Military Engineer Services-MES has published Special Repair To Bldg No . Cantt-35 At Anjalee Complex At Shillong Cantt Including Certain Em Sanctioned Works At Shillong Under Ge Shillong. Submission Date for this Tender is 01-02-2021. Building Repair Tenders in GE SHILLONG. Meghalaya. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 21-Jan-2021 | Amendment in tender document | Other | 25-01-2021 |
2 | 25-Jan-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-02-2021 |
Name of Work: SPECIAL REPAIR TO BLDG NO. CANTT-35 AT ANJALEE COMPLEX AT SHILLONG CANTT UNDER GE SHILLONG. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Dismantling of plain or corrugated steel sheeting any guage thickness including Nainital or similar pattern roof covering complete all as specified and directed. | 400 | SQM | |
2 | 2 | Dismantling of wall/ceiling boards of any description (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and directed. | 25 | SQM | |
3 | 3 | Taking down Chowkhats or frames n.exc 1.5 Sqm each but with shutters (without taking off shutters from the frame) including builders hardware each complete all as specified and directed. | 6 | EACH | |
4 | 4 | Taking down Chowkhats or frames exc 1.5 Sqm but n.exc 4 Sqm each but with shutters (without taking off shutters from the frame) including builders hardware each complete all as specified and directed. | 4 | EACH | |
5 | 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete. | 70 | SQM | |
6 | 6 | Demolition of precast cement concrete block walling built in cement mortar etc complete all as specified and directed. | 7 | CUM | |
7 | 7 | Demolition and breaking up drain pipes 150mm dia (slat glazed ware AC or reinforced concrete/PVC pipe) set in Cement mortar complete all as specified and directed. | 140 | RM | |
8 | 8 | Dismantling boarding of any description and fixed any position with nails complete all as specified and directed. | 20 | SQM | |
9 | 9 | Dismantling of timber scantling 40 Sqcm and over in section in any position (unframed work) complete all as specified and directed. | 2 | CUM | |
10 | 10 | All as per item No 9.00 here in above but in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section complete all as specified and directed. | 50 | RM | |
11 | 11 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below/above ground level) complete all as specified and directed. | 4 | CUM | |
12 | 12 | M&L for Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed bed in cement sand mortar 1:4 etc complete all as specified and directed. | 2 | SQM | |
13 | 13 | M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete 1:3:6 type C1, using 20 mm graded stone aggregate, 10 Cm width and setting in cement mortar 1:6 complete all as specified and directed. | 70 | Sqm | |
14 | 14 | M&L for Non Skid coloured Ceramic tiles, joint free, 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including screed bed or bedding layer of mortar 15mm thick in cement sand mortar (1:6) for laying floor tiles complete all as specified and directed. | 12 | SQM | |
15 | 15 | M&L Glazed ceramic colour tiles of size 300 x 450 x 7mm/300x600x7 thick in vertical surfaces etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete all as specified and directed. | 70 | SQM | |
16 | 16 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. | 375 | SQM | |
17 | 17 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. | 25 | SQM | |
18 | 18 | M&L for 4mm thick designer E Board 600x600 mm pre-painted fibre boards ceiling designer / decorative type with different designs as approved , fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction etc complete all as specified and directed. | 25 | SQM | |
19 | 19 | S&F Aluminium frame work for snap grid false ceiling comprising of Aluminium perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 2mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and directed. | 25 | SQM | |
20 | 20 | M&L for 2nd class hard wood as in scantling, clean sawn, timber fixed complete all as specified and directed. | 2 | CUM | |
21 | 21 | S & F 2nd class hardwood boarding 40mm thick fixed with nails planed one side with butt joint complete all as specified and directed. | 20 | Sqm | |
22 | 22 | M&L 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed. | 0.2 | CUM | |
23 | 23 | M&L 2nd class hard wood plain fillets square rectangular or triangular in section clean sawn secured with nails or brads sectional area exc 13 sqm n exc 25 sqcm complete all as specified and directed. | 60 | Rm | |
24 | 24 | S&F Prelaminated particle board of 18/19 mm thick board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work complete all as specified and as directed. | 2 | SQM | |
25 | 25 | S&F 40 mm width of flaps when open Continuous (piano) hinges,mild steel, bright finish or electro galvanised etc complete all as specified and directed. | 6 | RM | |
26 | 26 | S&F magnet catcher and connected plate fixed to shutter and frame etc complete all as specified and directed. | 8 | EACH | |
27 | 27 | S&F Extruded brass handles of size 100mm, ISI marked complete all as specified and directed. | 8 | Each | |
28 | 28 | S&F hasp and staple 100mm safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.. | 4 | Each | |
29 | 29 | S&F 30 mm thick Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and directed. | 8 | SQM | |
30 | 30 | S&F 30 mm thick, factory made 2nd class hard wood, glazed and skeleton shutter, , open rebated and prepared to receive glass or gauge with sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (b) etc complete all as specified and directed. | 3 | SQM | |
31 | 31 | S&F 300 mm long, Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded\nsections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed | 3 | EACH | |
32 | 32 | S&F Extruded Aluminium, anodised, bow handles of size 150mm, ISI marked complete all as specified and directed. | 12 | Each | |
33 | 33 | S&F aluminium anodised barrel bolts and fixed of 200 mm length, ISI marked complete all as specified and directed. | 12 | Each | |
34 | 34 | S & F 100 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed. Make:- Classic,Sandhu or equivalent. | 4 | EACH | |
35 | 35 | S&F 150mm long Mild steel Helical door spring welded to steel/Fixed to wooden door frame including roller and roller plate,complete all as specified and directed.. | 2 | Each | |
36 | 36 | S&F Mild Steel Butt hinges, medium weight, cold rolled, 100 mm size ISI Marked complete all as specified and directed. | 24 | EACH | |
37 | 37 | Hacking out old broken glass (any thickness size quality or description) from wooden pane glazed with putty or fixed with wooden bends complete all as specified and directed. | 5 | SQM | |
38 | 38 | S&F Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.50 Sqm in each pane including hacking out old broken glass complete all as specified and as directed.\n | 1 | SQM | |
39 | 39 | S&F 3mm thick glass one side frosted , glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane including fixed with wooden beads / glazing pins or spring clips in wooden or metal frames complete all as specified and directed. | 1 | SQM | |
40 | 40 | M&L for Synthetic enamel paint two coats over a coat of pink primer on new or previously untreated wooden surfaces over 10 Cm width or girth including necessary preparation of wooden surfaces complete all as specified and as directed. | 24 | SQM | |
41 | 41 | S&F 110 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joint fixed to walls/laid in trenches or in floors including clamps for securing pipe complete all as specified and directed.Make:- Prince / supreme. | 60 | RM | |
42 | 42 | S&F PVC gutter , half round, 180mm size complete all as specified and directed. | 40 | RM | |
43 | 43 | S&F End cup support brackets for PVC pipes (half round) complete all as specified and directed. | 4 | Each | |
44 | 44 | S&F PVC Tee, 180mm complete all as specified and directed. | 6 | Each | |
45 | 45 | S&F PVC Reducer, 180mmx110mm complete all as specified and directed. | 4 | Each | |
46 | 46 | S&F 75 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joint fixed to walls/laid in trenches or in floors including clamps for securing pipe complete all as specified and directed.Make:- Prince / supreme. | 30 | RM | |
47 | 47 | S&F PVC (SWR) floor trap, plain with gratting including jointing with solvent cement suitable for 75mm dia of outlet complete all as specified and as directed . | 2 | EACH | |
48 | 48 | S&F 110mm bore PVC (SWR) bends /door bend of any radius with cement solvent, cement joints, complete all as specified and as directed. | 27 | EACH | |
49 | 49 | S&F 75mm bore PVC (SWR) bends /door bend of any radius with cement solvent, cement joints, complete all as specified and as directed. | 8 | EACH | |
50 | 50 | M&L 75mm thick PCC, type C2, (1:3:6, using 40 mm graded stone aggregates) as in floor, hardstanding and plinth protection and finishing the cement concrete surfaces even and smooth without using extra cement complete all as specified and as directed. | 60 | SQM | |
51 | 51 | S&F rotational moulded polyethylene 1000 ltrs capacity water storage tanks , three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end including taking down old unserviceable tank complete all as specified and directed. | 1 | EACH | |
52 | 52 | Taking down GI tubing 15mm dia and connection including removing to store complete all as specified and directed. | 50 | RM | |
53 | 53 | Taking down GI tubing 20mm dia and connection including removing to store complete all as specified and directed. | 50 | RM | |
54 | 54 | S&F GI tubing 15 mm dia medium grade with all GI fittings fixed in wall, ceiling or floor with necessary GI clamp or hook complete all as specified and as directed. | 50 | RM | |
55 | 55 | S&F GI tubing 20 mm dia medium grade with all Gi fittings fixed in wall, ceiling or floor with necessary GI clamp or hook complete all as specified and as directed. | 50 | RM | |
56 | 56 | Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth etc complete all as specified and as directed. | 20 | RM | |
57 | 57 | S&F in repair vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including white plastic water closet seat cover closed pattern with flat bottom and cover with PVC hinge device, fixing bolt for pedestal pattern complete all as specfied and directed. Make:- Prayag / Cera / Hindware. | 2 | EACH | |
58 | 58 | S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge .Make:- Prayag / Pearl/ Hindware. | 2 | EACH | |
59 | 59 | S&F in repair Vitreous china wash basin pedestal pattern, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets also including brass chromium plated waste coupling 32mm dia,PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed by Engineer-in-Charge .Make:- Prayag / Pearl/ Hindware. | 2 | EACH | |
60 | 60 | S&F in repair PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed. | 14 | EACH | |
61 | 61 | S&F in repairs CP Bib tap 15 mm bore, fancy type, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed . | 5 | EACH | |
62 | 62 | S&F in repairs CP Stop cock ,15 mm bore, fancy type, chromium plated, with crutch or butterfly handle, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. | 2 | Each | |
63 | 63 | S&F in repairs stop valve 20 mm bore, cast copper alloy , with crutch or butterfly handle, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. | 2 | Each | |
64 | 64 | S&F in repairs CP angular Stop cock ,15 mm bore, fancy type with round headed knob, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. | 14 | Each | |
65 | 65 | S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower complete all as specified and directed. Make Jaquar cat part No:OPP-15125PM or equivalent model from Make : Prayag | 2 | Each | |
66 | 66 | S&F in repair 15 mm bore brass CP center hole basin mixer for mixing hot and cold water ,fancy type etc complete all as specified and directed. Make : Jaquar cat part No. CON-169KNB or equivalent model of Make:Prayag | 2 | Each | |
67 | 67 | S&F in repair 15 mm bore CP health Faucet cock with Flexible pipe 1 m long complete all as specified and directed.Make Jaguar Cat Part No:ALD-CHR-593N or equivalent model from Make: Prayag | 2 | Each | |
68 | 68 | S&F in repair corner glass shelf size chromium plated holder, brackets fixed to wall complete all as specified and directed. Make: Jaquar Cat Part No-ACN-1173 or equivalent model of Make:Prayag | 6 | Each | |
69 | 69 | S&F in repair CP towel Rail 600 mm long , fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed by Engineer-in-Charge . | 2 | EACH | |
70 | 70 | S&F in repair Bevelled edge mirror, of thickness 5mm of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge .Make:Jaquar Cat Part No ACN 1193No or equivalent model from make : Prayag | 2 | Sqm | |
71 | 71 | S&F in repair CP towel ringsquare or round complete all as specified and as directed by Engineer-in-Charge .Make:Jaquar Cat Part No - ACN 1151 N or equivalent model from make : Prayag | 2 | Each | |
72 | 72 | S&F in repair chromium plated Soap dish holder withstainless screws, fixed on wall etc complete all as specified and as directed by Engineer-in-Charge .Make:Jaquar Cat Part No - ACN 1131 N or equivalent model from make : Prayag | 2 | EACH | |
73 | 73 | S&F in repair CP toilet paper holder complete all as specified and as directed by Engineer-in-Charge .Make:Jaquar Cat Part No - ACN 1151 N or equivalent model from make : Prayag | 2 | Each | |
74 | 74 | S&F in repair hand shower 27X27mm square shape single flow (ABS Body & face plate chrome plated) with rabit cleaning system Cat Part No HSH 35537 (Make:- Jaquar) with easy flex tube in chrome finish 1.5m long with nuts Cat Part No SHA 571(Make Jaquar) or equivalent in Marc/Parryware/Prayag. | 2 | Each | |
75 | 75 | S&F in repair CP overhead shower dia 150 mm round shape single flow (ABS Body & face plate stainless steel with chrome plated) with rabit cleaning system Cat Part No OHS-CHR-1603 (Make:- Jaquar) with shower arm 400x25x25 mm square shape for wall mpounted showers with flange Cat Part No SHA-455L600(Make Jaquar) or equivalent in Marc/Parryware/Prayag. | 2 | Each | |
76 | 76 | S&F in repair sinks made of stainless steel 1mm thick in kitchen or laboratory with plugs washers and wastes incl bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 495x420 mm bowl size 410mmx330mmx160 mm complete all as specified and as directed by Engineer-in-Charge..Make: Prayag/Anjali/Blue star | 1 | Each | |
77 | 77 | S&F Stainless steel kitchen plate rack of size 600x750x250mm made out of stainless steel sheet of 0.63 mm with all accessories including taking down old unservicable rack complete all as specified and as directed by Engineer-in-Charge.Make : Blue star/ Prayag/Anjali | 1 | Each | |
78 | 78 | S & F in repairs 25mm dia aluminium drapery rod with wooden finish decorative, including brackets, decorative finials at both ends and curtain rings 8 Nos (minimum) in one opening complete all as specified and as directed. | 100 | RM | |
79 | 79 | Demolition of reed, lathing, single or double, including battens and\nplaster or chicken wire lathing complete all as specified and as directed by Engineer-in-Charge. | 10 | Sqm | |
80 | 80 | Taking down plastering on lathing (other than wire-netting), without\nremoving lathing, in lime mortar (one side only measured in cases where both sides are plastered) complete all as specified and as directed by Engineer-in-Charge. | 40 | Sqm | |
81 | 81 | M&L for Rendering 15 mm thick in cement sand mortar (1:6) on fair faces of concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge. | 50 | SQM | |
82 | 82 | M&L for Rendering, 15 mm thick plaster in cement sand mortar ( 1:4), in two layers, top 5 mm thick with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a coat of 10 mm thick base coat complete all as specified and as directed by Engineer-in-Charge.\nNote WPC shall be measured and paid separately. | 50 | SQM | |
83 | 83 | Supply only integral water proofing compound, ISI marked complete all as specified and as directed by Engineer-in-Charge. | 6 | KG | |
84 | 84 | S & F of Wire netting of galvanised steel wire 0.71 mm dia and 25 mm aperature fixed with tinned tacks of wire staples complete all as specified and as directed by Engineer-in-Charge. | 10 | Sqm | |
85 | 85 | M&L for weather coat (exterior emulsion) two coats over a coat of wall primer including preparation of newly plastered surface of wall complete all as specified and as directed by Engineer-in-Charge. | 50 | SQM | |
86 | 86 | M&L for weather coat (exterior emulsion) two coats over a coat of alkali resistant primer on external surfaces including complete removal of existing treatment of walls, preparing the surfaces even & smooth by rubbing with wire brush or sand paper complete all as specified and as directed by Engineer-in-Charge. | 180 | SQM | |
87 | 87 | M&L for preparation of newly or previously undecorated plastered surface and applying oil bound distemper two coats over one coat of wall primer over and including 3mm thick wall care putty complete all as specified and as directed by Engineer-in-Charge. | 50 | SQM | |
88 | 88 | M&L for complete removal of existing treatment of walls, preparing the surfaces even & smooth by rubbing with wire brush or sand paper and applying two coats of oil bound distemper over one coat of wall primer complete all as specified and as directed by Engineer-in-Charge. | 485 | SQM | |
89 | 89 | M&L for complete removal of existing treatment of ceilings,including cornics etc preparing the surfaces even & smooth by rubbing with wire brush or sand paper and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed by Engineer-in-Charge. | 205 | SQM | |
90 | 90 | M&L for Synthetic enamel paint one coat over a coat of pink primer on old wooden surfaces over 10 Cm width or girth including necessary preparation of wooden surfaces complete all as specified and as directed by Engineer-in-Charge. | 470 | SQM | |
91 | 91 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, lamp holders, regulators, switch, socket outlets, bell push, ceiling rose etc , removing material to store for keeping in safe custody for reuse at site and making good to disturbed surfaces of walls with cement sand mortar (1:6) and white/colour wash to match with existing surfaces etc complete all as directed. | 83 | PER POINT | |
92 | 92 | M&L Point wiring with single runs PVC insulated FRLSH grade, 1100V grade cable with multistranded copper conductor of size 1.5 Sqmm (Nominal area) (ISI Marked) drawn in and including PVC Casing capping of suitable size with all fittings and accessories including PVC rectangular board of suitable size and drawing continuous earth wire of PVC insulated FRLSH grade, unsheathed stranded copper conductor of size 1.5 Sqmm (ISI Marked) as continuous earth wire terminated in and including sunken box for following type of point wiring including making good disturbed of wall complete all as specified in SSR Part-I, 2009 and Part-II, 2010 and as directed by Engineer-in- Charge for one light point / one fan point etc on independent board controlled by one one way switch etc complete all as specified and as directed.\n\n \n | 146 | PER POINT | |
93 | 93 | All as per item No 92.00 above but for one 2/3 pin socket outlet 5/6 Amps point on independent board etc complete all as specified and directed. | 30 | PER POINT | |
94 | 94 | All as per item No 92.00 above but for one 2/3 pin socket outlet 5/6 Amps point on same board etc complete all as specified and directed. | 10 | PER POINT | |
95 | 95 | All as per Item No. 92.00 here-in-before but with FRLSH grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 4.0 Sqmm for one power point of 3 pin 15 Amps on independent board including FRLSH grade (ISI mark), PVC insulated, unsheathed one run multi-stranded copper conductor of size 4.0 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. | 19 | PER POINT | |
96 | 96 | Supply and fix, Switch piano (ISI marked) Single pole 240 volts, flush type, one way 5 Amps complete all as specified and directed. | 146 | EACH | |
97 | 97 | Supply and fix Switch socket combination (ISI marked), 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. | 40 | EACH | |
98 | 98 | Supply and fix Switch socket combination (ISI marked), 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and as directed. | 29 | EACH | |
99 | 99 | S&F Ceiling rose, surface backlite 65x50mm 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed. | 125 | Each | |
100 | 100 | Supply and fixing in repair LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size etc complete all as specified and as directed. Make Havells cat part No-LHEXACP7PN1W018 or Philips Cat Part No-DX18UJJWAL or Crompton Cat Part No-LCTL 18 CDL. | 25 | EACH | |
101 | 101 | S & F in repair wall mounted LED batten fittings with all accessories 1X 9 Watt LED 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed .Make Crompton Cat part No-LCTL 9 CDL or equivalent make of Philips/Havells. | 4 | EACH | |
102 | 102 | Supply and fix in repair slim design LED 12 Watt recessed square type down lighter, flat panel PDC aluminium housing and PMMA diffuser complete all as specified and directed. . Make: Crompton Cat Part No-LCCLBO8-CDL or equivalent model of Make : Havells/Bajaj/Philips | 2 | EACH | |
103 | 103 | S&F in repair Wall bracket decorative LED Light fitting with lamp 12 Watt complete with necessary connection etc complete all as specified and as directed. Make : Philips Cat part No- 32032 or equivalent model from make: Havells /Bajaj. | 10 | EACH | |
104 | 104 | S&F in repair spot light LED Light fitting with lamp E14 base LED 3 Watt complete with necessary connection etc complete all as specified and as directed. Make : Philips Cat part No- 52160/17 FCG310 or equivalent model from make: Havells /Bajaj. | 2 | EACH | |
105 | 105 | S&F lamp holder, insulated body, with back plate for batten fitting complete all as specified and as directed. | 4 | Each | |
106 | 106 | Supply and fix in repair MCCB DB 4 way vertical sheet metal enclosure TPN 415 Volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting with one MCCB 100 AMps 4 Pole 25 KA as incommer complete all as specified and directed . Make:- Legrand / Schneider/L&T/Havells \nNote: Copper thimble shall be used for connection of cable. | 1 | EACH | |
107 | 107 | Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with necessary electrical connection complete all as specified and directed . Make:- Legrand / Schneider /Havells/L&T | 4 | EACH | |
108 | 108 | Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 08 ways , fixed on wall duly grouted in solid block wall or on wooden board with necessary electrical connection complete all as specified and directed . Make:- Legrand / Schneider /Havells/L&T | 2 | EACH | |
109 | 109 | Supply and fix MCCB four pole , 415 Volt, 100 Amps ,16 KA , fixed thermal & magnetic setting complete all as specified and directed . Make:- Legrand / Schneider /Havells/L&T | 6 | EACH | |
110 | 110 | Supply & fixing in repair Exhaust fan 230 volts , 250 mm plastic body with louver , ventilator DX including making necessary cutting hole ( circular / rectangular) and grouting in wall 4 nos GI bolts to hold fan and making good to disturbed surfaces with cement sand mortar ( 1:4) with necessary colour wash / distemper to match with existing shade of wall including necessary electric connection and testing etc complete all as specified and as directed. Make:- Havells / orient / Bajaj / CG. Note:- Old unserviceable Exhaust fan obtained after taking down shall be deposited to MES store and entered in credit ledger and copy of the same shall be produced with any claim due to the contractor. | 3 | EACH | |
111 | 111 | S & F in repairs LED security building light LED 25 Watt, pressure die cast aluminium housing, heat resitant glass, IP65 protection, better optics for uniform distribution complete with all accessories internally prewired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and directed. Make Bajaj Cat Part No-169821 LED/CG or equivalent model from make : Surya/Havells | 4 | EACH | |
112 | 112 | Supply and fix isolator MCB DP, 240 Volt, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed .Make:- Havells cat part no.DHMCCDPF006-32 or equivalent model from make:- Schneider / Siemens / Legrand / L&T . | 11 | EACH | |
113 | 113 | Supply and fix in repair Isolator MCB SP, 240 Volt, 6-40 Amps fixed in DB's complete all as specified and directed .Make:- Schneider cat part no.A9N4P32C or Indo asian Cat Part No-81195or Hager cat part No.NCN106N | 62 | EACH | |
114 | 114 | Supply and fix and testing of storage type , electrically driven ,ISI Marked, water heater (Geyser) of capacity 25 litres, vertical type, wall mounted, BEE 5 star rating , AC, single phase including necessary fixing arrangements , electric and water connection complete all as specified and as directed. Make:- Havells Cat part no. GHWAPXTWB025 or equivalent make in Racold / Bajaj . | 2 | EACH | |
115 | 115 | S&F PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed. | 4 | EACH | |
116 | 116 | S&F CP Bib tap 15 mm bore, fancy type, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed . | 4 | EACH | |
117 | 117 | S&F CP angular Stop cock ,15 mm bore, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. | 2 | Each | |
118 | 118 | Supply & fix in repair static electric energy meter (KWH) of accuracy class 1.0 AC Thrree phase, 3X 240 volts, 50 Hz of rating 10A-60A counter type LCD display with transparent hinge type box fixed on wooden / PVC board complete e all as specified & directed by Engr-in-Charge. Make : HPL / L&T / Legrand. Note:- Old unserviceable meter shall be removed from site and deposited to the MES store by the contactor. | 1 | EACH | |
119 | 119 | Material and labour for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- Finolex/RR kabel/Havells/KEI, PVC Casing Capping- Presto plast/Finolex/Kalinga. | 198 | RM | |
120 | 120 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I including taking down old unserviceable one etc complete all as specified and as directed. | 2 | Each Job | |
121 | 121 | Supply & fix three phase static energy meter temperproof of accuracy class 1.0 AC, 240 volts, 50 Hz with backlit LCD display of rating 10A-60A,(measures and displays KwH,V,current,I,Kw,pf last month history of KwH,MD in KW) with special features like TOD,temper logging,optical communication port display in absence of power with transparent hinge type box fixed on wooden / PVC board complete e all as specified & directed by Engr-in-Charge. Make : HPL / L&T / Legrand. | 3 | EACH | |
122 | 122 | Material and labour for sub main wiring with two run single core 4.0 sqmm ZHFR, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed ZHFR , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC surface conduit medium grade ISI marked of suitable size with all accessories such as Tees,elbows,junction boxes etc complete all as specified and directed.(Note: two run of 4.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC conduit shall be measured as one length).Make- Cable- Finolex/RR kabel/Havells/KEI, PVC Conduit- Presto plast/Finolex/Kalinga. | 69 | RM | |
123 | 123 | Supply & fix single phase static energy meter temperproof of accuracy class 1.0 AC, 240 volts, 50 Hz with backlit LCD display of rating 5A-60A,(measures and displays KwH,V,current,I,Kw,pf last month history of KwH,MD in KW) with special features like TOD,temper logging,optical communication port display in absence of power with transparent hinge type box fixed on wooden / PVC board complete e all as specified & directed by Engr-in-Charge. Make : L&T cat part No WM101BC7DDH/HPL Cat Part No.SPPB1321120002ME03 or equivalent make of Legrand. | 2 | Each | |
124 | 124 | Supply, laying XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground cable with stranded aluminum conductor 1100 volt grade of size 16 Sqmm 4.0 Core, confirming to IS, laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. Notes:\n(i) Excavation & necessary earth work shall be measured and paid separately. | 786 | RM | |
125 | 125 | Excavation in trenches n exc 1.5 mtr wide and depth n exc 1.5 mtr deep for foundation, etc n exc 10 sqmtr on plan, in soft/loose soil and getting out complete all as specified and directed. | 57 | CUM | |
126 | 126 | Excavation in trenches n exc 1.5 mtr wide and depth n exc 1.5 mtr deep for foundation, etc n exc 10 sqmtr on plan, in hard/dense soil and getting out complete all as specified and directed. | 202 | CUM | |
127 | 127 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick as in hard/dense soil etc complete all as specified and as directed. | 121 | CUM | |
128 | 128 | Removing excavated materials (soil) n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed. | 138 | CUM | |
129 | 129 | M&L for Sand cushioning with dry clean river sand for protection/covering of under ground cable in trenches complete all as specified and directed by Engr-in-Charge. \nNote:- Punned thickness only shall be measured for payment. | 95 | CUM | |
130 | 130 | Supply and laying Sub class 'B' well burnt brick, laid flat in trenches as protection to LT XLPE cable complete all as specified and as directed. | 10.17 | PER 1000 nos | |
131 | 131 | Supply and fix MCCB DB 4 way sheet metal enclosure TPN 415 Volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting with one MCCB 100 AMps 4 Pole 25 KA as incommer complete all as specified and directed . Make:- Legrand / Schneider /L&T/Havells\nNote: MCB SP/TPN shall be measured and paid separately.Copper thimble shall be used for connection of cable. | 2 | EACH | |
132 | 132 | Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 04 ways , fixed on wall duly grouted in solid block wall or on wooden board with necessary electrical connection complete all as specified and directed . Make:- Legrand / Schneider /Havells/L&T | 1 | EACH | |
133 | 133 | Supply and fix Isolator MCB SP, 240 Volt, 6-40 Amps fixed in DB's complete all as specified and directed .Make:- Schneider cat part no.A9N4P32C or Indo asian Cat Part No-81195or Hager cat part No.NCN106N | 60 | EACH | |
134 | 134 | M&L for electrical Earthing complete with GI plate electrode of size 60 Cm X 60 Cm X 6.3 mm thick burried directly in ground vertically at a depth not less than 2.25 mtr. below normal ground level, with top edge of earth plate at a depth not less than 1.5 mtr. below normal ground level , connected to Aluminium strip of size 25mm x 3mm earth lead by means of bolts, nuts and washers of galvanised iron , earth lead strip protected by means of 32 mm bore dia light grade GI pipe up to switch board / panel board , all as specified and shown in MES schedule Electrical Plate No:-5 of SSR Part I, including excavation and earth work in any type of soil , PCC 1 : 2 : 4 type C1 in chamber , RCC 1:2:4 type C1 40 mmthick cover slab with 6 mm dia MS bars at 100 mm centre to centre both ways,with 6 mm dia MS hook, Charcoal dust, salt , funnel for watering complete and testing the Earth resistence and writing same on the chamber with synthetic enamel paint all as specified and as directed. | 2 | EACH | |
135 | 135 | M&L for electrical Earthing complete with GI plate electrode of size 60 Cm X 60 Cm X 6.3 mm thick burried directly in ground vertically at a depth not less than 2.25 mtr. below normal ground level, with top edge of earth plate at a depth not less than 1.5 mtr. below normal ground level , connected to GI earth strip 32mm x 6mm earth lead by means of bolts, nuts and washers of galvanised iron , earth lead strip protected by means of 32 mm bore dia light grade GI pipe up to switch board / panel board , all as specified and shown in MES schedule Electrical Plate No:-5 of SSR Part I, including excavation and earth work in any type of soil , PCC 1 : 2 : 4 type C1 in chamber , RCC 1:2:4 type C1 40 mmthick cover slab with 6 mm dia MS bars at 100 mm centre to centre both ways,with 6 mm dia MS hook, Charcoal dust, salt , funnel for watering complete and testing the Earth resistence and writing same on the chamber with synthetic enamel paint all as specified and as directed. | 8 | EACH | |
136 | 136 | Supply and erecting steel tubular swaged pole 8.5 mtr long type 410 SP-22 confirming to IS-2713(Part-I&II) complete with cast iron base plate and final taper plug duly painted with anti corrosive paint internally and externally and upto 1.5 m length of pole above ground level (externally) shall be painted with two coats of synthetic enamel paint in strips of 30 Cm length, black and yellow alternatively and balance of pole with two coats of aluminium paint including numbering of poles etc complete all as specified and as directed by Engr-in-Charge. Make:- Bansal / M/s Calcutta poles ltd/Nezone | 14 | EACH | |
137 | 137 | S & F LED street light LED 45 Watt, pressure die cast aluminium housing, heat resitant glass, IP65 protection, better optics for uniform distribution complete with all accessories internally prewired and including connecting up with three core 2.5 sqmm flexible copper conductor cable from junction box to security light complete all as specified and directed. Make Crompton greaves LSTP45CDL or equivalent model from make : Surya/Havells/Bajaj/Eveready | 31 | EACH | |
138 | 138 | Supply & fixing factory made IP-65 (Dust and power jet proof according to IEC60529) transparent street light junction box of size 340mmx160mmx90mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant , fire retardant ,having high impact totally insulated, UV resistant ) having high grade gasket made of polyurethane inculding one nos MCB SP 6 Amps for control street light with two cable gland for cable size 10/16 sqmm etc and fixing on pole with MS flat iron of size 20X3mm with necessary nut & bolts complete all as specified and directed Make:Hensel /Sintex | 23 | EACH | |
139 | 139 | M&L for PVC Cable of Three core 2.5 Sq.mm size PVC insulated , un sheathed , multi stranded copper conductor cables in 20 mm PVC conduit including clamp, nut botls and connecting up to street light fitting . | 230 | RM | |
140 | 140 | Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size etc complete all as specified and as directed. Make Havells cat part No-LHEXACP7PN1W018 or Philips Cat Part No-DX18UJJWAL or Crompton Cat Part No-LCTL 18 CDL. | 8 | EACH | |
141 | 141 | Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 08 ways , fixed on wall duly grouted in solid block wall or on wooden board with necessary electrical connection complete all as specified and directed . Make:- Legrand / Schneider /Havells/L&T | 2 | EACH | |
142 | 142 | Supply and fixing Flexible cable 10 Sqmm Weather proof single flat twin core cable complete all as specified and directed | 500 | RM | |
143 | 143 | Supply and fixing LED Flood light 100 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from junction box to connector of light including suitable size bracket complete all as specified and directed.. | 4 | EACH | |
144 | 144 | Supply and laying GI tubing light grade,25 mm bore with all GI fittings, fixed complete to walls and ceiling or laid in floor for cable crossing complete all as specified and as directed | 10 | RM | |
145 | 145 | S&F LED street light fitting 1X60W LED street light including LED lamp in Aluminium PDC housing,toughened glass cover with IP-66 protection compplete all as specified and directed by Engr-In-Charge.Make:Crompton Cat Part No LSTP-60_CDL-M or equivalent in Havells/Philips. | 2 | EACH | |
146 | 146 | M&L for street light bracket made out of light grade GI steel tube 32 mm dia 1.5m long length and bend at 120 degree to shape for fixing LED street light fitting complete all inclusive all necessary fixing arrangements such as clamps,nuts,bolts etc painted with two coats of synthetic enameeled paint over a coat of red oxide on steel surfaces all as specified and directed by Engr-in-Charge. | 12 | EACH | |
147 | 147 | Supply & fixing factory made IP-66 (Dust and power jet proof according to IEC60529) opaque street light junction box of size 240mmx130mmx95mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant , fire retardant having high impact(IK 08) totally insulated made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper terminal inculding one nos MCB SP 6 Amps rating 10kA with locking arrangement suitable for control street light with two cable gland for cable size 10/16 sqmm etc and fixing on pole with MS flat iron of size 20X3mm with necessary nut & bolts complete all as specified and directed Make:Hensel /Sintex/Bentex | 2 | EACH | |
148 | 148 | Supply & fixing Exhaust fan 230 volts , 250 mm plastic body with louver , ventilator DX including making necessary cutting hole ( circular / rectangular) and grouting in wall 4 nos GI bolts to hold fan and making good to disturbed surfaces with cement sand mortar ( 1:4) with necessary colour wash / distemper to match with existing shade of wall including necessary electric connection and testing etc complete all as specified and as directed. Make:- Havells / orient / Bajaj / CG. | 55 | EACH | |
149 | 149 | Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 08 ways , fixed on wall duly grouted in solid block wall or on wooden board with necessary electrical connection complete all as specified and directed . Make:- Legrand / Schneider /Havells/L&T | 3 | EACH | |
150 | 150 | Material and labour for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including concealed on wall / ceiling in PVC casing capping of 20 mm dia etc complete all as specified and directed, .(Note: two run of 4.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC casing capping 20 mm shall be measured as one length).Note (All chases will be cut by chase cutter machine only)\n .Make of cable:- KEI / RR Kabel / Havells . PVC Casing & Capping:- Prestoplast / Finolex / Kalinga | 60 | RM | |
151 | 151 | Supply and laying GI tubing light grade under road,50 mm bore with all GI fittings, fixed complete to walls and ceiling or laid in floor for cable crossing complete all as specified and as directed | 20 | RM | |
152 | 152 | Supply and laying GI tubing light grade under road,80 mm bore with all GI fittings, fixed complete to walls and ceiling or laid in floor for cable crossing complete all as specified and as directed | 25 | RM | |
153 | 153 | Supply, laying XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground cable with stranded aluminum conductor 1100 volt grade of size 25 Sqmm 4.0 Core, confirming to IS, laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. Notes:\n(i) Excavation & necessary earth work shall be measured and paid separately. | 250 | RM | |
154 | 154 | Supply, laying XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground cable with stranded aluminum conductor 1100 volt grade of size 10 Sqmm 2.0 Core, confirming to IS, laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. Notes:\n(i) Excavation & necessary earth work shall be measured and paid separately. | 500 | RM | |
155 | 155 | Supply, laying XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground cable with stranded aluminum conductor 1100 volt grade of size 16 Sqmm 2.0 Core, confirming to IS, laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. Notes:\n(i) Excavation & necessary earth work shall be measured and paid separately. | 200 | RM | |
156 | 156 | Supply, laying XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground cable with stranded aluminum conductor 1100 volt grade of size 120 Sqmm 3.5 Core, confirming to IS, laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. Notes:\n(i) Excavation & necessary earth work shall be measured and paid separately. | 50 | RM | |
157 | 157 | Supply, laying XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground cable with stranded aluminum conductor 1100 volt grade of size 70 Sqmm 3.5 Core, confirming to IS, laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. Notes:\n(i) Excavation & necessary earth work shall be measured and paid separately. | 200 | RM | |
158 | 158 | Supply & fixing factory made IP-65 (Dust and power jet proof according to IEC60529) opaque street light junction box of size 260mmx210mmx116mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant , fire retardant having high impact(IK 08) totally insulated made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper terminal inculding one nos MCB SP 6 Amps rating 10kA with locking arrangement suitable for control street light with two numbers M40 size gland and one M32 size gland suitable for cable size upto 35 sqmm etc and fixing on pole with MS flat iron of size 20X3mm with necessary nut & bolts complete all as specified and directed Make:Hensel Cat No KJ-8350 or equivalent of Sintex/Bentex | 20 | EACH | |
159 | 159 | S & F LED Building security light LED 25 watt including connection with three core cable 1.5 Sqmm complete all as specified and directed. Make:- baja Cat Part No.-BRLEP 25W LED WH or Havells cat part No ENDURACITYLITE 25W or equivalent in Philips. | 10 | EACH | |
160 | 160 | Supply and fixing LED Flood light 80 Watt, 230 Volts pressure die cast aluminum housing, heat resistant glass, IP66 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable with clamps and fixing arrangement complete all as specified and directed.. | 8 | EACH | |
161 | 161 | Supply and fixing LED Post Top lantern suitable for 1X40 Watt LED post top made incast Aluminium SPigot housing with decorative opal polycarbonate diffuder and IP 65 protection including all accessories.Make bajaj cat Part No BGCL 40W LED WH or equivalent in Philips/CG. | 6 | EACH | |
162 | 162 | Supply and fix three single core multi stranded copper cable of size 1.5 Sqmm FRLSH for phase neutral and earth continuity conductor drawn through steel tubular pole with both side connection street light junction box inclusive copper terminals complete all as specified and directed. | 150 | RM | |
163 | 163 | Supply and fix integral decorative LED Bollard Lights 9 Watt with lamp including connection with three core flexible copper cable complete all as specified and directed Make:- Bajaj Cat Part No BGBOL 650 9W or equivalent make of Havells / Philips / Wipro | 30 | EACH | |
164 | 164 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as specified and as directed. | 1 | Each Job | |
165 | 165 | M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundations,fillings and mass concrete complete all as specified and directed. | 3 | CUM | |
166 | 166 | M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping of poles including necessary formwork concrete complete all as specified and directed. | 0.3 | CUM | |
167 | 167 | Supply, install , testing and commissioning of outdoor LT distribution feeder pillar IP-65 , CPRI approved of size 1.5mX1.2mX0.6m factory made, dust and vermin proof , double leaf shutter in front and single leaf shutter in rear made out of 3.15 mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly painted with powder coated paint and aluminium bus bar 400 amps, 415 volts, 50 Hz 3 phase and 4 wire system with the following items connected as under including supplying and fixing on MS channel 75mmx40mmx5mm in PCC foundation and PCC work around the panel board within two fit area:- INCOMING (a) MCCB 4 pole 250 Amps, 35 KA-01 No (b) On load change over switch disconnector of 250 Amps Cap-01No (c) Phase indicator Lamps (RYB phases)-01 Set (Set of Three) LED Cluster type (d) Digital Voltmeter 0-500Volts with selector switch,3 phase,415 Volts AC supply-01 Nos (e) Digital Ammeter with selector switch, 3 phase, 415 Volts AC supply-01 Nos (f) Digital current frequency meter with selector switch, 3 phase,415 volts AC supply-01 Nos (g) Neon Lamp LED type-03 Nos (h) Cable gland as per suitable size (j) Analog time switch 3 pole-01 No (k) 3 pole power contactor 40 AmpsML-3 | 1 | EACH | |
168 | 168 | OUTGOING (a) MCCB 4 pole125 Amps, 415 V, 16 KA with fixed thermal magnetic release-02 No (b) MCCB 4 Pole 63 Amps, 415 V, 10 KA with fixed thermal magnetic release--03 No Note:- The contractor shall have to submit documentry evidence in support of authorisation of CPRI approved. | |||
169 | 169 | Supply, install , testing and commissioning of outdoor LT distribution feeder pillar IP-65 , CPRI approved of size 1.5mX1.2mX0.6m factory made, dust and vermin proof , double leaf shutter in front and single leaf shutter in rear made out of 3.15 mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly painted with powder coated paint and aluminium bus bar 400 amps, 415 volts, 50 Hz 3 phase and 4 wire system with the following items connected as under including supplying and fixing on MS channel 75mmx40mmx5mm in PCC foundation and PCC work around the panel board within two fit area:- INCOMING (a) MCCB 4 pole 200 Amps, 35 KA-01 No (b) On load change over switch disconnector of 250 Amps Cap-01No (c) Phase indicator Lamps (RYB phases)-01 Set (Set of Three) LED Cluster type (d) Digital Voltmeter 0-500Volts with selector switch,3 phase,415 Volts AC supply-01 Nos (e) Digital Ammeter with selector switch, 3 phase, 415 Volts AC supply-01 Nos (f) Digital current frequency meter with selector switch, 3 phase,415 volts AC supply-01 Nos (g) Neon Lamp LED type-03 Nos (h) Cable gland as per suitable size (j) Analog time switch 3 pole-01 No (k) 3 pole power contactor 40 AmpsML-3 | 2 | EACH | |
170 | 170 | OUTGOING (a) MCCB 4 Pole 63 Amps, 415 V, 10 KA with fixed thermal magnetic release--03 No Note:- The contractor shall have to submit documentry evidence in support of authorisation of CPRI approved. | |||
171 | 171 | Material and labour for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC casing capping of suitable size including taking down old unserviceable one complete all as specified and directed, .(Note: (i)two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length (ii) necessary plastering in the disturbed surface of wall and distemering/white washing to match the existing colour shall be included in the unit rate quoted.).Make- Cable- Finolex/RR cable/KEI, PVC Casing Capping- Presto plast/Finolex/Kalinga. | 77 | RM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail