Rajasthan State Road Development And Construction Corporation Limited has published Construction Of Pharmacy Building At University Of Kota , Kota ( Excluding Cost Of Cement ) . Submission Date for this Tender is 09-02-2021. Building Work Tenders in UNIVERSITY OF KOTA, KOTA Rajasthan. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 25-Jan-2021 | office order for bid security | Fee | 09-02-2021 |
2 | 02-Feb-2021 | 03 no. drawings | Other | 09-02-2021 |
3 | 05-Feb-2021 | corrigendum dated 05-02-2021 | Other | 09-02-2021 |
Name of Work: Construction of Pharmacy Building at University of Kota, Kota (Excluding cost of cement) | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 Mtr.All kinds of soil | 873 | cum | |
2 | 2 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : :Ordinary rock | 1106.38 | cum | |
3 | 3 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 Mtr. including of taking out the excavated soil and depositing and refilling of jhiri, with watering and ramming and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material available :Hard rock ( blasting prohibited) useful material 30%. | 1038 | cum | |
4 | 4 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. | 873 | cum | |
5 | 5 | Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion) | 4616 | sqm | |
6 | 6 | Supplying chemical emulsion in sealed containers including delivery as specified.\nChlorpyriphos/Lindane emulsifiable concentrate of 20% | 3078 | ltr | |
7 | 7 | Filling in plinth with locally available good earth under floors including watering ramming consolidating and dressing complete including cost of Locally available good earth including all lead. | 8434 | cum | |
8 | 8 | Providing crusher sand in plinth including loading & unloading transportion etc. complete.(All lead & Lift) | 3103 | cum | |
9 | 9 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | 447 | cum | |
10 | 10 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).\n\n | 800 | cum | |
11 | 11 | Centering & Shuttering with plywood or steel sheets including strutting, propping, bracing bothways and removal of formwork for foundations in basements rafts, footings, strap beams bases of columns, etc. upto plinth level. | 4519 | sqm | |
12 | 12 | Centering & shuttering with plywood or steel Plate including strutting, propping bracing both ways with steel props and removal of formwork for upto floor Three level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. | 22260 | sqm | |
13 | 13 | Centering & shuttering with plywood or steel Plate including strutting, propping bracing both ways with steel props and removal of formwork for upto floor Three level for :Columns, pillars, posts and struts etc. | 8932.59 | sqm | |
14 | 14 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor Three level. Thermo-mechanically Treated bars (Conforming of relevent IS code) | 669521 | kg | |
15 | 15 | Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering and reinforcement including curing, compaction, finishing with rendering in cement sand mortar 1 : 3 (1 cement : 3 coarse sand) and making good the joints and Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-25 grade reinforced cement concrete. All wiork up to plinth level. | 2018 | cum | |
16 | 16 | Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering and reinforcement including curing, compaction finishing with rendering in cement sand mortar 1 : 3 (1 cement : 3 coarse sand) and making good the joints and admixtures in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of engineer-in-charge. M-25 grade reinforced cement concrete. All work from plinth level up to floor Three Level.Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. | 1020 | cum | |
17 | 17 | Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering and reinforcement including curing, compaction finishing with rendering in cement sand mortar 1 : 3 (1 cement : 3 coarse sand) and making good the joints and admixtures in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of engineer-in-charge. M-25 grade reinforced cement concrete. All work from plinth level up to floor Three LevelBeams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.. | 3339 | cum | |
18 | 18 | Providing and fixing precast cement concrete coping 1 : 2 : 4 mix 50 mm thick complete as per specification : | 270 | sqm | |
19 | 19 | Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:2:4 lme concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. | 37 | sqm | |
20 | 20 | Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 cm thick wall in : Cement Mortar 1:6 ( 1-Cement : 6-Sand). | 1860 | cum | |
21 | 21 | Flyash Lime Gypsum Brick Works with Flyash Lime Gypsum Brick Works of class designation 75 in superstructure above plinth level upto floor Three Level in all shapes and sizes in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) | 3952 | cum | |
22 | 22 | Half Flyash Lime Gypsum Brick Works in Superstructure , above plinth level upto floor Three level using Flyash Bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) | 747 | sqm | |
23 | 23 | Random rubble dry stone Kharanja under floor. | 923 | cum | |
24 | 24 | Plaster on new surface on walls in cement sand mortar 1 : 4 including racking of joints etc. complete fine finish : 20 mm thick | 12911 | sqm | |
25 | 25 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20 mm thick | 18959 | sqm | |
26 | 26 | 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) | 14502 | sqm | |
27 | 27 | Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design | 1762 | Rm | |
28 | 28 | Making grooves as per design in plaster 10mm to 20mm wide. | 25000 | Rm | |
29 | 29 | Providing and fixing 15 to 20 mm thick Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12 mm (Av.) thick base of cement mortar 1 : 3 (1 cement : 3 coarse sand) jointing with white cement mortar 1 : 2 (1 white cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of : Jhunjhunu / Jalore (Red / Choclate Colour)Above 3601 Cm2 Slabs | 6230 | sqm | |
30 | 30 | Marble stone flooring table rubbed, \n18-20 mm thick over 20 mm (Av.) thick base of CM 1 : 4 (1 cement : 4 coarse sand) jointing with white cement mortar 1 : 2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.White Marble Makrana 'Adanga'Above 3601 Cm2 Slabs | 153 | sqm | |
31 | 31 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600 mmAdd extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mm thickness instead of cement mortar. | 7046 | sqm | |
32 | 32 | Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mm thickness instead of cement mortar. | 7046 | sqm | |
33 | 33 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). | 530 | sqm | |
34 | 34 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 300mm x 450mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). | 1099 | sqm | |
35 | 35 | Add extra over item No.29 for Marble printed, granite shade tiles. For Glaged Tiles | 1099 | sqm | |
36 | 36 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).For fixed portion Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) | 6226 | kg | |
37 | 37 | For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) | 6226 | kg | |
38 | 38 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.)With glass panes of 5.0 mm thickness (weight not less than 13.75 kg./sqm) as per IS : 2835. | 981 | sqm | |
39 | 39 | Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Prelaminated particle board with decorative lamination on both sides. | 127.76 | sqm | |
40 | 40 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate | 36 | Nos | |
41 | 41 | Filling the gap upto 5 mm depth and 5 mm width in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. | 1696 | Rm | |
42 | 42 | Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 75mmx72mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge.Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) | 834 | sqm | |
43 | 43 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proffing cement compound @ 0.253 kg/sqm. b) laying second layer of Fiber glass cloth when the first layer is still green . Overlaps of joints of fiber cloth should not be less than 10 cm . c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proffing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around\nd) fourth and final layer of brick tiling ‘with cement mortar or any other approved protective coarse. (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured | 275 | sqm | |
44 | 44 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : | 672 | Rm | |
45 | 45 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. | 26018 | kg | |
46 | 46 | Add extra if square, rectangular hollow tubular sections are used. | 12279 | kg | |
47 | 47 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' :35 mm thick .Decorative teak veneer both side | 743 | sqm | |
48 | 48 | Add extra in Flush doors : For Double leaf | 166 | sqm | |
49 | 49 | Add extra for Sunmica 0.8 mm thick. | 1485 | sqm | |
50 | 50 | For External teak wood lipping on flush door (35mmx6mm) | 1691 | Rm | |
51 | 51 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete birla / J.K. / Nerolac or ISO. As per direction of Engineer in charge | 30813.8 | sqm | |
52 | 52 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including Prepration of base and all scaffolding : New work (two or more coats) over and including scrapping and priming coat with cement primer. | 30813.8 | sqm | |
53 | 53 | Painting with enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. | 820 | sqm | |
54 | 54 | Decorative plaster work with spectrum textured coating as per approved colour and shade complete as per manufactures specifications.Roller Finish. | 7747 | sqm | |
55 | 55 | Decorative plaster work with spectrum textured coating as per approved colour and shade complete as per manufactures specifications.Trowel Finish (1 to 1.5 mm thick). | 2583 | sqm | |
56 | 56 | Decorative plaster work with spectrum textured coating as per approved colour and shade complete as per manufactures specifications.PERKY-TEXTURED - (Brush Finish) av. Thickness 152 to 200 microns. | 2583 | sqm | |
57 | 57 | Supplying and fixing dressed sand or other approved stone shelves, tands in cement mortar 1 : 3 with fine dressed edges : 25 mm thick. | 235 | sqm | |
58 | 58 | Grading roof water proofing treatment with :Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 462 | cum | |
59 | 59 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | 250 | Nos | |
60 | 60 | Extra for providing edge moulding to 18 mm thick marble stone counters, vantities etc. over item No. 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work | 5007 | Rm | |
61 | 61 | Provding and fixing Stainless steel gate gratting and made of Stainless steel pipe with hold fast and fitting and complete as per design and driwing including cutting welding etc. The stainless steel shall be 304 grade and shall confirm to relevant I.S. Specifications. | 3345 | kg | |
62 | 62 | Providing, hoisting and fixing up to floor Three level precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia Mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1 : 3 (1 cement : 3 fine sand ) etc complete as per approved design excluding plastering of jambs, sills and soffits 50mm thick | 288.88 | sqm | |
63 | 63 | Supplying and providing of two components poly sulphide sealant containing solid contents, confirming to standard specification and approved compatible primer, for priming vertical faces prior to application of poly sulphide sealant including all LABOUR charges for sealing of expansion joints after drill mixing of two components sealing compound. Cleaning and preparation of expansion joint using wire brush sand papering with emery paper and filing with suitable mechanical means. The work includes racking and cleaning of joints, sticking, debonding tape on bottom of joint, applying primer on edges, using masking tape on edges, providing of sealant and removal of masking tape immediately after providing sealant in joint. To vertical joint between RCC columns, bricks & stone masonry in size 40 mm width and 12 mm depth, including providing back up MATERIAL (Thermocoal foam) if required. | 162 | Rm | |
64 | 64 | Providing and fixing in position collapsible steel shutters with vertical MS Channels 20 x 10 x 2 mm and bracket with flat iron diagonals 20 x 5 mm size with top and bottom rail of T-iron 40 x 40 x 6 mm with 40 mm dia steel pulleys / ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). With 75 mm opening when closed. | 96 | sqm | |
65 | 65 | Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work | 41 | Rm | |
66 | 66 | Ornamental cement plaster in cement sand mortar 1 : 4 making Kangooras etc. as per Jaipur Practice. | 490 | sqm | |
67 | 67 | Making gola below Kangooras in cement sand mortar 1 : 3 as per approved design. | 490 | sqm | |
68 | 68 | Add extra over item No. 12.1 to 12.12 for plaster work on exterior wall of height more than 4.5 m from plinth level of every additional height of 4.5 Mtr. or part thereof. | 2636 | sqm | |
69 | 69 | Add extra over item No. 12.1 to 12.12 for plaster work on exterior wall of height more than 4.5 m from plinth level of every additional height of 4.5 Mtr. or part thereof.(9.00 to 13.50 mtr) | 2048 | sqm | |
70 | 70 | Add extra for every additional 1 m ht. Or part there of beyond 4.5 mtr. of shuttering.Add extra for using steel props and bracings etc. instead of wooden members over item No. 4.11.1 to 4.11.11 above 10 m and up to 30 m. | 165 | sqm | |
71 | 71 | Cement concrete flooring grade 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete :75 mm thick with 20 mm thick nominal size aggregate. | 2128 | sqm | |
72 | 72 | Providing glass strips in joints of terrazo / cement concrete floor :40 mm wide and 5.5 mm thick. | 20168 | Rm | |
73 | 73 | Renewing glass panes and refixing existing wooden fillets :4mm thick plain glass panes. | 78 | sqm | |
74 | 74 | Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504.Category 'B' Denated Only two side like I,Z,T Shape etc. as per IRC SP 63:2004 | 2278 | sqm | |
75 | 75 | Providing and Fixing at all height all false ceiling of 12.5 mm thick tapered edge Gypsum board conforming to IS : 2095 including providing and fixing of frame work made of special section power pressed from M.S. sheet and galvanized in accordance with zinc coating 600 as per IS : 277 and consisting of angle cleats of thick 25 mm wide x 16 mm thick with flanges of 22 mm and 37 mm at 1200 mm center to center one flange fixed to the ceiling with dash fastner 12.5 mm dia x 40 mm long with 6 mm dia bolts to the hangers of 25 x 25 x 5 mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45 mm x 15 mm x 0.9 mm running at the rate of 1200 mm center to center to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flangesof 26 mm each having clips of 10.5 mm at 450 mm center to center shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm center to center with 25 mm long drive-all screws @ 230 mm inteval including jointing and fixing to a flush finish of tapered and square edge of gypsum board with recommended filler, paper tapes, finisher and two coats of primer suitable for gypsum board as per manufactures specifications and also including the cost of making openings for right fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specifications and direction of the Engineer-in-Charge but the excluding the cost of painting. of 26 mm each having clips of 10.5 mm at 450 mm center to center shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm center to center with 25 mm long drive-all screws @ 230 mm inteval including jointing and fixing to a flush finish of tapered and square edge of gypsum board with recommended filler, paper tapes, finisher and two coats of primer suitable for gypsum board as per manufactures specifications and also including the cost of making openings for right fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specifications and direction of the Engineer-in-Charge but the excluding the cost of painting. | 4760 | sqm | |
76 | 76 | Providing and fixing of suspended false ceiling in the grid of 600 x 600 mm / 600 x 600 to 900 x 900 mm using aluminium tees with inter lock system of main tee, cross tee and wall angle (size of tee and angle approx. 25 mm x 25 mm or equivalent) etc. complete with G.I. Adjustable suspenders skelton. Ceiling tiles made from multi chamber hollow PVC section having an overall cross section of : -Using 200 x 20 x 1 mm section. | 499 | sqm | |
77 | 77 | Providing and fixing expansion joint board for building RCC column beams, walls, slab of Polyethylene foam of density 30 to 35 Kg/m3 of Armour Board.40 mm Thick | 318 | sqm | |
78 | 78 | Providing & fixing Aluminium composit panel 5mm thick by using 0.5 mm thick aluminium foil and 5mm thick reflective glass (Sand bobin, ASHI India or equivalent), and framing of 2mm thick aluminium section of 50x50 mm size silicon & glazing tap etc. complete, upto IIIrd floor, Pattern as approved by Engineer in Charge. | 516 | sqm | |
79 | 79 | Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete :Serrated with central bulb (225 mm wide, 8-11 mm wide) | 150 | Rm | |
80 | 80 | 40mm thick marble chips flooring rubbed and polished to granolithic finish under layer 28mm thick cement concrete 1:2:4 (1 cement : 2 course sand : 4 graded stone aggregate 12.5mm nominal size) including fixing of dividing strip (excluding the cost of strips) and top layer 12mm thick with marble chips of approved colour 7mm to 10mm nominal size laid in cement marble chips mix by weight in proportion of 2 : 3 (2 cement : 3 marble chips) by volume including cement slurry etc. complete :Ordinary cement without any pigment. | 4616 | sqm | |
81 | 81 | Marble chips skirting/dado rubbed and polished to granolithic finish 6mm thick with white marble chips of approved colour and size from smallest to 4mm nominal size laid in cement marble chips mix in proportion of 4:7(4 cement : 7 marble chips) by volume including fixing of dividing strips (excluding the cost of strips) complete in all respects :18mm thick with under layer of 12mm thick cement plaster 1:3 (1 cement : 3 coarse sand) :Ordinary cement without any pigment.\n | 210 | sqm | |
82 | 82 | Making khurras 450 x 450mm with average minimum thickness 50mm cement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement, rounding edges and making and finishing the out let complete. | 200 | Nos | |
83 | 83 | Providing and Fixing superior quality like Hardvyn or equivalent hydraulic door closure. | 80 | Nos | |
84 | 84 | Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size.Welded mesh 25 mmx 25 mm x 2.1 mm | 356.4 | sqm | |
85 | 85 | P & F Indina type white glazed vitreous china 1st quality W.C. Orissa pan (IS: 2556 Mark) with 100mm vitreous china P or S trap including cutting and making good the wall and floor size 580x440mm | 18 | Each | |
86 | 86 | Providing & Fixing Premium Quality white glazed vitreous china Sanitary Wares (IS:2556 Mark) of approved make as per direction of Engineer-in-charge including cutting and making good the wall and floor.Wall Mounting European type W.C. | 60 | Each | |
87 | 87 | P & F Premiumquality water closet Seat Covers with brass hinges complete Solid PVC (ISI marked) grade-I White for EWC. | 60 | Each | |
88 | 88 | P & F Premium quality Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make as per Engineer-in-charge with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : | 18 | Each | |
89 | 89 | Providing & Fixing Concealed cistern with Floor mounting frame and flush plate of superior quality and approved sample by Engineer-in-charge. | 60 | Each | |
90 | 90 | Providing & Fixing premium qulaity WVC Wash basin with C.I. brackets duly painted & 32 mm C.P. brass waste coupling of approved make with PVC waste pipe completeSize 550 mm x 400 mm dia for counter top. | 66 | Each | |
91 | 91 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (large) or half stall size 610x400x80mm. | 36 | Each | |
92 | 92 | P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor :WVC Lab sink (IS:2556 mark) size 530 x 430 x 180 mm | 70 | Each | |
93 | 93 | P&F Looking Mirror 5mm thick of approved make with ornamental frame size 50x12 with 6mm Ply Board on Back Side Complete as per approved sample | 50 | Each | |
94 | 94 | P & F Toilet Shelf of approved quality/make: Hard Plastic of Commander/equivalent size \n590x140mm | 50 | Each | |
95 | 95 | P & F Tooth Paste & Brush Holder of approved quality/make:Stainless Steel | 18 | Each | |
96 | 96 | P & F Twin- peg of approved quality / make C.P. brass (heavy)Superior quality | 78 | Each | |
97 | 97 | P & F Bath Shower of approved quality/make.P & F Bath Shower of approved quality/make. | 18 | Each | |
98 | 98 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. | 60 | Each | |
99 | 99 | Providing & fixing C.P.flange for 15mm dia taps. | 240 | Each | |
100 | 100 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EIPillar Cock 15 mm nominal size | 48 | Each | |
101 | 101 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EISwan neck pillar cock 15 mm nominal size | 27 | Each | |
102 | 102 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EIBib Cock with long thread 15 mm nominal size | 30 | Each | |
103 | 103 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EILong body Bib Cock 15 mm nominal size | 18 | Each | |
104 | 104 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EITwo way Bib Cock 15 mm nominal size | 66 | Each | |
105 | 105 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Angular stop cock with long thread 15 mm nominal size | 240 | Each | |
106 | 106 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Stop cock long thread | 80 | Each | |
107 | 107 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Concealed stop cock 15 mm nominal size | 72 | Each | |
108 | 108 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Sink cock with swinging casted spout (table mounted ) 15 mm nominal size | 18 | Each | |
109 | 109 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI 600 mm long towel rail | 66 | Each | |
110 | 110 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Revolving type towel ring | 66 | Each | |
111 | 111 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Soap dish | 66 | Each | |
112 | 112 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EIShower arm | 18 | Each | |
113 | 113 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Paper holder | 66 | Each | |
114 | 114 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Hand shower with 8 mm dia 1 mt long PVC tube & wall hook complete | 48 | Each | |
115 | 115 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete Brass wt. Not less than 300 gm,15mm. | 72 | Each | |
116 | 116 | P & F 15 mm. Dia Connection Pipe of approved quality/make :PVC pipe with C.P. Brass nuts upto length, 300mm 600mm. | 240 | Each | |
117 | 117 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make Gun-metal 15mm nominal bore. | 60 | Each | |
118 | 118 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make Gun-metal 15mm nominal bore.25mm nominal bore. | 60 | Each | |
119 | 119 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity | 60 | Each | |
120 | 120 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litres capacity. | 30 | Each | |
121 | 121 | P & F Square-mouth gully trap `A` grade (IS 651-1992 :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type.Trap size 150 X 100mm, ferrow cement cover with frame, Internal Chamber size 300 X 300mm. | 20 | Each | |
122 | 122 | P & F Square-mouth gully trap `A` grade (IS 651-1992 :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type.Trap size 225 X 150 mm, ferrow cement cover with frame Internal Chamber size 450 X 450mm. | 20 | Each | |
123 | 123 | Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete :300mm dia Internal | 80 | Each | |
124 | 124 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M | 20 | Each | |
125 | 125 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. | 130 | Each | |
126 | 126 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Deduct for using brick work 230 mm thick in place of 300 mm thick stone masonry size 450 x 450mm depth upto 0.5 M Cement cover with frame | 160 | Each | |
127 | 127 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Deduct for using brick work 230 mm thick in place of 300 mm thick stone masonry size 600 x 450mm depth upto 0.5 M Cement cover with frame. | 36 | Each | |
128 | 128 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 400 x140x150 cm.(for 50 users) | 6 | Each | |
129 | 129 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.:Size 300 Cm. dia outside & 300 Cm. depth . | 6 | Each | |
130 | 130 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110 mm dia | 800 | mtr | |
131 | 131 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Coupler 110mm dia | 240 | Each | |
132 | 132 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /makeBend 87.5 Dg.110mm dia | 80 | Each | |
133 | 133 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Bend 45 Dg.110mm dia | 80 | Each | |
134 | 134 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Door Bend 87.5 Dg.110mm dia | 105 | Each | |
135 | 135 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make.Pipe Clip 110mm dia | 105 | Each | |
136 | 136 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make.Single Tee110mm dia. | 120 | Each | |
137 | 137 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make.Nahni Trap with Jali 4”110mm dia | 180 | Each | |
138 | 138 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make.Vent Cowel dia110mm dia | 20 | Each | |
139 | 139 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia | 800 | mtr | |
140 | 140 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.160 mm dia | 600 | mtr | |
141 | 141 | Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply, capable to withstand temperature upto 80 oC including all special f withittings of composite MATERIAL (engineering plastic blend and brass inserts whwnever required) e.g. elbows, tees, reducers, couplers connectors etc.with clamps at 1.00 metre spacing.This include the cost of cutting chases and including testing of joints complete as per direction of Engineer In charge \nConcealed installation including cutting chases and making good the walls etc. complete.2025 (25mm OD) pipe | 700 | Each | |
142 | 142 | Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply, capable to withstand temperature upto 80 oC including all special f withittings of composite MATERIAL (engineering plastic blend and brass inserts whwnever required) e.g. elbows, tees, reducers, couplers connectors etc.with clamps at 1.00 metre spacing.This include the cost of cutting chases and including testing of joints complete as per direction of Engineer In charge \nConcealed installation including cutting chases and making good the walls etc. complete.2532 (32mm OD) pipe | 600 | Each | |
143 | 143 | Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply, capable to withstand temperature upto 80 oC including all special f withittings of composite MATERIAL (engineering plastic blend and brass inserts whwnever required) e.g. elbows, tees, reducers, couplers connectors etc.with trenching & refilling and testing of joints complete as per direction of Engineer In charge \nExternal work1620 (20mm OD) pipe | 700 | Each | |
144 | 144 | Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply, capable to withstand temperature upto 80 oC including all special f withittings of composite MATERIAL (engineering plastic blend and brass inserts whwnever required) e.g. elbows, tees, reducers, couplers connectors etc.with trenching & refilling and testing of joints complete as per direction of Engineer In charge \nExternal work 2025 (25mm OD) pipe | 900 | Each | |
145 | 145 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) all around S.W. pipe including 15 Cm. thick bed concrete (Width W= Diameter of pipe in Cm+30 Cm.)( Excluding cost of pipe)100mm dia S.W. pipe | 250 | Each | |
146 | 146 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) all around S.W. pipe including 15 Cm. thick bed concrete (Width W= Diameter of pipe in Cm+30 Cm.)( Excluding cost of pipe)150mm dia S.W. pipe | 300 | Each | |
147 | 147 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Coupler (socket)110mm dia | 80 | Each | |
148 | 148 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Plain Tee110mm dia | 100 | Each | |
149 | 149 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Door Tee | 100 | Each | |
150 | 150 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Bend 45 | 70 | Each | |
151 | 151 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Bend 87 .5 | 125 | Each | |
152 | 152 | Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe:150mm dia Nominal bore. | 200 | mtr | |
153 | 153 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work.150 | 12 | mtr | |
154 | 154 | S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts complete for casing size:150mm dia | 1 | Each | |
155 | 155 | S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. | 1 | Each | |
156 | 156 | SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering of riser pipe, G.I./ H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect.100 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively.2.0 HP, 1-Ø, (45-89)Mtr, (100-33)LPM Group – 1 | 3 | mtr | |
157 | 157 | Providing & Fixing of HDPE pipe ISI mark (IS:4984/95) for water supply (suitable for submersible & jet pump) with required fittings 40 mm OD 6 kg / cm2 Group – 1 | 125 | mtr | |
158 | 158 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required.4.0 Sq.mm 3 core flat / Round. Group – 1 | 150 | mtr | |
159 | 159 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required.4.0 Sq.mm 3 core flat / Round. Group – 1 | 150 | mtr | |
160 | 160 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall)25 mm nominal outer dia pipes | 600 | mtr | |
161 | 161 | Clearing and grubbing road land including uprooting rank vegetation, grass, brush, shrubs, saplings and trees of girth upto 300mm, removal of stumps, disposal of unserviceable Material and stacking of serviceable Material upto 1000m from road boundary. (MoRTH Specification : Clause 201).BY MECHANICAL MEANSIn area of Light Jungle | 1 | Hact | |
162 | 162 | Construction of embankment with approved Material obtained from borrow-pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of Table 300-2 including cost of compensation for earth taken from private land with lead upto 1 km as per MoRTH Specification : Clause No. 305. | 9844.8 | Cum | |
163 | 163 | Construction of sub-grade and earthen shoulders with approved Material obtained from borrow-pits with all lifts and leads, transporting to site, spreading, grading to require slope and compacted by vibratory roller 8-10 tonne to meet requirement of Table 300-2 as per MoRTH specification : Clause No. 305. | 3060 | Cum | |
164 | 164 | Carriage of sand bajri, ballast, stone, boulders, kankar and gravelly Material including loading and unloading stacking etc. complete. [MoRTH specification : 514.5 Table 500.28]For all lead | 12904.8 | Cum | |
165 | 165 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : :Ordinary rock | 243 | Cum | |
166 | 166 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | 276.75 | Cum | |
167 | 167 | Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 cm thick wall in : Cement Mortar 1:6 ( 1-Cement : 6-Sand). | 918 | Cum | |
168 | 168 | Providing and laying Reinforced cement concrete pipes NP-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (MoRTH specification : clause 1000/2900).300 mm dia | 125 | rm | |
169 | 169 | Providing and laying Reinforced cement concrete pipes NP-4 for culverts including jointing ends and fixing collar with cement mortar 1:2. (MoRTH specification : clause 1000/2900).1000mm dia | 45 | rm | |
170 | 170 | Providing and laying Plain Cement Concrete M-15 Mix with stone aggregate 20mm nominal size mechanically mixed and vibrated, in superstructure upto 4 meter above 1.50 m level from ground/bed level. [MoRTH Specification : Clause 1000/1700] | 30 | Cum | |
171 | 171 | Provinding and laying of paver block as per IS 15658 : 2006 (Indian standerd for Precast concrete block for Paving -specification) and IRC :SP:63-2004(guidelines for the use of interlocking concrete blockPavement) (from BIS approved manufactrers M-35,60mm | 2370 | sqm | |
172 | 172 | Cast in Situ Cement Concrete M20 Kerb Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408\nUsing Concrete Mixer | 500 | mtr | |
173 | 173 | Painting Two Coats on New Concrete SurfacesPainting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces | 300 | sqm | |
174 | 174 | Providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the Material at OMC in mechanical mixer (Pug mill), carriage of mixed Material, laying in uniform layers with Motor Grader, F.E. Loader, on a prepared surface and compacting with Vibratory Compactor to achieve the desired density including all Material, labour, machinery, lighting barricading and maintenance of Driversion complete. (MoRTH specification clause 401). with all lead & lift | 553.5 | cum | |
175 | 175 | Providing, laying, spreading and compacting crushed graded stone aggregate as per Table 400-10 & 400.11 to Wet Mix Macadam specifications including premixing the Material with water to OMC in mechanical mixer (Pug mill) as per design mix, carriage of mixed Material by tipper to site laying in uniform layers, with motor grader/F.E. loader/Paver Finisher, in sub-base/base course on a well prepared under-base and compacting with Vibratory Roller to achieve the desired density including lighting, guarding, barricading and maintenance of Driversion etc. (MoRTH specification : Clause 406). with all lead & lift | 315 | cum | |
176 | 176 | Providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per IS:8887 & manufacturer’s specifications @6 kg/10 sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the Material uniformly at specified rates and temperatures (including cleaning of road surface) as per MoRTH specification : Cl. 502, 112 | 2100 | Sqm | |
177 | 177 | Providing and applying tack coat on the prepared surface, with bitumen emulsion as per IS:8887 & manufacturer’s specifications @0.2 kg/sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the Material uniformly at specified rates and temperatures (including cleaning of road surface) as per MoRTH specification Cl. 502, 112. | 2100 | Sqm | |
178 | 178 | Providing and applying tack coat on the prepared surface, with bitumen VG10 as per IS:8887 & manufacturer’s specifications @0.2 kg/sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the Material uniformly at specified rates and temperatures (including cleaning of road surface) as per MoRTH specification Cl. 502, 112. | 2100 | Sqm | |
179 | 179 | Providing and laying Bituminous Macadam on prepared surface with specified graded crushed aggregates as per Table 500-7, Grading-2, for base/binding course including loading of aggregates with F.E. loader and heating & mixing of stone aggregate and bitumen (including cost of anti-stripping compound, wherever required) in hot mix plant (40-60 TPH), transporting the mixed Material in tipper to paver (sensor as per clause 504.3.5), and laying mixed Material with paver finisher to the required level and grade, rolling by power roller and vibratory compactor as per Cl. 501.6 & 501.7 to achieve the desired density (approved by the department) excluding cost of primer/tack coat. [MoRTH Specification : Clause 504, 112]. with all lead & lift.50/75mm compacted thickness with 3.3% bitumen VG30 grade | 105 | Cum | |
180 | 180 | Providing and laying Bituminous Concrete as per Design Mix on prepared surface with specified graded stone aggregates as per Table 500-17, for wearing course including loading of aggregates with F.E. loader and hot mixing of binder (including cost of anti-stripping compound, wherever required) and 3% cement filler with aggregates in Hot Mix Plant 40-60 TPH, transporting the mixed Material with tipper to paver and laying with sensor paver finisher (as per clause 504-3.5) to the required level, grades and rolling with vibratory compactor and pneumatic tyred roller 150-250 kN, TP = 0.7 Mpa, to achieve the desired density (approved by the department as per job mix) excluding cost of primer/tack coat. (MoRTH specification : clause 507). with all lead & lift .30-45mm compacted with 6% binder .(a) With straight run bitumen grade VG30 | 63 | Cum | |
181 | 181 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous SurfaceProviding and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. | 240 | Sqm | |
182 | 182 | Supply of retro reflective signboards size 1800×1200mm made out of 2mm thick aluminium sheet duly farmed with 40mm MS black tube (Medium class) as per IS 1239 (Part-I) 1979 with two supports each side 75mm long and 40mm MS black tube (Medium class) as per 1239 (Part-I) 1979 2.03 meter long each and also provision of hold fasts of MS bars 12mm and 25cm long two on each post. The sheet has to be stove enameled or epoxy painting one side and other retro-reflective high intensity green base & white retro-reflective letter & numerals have to be made as per IRC 30-1968 and the board shall be conformed to the MoRTH specifications (2001 edition clause 801) post and outer frame of board to be painted with black and white strips of synthetic enamel paint with black and white strips. | 4 | Nos | |
183 | 183 | Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes. | 22050 | Kg | |
184 | 184 | Supplying and fixing of 10 mm thick Multiwall 5 Layers coloured Polycarbonate sheet with cox well/Alcox fixing system and EPDM Gasket as approved by Engineer-in-charge with all approved by Engineer-in-charge with all necessary accessories for making joints water tight & safely tied with steel framework including all taxes and duties etc. complete. | 630 | sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail