HDMI, Contrast ratio : 1200:1, VGA and composite,security monitor. professional LED Display including all Accessories (Recommended: Samsung/Sony/LG )\n\n 3 Each
27 1.26 Supply and installation of 4 port Gigabit Network switch with adapter , 8 Gbps forwarding capacity , 8K MAC Address Table, store and forward transmission method, 10 BASE T/100BASE T/1000BASE- T interface options , rack mountable, conforming to FCC class. Recommended: Cisco/Netgear. 10 Nos
28 1.27 Network configuration charges for creating VLANS, assigning IP to various components, providing authorisations and other network management activities 1 Each
29 1.28 Supply, Installation, Testing and Commissioning of HD WDR Net work IR Dome Cameras having following minimum specifications : 1/2” image sensor , 4 Megapixel progressive Scan CMOS , H.264+,25/30fps, , Day/Night(ICR), Multiple network monitoring: Web viewer, CMS(PVMS).UNV or equivalent 2 Nos
30 1.29 Leasing charge for Fiber Line (for three years) 19 Each
31 1.3 Supply and fixing 4U Rack for switches and other equuipments with PDU, cooling fan and hardware mounting kit. Recommended: VAL Rack or equivalent.\n 2 Each
32 1.31 L.S provision for miscellaneous connecting accessories(BNC, DC & RMC Pin Connectors/ RJ45 connectors and crimping - BESTNET, Anchor bolts& Nuts, Paint to spray tower leggs,Single module PVC/ wooden box with plate for placing camera , screws & Fischer’s, Cable tie & insulation tapes ,Flexible pipe, Power cable, power sockets, Power switches, Rack bolts of weather proof boxes etc. as per the requirements. Installation and maintanace( for three years) and all other charges. 1 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail