Council Of Scientific And Industrial Research-CSIR has published Provision Of Temporary Shed In Front Of Fly Ash Shed For Storing Of R And D Raw Materials Of E And S Dept . At Immt , Bhubaneswar. Submission Date for this Tender is 27-01-2021. Shed Construction Tenders in CSIR-IMMT, BHUBANESWAR Odisha. Bidders can get complete Tender details and download the document.
| Name of Work: Provision of temporary shed infront of Fly Ash shed for storing of R & D raw materials of E & S Departmenat at CSIR-IMMT, Bhubaneswar-751013 | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. | 29 | Cum | |
| 2 | 2 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 75 | Cum | |
| 3 | 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | 2.5 | Cum | |
| 4 | 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) | 4 | Cum | |
| 5 | 5 | Half brick masonry with non modular fly ash bricks of class designation 7.50, conformingio IS :12894, in super structure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand) | 36 | Sqm | |
| 6 | 6 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. | 36 | Sqm | |
| 7 | 7 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in :Cement mortar 1:6 (1 cement : 6 Coarse sand | 1 | Cum | |
| 8 | 8 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) | 75 | Sqm | |
| 9 | 9 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer | 75 | Sqm | |
| 10 | 10 | Finishing walls with water proofing cement paint of required shadeNew work (Two or more coats applied @ 3.84 kg/10 sqm) : | 75 | Sqm | |
| 11 | 11 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using flats 30x6mm for diagonal braces and central cross piece | 4 | Sqm | |
| 12 | 12 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | 1361 | Kg | |
| 13 | 13 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 64 | Sqm | |
| 14 | 14 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 107 | Sqm | |
| 15 | 15 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.40 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | 9.5 | Mtr | |
| 16 | 16 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | 2.5 | Cum | |
| 17 | 17 | Providing and fixing PVC net of approved make and design of average aperature 25mm with G.I. wire in frames as per the direction of EIC. | 35 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
