}

Construction Of 2 No . A . C . Bus Stand Including Illumination Work At Different Places On Oppossite To Elite Cinema Corporation Footpath On S . N . Banerjee Road Kmc Zone , P . S . - New Market , Kmc Ward No . 46 And Moulali Five Point Crossing O, kolkata-West Bengal

West Bengal Transport Infrastructure Development Corporation Limited has published Construction Of 2 No . A . C . Bus Stand Including Illumination Work At Different Places On Oppossite To Elite Cinema Corporation Footpath On S . N . Banerjee Road Kmc Zone , P . S . - New Market , Kmc Ward No . 46 And Moulali Five Point Crossing O. Submission Date for this Tender is 03-02-2021. Electrification Work Tenders in kolkata West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

26655970
Construction Of 2 No . A . C . Bus Stand Including Illumination Work At Different Places On Oppossite To Elite Cinema Corporation Footpath On S . N . Banerjee Road Kmc Zone , P . S . - New Market , Kmc Ward No . 46 And Moulali Five Point Crossing O
Open Tender
Indian
West Bengal
kolkata
03-02-2021

Tender Details

Construction Of 2 No . A . C . Bus Stand Including Illumination Work At Different Places On Oppossite To Elite Cinema Corporation Footpath On S . N . Banerjee Road Kmc Zone , P . S . - New Market , Kmc Ward No . 46 And Moulali Five Point Crossing Opposit

Key Value

Document Fees
Refer document
EMD
INR 35312.0 /-
Tender Value
INR 17.65 Lakhs /-

BOQ Items

Name of Work: Construction of 2 (two) no. A.C. Bus Stand including illumination work at different places on Oppossite to Elite Cinema(Corporation footpath) on S.N. Banerjee road (KMC zone), P.S.- New Market, KMC Ward no. 46 and Moulali Five point Crossing opposite to "Majhar" under KMC Ward no. 53
Sl. No. Item Description Item Code / Make Quantity Units
1 1 CIVIL WORKS item1
2 1.01 Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m.\na) In ground floor including roof. item2 42 Sqm
3 1.02 Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.Depth of excavation not exceeding 1,500 mm. item3 20 Cum
4 1.03 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of\nmeasurement of finished quantity of work)\n(a) With earth obtained from excavation of foundation. item4 6 Cum
5 1.04 Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of\nsupply of sand. item5 6 Cum
6 1.05 Single Brick Flat Soling of picked jhama bricks including\nramming and dressing bed to proper level and filling joints with\nlocal sand. item6 76 Sqm
7 1.06 Cement concrete with graded stone ballast (40 mm size excluding shuttering)\nIn ground floor - (A) [Pakur Variety]\n(a) 1:3:6 proportion\n item7 4 Cum
8 1.07 Brick work with 1st class bricks in cement mortar (1:4) (a) In superstructure, ground floor item8 8.5 Cum
9 1.08 125 mm. thick brick work with 1st class bricks in cement\nmortar (1:4) in ground floor. item9 10 Cum
10 1.09 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. item10 26 Cum
11 1.1 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required racing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)\n(When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof)\n(a) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work item11 190 Sqm
12 1.11 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.\n(a) For works in foundation, basement and upto roof of ground floor/upto 4 m\n(i) Tor steel/Mild Steel item12 2.6 M.T
13 1.12 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar\nincluding rounding off or chamfering corners as directed and\nraking out joints including throating, nosing and drip course,\nscaffolding/staging where necessary (Ground floor).[Excluding\ncost of chipping over concrete surface]\n(i) With 1:6 cement mortar\n(a) 20 mm thick plaster item13 160 Sqm
14 1.13 (ii) With 1:4 cement mortar\n(a) 10 mm thick plaster item14 140 Sqm
15 1.14 Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc.\nNOTE:Cement 0.152 cu.m per100 sq.m. item15 24 Sqm
16 1.15 Rendering the Surface of walls and ceiling with White Cement base\nWATER PROOF wall putty of approved make & brand.(1.5 mm thick) item16 140 Sqm
17 1.16 Making V-groove line ( 12 mm. wide, 12 mm. deep) in plastered\nsurface. item17 990 Mtr
18 1.17 Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface). item18 56 Sqm
19 1.18 Supplying profiles of required section made of Aluminium Alloy\nExtrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In-Charge. (Payment will be made on finished length of the work).\n(A) In 10-12 Micron thickness Annodizing film Fixed partitions.\n(Unsupported length of vertical member more than 1.5 mtr.or both ends of vertical member restrained but panels more than 0.9 Sq.m)\ni) Top , bottom & side member. item19 140 Mtr
20 1.19 ii) Intermediate member. item20 32 Mtr
21 1.2 iii) Glazing clip. item21 504 Mtr
22 1.21 Movable door shutter.\ni) Door frame. (Top & sides). item22 20.8 Mtr
23 1.22 ii) Shutter :\nTop rail. item23 4 Mtr
24 1.23 Bottom rail. item24 4 Mtr
25 1.24 Lock rail item25 4 Mtr
26 1.25 Door vertical. item26 16.8 Mtr
27 1.26 Glazing clip. item27 50 Mtr
28 1.27 Labour charge for fabrication and installation of composite door, window , partitions made from annodized extruded alloy aluminium sections for the following units:-\n(A)Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per\ndrawing, specification and direction of Engineer in charge. item28 80 Sqm
29 1.28 Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge.\n(a) 250 mm long item29 4 Each
30 1.29 (A) Supplying Aluminium casted body hydraulic door closer as per I.S.I. item30 4 Each
31 1.3 (B) Supplying Heavy Duty Aluminium Handle (EBCO Type)\n(Natural White) item31 4 Each
32 1.31 Supplying, fitting and fixing in position fibre glass panes of approved\nquality with resin, nail, clip etc. as per IS:12866-1989. (In all floors for internal wall & upto 6 m height for external wall)\n(a) 6.0 mm thick (10.0 Kg/Sq.m) item32 80 Sqm
33 1.32 Filling the gap in between aluminium frame & adjacent RCC / Brick/\nStone work by providing weather silicon sealant over 6mm dia backer\nrod of approved quality as per architectural drawings and direction of\nEngineer-in-Charge complete.\nUpto 5 mm depth and 5 mm width\n(a) Ground Floor item33 80 M
34 1.33 Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied\nby the contrr]e) \n(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.\n(A) Deep Colour & White item34 82 Sqm
35 1.34 Supplying, fitting & fixing granite tiles 10mm to 12mm. thick in columns, wall, facia etc. with 15 thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. [Using cement slurry at back side of tiles@ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]\nArea of each slab upto 0.2 Sq.m item35 14.4 Sqm
36 1.35 Supplying& laying 20 mm designer chequered tiles of any shade and of approved quality as per IS: 1237: 1980 laid in patterns as directed in pavement, footpath including necessary underlay 25 mm thick average cement mortar (1:3) complete in all respect with all labour and materials [using cement slurry @ 4.4 kg/Sq.m at back side of tiles. Cement of mortar & slurry will be supplied by the Department. Border concrete if necessary to be paid separately]. item36 20 Sqm
37 1.36 Applying Interior grade Acrylic Primer of approved quality and rand\non plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)\n(a) One Coat item37 140 Sqm
38 1.37 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive\ndecorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per\ndirection of the EIC.\nIn Ground Floor:\n(a) One Coat item38 160 Sqm
39 1.38 Protective and Decorative Acrylic exterior & interior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.\nIn Ground floor (Two Coat)\na) Premium 100% Acrylic Emulsion item39 300 Sqm
40 1.39 Supply & installation of Sunstar three seater Airport waiting and reception chair Stainless steel (ATC03) item40 6 Set
41 1.4 Installation of Traffic signage depicting Bus Stop, size 800 x 600 as per rectangular board approved drawing right from its foundation on any kind of ground surface, fabrication, signage & lettering with 3M refro- reflective, priming & painting etc. complete in all respect with supply of all materials, carrige labours, tools & plants etc. at the specified locations by the sides of road item41 2 Each
42 1.41 Steel Letterings (minimum 150 mm/100mm height) for displaying "Transport Department Government of West Bengal" (all in bold letters) in Bengali /English at the front outer RCC beam face of Passenger Shelter including all cost of materials and labours and carriage etc. complete. 150mm size item42 90 Each
43 1.42 Electrical Works : Supplying and fixing Sheet steel Main Switches on angle iron frame on wall 60/63 A (Make - Havells) item43 2 Each
44 1.43 Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+14 way (Make - Crabtree) item44 2 Each
45 1.44 Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 40A DP (Make - Legrand) \n item45 2 Each
46 1.45 Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 6-32A DP (Make - Legrand) \n item46 4 Each
47 1.46 Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 6-32A SP (Make - Legrand) \n item47 20 Each
48 1.47 Supply and delivery of 1.5 TR Capacity split Air Conditioner of rated cooling capacity of 18000 BTU/hr with 1 no. twin rotary compressor, 1 no. IDU of rated power supply - 230 V 1 Ph-50 Hz, 1 no. ODU of rated power supply - 230 V 1 Ph-50 Hz, Air flow/IDU :- 600 CFM. (Make - Hitachi) item48 4 Each
49 1.48 Erection and commissioning charges for 1.5 TR Air conditioner Machine item49 4 Each
50 1.49 Copper Refrigeration pipe line for liquid line (1/4" OD with 0.6 mm thick) supports & brackets item50 30 Mtr
51 1.5 Copper Refrigeration pipe line for suction line (5/8" OD with 0.7 mm thick) supports & brackets item51 30 Mtr
52 1.51 Supply & fixing pipe insulation in liquid line with 9 mm nitrile rubber tube item52 30 Mtr
53 1.52 Supply & fixing pipe insulation in suction line with 9 mm nitrile rubber tube item53 30 Mtr
54 1.53 Control cabling from condensing unit to control panel : 4 Core 2 sqmm communication cable item54 40 Mtr
55 1.54 Supply and fixing of Al power coated continuous grill item55 8 Sqmtr
56 1.55 Supply and laying PVC drain pipe with thermal insulation having inner diameter 25 mm item56 40 Mtr
57 1.56 Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: (a) By TATA-Medium GI pipe item57 4 Set
58 1.57 Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required item58 1.2 Mtr
59 1.58 Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages (a) No. 4 SWG item59 28 Mtr
60 1.59 Supplying of 1.1 KV Grade XLPE/PVC insulated unarmoured Copper Conductor cable 4 x 84/0.3 (6.0 sqmm) item60 60 RM
61 1.6 Distn. wiring with 2 x 36/0.3 (2.5 sqmm) single core stranded copper conductor PVC insulated and unsheathed copper wire (Brand approved by EIC) in 19mm dia 3 mm thick polythene pipe with 1x22/0.3 (1.5sqmm) PVC insulated and unsheathed coper wire as ECC, complete with all accessories embedded in wall (for 15 A plug point/exhaust fan point) item61 60 RM
62 1.61 Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Brand approved by EIC) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. item62 4 Each
63 1.62 Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. item63 4 Each
64 1.63 Supplying & Fixing CRC sheet metal (16 SWG) JB-cum-Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl.elite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 300 mm x 200 mm x 65 mm item64 2 Each
65 1.64 Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required 300 mm x 200 mm x 65 mm item65 2 Each
66 1.65 Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required item66 8 Each
67 1.66 Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. item67 2 Each
68 1.67 Supply & Fixing 240 V, 20 A plug socket (Brand approved by EIC), without plug top and switch, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.. item68 4 Each
69 1.68 Supply and fixing 24W Surface Mount LED Panel Ceiling Light, 2400 LUMENS - Square, Cool White, 6500k, Size: 300 mm x 300 mm, Side Wall: 35 mm, Input Voltage: 90 - 265 V AC item69 4 Each
70 1.69 Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling with HW block and ceiling plates, nipples etc. as required item70 4 Each
71 1.7 Service Charges & Security Deposit to be paid to the power supply authority for electrical connection complete in all respect as per direction of the Engineer-in-Charge (payment to be made as per actual cost) item71 2 LS
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail