Kerala Irrigation Infrastructure Development Corporation Limited-KIIDC has published Kiifb Project Kiidc Thalassery Heritage Project Phase 1 Pazhassi Circuit Kottiyoor Shiva Temple Streetscape Landscaping , Agrashala , Car Parking , Stage And Electrical Works At Kottiyoor Shiva Temple In Iritty , Kannur District Heritage Project W. Submission Date for this Tender is 10-02-2021. Electrical Maintenance Tenders in Iritty , Kannur District Kerala. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 03-Feb-2021 | Date Extension | Date | 10-02-2021 |
Work Name : KIIFB PROJECT- THALASSERY HERITAGE PROJECT - PHASE 1 - Pazhassi circuit - Kottiyoor Shiva Temple (Streetscape - Landscaping, Agrashala, Car parking, Stage and Electrical works at Kottiyoor Shiva Temple in Iritty, Kannur District) | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Appendix A: Landscaping | BI01010001010000000000000515BI0100001113 | ||
2 | 1.01 | 2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared | BI01010001010000000000000515BI0100001114 | 1141.5 | sqm |
3 | 1.02 | 16.1 : Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. | BI01010001010000000000000515BI0100001115 | 1141.5 | sqm |
4 | 1.03 | 16.78.1 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30 | BI01010001010000000000000515BI0100001116 | 171.225 | cum |
5 | 1.04 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001117 | 61.602 | cum |
6 | 1.05 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001118 | 13.827 | cum |
7 | 1.06 | 7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001119 | 19.058 | cum |
8 | 1.07 | 4.11 : Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001120 | 38.115 | sqm |
9 | 1.08 | 4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | BI01010001010000000000000515BI0100001121 | 218.642 | sqm |
10 | 1.09 | 50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. | BI01010001010000000000000515BI0100001122 | 59.577 | cum |
11 | 1.1 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001123 | 85.801 | kilogram |
12 | 1.11 | od260307/2020_2021 : Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. | BI01010001010000000000000515BI0100001124 | 5.4 | sqm |
13 | 1.12 | od171859/2020_2021 : Setting up of a document with Photographs of site before and after the work. The item includes developing of a photographs to a size of 6"x4" and preparing a booklet. | BI01010001010000000000000515BI0100001125 | 20 | each |
14 | 1.13 | 5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001126 | 18.362 | cum |
15 | 1.14 | od203429/2020_2021 : Supplying, fitting, fixing and handing over the garden benches (Victoria Bench - Product Code :PGGD18) or equivalent as specified in the drawings of make ARIHANT or equivalent acceptable to engineer -in - chief, with prior approval, fully complete at site with all accessories, labours, power supply etc. | BI01010001010000000000000515BI0100001127 | 7 | each |
16 | 1.15 | od203748/2020_2021 : Supply and providing foundation bolts of size 20mm dia, 50 cm long including nuts and washers for lamp poles, bollards, outdoor lamp fittings etc. | BI01010001010000000000000515BI0100001128 | 375 | kilogram |
17 | 1.16 | od204029/2020_2021 : Supplying & fixing Cast iron lamp pole of height 4mtrs. base dia.250mm and top dia.75mm (weight 110kg. Arox. with provision for fixing MCB and cably entry/exit at bottom made of FG15 grade cast iron with MRF apoxy black finish over a coat of zinc chromate base on existing concrete foundation using foundation bolts, nuts and washers. | BI01010001010000000000000515BI0100001129 | 40 | each |
18 | 1.17 | od258283/2020_2021 : Providing and laying rough finish narasipuram stone flooring in required design and pattern (55.88 cm x 55.88 cm) or (86.36 x 55.88 cm) or the nearest in linear as well as curvilinear all complete as per the architectural drawing with 40 - 50 mm thick stone slab over 50 mm thick compacted bed of 6 mm stone aggregate etc. complete as specified and as directed by the engineer in charge | BI01010001010000000000000515BI0100001130 | 1234.52 | sqm |
19 | 1.18 | od275876/2020_2021 : Engaging Gardner for trees/ plants/ shrubs/ lawn for a period of 1 year after the completion of work | BI01010001010000000000000515BI0100001131 | 24 | Day |
20 | 1.19 | od275877/2020_2021 : Engaging labour for maintaining, cleaning and watering trees/ plants/ shrubs/ lawn for a period of 1 year after the completion of work. | BI01010001010000000000000515BI0100001132 | 365 | Day |
21 | 1.2 | od275893/2020_2021 : Supplying and planting of approved Hedge Plants at required spacing as shown in drawing. Rate shall include cost of plants soil work,manure and fertilizers used in top dressing, chemical and machanical pest control, staking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (4)Ixora noragrant | BI01010001010000000000000515BI0100001133 | 30 | each |
22 | 1.21 | od275894/2020_2021 : Supplying and planting of approved shrubs at required spacing as shown in drawing. Rate shall include cost of plants soil work,manure and fertilizers used in top dressing, chemical and machanical pest control, staking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (13)Tabernaemontana green | BI01010001010000000000000515BI0100001134 | 30 | each |
23 | 1.22 | od275895/2020_2021 : Supplying and planting of approved shrubs at required spacing as shown in drawing. Rate shall include cost of plants soil work,manure and fertilizers used in top dressing, chemical and machanical pest control, staking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (9)Oleander tall | BI01010001010000000000000515BI0100001135 | 30 | each |
24 | 1.23 | od275896/2020_2021 : Supplying and planting of approved shrubs at required spacing as shown in drawing. Rate shall include cost of plants soil work,manure and fertilizers used in top dressing, chemical and machanical pest control, staking and maintaining the planting till it is handed over from the date of planting labour charges, pest control operating etc. (7)Gardenia | BI01010001010000000000000515BI0100001136 | 30 | each |
25 | 1.24 | od275897/2020_2021 : Supplying and planting of approved trees species of a height 2.0m to 2.5m, at the specified location as shown in the drawing.Rate shall include Cost of plants, soil work inclusive of red soil, sand and manure mix staking and planting of trees sapling, replacement of dead trees and for providing a pit size 75 x 75 x 75 cm and maintainance till the competion of project work.( 1).Plumeria Alba | BI01010001010000000000000515BI0100001137 | 15 | each |
26 | 2 | Appendix B: Agrashala - Oottupura and Pantry | BI01010001010000000000000515BI0100001138 | ||
27 | 2.01 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001139 | 78.541 | cum |
28 | 2.02 | 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | BI01010001010000000000000515BI0100001140 | 59.172 | cum |
29 | 2.03 | 2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared | BI01010001010000000000000515BI0100001141 | 201 | sqm |
30 | 2.04 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001142 | 28.989 | cum |
31 | 2.05 | 7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001143 | 54.547 | cum |
32 | 2.06 | 4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | BI01010001010000000000000515BI0100001144 | 29.797 | sqm |
33 | 2.07 | 4.11 : Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001145 | 19.393 | sqm |
34 | 2.08 | 13.2.1 : 15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand) | BI01010001010000000000000515BI0100001146 | 237.042 | sqm |
35 | 2.09 | 50.6.7.1 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. | BI01010001010000000000000515BI0100001147 | 3.292 | cum |
36 | 2.1 | 11.26.1 : Kota stone slab flooring over 20 mm ( average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)25 mm thick | BI01010001010000000000000515BI0100001148 | 163.54 | sqm |
37 | 2.11 | 8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work | BI01010001010000000000000515BI0100001149 | 54 | metre |
38 | 2.12 | 8.12 : Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | BI01010001010000000000000515BI0100001150 | 19.802 | sqm |
39 | 2.13 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001151 | 1.654 | cum |
40 | 2.14 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | BI01010001010000000000000515BI0100001152 | 13.743 | sqm |
41 | 2.15 | 8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm | BI01010001010000000000000515BI0100001153 | 7.116 | sqm |
42 | 2.16 | 9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood | BI01010001010000000000000515BI0100001154 | 0.159 | cum |
43 | 2.17 | 9.5.1.2 : Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.30 mm thick shutters | BI01010001010000000000000515BI0100001155 | 2.436 | sqm |
44 | 2.18 | 9.7.1 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Second class teak wood | BI01010001010000000000000515BI0100001156 | 4.968 | sqm |
45 | 2.19 | 8.5 : Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. | BI01010001010000000000000515BI0100001157 | 4 | each |
46 | 2.2 | od221721/2019_2020 : Providing and fixing granite stone pillars of size 20 cm and height 2 - 2.5 m with ornamental carvings and decorative base and collars as per the design and drawing of the Architect including all cost and conveyance, labour charges etc. complete as per the direction of engineer at site | BI01010001010000000000000515BI0100001158 | 24 | no |
47 | 2.21 | 50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. | BI01010001010000000000000515BI0100001159 | 22.271 | cum |
48 | 2.22 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | BI01010001010000000000000515BI0100001160 | 215.74 | sqm |
49 | 2.23 | 13.48.3 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | BI01010001010000000000000515BI0100001161 | 215.74 | sqm |
50 | 2.24 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001162 | 5.281 | sqm |
51 | 2.25 | 13.69.1 : Polishing on wood work with ready mixed wax polish of approved brand and manufacture:New work | BI01010001010000000000000515BI0100001163 | 10.515 | sqm |
52 | 2.26 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001164 | 6.594 | sqm |
53 | 2.27 | 9.53 : Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001165 | 48 | each |
54 | 2.28 | 9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | BI01010001010000000000000515BI0100001166 | 105.601 | kg |
55 | 2.29 | 17.10.2.3 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board470x420 mm bowl depth 178 mm | BI01010001010000000000000515BI0100001167 | 4 | each |
56 | 2.3 | 17.28.1.2 : Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.\nwaste fittings complete.Semi rigid pipe40 mm dia | BI01010001010000000000000515BI0100001168 | 4 | each |
57 | 2.31 | 50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | BI01010001010000000000000515BI0100001169 | 10363.2 | kg |
58 | 2.32 | 12.48 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) | BI01010001010000000000000515BI0100001170 | 259.08 | sqm |
59 | 2.33 | 12.49 : Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ). | BI01010001010000000000000515BI0100001171 | 54.18 | metre |
60 | 2.34 | od222978/2019_2020 : Providing and fixing 8" or nearest size Punit antique tower bolt including all cost and labour charges | BI01010001010000000000000515BI0100001172 | 2 | each |
61 | 2.35 | od222979/2019_2020 : Providing and fixing antique brass handle ring (approved by consultant) including all cost and labour charges. | BI01010001010000000000000515BI0100001173 | 2 | each |
62 | 2.36 | od222982/2019_2020 : Providing and fixing second class teakwood eve board 20cm wide including all charges etc complete | BI01010001010000000000000515BI0100001174 | 102.49 | metre |
63 | 2.37 | 9.78 : Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete. | BI01010001010000000000000515BI0100001175 | 2 | no |
64 | 2.38 | 9.72.2 : Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:125x70x4 mm ( ordinary type) | BI01010001010000000000000515BI0100001176 | 36 | no |
65 | 2.39 | 9.72.1 : Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:125x85x5.5 mm (heavy type) | BI01010001010000000000000515BI0100001177 | 8 | no |
66 | 2.4 | od258283/2020_2021 : Providing and laying rough finish narasipuram stone flooring in required design and pattern (55.88 cm x 55.88 cm) or (86.36 x 55.88 cm) or the nearest in linear as well as curvilinear all complete as per the architectural drawing with 40 - 50 mm thick stone slab over 50 mm thick compacted bed of 6 mm stone aggregate etc. complete as specified and as directed by the engineer in charge | BI01010001010000000000000515BI0100001178 | 1.35 | sqm |
67 | 2.41 | 5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001179 | 0.631 | cum |
68 | 2.42 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001180 | 11.152 | sqm |
69 | 2.43 | 5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001181 | 1331.93 | kg |
70 | 2.44 | 50.18.8.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2 | BI01010001010000000000000515BI0100001182 | 30 | metre |
71 | 2.45 | 50.18.8.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2 | BI01010001010000000000000515BI0100001183 | 30 | metre |
72 | 2.46 | 50.18.8.7.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2 | BI01010001010000000000000515BI0100001184 | 30 | metre |
73 | 2.47 | 50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 | BI01010001010000000000000515BI0100001185 | 30 | metre |
74 | 2.48 | 50.18.9.20.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow | BI01010001010000000000000515BI0100001186 | 5 | no |
75 | 2.49 | 50.18.9.20.3 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Door Elbow | BI01010001010000000000000515BI0100001187 | 5 | no |
76 | 2.5 | od167277/2020_2021 : Providing and fixing C.P. brass bib cock of superior quality Jaguar or equivalent brand conforming to IS:8931. 15 mm nominal bore | BI01010001010000000000000515BI0100001188 | 4 | each |
77 | 2.51 | 19.32.1 : Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001189 | 1 | each |
78 | 2.52 | od260033/2020_2021 : Providing fixing on roof pressed clay ceiling tiles (30 x 25) mm size of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately). | BI01010001010000000000000515BI0100001190 | 259.08 | sqm |
79 | 3 | Appendix C: Car Parking | BI01010001010000000000000515BI0100001191 | ||
80 | 3.01 | 16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge) | BI01010001010000000000000515BI0100001192 | 4.05 | cum |
81 | 3.02 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001193 | 1.35 | cum |
82 | 3.03 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001194 | 2.025 | cum |
83 | 3.04 | od139325/2020_2021 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm stone aggregate, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001195 | 500 | sqm |
84 | 4 | Appendix D: Stage near car parking | BI01010001010000000000000515BI0100001196 | ||
85 | 4.01 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001197 | 38.487 | cum |
86 | 4.02 | 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | BI01010001010000000000000515BI0100001198 | 24.018 | cum |
87 | 4.03 | 2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared | BI01010001010000000000000515BI0100001199 | 150 | sqm |
88 | 4.04 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001200 | 12.542 | cum |
89 | 4.05 | 7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001201 | 28.943 | cum |
90 | 4.06 | 4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | BI01010001010000000000000515BI0100001202 | 11.373 | sqm |
91 | 4.07 | 50.6.7.1 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. | BI01010001010000000000000515BI0100001203 | 3.24 | cum |
92 | 4.08 | 8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work | BI01010001010000000000000515BI0100001204 | 14.4 | metre |
93 | 4.09 | 8.12 : Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | BI01010001010000000000000515BI0100001205 | 91.612 | sqm |
94 | 4.1 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001206 | 0.857 | cum |
95 | 4.11 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | BI01010001010000000000000515BI0100001207 | 7.44 | sqm |
96 | 4.12 | 9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood | BI01010001010000000000000515BI0100001208 | 0.091 | cum |
97 | 4.13 | 9.5.1.2 : Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.30 mm thick shutters | BI01010001010000000000000515BI0100001209 | 1.409 | sqm |
98 | 4.14 | 9.7.1 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Second class teak wood | BI01010001010000000000000515BI0100001210 | 3.617 | sqm |
99 | 4.15 | 13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm | BI01010001010000000000000515BI0100001211 | 111.303 | sqm |
100 | 4.16 | 9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | BI01010001010000000000000515BI0100001212 | 35.2 | kg |
101 | 4.17 | 9.53 : Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001213 | 24 | each |
102 | 4.18 | 9.72.1 : Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:125x85x5.5 mm (heavy type) | BI01010001010000000000000515BI0100001214 | 16 | no |
103 | 4.19 | 9.72.2 : Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:125x70x4 mm ( ordinary type) | BI01010001010000000000000515BI0100001215 | 12 | no |
104 | 4.2 | 9.78 : Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete. | BI01010001010000000000000515BI0100001216 | 2 | no |
105 | 4.21 | 4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001217 | 1.544 | cum |
106 | 4.22 | od224593/2019_2020 : Special type Exposed laterite masonry with neatly dressed laterite stone of size 30x20x20cm or nearest size in cement mortar 1:6 for superstructure above plinth level upto floor two level including all cost and conveyance labour charges etc complete | BI01010001010000000000000515BI0100001218 | 10.92 | cum |
107 | 4.23 | 13.2.1 : 15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand) | BI01010001010000000000000515BI0100001219 | 111.303 | sqm |
108 | 4.24 | 50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. | BI01010001010000000000000515BI0100001220 | 8.087 | cum |
109 | 4.25 | 9.74.2 : Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:200x10 mm | BI01010001010000000000000515BI0100001221 | 2 | no |
110 | 4.26 | 50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | BI01010001010000000000000515BI0100001222 | 1598.39 | kg |
111 | 4.27 | 12.48 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) | BI01010001010000000000000515BI0100001223 | 39.96 | sqm |
112 | 4.28 | od224870/2019_2020 : Providing and fixing teakwood eve board 20cm wide including all charges etc, complete | BI01010001010000000000000515BI0100001224 | 17.32 | per metre |
113 | 4.29 | od224872/2019_2020 : Providing and fixing dry cladding with 30 mm thick gang saw cut stone with (machine cut edges) of uniform colour and size, fixed to structural steel frame work and /or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-Charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately.)\nLaterite stone of size 30 cm x 15 cm | BI01010001010000000000000515BI0100001225 | 2.11 | sqm |
114 | 4.3 | 5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001226 | 68.45 | kg |
115 | 4.31 | od260086/2020_2021 : Providing & fixing on roof pressed clay ceiling tiles (30 x 25) mm size of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately). | BI01010001010000000000000515BI0100001227 | 39.96 | sqm |
116 | 5 | Appendix-E Electrical works for Agrashala, Landscape, Green room and car parking area | BI01010001010000000000000515BI0100001228 | ||
117 | 5.01 | 1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC\ninsulated copper conductor single core cable in surface / recessed medium class PVC conduit,\nwith modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS\nPVC insulated copper conductor single core cable etc as required.Group C | BI01010001010000000000000515BI0100001229 | 58 | point |
118 | 5.02 | 1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C | BI01010001010000000000000515BI0100001230 | 10 | point |
119 | 5.03 | 1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire | BI01010001010000000000000515BI0100001231 | 70 | metre |
120 | 5.04 | 1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | BI01010001010000000000000515BI0100001232 | 30 | metre |
121 | 5.05 | 1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire | BI01010001010000000000000515BI0100001233 | 80 | metre |
122 | 5.06 | 1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm | BI01010001010000000000000515BI0100001234 | 30 | metre |
123 | 5.07 | 1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings). | BI01010001010000000000000515BI0100001235 | 2 | each |
124 | 5.08 | 1.32 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. | BI01010001010000000000000515BI0100001236 | 11 | each |
125 | 5.09 | 1.33 : Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding connection etc as required. | BI01010001010000000000000515BI0100001237 | 59 | each |
126 | 5.1 | 1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | BI01010001010000000000000515BI0100001238 | 10 | each |
127 | 5.11 | 90.3.19.3 : Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required 1200mm 1x20W LED Lamp with box type fixture | BI01010001010000000000000515BI0100001239 | 21 | each |
128 | 5.12 | od139861/2020_2021 : SITC of LED Wall mount Up-down light of 6 W 3000 K COB, Al Die casting, Wall mount Luminaire( Havells XING HEXA or equivalent) | BI01010001010000000000000515BI0100001240 | 4 | each |
129 | 5.13 | od139863/2020_2021 : SITC of Decorative, wall mounting fixture, in durable plastic body designer mesh in gold finish suitable for 9 W LED lamp. (Havells Glaze or equivalent) | BI01010001010000000000000515BI0100001241 | 16 | each |
130 | 5.14 | od139864/2020_2021 : Supply Conveyance, installation, testing and commissioning of 5W batten integrated sleek extruded aluminium LED channel with white acrylic cover as mirror light. (Bajaj BCLSB05 NW or equivalent) | BI01010001010000000000000515BI0100001242 | 2 | each |
131 | 5.15 | 90.4.5.2 : Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.\n1200mm sweep -5star rated ceiling fan complete with 300mm down rod , canopies, shackeles and blades and resistance type regulator working on 230V/240V single phase A/C | BI01010001010000000000000515BI0100001243 | 10 | each |
132 | 5.16 | 90.4.1 : Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. | BI01010001010000000000000515BI0100001244 | 8 | each |
133 | 5.17 | 90.4.2 : Supply and installation of suitable size MS belt type fan clamp fabricated from flat iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required. | BI01010001010000000000000515BI0100001245 | 2 | each |
134 | 5.18 | 90.4.9 : Charges for cutting holes suitable for accommodating exhaust fans above 305mm sweep and up to 450mm sweep including plastering colour washing etc. as required. | BI01010001010000000000000515BI0100001246 | 8 | each |
135 | 5.19 | od139881/2020_2021 : Supply, installation , testing and commissioning of exhaust fans of size up to 450mm in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan. 300/305 mm sweep Light Duty Exhaust fan in metal frame working on 230 V A/C | BI01010001010000000000000515BI0100001247 | 8 | each |
136 | 5.2 | 2.3.1 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door | BI01010001010000000000000515BI0100001248 | 1 | each |
137 | 5.21 | 2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door | BI01010001010000000000000515BI0100001249 | 2 | each |
138 | 5.22 | 90.11.1.10 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required 4 way (8+12) - three phase double cover (IP42/43) | BI01010001010000000000000515BI0100001250 | 1 | each |
139 | 5.23 | 90.11.1.14 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required 4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP\n42/43) | BI01010001010000000000000515BI0100001251 | 1 | each |
140 | 5.24 | od139908/2020_2021 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, RCBO having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63A | BI01010001010000000000000515BI0100001252 | 1 | each |
141 | 5.25 | od139910/2020_2021 : Supply and fixing following rating, 4pole, 415V RCBO in the existing MCB DB and giving connection as requited. 32A, 30mA | BI01010001010000000000000515BI0100001253 | 1 | each |
142 | 5.26 | 2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual\ncurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps | BI01010001010000000000000515BI0100001254 | 1 | each |
143 | 5.27 | 2.14.2 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual\ncurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps | BI01010001010000000000000515BI0100001255 | 2 | each |
144 | 5.28 | 2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole | BI01010001010000000000000515BI0100001256 | 2 | each |
145 | 5.29 | 2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole | BI01010001010000000000000515BI0100001257 | 3 | each |
146 | 5.3 | 2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole | BI01010001010000000000000515BI0100001258 | 47 | each |
147 | 5.31 | 5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. | BI01010001010000000000000515BI0100001259 | 4 | set |
148 | 5.32 | 5.14 : Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. | BI01010001010000000000000515BI0100001260 | 1 | metre |
149 | 5.33 | 5.13 : Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required. | BI01010001010000000000000515BI0100001261 | 60 | metre |
150 | 5.34 | od139920/2020_2021 : Supply and fixing cast iron post top lanternd 28W inbuilt LED with shade of size 540x450mm with powder coated finish an giving connection as required. Fittings should conform to IP65. | BI01010001010000000000000515BI0100001262 | 40 | each |
151 | 5.35 | od205914/2020_2021 : Supply and fitting167x125mmx82mm ) Sintex cable junction box ( on existing lamp post using suitable clamps. | BI01010001010000000000000515BI0100001263 | 47 | each |
152 | 5.36 | od205934/2020_2021 : Supply and fixing 32A, 4way connector in the existing junction box | BI01010001010000000000000515BI0100001264 | 47 | each |
153 | 5.37 | od207048/2020_2021 : SITC of New generation, energy saving, environmental friendly, long life aesthetically designed aluminium bollard landscape luminaire for diffused lighting with high power LED as light source. 8W, 1m height, IP 65.( Havells BAMBOOBL8WLED757PSYMTOPCM or equivalent) | BI01010001010000000000000515BI0100001265 | 35 | each |
154 | 5.38 | od207071/2020_2021 : SITC Of feeder pillar complete with the following accessories. Incomer: 40A, DP<br>Isolator. 40A, DP, RCCB, 100mA. Timer control with contactor. Auto/ Manual switch. Outgoing: 10A, SP MCB - 4 Nos. | BI01010001010000000000000515BI0100001266 | 1 | each |
155 | 5.39 | od207129/2020_2021 : Supply of 2.5sqmm 2core PVC/XLPE insulated armoured copper conductor cable for working voltage upto and including 1100V conforming to IS1584/Part I/1988 for PVC & IS7098 PartI for XLPE | BI01010001010000000000000515BI0100001267 | 150 | metre |
156 | 5.4 | 90.12.1.2 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil). 2 core 6 sq mm | BI01010001010000000000000515BI0100001268 | 20 | metre |
157 | 5.41 | 90.12.41.2 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 2 core 6 sq mm with\nfactory made clamp | BI01010001010000000000000515BI0100001269 | 5 | metre |
158 | 5.42 | 90.12.1.3 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil). 2 core 10 sq mm | BI01010001010000000000000515BI0100001270 | 300 | metre |
159 | 5.43 | 90.12.1.40 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil). 4 core 10 sq mm | BI01010001010000000000000515BI0100001271 | 20 | metre |
160 | 5.44 | 90.12.41.3 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 2 core 10 sq mm with\nfactory made clamp | BI01010001010000000000000515BI0100001272 | 50 | metre |
161 | 5.45 | 90.12.41.33 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 4 core 10 sq mm with\nfactory made clamp | BI01010001010000000000000515BI0100001273 | 10 | metre |
162 | 5.46 | 9.1.1 : Supplying and making end termination with brass compression gland and aluminium lugs for \nfollowing size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV \ngrade as required.2 X 6 sq. mm (19mm) | BI01010001010000000000000515BI0100001274 | 2 | set |
163 | 5.47 | 9.1.2 : Supplying and making end termination with brass compression gland and aluminium lugs for \nfollowing size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV \ngrade as required.2 X 10 sq. mm (19mm) | BI01010001010000000000000515BI0100001275 | 80 | set |
164 | 5.48 | 90.16.1.2 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 2.65 mm copper conductor (12SWG) | BI01010001010000000000000515BI0100001276 | 50 | metre |
165 | 5.49 | 90.16.1.10 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.25 mm GI conductor (10 SWG) | BI01010001010000000000000515BI0100001277 | 50 | metre |
166 | 5.5 | 90.12.9.2 : Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench 50/38 mm or nearest size | BI01010001010000000000000515BI0100001278 | 600 | metre |
167 | 5.51 | od271583/2020_2021 : Powerpak MS-1001 3 Leg Boom Microphone Stand (Black) | BI01010001010000000000000515BI0100001279 | 2 | each |
168 | 5.52 | od271584/2020_2021 : Shure SM58S Vocal Microphone | BI01010001010000000000000515BI0100001280 | 2 | each |
169 | 5.53 | od271585/2020_2021 : Sonic Plumber Neutrik XLR Male to Female 3 pin Balanced Microphone Cable (2 meter) | BI01010001010000000000000515BI0100001281 | 3 | each |
170 | 5.54 | od265373/2020_2021 : SITC Of 350W RMS MIXER AMPLIFIER, 3 MIC, 2 AUX, 100V/70V AND 4OHMS , BALANCED MIC,FREQUENCY RESPONSE (50 HZ-16000HZ),S/N RATIO-MIC1,2,3,4:66DB;AUX 1:80 DB,THD-LESS THAN 1% AT 1 KHZ,1/3 RATED POWER, MUTING FUNCTION-MIC 1 OVERRIDES OTHER INPUT SIGNALS WITH 0-30 DB ATTENUATION,CONTROLS-INDIVIDUAL GAIN CONTROLS, POWER SWITCH;BASS: 10DB AT 100HZ,TREBLE: 10DB AT10000HZ. | BI01010001010000000000000515BI0100001282 | 1 | no |
171 | 5.55 | od271582/2020_2021 : Ahuja UHC 30W Horn Speaker | BI01010001010000000000000515BI0100001283 | 6 | each |
172 | 5.56 | od265897/2020_2021 : Supply Conveyance, installation, testing and commissioning of 30W flood light with high pressure die cast aluminium and IP 65 protection. (Bajaj MAGNUM or equivalent) | BI01010001010000000000000515BI0100001284 | 4 | each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail