}

Repair Maintenance And Replacement Of Water Supply Pipeline Street Light Fitting Lt Panels Ug Cables And External Electric Supply System Including Allied Items At Ratnagiri Under Ge I Cg Ratnagiri Repair , Maintenance And Replacement Of Water Supply Pipe, RATNAGIRI-Maharashtra

Military Engineer Services-MES has published Repair Maintenance And Replacement Of Water Supply Pipeline Street Light Fitting Lt Panels Ug Cables And External Electric Supply System Including Allied Items At Ratnagiri Under Ge I Cg Ratnagiri Repair , Maintenance And Replacement Of Water Supply Pipe. Submission Date for this Tender is 22-02-2021. Electrical Panel Tenders in RATNAGIRI Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

26674598
Corrigendum : Repair Maintenance And Replacement Of Water Supply Pipeline Street Light Fitting Lt Panels Ug Cables And External Electric Supply System Including Allied Items At Ratnagiri Under Ge I Cg Ratnagiri Repair , Maintenance And Replacement Of Water Supply Pipe
National Competitive Bid
Indian
Maharashtra
RATNAGIRI
22-02-2021

Tender Details

Repair Maintenance And Replacement Of Water Supply Pipeline Street Light Fitting Lt Panels Ug Cables And External Electric Supply System Including Allied Items At Ratnagiri Under Ge I Cg Ratnagiri

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 30-Jan-2021 Amendments Other 10-02-2021
2 08-Feb-2021 Dates Date 15-02-2021
3 15-Feb-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 22-02-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 6800.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: REPAIR, MAINTENANCE & REPLACEMENT OF WATER SUPPLY PIPELINE, STREET LIGHT FITTING, LT PANELS, UG CABLES AND EXTERNAL ELECTRIC SUPPLY SYSTEM INCLUDING ALLIED ITEMS AT RATNAGIRI UNDER GE(I) (CG) RATNAGIRI
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavation in trenches in hard/soft /disintegrated rocks & dense soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC poles/stays and struts etc and getting out including trimming sides and forming bottom surface all as specified and directed at site. 64.2 Cum
2 2 Returning, filling in including spreading, leveling, watering and well ramming excavated hard/soft /disintegrated rocks in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested, all as specifiedand directed at site Hard rocks shall be broken in small pieces before refilling and first low must be earth or muroom ) 44.87 Cum
3 3 Removing excavated material obtained from excavation to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed. 18.62 Cum
4 4 Taking out old existing G I Pipe of any make / any size including all fittings such as elbow, nipple, sockets all as specified. 60 RM
5 5 S&FGalvanised steel tubes light grade bore of pipe in mm 15 mm 10 RM
6 6 S&FGalvanised steel tubes light grade bore of pipe in mm 20 mm 10 RM
7 7 S&FGalvanised steel tubes light grade bore of pipe in mm 25 mm 10 RM
8 8 S&FGalvanised steel tubes light grade bore of pipe in mm 50 mm 10 RM
9 9 S&FGalvanised steel tubes light grade bore of pipe in mm 80 mm 6 RM
10 10 S&FGalvanised steel tubes light grade bore of pipe in mm 100 mm 10 RM
11 11 S&F MS pipe heavy grade with all fittings laid in all floors or fixed to walls and celings etc. of size 150 mm as specified and directed by Engr-in-charge. 2 RM
12 12 S&F in replacement of sluice valve CI body with steel spindle of size 80 mm bore including nuts/bolts and other material etc. all as specified. 2 Each
13 13 S&F in replacement of sluice valve CI body with steel spindle of size 100 mm bore including nuts/bolts and other material all as specified. 1 Each
14 14 S&F in replacement of GM/CI non return valve of size 80mm /100mm bore PN 1.6 all as specified. 1 Each
15 15 S&F 20 mm dia gate valve, gun metal, heavy duty screwed down both ends with iron wheel head after taking down old existing gate valve complete all as specified and directed at site. 1 Each
16 16 S&F 25 mm dia gun metal,gate valve heavy duty screwed down both ends with iron wheel head after taking down old existing gate valve complete all as specified and directed at site. 1 Each
17 17 S&F 50 mm dia gun metal, gate valve heavy duty screwed down both ends with iron wheel head after taking down old existing gate valve complete all as specified and directed at site. 1 Each
18 18 M&L for cleaning of RCC underground water sump of approx capacity 20000 Ltrs by removing the mud/settled bleaching powder and all other foreign material from the sump and depositing where directed but not less than 50 mtr from the starting point including scraping / removing all dirt/scales from the internal wall of the sump and washing the bottom surface and wall surface of the sump with clean water, draining out the dirty water so that the whole sump be thoroughly cleaned after pumping out all existing water by portable centrifugal/mono block submersible pump set, applying one coat of bleaching powder on the all inner wall surface of sump including bottom surface including two coats of white wash with superior quality of lime complete all as directed at site by Engr-in-charge .\n 1 Each Job
19 19 Labour for making of hider at pumphouse by making hole of 25 mm, 50 mm and 100 mm in MS pipe for connecting pipes of 25 mm, 50 mm and 100 mm by welding etc. painting the whole system by two coats of paints over coat of primer complete all as specified and directed. Note : Pipe of various sizes will be measured and paid separately under respective items. 1 Each Job
20 20 M&L, clean, dry, unwashed sand filled in trenches / ducts for cushioning to cable including punning complete all as specified. \nNote : The depth of sand cushion after punning shall be measured. 14.86 Cum
21 21 Supplying and laying un-reinforced pre cast concrete cable cover of class LV type1 flat size 250 mm x 150 mm x 40 mm fixed in replacement of any type bricks or PCC covers complete all as specified and directed. 261 Each
22 22 Supplying and laying un-reinforced pre cast concrete cable cover of classHV type1 flat size 300 mm x 180 mm x 40 mm fixed in replacement of any type bricks or PCC covers complete all as speicified and directed. 42 Each
23 23 Taking down carefully existing ordinary street light and post top lantern light etc to match with existing surfaces complete all as specified and directed. 4 Per \nPoint
24 24 Supply and fix LED street light 35 to 45 Watt with cast aluminium housing , toughened glass diffuser , IP65 /66 10 KV SPD ,> 100 lm/ watt , Model No.SZPSLMM036 or equivalent in shakti,Bajaj,Philips,wipro,syska and wired with accesorries complete all as speicified and directed. 2 Each
25 25 Supply and fix LED post top lantern, 15 watt, 230 V, with design reflector 7 diffuser for enhanced light outout dia 55 mm, Model : Shakti Fixtures Pvt Ltd model - SZPPPMX1015 or equivalent in Bajaj,Philips,wipro,syska complete all as specified and directed. 2 Each
26 26 Supply and replacement of unservicable tube rod of security light as specified and directed. 6 Each
27 27 Supply and replacement of unservicable bulb and post top lantern light etc as specified and directed. 6 Each
28 28 Supply and fix LED Driver for outdoor lighting luminarie complete all as specified. 20 Each
29 29 Supply and fix SMC box of 185x165x60 mm internal size hinged with door (L) with 1 No. PVC connector 4 way 16 amp including fixing bracket , nut & bolts etc complete all as specified and directed. 2 Each
30 30 Supply and fix of wiring for circuit/ submain wiring alongwith earthwire as two runs of 2.5 sqmm and one run of 1.5 sqmm earth wire sizes each of FRLS insulated copper conductor , single core cable in existing surface /recessed steel/PVC conduit/ steel tubular pole for street lights connection all as specified and directed. 30 RM
31 31 Supply, laying, jointing & testing in repair 10 sqmm 4 core XLPE insulated & PVC sheathed armoured LT cable, 1100 volts grade heavy duty with aluminium conductor laid in trenches/pipe/fixed on the wall etc .complete all as specified and directed. 30 RM
32 32 Supply, laying, jointing & testing in repair 10 sqmm 2 core XLPE insulated & PVC sheathed armoured LT cable, 1100 volts grade heavy duty with aluminium conductor laid in trenches/pipe/fixed on the wall etc .complete all as specified and directed. 30 RM
33 33 M & L for paint on HT/LT poles as specified and directed. 20 Each Job
34 34 Disconnecting & taking out of existing unserviceable control wire indicator, meters, fuses, selecter switches, contactor, timmer, CTs,etc of Main LT Panel,Feeder Piller, check, the serviceablity of parts / wiring and replacement of unserviceable control wire of suitable size single core, copper conductor confirming to IS – 694, taking out and replacement of unserviceable parts,cleaning the contacts of contactor, reassembling and testing of panel on full load after completion complete all as specified and directed. Note :- (i) The new items replaced by contractor will be paid under respective items as supply and fixing. (ii) However, replacement of minor parts such as nuts, bolts,washers, screws, gland, rubbers, gasket,etc will be included in quoted rates.\n 2 Each Job
35 35 Disconnecting & taking out of existing unserviceable control wire indicator, meters, fuses, selecter switches, contactor, timmer, CTs,etc DG Panel/AMF Panel/Starter panel/ Small LT panel, check, the serviceablity of parts / wiring and replacement of unserviceable control wire of suitable size single core, copper conductor confirming to IS – 694, taking out and replacement of unserviceable parts,cleaning the contacts of contactor, reassembling and testing of panel on full load after completion complete all as specified and directed. Note :-\n(i) The new items replaced by contractor will be paid under respective items as supply and fixing. (ii) However, replacement of minor parts such as nuts, bolts,washers, screws, gland, rubbers, gasket,etc will be included in quoted rates. 2 Each Job
36 36 Supply and fix of MCCB 4 pole of 63 amps to 100 amps , fixed type, with breaking capacity of 36 KA complete all as speicified and directed. 1 Each
37 37 Supply and fix of MCCB 4 pole of 100 amps to 125 amps , fixed type, with breaking capacity of 16 KA complete all as speicified and directed. 2 Each
38 38 Supply and fix of MCB SPN of 10 amps to 40 amps , breaking capacity 10 KA all as specified and directed. 2 Each
39 39 Supply and fix of MCB 4 pole of 40 amps to 63 amps , breaking capacity 16 KA all as specified and directed. 1 Each
40 40 Supply and fix of MCB SP of 06 amps to 40 amps , breaking capacity 10 KA all as specified and directed. 8 Each
41 41 Supply of control wiring/panel wire in LT panel with suitable size upto 1.5 sqmm FRLS PVC insulated copper conductor as specified and directed. 10 RM
42 42 Supply & fixing in repair Ammeter 0 – 400 Amps, 96 mm X 96mm, digital type suitable for 50Hz, 3 Phase, 415 Volts, AC supply complete all as specified and directed. 1 Each
43 43 Supply & fixing in repair Voltmeter 0 – 500 Volts, 96 mm x 96mm, digital type, suitable for 50Hz, 3 Phase, 415 Volts AC supply complete all as specified and directed. 1 Each
44 44 Supply & fixing in repair Energy meter 0 – 500 Volts,0-200 amp, 96 mm x 96mm, digital type, suitable for 50Hz, 3 Phase, 415 Volts AC supply complete all as specified and directed. 1 Each
45 45 Supply & fixing in repair Current transformer 3 Nos of CT of suitable size as per existing for 50Hz, 3 Phase, 415 Volts AC supply complete all as specified and directed. 3 Each
46 46 Supply & fixing in repair Rotary type 3 way ON/OFF rotary type selector switch suitable for 50Hz, 3 Phase, 415 Volts AC supply complete all as specified and directed. 2 Each
47 47 Supply and fix of 4 Pole Power Contactors - Type MNX, 32 amps, 415 volts,Conforms to IS / IEC 60947-4-1 & IEC 60947-4-1, Click fit type construction up to 40A, MNX / MCX Front Add-on aux. contact Block, complete all as specified and directed. 1 Each
48 48 Supply & fixing power capacitor 3 phase,10 KVAR, 440V, 50Hz,13.1 amps, heavy duty with leads complete all as specified and directed. 1 Each
49 49 Supply & fixing in repair Indicating lamps LED type, 230 volt for RYB including all necessary arrangments-01 set ( Set of three) all as specified and directed. 1 Each Set
50 50 Supply, laying, jointing and testing cable XLPE Insulated ,screened, PVC bedded,galvanized steel strip or wire armoured,electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following sizes.
51 50.01 95 sqmm x 3.5 core 20 RM
52 50.02 70 sqmm x 3.5 core 20 RM
53 50.03 50 sqmm x 3.5 core 20 RM
54 50.04 35 Sqmm X 3.5 core 20 RM
55 50.05 16 Sqmm X 4 core 20 RM
56 50.06 10 Sqmm X 4 core 45 RM
57 51 M&L for earthing complete with galvanized steel earth plate electrode size 600x600x6.3mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized iron strip 32X6 mm earth lead by means of bolts, nuts, check nuts and washers of galvanized steel including GI pipe light grade of size of 40 mm dia for protection and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate no.2 of SSR part 1 connected to earthing test point all as specified or indicated including testing on completion. 2 Each
58 52 M&L for earthing complete with galvanized steel pipe electrode,40 mm bore ,medium grade ,2.5 metres length, buired directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthinfg lead of 4mm dia galavanized iron or steel wire by means of bolts, nuts, check nuts and washers of GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate no.2 of SSR part 1 connected to earthing test point all as specified or indicated including testing on completion. 1 Each
59 53 Supply and fix of 32 x 6 mm galvanized iron strip for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit pipe to poles or any other indicated situation for loop earthing as required complete as specified and directed. 25 RM
60 54 Supply and fix of 4.00 mm dia GI Wire for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit pipe to poles or any other indicated situation for loop earthing as required complete as specified and directed. 10 RM
61 55 Filteration/dehydration of insulating oil of transformer in position, without disrupting power supply to achieve dieletric strength 50 KV or above (when tested with 2.5 mm gap electrode) complete all as directed. 100 Ltr
62 56 Supply and fix of Silica Gel breather with clear view type,aluminium top and bottom ,250 gram silica gel,pipe connection bsp thread 1/2'', dia and height of transparent tube as speicified and directed 1 Each
63 57 Inspection and Servicing of 11 KV, 200 Amps, gang operated air break switch, removing all jumpers cleaning the contact points making new jumpers with appropriate capacity including greasing/oiling for satisfactory operation complete all as specified and completed. 2 Each
64 58 M & L for preparation of old existing surface of steel tubular pole 11mtr long including cross arm etc of any description, in any position and applying two coats of high quality aluminium paint around pole and providing the high quality radium Numbering on pole including making white and black strips on pole with super enamelled paint complete all as specified and directed. 4 Each
65 59 Supply of Insulating gloves, 11KV, arc flash gloves, 50cal protection (Class 4),comply with the IEC 60903 and EN 60903 standards all as specified and directed. 1 Each
66 60 Material and labour spreading, leveling gravel of substation of all size including sand complete all as specified and directed. 10 Cum
67 61 Supply and fix of HT drop out fuse element for HT 11 KV complete all as specified 5 RM
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail