}

Repair Maint Of Water Supply Distribution Network And Allied Infrastructure At Digiana And Bd Bari Mil Stn Under Ge Kaluchak, Kaluchak-Jammu And Kashmir

Military Engineer Services-MES has published Repair Maint Of Water Supply Distribution Network And Allied Infrastructure At Digiana And Bd Bari Mil Stn Under Ge Kaluchak. Submission Date for this Tender is 16-02-2021. Water Supply Project Tenders in Kaluchak Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

26676393
Corrigendum : Repair Maint Of Water Supply Distribution Network And Allied Infrastructure At Digiana And Bd Bari Mil Stn Under Ge Kaluchak
Open Tender
Indian
Jammu And Kashmir
Kaluchak
16-02-2021

Tender Details

Repair Maint Of Water Supply Distribution Network And Allied Infrastructure At Digiana And Bd Bari Mil Stn Under Ge Kaluchak

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 29-Jan-2021 Revision of BOQ BOQ 09-02-2021
2 09-Feb-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 16-02-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 38700.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: REPAIR / MAINT OF WATER SUPPLY DISTRIBUTION NETWORK AND ALLIED INFRASTRUCTURE AT DIGIANA AND BD BARI MIL STN UNDER GE KALUCHAK
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Labour only for attending day to day (including sundays and holidays) external / internal water supply complaints/ breakdowns of all nature i.e leakage in galvanized iron water supply pipe lines of bore 15mm to 80mm/ fitting/ fixture, leakage in water pumping sets, over flow of overhead tank, no water supply, taking out water from trenches/ valve pit chambers during repair including necessary excavation, returning filling in and removal as per site requirement, complete all as specified & directed.\nNotes for Srl Item No.1 \n(i) Any material required for attending complaints shall be measured and paid separately under respective item herein after as 'Supply only'. \n(ii) The complaints shall be attended and the defects shall be rectified by a team of expert and experienced plumber/pipe fitter (2 Nos Pipe fitter & 2 Nos Helpers) as applicable assisted with adequate number of helpers as directed. 300 EACH JOB
2 1.0001 (iii) The complaints shall be attended and defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 50/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues. Contractor rep shall be available wef 0800 Hrs to 2000 Hrs to receive and notify the complaint.\n(iv) In case, after checking and attending the defect, it is not possible to rectify the defects within 08 Hrs the facts shall be brought to the notice of Engineer-in-charge by the contractor /his rep. If engineer-in-charge is satisfied with contractors view, no recovery will be made.\n(vi) Cutting of GI pipe in position and threading is also deemed to be included in the job rate (Fitting and fixtures will be measured and paid separetely under respective item of Sch A.\n
3 1.0002 (vii) All Transport, T&P such as JCB/ Dewatering pumpset/ DG set required for attending the complaints shall be provided by the Contractor. \n(viii) The pipe fitter shall always be in possession of die set complete with cutters, taps, pipe wrench, chain wrench, caulking tools, complete set of spanners and ladders etc., as required at site. \n(ix) The complaints for the above work shall be collected by contractor rep from MES maint incharge / JE E/M on daily basis. Required stationary such as complaint register, job card etc shall be arranged and maintained by contractor.
4 2 Supply only 15mm bore GI Socket medium grade ISI Marked, complete all as specified & directed. 20 EACH
5 3 Supply only 20mm bore GI Socket medium grade ISI Marked, complete all as specified & directed. 20 EACH
6 4 Supply only 25mm bore GI Socket medium grade ISI Marked, complete all as specified & directed. 30 EACH
7 5 Supply only 40mm bore GI Socket medium grade ISI Marked, complete all as specified & directed. 10 EACH
8 6 Supply only 50mm bore GI Socket medium grade ISI Marked, complete all as specified & directed. 10 EACH
9 7 Supply only 80mm bore GI Socket medium grade ISI Marked, complete all as specified & directed. 2 EACH
10 8 Supply only 15mm bore GI Elbow medium grade ISI Marked, complete all as specified & directed. 10 EACH
11 9 Supply only 20mm bore GI Elbow medium grade ISI Marked, complete all as specified & directed. 20 EACH
12 10 Supply only 25mm bore GI Elbow medium grade ISI Marked, complete all as specified & directed. 20 EACH
13 11 Supply only 40mm bore GI Elbow medium grade ISI Marked, complete all as specified & directed. 10 EACH
14 12 Supply only 50mm bore GI Elbow medium grade ISI Marked, complete all as specified & directed. 10 EACH
15 13 Supply only 15mm bore GI bend medium grade ISI Marked, complete all as specified & directed. 10 EACH
16 14 Supply only 20mm bore GI bend medium grade ISI Marked, complete all as specified & directed. 10 EACH
17 15 Supply only 25mm bore GI bend medium grade ISI Marked, complete all as specified & directed. 10 EACH
18 16 Supply only 40mm bore GI bend medium grade ISI Marked, complete all as specified & directed. 5 EACH
19 17 Supply only 50mm bore GI bend medium grade ISI Marked, complete all as specified & directed. 5 EACH
20 18 Supply only 15mm bore GI union medium grade ISI Marked, complete all as specified & directed. 15 EACH
21 19 Supply only 20mm bore GI union medium grade ISI Marked, complete all as specified & directed. 40 EACH
22 20 Supply only 25mm bore GI union medium grade ISI Marked, complete all as specified & directed. 40 EACH
23 21 Supply only 40mm bore GI union medium grade ISI Marked, complete all as specified & directed. 20 EACH
24 22 Supply only 50mm bore GI union medium grade ISI Marked, complete all as specified & directed. 20 EACH
25 23 Supply only 15mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked, complete all as specified & directed. 20 EACH
26 24 Supply only 20mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked, complete all as specified & directed. 50 EACH
27 25 Supply only 25mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked, complete all as specified & directed. 40 EACH
28 26 Supply only 40mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked, complete all as specified & directed. 20 EACH
29 27 Supply only 50mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked, complete all as specified & directed. 20 EACH
30 28 Supply only 25mmx15mm bore GI reducing socket, medium grade ISI Marked, complete all as specified & directed. 20 EACH
31 29 Supply only 20mmx15mm bore GI reducing socket, medium grade ISI Marked, complete all as specified & directed. 15 EACH
32 30 Supply only 25mmx20mm bore GI reducing socket, medium grade ISI Marked, complete all as specified & directed. 20 EACH
33 31 Supply only 50mmx40mm bore GI reducing socket, medium grade ISI Marked, complete all as specified & directed. 10 EACH
34 32 Supply only 40mmx20mm bore GI reducing socket, medium grade ISI Marked, complete all as specified & directed. 20 EACH
35 33 Supply only 40mmx25mm bore GI reducing socket, medium grade ISI Marked, complete all as specified & directed. 20 EACH
36 34 Supply only 50mmx25mm bore GI reducing socket, medium grade ISI Marked, complete all as specified & directed. 10 EACH
37 35 Supply only 15mm x 15mm x 15mm bore GI Tee, medium grade ISI Marked, complete all as specified & directed. 20 EACH
38 36 Supply only 20mm x 20mm x 15mm bore GI Tee, medium grade ISI Marked, complete all as specified & directed. 20 EACH
39 37 Supply only 20mm x 20mm x 20mm bore GI Tee, medium grade ISI Marked, complete all as specified & directed. 20 EACH
40 38 Supply only 25mm x 25mm x 25mm bore GI Tee, medium grade ISI Marked, complete all as specified & directed. 20 EACH
41 39 Supply only 25mm x 25mm x 15mm bore GI Tee, medium grade ISI Marked, complete all as specified & directed. 20 EACH
42 40 Supply only 25mm x 25mm x 20mm bore GI Tee, medium grade ISI Marked, complete all as specified & directed. 20 EACH
43 41 Supply only 40mm x 40mm x 40mm bore GI Tee, medium grade ISI Marked, complete all as specified & directed. 10 EACH
44 42 Supply only 40mm x 40mm x 20mm bore GI Tee, medium grade ISI Marked, complete all as specified & directed. 10 EACH
45 43 Supply only 40mm x 40mm x 25mm bore GI Tee, medium grade ISI Marked, complete all as specified & directed. 20 EACH
46 44 Supply only 50mm x 50mm x 25mm bore GI Tee, medium grade ISI Marked, complete all as specified & directed. 10 EACH
47 45 Supply only 15mm bore GI solid plug, heavy duty, ISI Marked, complete all as specified & directed. 5 EACH
48 46 Supply only 20mm bore GI solid plug, heavy duty, ISI Marked, complete all as specified & directed. 5 EACH
49 47 Supply only 25mm bore GI solid plug, heavy duty, ISI Marked, complete all as specified & directed. 5 EACH
50 48 Supply only 40mm bore GI solid plug, heavy duty, ISI Marked, complete all as specified & directed. 2 EACH
51 49 Supply only 50mm bore GI solid plug, heavy duty, ISI Marked, complete all as specified & directed. 2 EACH
52 50 Labour only for attending day to day (including sundays and holidays) external/ internal water supply complaints/ breakdowns of all nature i.e leakage in cast iron/ ductile iron water pipe lines of bore 80mm to 200mm/ fitting/fixture/ Specials, leakage in water pumping sets, over flow of overhead tank, no water supply, taking out water from trenches/ valve pit chambers during repair including necessary excavation, returning filling in and removal as per site requirement complete all as specified & directed.\nNotes for Srl Item No.50.\n(i) Any material such as Lead, spun yarn, CI specials, Lead joints, D-joints, Mechanical joints, clamps joints etc required for attending complaints shall be measured and paid separately under respective item here-in-after as 'Supply only'. \n(ii) The complaints shall be attended and the defects shall be rectified by a team of expert and experienced plumber/pipe fitter (one pipe fitter & 2 Nos helpers) as applicable assisted with adequate numbers of helpers as directed. 110 EACH JOB
53 50.0001 (iii) The complaints shall be attended and defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 50/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues. Contractor rep shall be available wef 0800 Hrs to 2000 Hrs to receive and notify the complaint.\n(iv) In case, after checking and attending the defect, it is not possible to rectify the defects within 08 Hrs the facts shall be brought to the notice of Engineer-in-charge by the contractor /his rep. If engineer-in-charge is satisfied with contractors view, no recovery will be made.\n(vi) Cutting/ welding/ connecting/ threading of CI/DI pipe in position and threading for insertion of CI/ DI/ GI specials and fittings is also deemed to be included in the job rate (Fitting and fixtures/specials will be measured and paid separetely under respective item of Sch A as 'Supply only'.\n
54 50.0002 (vii) All transport and T&P such as JCB/ CRANE/ WELDING MACHINE/ DG SETS etc required for attending the complaints shall be provided by the contractor. \n(viii) The pipe fitter shall always be in possession of die set complete with cutters, taps, pipe wrench, chain wrench, caulking tools, complete set of spanners and ladders etc., as required at site. \n(ix) The complaints for the above work shall be collected by contractor rep from MES maint incharge / JE E/M on daily basis. Required stationary such as complaint register, job card etc shall be arranged and maintained by contractor.
55 51 Supply only run lead including spurn yarn suitable for 80mm bore CI/DI pipe, complete all as specified & directed. 10 EACH
56 52 Supply only run lead including spurn yarn suitable for 100mm bore CI/DI pipe, complete all as specified & directed. 20 EACH
57 53 Supply only run lead including spurn yarn suitable for 150mm bore CI/DI pipe, complete all as specified & directed. 75 EACH
58 54 Supply only run lead including spurn yarn suitable for 200mm bore CI/DI pipe, complete all as specified & directed. 5 EACH
59 55 Attending emergency breakdown (including sundays and holidays) of water supply installations where directed (installations under GE Kaluchak), lifting defective submersible pumpset, column pipes (any number) from bore well (any depth/size), setting aside and stacking column pipes for reuse, lowering of submersible pumpset alongwith column pipes in the bore well as existing and making water and electrical connections as existing for running of pump motors, complete all as specified & directed. 40 EACH JOB
60 55.0001 Notes : \n(i) Lifting / lowering shall be measured and paid only once for same nature of repair.\n(ii) Contractor shall attend and rectify the breakdown within 8 hours failing which a recovery of Rs 500/ hour shall be effected.\n(iii) In case the submersible pump set falls down during Extn/ Lowering/ Lifting, No extra payment to be made to the contractor for this work.
61 56 Supply only rubber gasket required against Serial Item No 55 here-in-before as per existing dia, complete all as specified & directed. 350 EACH
62 57 Supply only nut and bolt and washer required against Serial Item No 55 here-in-before as per existing dia and length, complete all as specified & directed. 100 PER KILOGRAM
63 58 Repairs to submersible pumpset of capacity 30 to 35 HP, 3 phase, 415 volts involving of following operations :-\n(a) Opening of the defective motor in MES yard / Pump House/ Workshop ( as approved by GE), cleaning the covers and parts as applicable in presence of Engineer-in-Charge to ascertain the quantum of defects and repairs involved.\n(b) Transporting the defective motor to contractor's workshop for repairs as directed by the Engineer in Charge and carrying out the necessary repairs including replacement of defective unserviceable parts.\n(c) Assembling the motor after repair.\n(d) Spray painting the repaired motor externally with two coats of synthetic enamelled paint of shade as approved by the Engineer-in-Charge.\n(e) Transporting the repaired motor to MES yard/ Pump House and carrying out necessary test in presence of Engineer-in-Charge to establish the functionability of the repaired motor up to the entire satisfaction of the Engineer-in-Charge. 2 EACH JOB
64 59 All as per Srl item No.58 above but submersible pumpset of capacity 20 to 25 HP. 13 EACH JOB
65 60 All as per Srl item No.58 here-in-before but submersible pumpset of capacity 15 to 17.5 HP. 5 EACH JOB
66 61 All as per Srl item No.58 here-in-before but submersible pumpset of capacity 10 to 12.5 HP. 1 EACH JOB
67 61.0001 Notes for Serial Item No 58 to 61 here-in-before :\n(i) Any parts required to be replaced during servicing, overhauling of motor, pump set etc. shall be measured and paid for separately under appropriate item as 'Supply only' of this schedule. However labour element involved in replacement is deemed to be included in quoted rates against these items.\n(ii) Any minor repairs involved to make the motor, pump functional even if notified by the Engineer-in-Charge shall be carried out by the contractor without any extra cost to the department.\n(iii) Rewinding of stator of motor, any machine to pump where involved shall be measured and paid separately against relevant item of this schedule.\n(iv) Greasing/oiling etc of parts as required shall be done by the contractor without any extra cost to the department.
68 62 Supply only the following items to be incorporated against Serial Item No 58 to 61 above, suitable for submersible pumpset of capacity 10 HP to 35 HP of existing make, complete all as specified & directed :-
69 62.0001 (a). Water lubricant seal suitable for motor 24 EACH
70 62.0002 (b). T-bolt for motor 50 EACH
71 62.0003 (c). Thrust bearing for motors as per existing 20 EACH
72 62.0004 (d). MS Flanged reducer as per existing 6 EACH
73 62.0005 (e). Stud as per existing size 150 EACH
74 62.0006 (f). Neck ring 150 EACH
75 62.0007 (g). Stainless steel key for impeller shaft 50 EACH
76 62.0008 (h). Impeller ( CI) 10 EACH
77 62.0009 (j). Stainless steel motor - pump coupler 5 EACH
78 62.001 (k) Bush (gun metal) for pump as per existing 50 EACH
79 62.0011 (l). Bush (rubber) for pump as per existing 50 EACH
80 62.0012 (m) Repair to pump shaft 15 EACH JOB
81 62.0013 (n) Repair to motor shaft 10 EACH
82 62.0014 (o) Bush to motor shaft as per existing 50 EACH JOB
83 62.0015 (p). Repair to impeller by brazing or as required for 5 to 35 HP Pump set complete all as specified and directed. 50 EACH
84 62.0016 (q) Sand guard 5 EACH
85 62.0017 (r) Motor adaptor 2 EACH
86 62.0018 (s) Impeller sleeve(SS) 20 EACH
87 63 Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZ of capacity 10 - 12.5 HP with water proof insulated copper wire of existing gauge and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed. Make of wire : Atlas/ Devidayal. \n 1 EACH JOB
88 64 Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZ of capacity 15 - 17.5 HP with water proof insulated copper wire of existing gauge and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed. Make of wire : Atlas/ Devidayal. \n 3 EACH JOB
89 65 Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZ of capacity 20 - 25 HP with water proof insulated copper wire of existing gauge and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed. Make of wire : Atlas/ Devidayal. \n 6 EACH JOB
90 66 Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZ of capacity 30 - 35 HP with water proof insulated copper wire of existing gauge and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed. Make of wire : Atlas/ Devidayal. \n 2 EACH JOB
91 67 Servicing/ overhauling of centrifugal pump, monoblock motor pump set up to the capacity of 300 gallons/ min of 35 m head, 2900 RPM coupled with 50 HP 3 phase, 415 V, 50HZ induction motor including carrying out maintenance check along with following repairs :-\n(a) Dismantling of monoblock motor pump set in presence of MES representative and display all the parts without damage any portion for inspection of Engineer-in-Charge to ascertain the serviceability of existing parts.\n(b) Heating, varnishing to stator, rotor with super quality varnish and drying out properly with external heat.\n(c) Cleaning, washing of bearing and use right quantity of ball bearing grease for bearing.\n(d) Checking play of impeller and bushing of pump.\n 4 EACH JOB
92 67.0001 (e) Assembling of motor with old serviceable parts and replacement of unserviceable parts with new as ordered where necessary.\n(f) Installation of motor by making connections as per existing and testing on load. \n(g) Cost for loading/ unloading, any type of T&P like chain pulley/ crane or any transportation required to take the centrifugal pump or motor of any size and capacity to workshop (as approved by GE) and back shall be deemed to be included in this item.
93 67.0002 Notes for Serial Item No 67 :-\n(i) Any parts required to be replaced during servicing, overhauling of motor, pump set etc shall be measured and paid for separately under appropriate item as 'Supply only' of this schedule. However labour element involved in replacement is deemed to be included in quoted rates against this item.\n(ii) Any minor repairs involved to make the motor, pump functional even if notified by the Engineer in Charge shall be carried out by the contractor without any extra cost to the department.\n(iii) Rewinding of stator, replacement of old unserviceable bearings of pumps and motors, any machine to pump where involved shall be measured and paid separately against relevant item of this schedule.\n(iv) Greasing / oiling etc of parts as required shall be done by the contractor without any extra cost to the department.
94 68 Rewinding of stator of induction motor working on 3 phase, 440 volts for centrifugal monoblock motor pump set of capacity 50 HP with bare copper winding of appropriate gauge recommended by OEM and as approved by GE, complete all as specified & directed. \nMake of wire : Atlas / Devidayal 1 EACH JOB
95 69 Supply only the following items to be incorporated against Serial Item No 67 above, suitable for centrifugal monoblock motor pumpset of capacity 50 HP of existing make, complete all as specified & directed :-
96 69.01 (a) Body Spacer Bush 20 EACH
97 69.02 (b) Gland shaft sleeve (SS) suitable for pump of capacity 50HP capacity as per site. 4 EACH
98 69.03 (c) O Ring Cart Part No. 52201/ 52203/ 52202 14 EACH
99 69.04 (d) Oil seal (DE & NDE) as per existing 12 EACH
100 69.05 (e) Ball/Thrust bearing Nos NU 208 K suitable for different pump motor of 25 - 60HP capacity as per site. 1 EACH SET
101 69.06 (f) Ball/Thrust bearing Nos NU 210 K suitable for different pump motor of capacity as per site. 1 EACH SET
102 69.07 (g) Ball/Thrust DE bearing Nos NU 307 suitable for different pump motor of capacity as per site. Make AEC 1 EACH
103 69.08 (h)Ball/Thrust DE bearing Nos NU 306 suitable for different pump motor of capacity as per site. 1 EACH
104 69.09 (j) Ball/Thrust DE bearing Nos NU 308 suitable for different pump motor of capacity as per site. 1 EACH
105 69.1 (k) Ball/Thrust DE bearing Nos NU 309 suitable for different pump motor of capacity as per site. 1 EACH
106 69.11 (l) Ball/Thrust DE bearing Nos NU 310 suitable for different pump motor of capacity as per site. 1 EACH
107 69.12 (m) Ball/Thrust DE bearing Nos NU 411 suitable for different pump motor of capacity as per site. 1 EACH
108 69.13 (n) Ball/Thrust DE bearing Nos NU 412 suitable for different pump motor of capacity as per site. 1 EACH
109 69.14 (o) Ball/Thrust bearing Nos 6305 suitable for different pump motor of capacity as per site. Make NBC 1 EACH
110 69.15 (p) Ball/Thrust bearing Nos 6306 suitable for different pump motor of capacity as per site. Make NBC 1 EACH
111 69.16 (q) Ball/Thrust bearing Nos 7308 suitable for different pump motor of capacity as per site. Make: ZKL 1 EACH
112 69.17 (r) Ball/Thrust bearing Nos 7309 suitable for different pump motor of capacity as per site. Make: ZKL 1 EACH
113 69.18 (s) Ball/Thrust bearing Nos 7310 suitable for different pump motor of capacity as per site. Make: ZKL 1 EACH
114 69.19 (t) Ball/Thrust bearing Nos 7311 suitable for different pump motor of capacity as per site. Make: ZKL 1 EACH
115 69.2 (u) Ball/Thrust bearing Nos 7312 suitable for different pump motor of capacity as per site. Make: ZKL 1 EACH
116 69.21 (v) Ball/Thrust bearing Nos 6311 suitable for different pump motor of capacity as per site. Make: NBC 1 EACH
117 69.22 (w) Thrust plate set of CI. 1 EACH
118 69.23 (x) Bearing protection water shallenger 4 EACH
119 69.24 (y) Brg bracket for 25 to 50 HP Pump motor set 2 EACH
120 69.25 (z) Neck ring 25 EACH
121 69.26 (aa) Body bush 25 EACH
122 69.27 (ab) Stud with nut of any size 25 EACH
123 69.28 (ac) Pump Shaft welding and machining 4 EACH JOB
124 69.29 (ad) High quality plastic/ rubber coupling having No. TC-15, TC-17, TC-19 or star coupling as required at site suitable for coupling of motor pump of different cap varying from 25 HP to 125 HP and all as specified. 2 EACH
125 69.3 (ae) Gland packing as per existing size 5 PER KILOGRAM
126 69.31 (af) Gland Bush with gland plate as per existing size 4 EACH SET
127 69.32 (ag) Coupling bolt 8 EACH
128 70 Column pipe made of MS pipe 100mm bore, heavy duty, ISI marked, 3 Mtr length each welded with MS flanged drilled for nut bolt and washer including rubber gasket 3 mm thick, complete all as specified & directed. 5 EACH JOB
129 71 PVC insulated and sheathed flat 3 core, 16 Sqmm copper stranded conductor water proof submersible cable fixed to submersible monoblock pump set to starter as directed including testing & taking out old unserviceable cable, complete all as specified & directed. 180 PER RUNNING METRE
130 72 Cleaning the under ground water storage sump of capacity 50000 gallons (twin or single chamber) by draining the complete water and brushing the surfaces with iron brush and removing the complete mud/silt and getting washed the complete inner surfaces of the sump using the bleaching powder and writing date of cleaning the tank, complete all as specified & directed by the Engr-in-Charge. \n\n 3 EACH JOB
131 72.0001 Note : All type of T & P required for cleaning deemed to be included in the quoted rate. The unit rate quoted deemed to be including draining of water with mechanical equipments and working in water and mud etc. The unit rate quoted deemed to be include all safety precuation which shall be taken while working on RCC overhead reservoir/ Under ground sump and Contractor or his engineer shall be available during execution of the job. Lighting arrangement if required to be provided by the Contractor, temporarily at his own arrangements and the amount quoted for that is deemed to be inclusive in the unit rate and electricity / diesel shall not be provided by the department.
132 73 Cleaning the under ground water storage sump of capacity 25000 gallons (twin or single chamber) by draining the complete water and brushing the surfaces with iron brush and removing the complete mud/silt and getting washed the complete inner surfaces of the sump using the bleaching powder and writing date of cleaning the tank, complete all as specified & directed by the Engr-in-Charge. \n\n 1 EACH JOB
133 73.0001 Note : All type of T & P required for cleaning deemed to be included in the quoted rate. The unit rate quoted deemed to be including draining of water with mechanical equipments and working in water and mud etc. The unit rate quoted deemed to be include all safety precuation which shall be taken while working on RCC overhead reservoir/ Under ground sump and Contractor or his engineer shall be available during execution of the job. Lighting arrangement if required to be provided by the Contractor, temporarily at his own arrangements and the amount quoted for that is deemed to be inclusive in the unit rate and electricity / diesel shall not be provided by the department.
134 74 Cleaning the over head water reservoir of capacity 25000 Gallons (twin or single chamber) by draining the complete water and brushing the surfaces with iron brush and removing the complete mud/silt and getting washed the complete inner surfaces of the tank using the bleaching powder and applying a coat of white wash inside the tank including bottom, sides and ceiling and writing date of cleaning the tank out side complete all as specified and directed. , complete all as specified & directed by the Engr-in-Charge. \n\n 1 EACH JOB
135 74.0001 Note : All type of T & P required for cleaning deemed to be included in the quoted rate. The unit rate quoted deemed to be including draining of water with mechanical equipments and working in water and mud etc. The unit rate quoted deemed to be include all safety precuation which shall be taken while working on RCC overhead reservoir/ Under ground sump and Contractor or his engineer shall be available during execution of the job. Lighting arrangement if required to be provided by the Contractor, temporarily at his own arrangements and the amount quoted for that is deemed to be inclusive in the unit rate and electricity / diesel shall not be provided by the department.
136 75 Cleaning the over head water reservoir of capacity 30000 Gallons (twin or single chamber) by draining the complete water and brushing the surfaces with iron brush and removing the complete mud/silt and getting washed the complete inner surfaces of the tank using the bleaching powder and applying a coat of white wash inside the tank including bottom, sides and ceiling and writing date of cleaning the tank out side complete all as specified and directed. , complete all as specified & directed by the Engr-in-Charge. \n\n 3 EACH JOB
137 75.0001 Note : All type of T & P required for cleaning deemed to be included in the quoted rate. The unit rate quoted deemed to be including draining of water with mechanical equipments and working in water and mud etc. The unit rate quoted deemed to be include all safety precuation which shall be taken while working on RCC overhead reservoir/ Under ground sump and Contractor or his engineer shall be available during execution of the job. Lighting arrangement if required to be provided by the Contractor, temporarily at his own arrangements and the amount quoted for that is deemed to be inclusive in the unit rate and electricity / diesel shall not be provided by the department.
138 76 Cleaning the over head water reservoir of capacity 50000 Gallons (twin or single chamber) by draining the complete water and brushing the surfaces with iron brush and removing the complete mud/silt and getting washed the complete inner surfaces of the tank using the bleaching powder and applying a coat of white wash inside the tank including bottom, sides and ceiling and writing date of cleaning the tank out side complete all as specified and directed. , complete all as specified & directed by the Engr-in-Charge. \n\n 5 EACH JOB
139 76.0001 Note : All type of T & P required for cleaning deemed to be included in the quoted rate. The unit rate quoted deemed to be including draining of water with mechanical equipments and working in water and mud etc. The unit rate quoted deemed to be include all safety precuation which shall be taken while working on RCC overhead reservoir/ Under ground sump and Contractor or his engineer shall be available during execution of the job. Lighting arrangement if required to be provided by the Contractor, temporarily at his own arrangements and the amount quoted for that is deemed to be inclusive in the unit rate and electricity / diesel shall not be provided by the department.
140 77 Cleaning the RCC over head water reservoir of capacity 100000 Gallons (twin or single chamber) by draining the complete water and brushing the surfaces with iron brush and removing the complete mud/silt and getting washed the complete inner surfaces of the tank using the bleaching powder and applying a coat of white wash inside the tank including bottom, sides and ceiling and writing date of cleaning the tank out side, complete all as specified and directed. , complete all as specified & directed by the Engr-in-Charge. \n\n 1 EACH JOB
141 77.0001 Note : All type of T & P required for cleaning deemed to be included in the quoted rate. The unit rate quoted deemed to be including draining of water with mechanical equipments and working in water and mud etc. The unit rate quoted deemed to be include all safety precuation which shall be taken while working on RCC overhead reservoir/ Under ground sump and Contractor or his engineer shall be available during execution of the job. Lighting arrangement if required to be provided by the Contractor, temporarily at his own arrangements and the amount quoted for that is deemed to be inclusive in the unit rate and electricity / diesel shall not be provided by the department.
142 78 Submersible pump starter, 3 phase fully automatic star delta starter suitable for motor capacity 12/12.5 HP in sheet metal enclosure including heavy duty 4 pole contactor type TC1-DX, overload relay type LR3D/LR1D (relay range 7-10A), auto start switch, three position selector switch for SPP auto/ SPP manual/ manual, dual analog VA meter, hour meter, RYB LED indicator, motor ON & Trip LED indicator, TP 'C' curve MCB for short circuit protection, complete all as specified & directed. \nMake : C&S Cat Part No. BE3-D1735-314/ Schneider Cat Part No.MS23AI17 or equivalent in Siemens/ ABB/ BCH/ L&T 1 EACH
143 79 Submersible pump starter, 3 phase fully automatic star delta starter suitable for motor capacity 15 HP in sheet metal enclosure including heavy duty 4 pole contactor type TC1-DX, overload relay type LR3D/LR1D (relay range 9-14A), auto start switch, three position selector switch for SPP auto/ SPP manual/ manual, dual analog VA meter, hour meter, RYB LED indicator, motor ON & Trip LED indicator, TP 'C' curve MCB for short circuit protection, complete all as specified & directed. \nMake : C&S Cat Part No. BE3-D1735-316X/ Schneider Cat Part No.MS23AI18 or equivalent in Siemens/ ABB/ BCH/ L&T 1 EACH
144 80 Submersible pump starter, 3 phase fully automatic star delta starter suitable for motor capacity 20 HP in sheet metal enclosure including heavy duty 4 pole contactor type TC1-DX, overload relay type LR3D/LR1D (relay range 13-18A), auto start switch, three position selector switch for SPP auto/ SPP manual/ manual, dual analog VA meter, hour meter, RYB LED indicator, motor ON & Trip LED indicator, TP 'C' curve MCB for short circuit protection, complete all as specified & directed. \nMake : C&S Cat Part No. BE3-D2235-321/ Schneider Cat Part No.MS23AI20 or equivalent in Siemens/ ABB/ BCH/ L&T 1 EACH
145 81 Submersible pump starter, 3 phase fully automatic star delta starter suitable for motor capacity 25 HP in sheet metal enclosure including heavy duty 4 pole contactor type TC1-DX, overload relay type LR3D/LR1D (relay range 23-32A), auto start switch, three position selector switch for SPP auto/ SPP manual/ manual, dual analog VA meter, hour meter, RYB LED indicator, motor ON & Trip LED indicator, TP 'C' curve MCB for short circuit protection, complete all as specified & directed. \nMake : C&S Cat Part No. BE3-D2535-322/ Schneider Cat Part No.MS23AI21 or equivalent in Siemens/ ABB/ BCH/ L&T 1 EACH
146 82 Submersible pump starter, 3 phase fully automatic star delta starter suitable for motor capacity 30 HP in sheet metal enclosure including heavy duty 4 pole contactor type TC1-DX, overload relay type LR3D/LR1D (relay range 38-50A), auto start switch, three position selector switch for SPP auto/ SPP manual/ manual, dual analog VA meter, hour meter, RYB LED indicator, motor ON & Trip LED indicator, TP 'C' curve MCB for short circuit protection, complete all as specified & directed. \nMake : C&S Cat Part No. BE3-D3235-322/ Schneider Cat Part No.MS23AI22 or equivalent in Siemens/ ABB/ BCH/ L&T 1 EACH
147 83 Submersible pump starter, 3 phase fully automatic star delta starter suitable for motor capacity 35 HP in sheet metal enclosure including heavy duty 4 pole contactor type TC1-DX, overload relay type LR3D/LR1D (relay range 38-50A), auto start switch, three position selector switch for SPP auto/ SPP manual/ manual, dual analog VA meter, hour meter, RYB LED indicator, motor ON & Trip LED indicator, TP 'C' curve MCB for short circuit protection, complete all as specified & directed. \nMake : C&S Cat Part No. BE3-D3235-353/ Schneider Cat Part No.MS23AI23 or equivalent in Siemens/ ABB/ BCH/ L&T 1 EACH
148 84 Cast lron sluice valve, non-rising type conforming to IS:14846-2000 of 150 mm bore consisting of SS spindle as per IS:6603, cast iron body, dome & wedge as per IS:210, greasy jute type gland packing, fasteners as per IS:1367, natural rubber gasket, CI manual hand wheel etc, complete double end flanged and drilled, of Class PN-1 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nuts, bolts and washers etc, testing, taking out old unserviceable sluice valve from pipeline and removing from site, complete all as specified & directed. 1 EACH
149 85 All as per Srl item No.84 above but 100mm bore. 1 EACH
150 86 Cast iron non return valve, single door confirming to IS:5312, Part-1 / BS EN 12334 (BS:5153) of 150mm bore, class PN 1.6 gun metal sheat and flap with flanged and drilled flanged ends including having bypass arrangement, complete all as specified & directed . 1 EACH
151 87 All as per Srl item No.86 above but 100mm bore. 1 EACH
152 88 Gun metal gate valve confirming to IS : 554/ BS21/ ISO 7 with iron wheel head screwed both ends for iron pipe including taking down old unserviceable valve, complete all as specified & directed for the following sizes :-
153 88.01 (a) 15mm bore 10 EACH
154 88.02 (b) 20mm bore 30 EACH
155 88.03 (c) 25mm bore 30 EACH
156 88.04 (d) 40mm bore 10 EACH
157 88.05 (e) 50mm bore 10 EACH
158 89 Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out in any type of soil for water supply pipe line etc complete all as specified & directed. \nNote : Due care shall be taken while deciding cable route for excavation. However any damage to Signal, BSNL, MES cable water/sewage pipe or any other service while excavation will be made good by the contractor and cost of the same for jointing material & labour is deemed to be included in the cost of excavation. 84 PER CUBIC METRE
159 90 Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specifed & directed. 81 PER CUBIC METRE
160 91 Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified & directed. 3 PER CUBIC METRE
161 92 Taking out cast iron water main/ ductile iron pipe line (including all fittings) with spigot and socket ends/ flanged pipes including burning out lead joints and recovering lead and removing to store for reuse, complete all as specified & directed for the following sizes :-\nNote : Earth work shall be measured and paid for separately under respective items.\n
162 92.01 (a) 80mm bore 18 PER RUNNING METRE
163 92.02 (b) 100mm bore 18 PER RUNNING METRE
164 92.03 (c) 150mm bore 18 PER RUNNING METRE
165 92.04 (d) 200mm bore 18 PER RUNNING METRE
166 93 Ductile iron pipe, socket & spigot with bulb type rubber tyton gasket and jointing material as per standard complete of class K-7 confirming to IS: 8329:2000 (latest revision), ISI marked laid in trenches/ fixed on pedestals etc including complete mortar lining (CML) and outside black bitumen coating etc complete all as specified & directed for the following sizes :- \nNote: Earth work & DI fittings will be measured and paid for separate under respective items.
167 93.01 (a) 80mm bore 18 PER RUNNING METRE
168 93.02 (b) 100mm bore 18 PER RUNNING METRE
169 93.03 (c) 150mm bore 18 PER RUNNING METRE
170 93.04 (d) 200mm bore 18 PER RUNNING METRE
171 94 Cast iron/ Ductile iron fittings confirming IS:9523 2000 of class K-12, PN-10 for spigot and socket pipe such as bends (any type, radius and angle), tapers any type (straight, bend, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc),Tee pieces single branch,Y junction, double branch, cross (all sockets or socket and spigot) collars caps and plugs upto 200 mm bore pipes, complete all as specified & directed\nNote : Earth work shall be measured and paid for separately under respective items. 200 PER KILOGRAM
172 95 Taking out existing old unserviceable /rusted / broken galvanised iron water main pipe line including all fittings, complete all as specified & directed for the following sizes :- \nNote : Earth work shall be measured and paid for separately under respective items.\n
173 95.01 (a) 15mm bore 106 PER RUNNING METRE
174 95.02 (b) 20mm bore 112 PER RUNNING METRE
175 95.03 (c) 25mm bore 118 PER RUNNING METRE
176 95.04 (d) 40mm bore 106 PER RUNNING METRE
177 95.05 (e) 50mm bore 112 PER RUNNING METRE
178 95.06 (f) 80mm bore 118 PER RUNNING METRE
179 95.07 (g) 100mm bore 106 PER RUNNING METRE
180 96 Galvanised iron medium grade water tubing with all fittings and fixtures (ISI marked) confirming to IS:1239, laid in trenches or fixed on wall or in any position including necessary saddles and iron clamps, complete all as specified & directed for the following sizes :- \nNote: The work shall be carried out at various locations under GE Kaluchak on external building walls upto a height of 4th story. Cost of necessary scaffolding arrangement shall be deemed included in the unit rate for these items.
181 96.01 (a) 15mm bore 100 PER RUNNING METRE
182 96.02 (b) 20mm bore 100 PER RUNNING METRE
183 96.03 (c) 25mm bore 100 PER RUNNING METRE
184 96.04 (d) 40mm bore 100 PER RUNNING METRE
185 96.05 (e) 50mm bore 100 PER RUNNING METRE
186 96.06 (f) 80mm bore 100 PER RUNNING METRE
187 96.07 (g) 100mm bore 100 PER RUNNING METRE
188 97 Re-routing / relaying of serviceable GI pipe line obtained from Serial Item No 113 here-in-before through cleaning / scrubbing internally and externally, complete all as specified & directed for the following sizes :- \nNotes :\n(i) Earth work shall be measured and paid for separately under respective items.\n(ii) Fittings such as sockets, union, Tee, bends, elbow required are demeed to be included in unit rate of these items.\n
189 97.01 (a) 15mm bore 6 PER RUNNING METRE
190 97.02 (b) 20mm bore 12 PER RUNNING METRE
191 97.03 (c) 25mm bore 18 PER RUNNING METRE
192 97.04 (d) 40mm bore 6 PER RUNNING METRE
193 97.05 (e) 50mm bore 12 PER RUNNING METRE
194 97.06 (f) 80mm bore 18 PER RUNNING METRE
195 97.07 (g) 100mm bore 6 PER RUNNING METRE
196 98 Chlorine test kit with coloured sample complete with all testing fitments and OT solution in rexene finish box, complete all as specified & directed. Make : RMCO KOLKATA 5 EACH
197 99 Supply only OT solution for chlorine test 500 ML bottle, complete all as specified & directed. \nMake : RMCO KOLKATA 5 EACH BOTTLE
198 100 Carrying out physical, chemical & bacteriological analysis all as per IS:10500 - 2012 for drinking water (Fresh potable/ raw water from Pump Houses at various locations under GE Kaluchak) from approved govt or other approved labs, complete all as specified & directed.\nNotes : (a) The rate quoted deemed to inclusive of collecting and transporting water sample in sterilised bottle/ PVC container & submitting the same for testing on same day.\n(b) Water sample from one borewell will be considered as one job. 18 EACH JOB
199 101 Supply only calcium hypochlorite (chlorine content 65% to 70%) high strength calcium based granular disinfectant in air tight container for water treatment more stable than chlorine gas and stronger than bleaching powder of following specifications :\n(a) Chemical analysis & physical observations :\nDescription : Whitish granules\nGranular size (Mesh passing through – 100 BSS) : 1.1 (± 0.1) % , Water / moisture: 5.00 (± 0.2) %\nOther insoluble Calcium salts: 1.1 (± 0.1) %\nMercury & other Heavy Metal contaminants : BDL.\nThe chlorination chemical must contain appropriate quantities of dispersants / corrosion inhibitors to prevent encrustation / scaling in distribution systems.\n 225 PER KILOGRAM
200 101.001 (b) Strength in terms of quantity of chlorination chemical required to obtain free chlorine of 1 ppm per lakh liters of water:\nRequirement must be 100 gm. per one lakh litre of water to achieve 05-1.0 ppm Av. Cl. at injection point (site & raw water quality variations may apply additionally).\n(c) Stability: Projected shelf life of chlorination chemical must be one year with minimal loss of chlorine. \nMake : M/s Sree Rayallaseema Hi strength Hypo Ltd (Brand: Name: Puri Chlor) or any product approved by E-in-C's Branch. \nNote: The Contractor shall provide original test certificate with hologram to the Engineer-in-charge .
201 102 Re-development of tube well in accordance with IS:2800 (Part-1) & IS:11189 by means of pumping by air compressor of minimum pressure 10Kg/cm2 (compressor to be arranged by contractor at his own cost) until sand free and clean water is obtained at the optimum yield (measuring yield of borewell by V notch method or any other approved method) including testing of water sample from Government approved Laboratory/ Regional Research Laboratory to confirm the potability of water as per IS-10500-2012 complete all as specified & directed.\nNotes :\n(a) The development shall be carried out in each water bearing zone and till the yield of the bore well improves at a fixed draw down of water. The stata chart shall be provided by the Department.\n(b). The cost of arranging and transportation of compressor and allied equipments required for development shall be deemed to be included in the quoted rate and nothing extra shall be admissible on this account. 32 PER HOUR
202 103 Taking out CI/ MS/ DI pipe flanged type of 150mm/100mm bore of rising main/ delivery /over flow of over head reservoir of height 30 metre, cleaning, welding and refixing with replacing nuts, bolts, rubber gasket/ gland packing etc including replacement of sluice valve as required at site, complete all as specified & directed.\nNote : The work shall be carried out at various installations under GE Kaluchak. Rates quoted includes for necessary scaffolding arrangement upto a heigfht of 30 metres. The sluice valve shall be measured and paid for separately under respective item. 1 EACH JOB
203 104 Repacking stuffing box of sluice valve spindle, replacement of worn out check nuts, repairs to gate assembly, replacement of jointing materials such as rubber gasket, nuts, bolts and washers gland rope including taking apart and reassembling for 80mm bore, complete all as specified & directed. 4 EACH
204 105 Repacking stuffing box of sluice valve spindle, replacement of worn out check nuts, repairs to gate assembly, replacement of jointing materials such as rubber gasket, nuts, bolts and washers gland rope including taking apart and reassembling for 100mm bore, complete all as specified & directed. 4 EACH
205 106 Repacking stuffing box of sluice valve spindle, replacement of worn out check nuts, repairs to gate assembly, replacement of jointing materials such as rubber gasket, nuts, bolts and washers gland rope including taking apart and reassembling for 150mm bore, complete all as specified & directed. 4 EACH
206 107 Repacking stuffing box of sluice valve spindle, replacement of worn out check nuts, repairs to gate assembly, replacement of jointing materials such as rubber gasket, nuts, bolts and washers gland rope including taking apart and reassembling for 200mm bore, complete all as specified & directed. 4 EACH
207 108 Taking out old unserviceable sluice valve of 80mm bore and refixing the same after refacing, regrinding, threading etc., as directed, complete all as specified & directed. 4 EACH
208 109 Taking out old unserviceable sluice valve of 100mm bore and refixing the same after refacing, regrinding, threading etc., as directed, complete all as specified & directed. 4 EACH
209 110 Taking out old unserviceable sluice valve of 150mm bore and refixing the same after refacing, regrinding, threading etc., as directed, complete all as specified & directed. 4 EACH
210 111 Taking out old unserviceable sluice valve of 200mm bore and refixing the same after refacing, regrinding, threading etc., as directed, complete all as specified & directed. 4 EACH
211 112 Packing glands of size 6-10mm, complete all as specified & directed.\nMake: Spitmaan/ Champion 6 PER KILOGRAM
212 113 Packing glands of size 11-25mm, complete all as specified & directed.\nMake: Spitmaan/ Champion 5 PER KILOGRAM
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail