Military Engineer Services-MES has published Repair Replacement Of Ht Lt Cable And Allied Works At Mil Stn Gaya. Submission Date for this Tender is 16-02-2021. Cable Laying Tenders in Gaya Bihar. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 25-Jan-2021 | Certain pages incld BOQ has been revised | BOQ | 09-02-2021 |
2 | 09-Feb-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-02-2021 |
Name of Work: REPAIR / REPLACEMENT OF HT / LT CABLE AND ALLIED WORKS AT MIL STN GAYA | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Excavation in trenches not. exc. 1.5m wide and not exc. 1.5 in deep and getting out in soft/loose soil for laying of cable, pipe etc complete all as specified and directed. | 490 | Cum | |
2 | 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed. | 135 | Cum | |
3 | 3 | Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed. | 355 | Cum | |
4 | 4 | Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed .\nNote :- Punned thisckness shall only be considered for payment. | 130 | Cum | |
5 | 5 | Supply and laying in trenches dry well burnt locally available sub class “B” bricks over sand cushioning for protection of cable complete all as per specified and directed. | 11 | Per 1000 Nos | |
6 | 6 | Supplying and laying reinforced precast concrete cable cover, class EHV, type 1 with peak size 450mmx230mmx50mm over sand cushioning for protection of cable complete all as specified and directed | 1000 | Each | |
7 | 7 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable 16 Sqmm flat or circular complete as per requirement of site all as specified and directed . | 500 | RM | |
8 | 8 | Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 10 Sq mm, 4 Core complete alongwith proper thimbling and cable gland as per requirement of site all as specified and directed . | 300 | RM | |
9 | 9 | Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 25 Sq mm, 4 Core complete alongwith proper thimbling and cable gland as per requirement of site all as specified and directed . | 300 | RM | |
10 | 10 | Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 35 Sq mm, 3 ½ Core complete alongwith proper thimbling and cable gland as per requirement of site all as specified and directed . | 300 | RM | |
11 | 11 | Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 50 Sq mm, 3 ½ Core complete alongwith proper thimbling and cable gland as per requirement of site all as specified and directed . | 300 | RM | |
12 | 12 | Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 70 Sq mm, 3 ½ Core complete alongwith proper thimbling and cable gland as per requirement of site all as specified and directed . | 300 | RM | |
13 | 13 | Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 95 Sq mmx 3.5 Core complete alongwith proper thimbling and cable gland as per requirement of site all as specified and directed . | 150 | RM | |
14 | 14 | Taking out unserviceable cable any type/size from trenches, pole, road, duct etc including necessary joints, unserviceable fittings and pipes etc complete all as directed. | 2150 | RM | |
15 | 15 | Dismantling of ACSR from over head lines service feeder or distributor span and removing the same complete all as directed. | 2 | Qtl | |
16 | 16 | Supply and fixing of LT overhead lines on existing poles with XLPE insulated aerial bunched cable 4 Core x 10 Sqmm with guard wire with connecting fixing accessories like hook, end joint, thimbling, tapping connetion, insulation piercing connectors all etc complete as specified and directed . | 1500 | RM | |
17 | 17 | Supply and fixing of LT overhead lines on existing poles with XLPE insulated aerial bunched cable 3 Core x 50 Sqmm + 1 Core x 35 Sqmm with guard wire with connecting fixing accessories like hook, end joint, thimbling, tapping connetion, insulation piercing connectors all etc complete as specified and directed . | 350 | RM | |
18 | 18 | Supply and fixing of LT overhead lines on existing poles with XLPE insulated aerial bunched cable 3 Core x 70 Sqmm + 1 Core x 50 Sqmm with guard wire with connecting fixing accessories like hook, end joint, thimbling, tapping connetion, insulation piercing connectors all etc complete as specified and directed . | 350 | RM | |
19 | 19 | Supply and fixing of LT overhead lines on existing poles with XLPE insulated aerial bunched cable 3 Core x 95 Sqmm + 1 Core x 70 Sqmm with guard wire with connecting fixing accessories like hook, end joint, thimbling, tapping connetion, insulation piercing connectors all etc complete as specified and directed . | 300 | RM | |
20 | 20 | Disconnecting and taking out old existing unserviceable wire and supply & fixing in replacement PVC round insulated and sheathed two core aluminium conductor stranded cable 2.5 Sqmm 1100 volt to be replaced in existing fittings complete all as specified and directed by Engr-in-charge (for street light to junction box) | 1500 | RM | |
21 | 21 | Dismantling of unserviceable steel tubular poles any size and removal from site including making good disturbed ground complete.all as specified and directed | 20 | Each | |
22 | 22 | Supplying, transporting, erecting and fixing Steel tubular swaged poles type 410 SP-31 ( 9.0 metres long) complete with cast iron base plate, finial, taper plug, bolts, nuts and screws as specified, including necessary excavation and earth work , PCC 1:4:8 type D2 in foundations below pole, PCC 1:3:6 type C2 around poles and PCC 1:3:6 type C1 as in plinth block , disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, painting steel tubular poles exposed surafces with Aluminium paint two coats over one coat of red oxide primer and providing 300 mm wide bands (3 bands/ straps with synthetic enamel paint and 2 bands with Black bituminous paint ) from plinth block and numbering of poles , painting embedded portion of poles with one coat of bituminous paint complete all as specified and directed. | 10 | Each | |
23 | 23 | Supplying, transporting and erecting in position steel tubular swaged poles 410-SP-55 type, 11.00 M long complete with mild steel base plate, CI finial taper , bolts, nuts and washers etc. including necessary excavation and earth work , PCC 1:4:8 type D2 in foundations below pole, PCC 1:3:6 type C2 around poles and PCC 1:3:6 type C1 as in plinth block , disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, painting steel tubular poles exposed surafces with Aluminium paint two coats over one coat of red oxide primer and providing 300 mm wide bands (3 bands/ straps with synthetic enamel paint and 2 bands with Black bituminous paint ) from plinth block and numbering of poles , painting embedded portion of poles with one coat of bituminous paint complete all as specified and directed. | 10 | Each | |
24 | 24 | M&L PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in foundation of poles. | 0.5 | Cum | |
25 | 25 | M&L for PCC 1:3:6 type C1 using 40mm graded stone aggregate as in copping/collar of poles and foundation of stay assembly etc complete all as specified and directed. | 1 | Cum | |
26 | 26 | M&L for PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in copping of poles. | 0.5 | Cum | |
27 | 27 | M&L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground.(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr. Below ground level connecting to GI Strip 25X4 mm dia size by means of bolts, check nuts and washers of GI and earth wire protected by provision of GI pipe light grade, 15 mm bore including provn of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded crushed stoned aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25 x3mm with lughs 2 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge plate, common salt and charcoal filling, test pont made out of phosphorous bronze with fixing arrangement, funnel, wiremesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtr, all as per electrical plate No 3 of SSR 2009 Part-I and connection all as specified and testing on completion. | 10 | Each | |
28 | 28 | Supply and fixing for replacement of LT pole cross arms, bracing supports clamps from structural steel sections including nuts, bolts, washers welding, bending cold or hot, drilling holes for bolts in any shape or size complete as directed including preparation of surface and painting two coats of aluminium paint over of coat of red oxide primer. | 2 | Qtl | |
29 | 29 | S&F in replacement of existing unserviceable light fittings bracket incl FI clamps of any description and in any position and supplying and fixing brackets made out of 40mm dia medium grade GI pipe 1 mtr long bent to shape and size fixed on location using new 30x5mm FI clamps made to shape incl nuts, bolts & washers complete all as specified and directed | 20 | Each | |
30 | 30 | Supply & fixing in replacement of light grade, 40mm dia GI tubing with all fittings fixed on walls/poles/in trenches as in earth lead protection pipe all as specified & directed | 20 | RM | |
31 | 31 | M&L for replacement of cable junction box weather proof for outdoor installation with hook out for cable entry of size 130x130x77mm IP-65 of size 167/125/82 includes cable gland cable connection terminal complete. Make : Hansel, Cat Part No K9105 or equivalent in Sintex/legrand as approved by the GE | 40 | Each | |
32 | 32 | Dismantling of old rusted steel continuous earth wire and removal from site complete all as directed | 2 | Qtl | |
33 | 33 | Supply and fixing steel continuous earth wire galvanised steel wire and cradle guard 3.15 or 4 mm dia, complete all as per specified and directed | 2 | Qtl | |
34 | 34 | Taking out unserviceable HT UG cable of 11/33KV grade, any size duly finding of fault from trenches, pole, road, duct etc including necessary joints, unserviceable fittings and pipes etc complete all as specified and directed | 600 | RM | |
35 | 35 | Supplying, laying or fixing, jointing and testing 11 KV (E) system , Crossed linked polyethylene ( XLPE) insulated, screened , PVC bedded, galvanised steel strip or wire armoured, electric power cables( heavy duty) ISI-7098 Mark, with aluminium conductor multi stranded , cross sectional area 120 Sqmm 3 Core complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles etc including provision of cable path indicator at every 50 Metre distance of cable complete all as specified and directed.\n\n | 600 | RM | |
36 | 36 | Supply and fix HT overhead lines on existing poles with XLPE insulated aerial bunched cable 3 Core x 95 Sqmm + 1 x 70 Sqmm as guard wire including end hook joint, holding clamps for fixing on poles all etc complete as per site requirement as directed by Engr-in-charge | 650 | RM | |
37 | 37 | S&F cable jointing kit for 11KV (earthed) grade cable for outdoor termination (end joint) heat shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured aluminium conductor cable of size upto 95 Sqmm including taking down old joint completed all as specified and directed. Make : Dension/MS-Seal/Fontech as approved by the GE. | 2 | Each | |
38 | 38 | S&F cable jointing kit for 11KV (earthed) grade cable for indoor termination (end joint) heat shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured aluminium conductor cable of size upto 95 Sqmm including taking down old joint completed all as specified and directed. Make : Dension/MS-Seal/Fontech as approved by the GE. | 2 | Each | |
39 | 39 | S&F cable jointing kit for 11KV (earthed) grade cable for outdoor termination (end joint) heat shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm including taking down old joint completed all as specified and directed. Make : Dension/MS-Seal/Fontech as approved by the GE. | 3 | Each | |
40 | 40 | S&F cable jointing kit for 11KV (earthed) grade cable for indoor termination (end joint) heat shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured aluminium conductor cable of size 120 Sqmm upto 185 Sqmm including taking down old joint completed all as specified and directed. Make : Dension/MS-Seal/Fontech as approved by the GE. | 3 | Each | |
41 | 41 | S&F cable jointing kit for 11KV (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm including taking down old joint completed all as specified and directed. Make : Dension/MS-Seal/Fontech as approved by the GE. | 4 | Each | |
42 | 42 | M&L for 50mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, complete all as specified and directed including clamps, nut bolts and washers incl taking down old pipe completed all as specified and directed | 18 | RM | |
43 | 43 | Boring under road and foot path for inserting 50mm bore GI tubing for drawing UG cable, complete all as per specified and directed | 6 | RM | |
44 | 44 | M&L for 80mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, complete all as specified and directed including clamps, nut bolts and washers incl taking down old pipe completed all as specified and directed | 18 | RM | |
45 | 45 | Boring under road and foot path for inserting 80mm bore GI tubing for drawing UG cable, complete all as per specified and directed | 6 | RM | |
46 | 46 | Dismantling old unserviceable stay assembly complete including necessary excavation and demoltion of concrete and removal from site complete all as specified and directed | 3 | Each Set | |
47 | 47 | Supply and fixing on HT pole stay assembly complete with accessories shown in electrical plate No.1 with stay rod of 20mm including loop insulator suitable for 11 KV (Size 90x140mm) with clearance of hole 25.5mm and MS stay plate size 300x300x6mm stay clamps etc complete all as specified and directed. | 3 | Each Set | |
48 | 48 | M&L for preparation of old painted surfaces of MS channels, MS structures of power distribution system installed at Main Receiving Station after cleaning the complete body surface by rubing with emery paper to remove old paint,dust etc and applying two coats of aluminium paint on the pole including painting of GODs, DO switches all etc complete by taking proper shut down from Engr-in-charge all as specified and directed by Engr-in-charge. | 1 | Each Job | |
49 | 49 | Supply, installation, testing and commissioning of 11 KV drop out fuse 'D' type complete with all accessories as specified and directed by Engr-in-charge | 2 | Each Set | |
50 | 50 | Dismantling of unserviceable/damaged MCCB of any type/size and removal from site. | 2 | Each | |
51 | 51 | M&L for cable rounte indicators made of precast PCC block 1:2:4 of size 300x75x450mm painted with synthetic enamel paint of approved colour and with letters written "MES U/G CABLE" & fixed to ground 200mm depth all etc complete as specified and directed by Engr-in-charge | 100 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail