}

Construction Of Auditorium In Adilabad Municipality., ADILABAD-Telangana

Municipalities-M has published Construction Of Auditorium In Adilabad Municipality.. Submission Date for this Tender is 08-02-2021. Auditorium Construction Tenders in ADILABAD Telangana. Bidders can get complete Tender details and download the document.




Tender Notice

26643175
Construction Of Auditorium In Adilabad Municipality.
Open Tender
Indian
Telangana
ADILABAD
08-02-2021

Tender Details

Construction Of Auditorium In Adilabad Municipality.

Key Value

Document Fees
Refer document
EMD
INR 402599.0 /-
Tender Value
INR 4.02 Crore /-

BOQ Items

S.No Subwork Name Specification Number Quantity UOM Rate(INR) Amount(INR)
1 Auditorium As per department / standard specifications 713.21 1 Cum 105.95 75565.00
(1). Civil Items RBR-FNDN-1 B Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means.
2 Auditorium As per department / standard specifications 133.73 1 Cum 220.84 29533.00
RBR-FNDN-1 (I)A Earth work excavation for foundations (Manual Means) of buildings in ordinary rock ( not requiring blasting ) and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges as per SS 20 B(APSS 308) up to 3.0 depth
3 Auditorium As per department / standard specifications 44.58 1 Cum 315.49 14065.00
RBR-FNDN-1(II) Earthwork excavation in ordinary rock blasting not required for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per specification drawings and as directed by the departmental officer including all incidental and operational charges etc., complete
4 Auditorium As per department / standard specifications 60.86 1 Cum 4087.91 248790.00
BLD-CSTN-2-5 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING
5 Auditorium As per department / standard specifications 67.88 1 Cum 3530.89 239677.00
BLD-CSTN-4-9 Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard Granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., to site, labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing and cost of overheads & contractors profit etc.,complete for finished item of work in foundation and basement. (APSS No. 601 & 615).
6 Auditorium As per department / standard specifications 49.19 1 Cum 4035.40 198501.00
BLD-CSTN-4-3 Coursed Rubble stone masonry in 2nd sort in CM (1:6) prop: (cement : sand) using hard granite stones from approved quarry including cost and conveyance of all materials like cement, sand water, granite stones, etc., from approved quarry to site and including labour for cutting stones to required size and shape, mixing of cement, mortar, construction, scaffolding charges, curing etc., and overheads & contractors profit, complete for finished item of work in foundation & basement. (APSS No. 615 & 601)
7 Auditorium As per department / standard specifications 182.30 1 Cum 9170.65 1671809.00
BLD-CSTN-2-14(A) Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR FOOTINGS, PEDESTALS, PLINTH BEAMS. (i). For Footings.
8 Auditorium As per department / standard specifications 27.84 1 Cum 9749.18 271417.00
BLD-CSTN-2-14(A) Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR FOOTINGS, PEDESTALS, PLINTH BEAMS. (ii). For Pedastals for column footings
9 Auditorium As per department / standard specifications 69.92 1 Cum 11696.08 817790.00
BLD-CSTN-2-14(A) Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR FOOTINGS, PEDESTALS, PLINTH BEAMS. (iii). For Plinth beams.
10 Auditorium As per department / standard specifications 39.40 1 Cum 12156.87 478981.00
BLD-CSTN-2-14 (B) Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. (a). Footing top to Plinth beam bottom.
11 Auditorium As per department / standard specifications 74.08 1 Cum 12671.34 938693.00
BLD-CSTN-2-14 (B) Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. (ii). Plinth beam top to 4.20m level. Plinth beam top to Roof beam bottom
12 Auditorium As per department / standard specifications 20.57 1 Cum 13343.99 274486.00
BLD-CSTN-2-14 (B) Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. (iii). above 4.20m to 6.85m
13 Auditorium As per department / standard specifications 2.84 1 Cum 12156.87 34526.00
BLD-CSTN-2-14(B) Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.
14 Auditorium As per department / standard specifications 97.30 1 Cum 12270.03 1193874.00
BLD-CSTN-2-14(C) Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. (a). Roof beams @ 4.20m level.
15 Auditorium As per department / standard specifications 210.80 1 Cum 13273.84 2798125.00
BLD-CSTN-2-14(C) Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Beams at 6.85 m Lvl
16 Auditorium As per department / standard specifications 29.40 1 Sqm 1099.52 32326.00
BLD-CSTN-2-14(C) Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. For Sunshade.
17 Auditorium As per department / standard specifications 1305.12 1 Sqm 1624.34 2119959.00
BLD-CSTN-2-14(C) Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. For Slabs 150mm thick a). 4.20m ht
18 Auditorium As per department / standard specifications 1277.20 1 Sqm 1737.92 2219671.00
BLD-CSTN-2-14(C) Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. For Slabs 150mm thick b). 6.85m ht
19 Auditorium As per department / standard specifications 35.88 1 Sqm 1874.61 67261.00
BLD-CSTN-2-14(C) Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. For Slabs 150mm thick viii). Slab-200mm th
20 Auditorium As per department / standard specifications 55384.86 1 Kg 65.78 3643216.00
BLD-CSTN-2-19 Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)
21 Auditorium As per department / standard specifications 40982.80 1 Kg 66.96 2744208.00
BLD-CSTN-2-19 Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) above 4.2m
22 Auditorium As per department / standard specifications 1528.36 1 Cum 270.00 412657.00
RBR-FNDN-2 Filling with carted gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operational,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).
23 Auditorium As per department / standard specifications 269.23 1 Cum 5544.01 1492614.00
Brick Masonry with 2nd class traditional size 23 x 11 x 7cms Bricks in CM (1:6) prop having a crushing strength of not less than 35.00kg/cm2 including cost and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as scaffolding mixing mortor constructing masonary lift charges, curing etc. complete for finished item of work as per BLD-CSTN-3-1
24 Auditorium As per department / standard specifications 88.22 1 Cum 6311.20 556774.00
Brick Masonry with 2nd class traditional size 23 x 11 x 7cms Bricks in CM (1:6) prop having a crushing strength of not less than 35.00kg/cm2 including cost and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as scaffolding mixing mortor constructing masonary lift charges, curing etc. complete for finished item of work as per BLD-CSTN-3-1 Above 3.66m to 6.85m
25 Auditorium As per department / standard specifications 128.15 1 Sqm 709.50 90922.00
11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, including conveyance charges of materials.
26 Auditorium As per department / standard specifications 183.60 1 Sqm 818.66 150306.00
11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, including conveyance charges of materials. Above 3.66M Height
27 Auditorium As per department / standard specifications 32.10 1 Rmt 7759.81 249090.00
Manufacturing, supply and errection of Stainless steel hand rails using 60.30mm dia, 2.90mm thick Mirror polished Seamless tubes with two horizontal rails and verticle posts spaced not more than 1.0 m as directed by departmental officers, including fabrication buffing, polishing, lacquer finishing, welding with stainless steel welding rods and transportation to site, fixing with 100mm dia 8mm thick SS base plate including cost and conveyance of all materials, SS welding rods, fabrication charges, and labour charges for fixing in position and all other incidental and operational charges etc., complete for finished item of work.
28 Auditorium As per department / standard specifications 801.09 1 Sqm 438.25 351078.00
Plastering to external walls in 20mm thick in two coats with base coat of 16mm thick in C.M. (1:6) and topcoat of 4mm thick in C.M (1:4) with dubara sponge finishing including cost & conveyance of all materials like cement, Sand,. Water, etc., to site cost of all operational, incidental charges, labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves where ever necessary etc., complete for finished item of work for uneven surface of walls, (As per SS 904) For External walls
29 Auditorium As per department / standard specifications 610.93 1 Sqm 450.81 275413.00
Plastering to external walls in 20mm thick in two coats with base coat of 16mm thick in C.M. (1:6) and topcoat of 4mm thick in C.M (1:4) with dubara sponge finishing including cost & conveyance of all materials like cement, Sand,. Water, etc., to site cost of all operational, incidental charges, labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves where ever necessary etc., complete for finished item of work for uneven surface of walls, (As per SS 904) above 3.66m to6.85m
30 Auditorium As per department / standard specifications 2120.63 1 Sqm 425.17 901628.00
BLD-CSTN-6-10 Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) Internal walls
31 Auditorium As per department / standard specifications 847.31 1 Sqm 437.73 370893.00
BLD-CSTN-6-10 Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) above 3.66m to6.85m
32 Auditorium As per department / standard specifications 464.45 1 Sqm 425.17 197470.00
BLD-CSTN-6-10 Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) (i). ceiling @4.2m Lvl
33 Auditorium As per department / standard specifications 1220.43 1 Sqm 437.73 534219.00
BLD-CSTN-6-10 Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) at 6.85m Lvl
34 Auditorium As per department / standard specifications 1.00 1 No. 67834.02 67834.00
Supply and Fixing of Main Door with Double leaf shutters, of size 2.00x2.10m Door with Teak wood Frame of sections size 100mm x 125mm with Door Shutter 50mm thick teak wood including cost of fixtures such as Brass Tower Bolts 200mm long 4 Nos, ,Brass Handles 150mm long 4 Nos, 300mm long Brass Aldrops 2No, 150mm long Brass butt hinges 6Nos, Brass Door stopper 2 Nos, MS Hold fasts 8Nos 230mm long , including cost and convenyance of all materials to site all Labour charges such as Fixing of Door Frame and shutter in position , with Hardware fixtures etc., complete for finsihed item of work. MD door size 2.0x2.10m
35 Auditorium As per department / standard specifications 5.00 1 No. 67834.02 339170.00
Supply and Fixing of Main Door with Double leaf shutters, of size 2.00x2.10m Door with Teak wood Frame of sections size 100mm x 125mm with Door Shutter 50mm thick teak wood including cost of fixtures such as Brass Tower Bolts 200mm long 4 Nos, ,Brass Handles 150mm long 4 Nos, 300mm long Brass Aldrops 2No, 150mm long Brass butt hinges 6Nos, Brass Door stopper 2 Nos, MS Hold fasts 8Nos 230mm long , including cost and convenyance of all materials to site all Labour charges such as Fixing of Door Frame and shutter in position , with Hardware fixtures etc., complete for finsihed item of work. D Door 2.0x2.1m
36 Auditorium As per department / standard specifications 6.00 1 No. 8508.72 51052.00
Supply and Fixing of single leaf shutter, Door Size 0.90x2.10 mtrs with salwood Frame of sections size 75mm x 100mm with Flush Door Shutter Solid Bond Wood block board type with commercial ply on both faces of 35mm thick including cost of fixtures such as MS Powder coated Tower Bolts 150mm long 1 Nos, MS Powder coated Handles 150mm long 2 Nos, 300mm long MS Powder coated Aldrops 1No, 125mm long M.S.Powder Coated butt hinges 3Nos, 300 mm long MS Powder coated Flat latch 1No, Door stopper 1 Nos, MS Hold fasts 3 Nos 230mm long , cost and convenyance of all materials to site all Labour charges such as Fixing of Door Frame and shutter in position , with Hardware fixtures etc., complete for finsihed item of work. D Door 2.0x2.1m
37 Auditorium As per department / standard specifications 36.00 1 Sqm 8262.08 297435.00
Supply and fixing of Pre Laminated Cement Bonded Particle Board (as per IS-14276) WINDOWS with Pre-Painted Steel Sections fabricated from pre-painted Cold rolled formed sections made of galvanized steel color coated sections {Base steel as per 15-512 quality, galvanized as per IS-277 with Zinc of 120 gram/sqm) with total coated thickness of 0.58mm primer coated with epoxy primer of 5-7 microns thick, finish painted with polyester paint of 12-16 microns and back coated with alkyd backer of 5-7 microns), the sections for outer frame and centre mullion (duly filled with PU form of 40 kg/Cum) should be of 60mm x 50mm , with provision for fixing glazed shutter. The section for glazed/paneled shutter should be of size 48mm x 25 mm and another section of size 60mm x 23mm should be provided for separating glazed and paneled portion 5 mm thick colour pin headed glass is to be provided for glazing and providing guard bars of 10mm square rods duly welded at 150mm pitch to MS flat section of size 18mm and 3mm thick. Windows are to be fixed to wall by means of self expansion nylon Cap (75) and electroplated wooden screws of size 100mm, including aluminum powder coated fittings, A) 75mm long grip handles 1 no per shutter, B) 75 mm long tower bolts 2 nos. per shutter, C) Heavy duty 55 Pivot hinges 2 nos per shutter, D) MS Powder coated telescopic stay 1no per shutter. Pre Laminated Cement Bonded Particle Board (as per IS-14276) WINDOWS WITH PPS SECTIONS ? Double shutter 4\0"x4\0" outer frame section size of 50mm x 60mm shutter frame section size of 48mm x 25mm Mullion section size of 50mm x 60mm for outer frame including cost and conveyance all material, labour charges for Fixing of all fixtures .etc complete. Window 1.50x1.2m
38 Auditorium As per department / standard specifications 10.00 1 No. 4810.38 48104.00
Supply and fixing door shutter with frame made out of PVC section and panels conforming to IS:10151-1982 having panel sizes of 100 mm x 30 mm with self extruded grooves at 40 mm x 50 mm grooves on front face and the infill panel dimension is 610 mm x 20 mm seamless hallow multi chambered PVC single panel for finished item of work.including cost & conveyance of Materials,labour charges for fixing of door , all fixtures etc. completed. toilet doors 0.75*2.10m
39 Auditorium As per department / standard specifications 4.50 1 Sqm 4759.33 21417.00
Providing and fixing of louvered Ventilators made ofpre-painted steel as per IS 513 of 0.80 mm thickgalvanized as per IS 277 with a polyester paint with andfitted with 4 mm thick plain float glass including fixingthe frames in concrete/masonry wall by means of selfexpanding screws, etc., complete for finished item ofwork for (i) Single fixed Louvers Ventilator size of 2? 0? x 2? 0? (609.6 x 609.6mm) outer frame box section sizeof 80 x 45mm and (ii) Double fixed Louvers ventilator Size of 4? 0? x 2? 0? (1219.2mm x 09.6mm) outer frame box section size of 80 x 45mm, vertical mullion section size of 80 x 60 mm and (iii) Double fixed LouversVentilator size of 4?0? x 3?0? (1219.2mm x 914.4mm outer frame box section size of 80 x 45mm , Vertical mullion section size of 80 x 60 mm including all material, Labour chargesfor fixing of ventilator, all fixtures etc.com Ventilators-V 0.75x 0.60m
40 Auditorium As per department / standard specifications 3704.60 1 Sqm 210.79 780896.00
Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, over heads and contractors profit etc., complete for finished item of work in all floors Quantity of internal, ceiling plastering
41 Auditorium As per department / standard specifications 1412.02 1 Sqm 394.46 556985.00
Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plasteredsurface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - excluding cost of access scaffolding Qty of -external plastering
42 Auditorium As per department / standard specifications 1412.02 1 Sqm 214.79 303288.00
BLD-CSTN-10-5 - Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls Qty of -external plastering
43 Auditorium As per department / standard specifications 3704.60 1 Sqm 119.15 441403.00
BLD-CSTN-10-1 Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls,ceiling Quantity of internal, ceiling plastering
44 Auditorium As per department / standard specifications 61.79 1 Sqm 979.64 60532.00
BLD-CSTN-7-20 Skirting with vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designof any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707)
45 Auditorium As per department / standard specifications 584.48 1 Sqm 993.99 580967.00
BLD-CSTN-7-5 Flooring with vitrified tiles Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including charges, etc., complete for finished item of work, including the cost of conveyance of all materials.
46 Auditorium As per department / standard specifications 98.10 1 Sqm 1028.09 100856.00
BLD-CSTN-7-5 Flooring with vitrified tiles Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including charges, etc., complete for finished item of work, including the cost of conveyance of all materials. First Floor (Above 3.66m height)
47 Auditorium As per department / standard specifications 683.40 1 Sqm 382.16 261168.00
Gronolithie Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, sand and water etc., complete, complete for finished item of work, including the cost of conveyance of all materials Auditorium(sloped slab) tread
48 Auditorium As per department / standard specifications 84.42 1 Sqm 608.04 51331.00
Gronolithie Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, sand and water etc., complete, complete for finished item of work, including the cost of conveyance of all materials First Floor (Above 3.66m height)
49 Auditorium As per department / standard specifications 166.50 1 Sqm 604.42 100636.00
Flooring with 25mm thick polished shabad stones set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including labour charges for dressing of flooring stones etc., complete for finished item of work, including the cost of conveyance of all materials.
50 Auditorium As per department / standard specifications 73.08 1 Sqm 170.06 12428.00
BLD-CSTN-10-12 Painting to new Wood works with 2 coats of Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over 1 coat of Red Oxide Primer Paint for iron works of Grade -1 of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site including cost of primer coat and all operational, incidental, labour charges etc. complete etc., complete including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.
51 Auditorium As per department / standard specifications 155.23 1 Sqm 1129.36 175311.00
BLD-CSTN-7-22 Dadooing to walls with glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, overheads & contractors profit etc., to site, cost of all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.
52 Auditorium As per department / standard specifications 53.45 1 Sqm 1047.74 56002.00
BLD-CSTN-7-6 Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including charges, etc., complete for finished item of work, including the cost of conveyance of all materials.
53 Auditorium As per department / standard specifications 151.80 1 Kg 79.53 12073.00
Supply and fixing of M.S frame with 35x35x5 mm of M.S angle outer side and 25x25x5mm MS angle 2nos horizontally, 2nos vertically fixing with Toughened plain glass 5mm thick in between angles and painting with two coates of Synthatic enamel paint over metal primary for MS angles including cost and covneyance of all materials, Fabrication, Fixing charges etc complete for finished item of work.
54 Auditorium As per department / standard specifications 532.51 1 Sqm 3618.64 1926962.00
Perforated wall panels channelled wood works sheets of width 128 mm, thickness of 16mm and length 2440 mm made of a high density particle board substrate with a laminated facing as per the approved shade/ species & finish and a melamine balancing layer on the reverse side, with a special perforation pattern fluted perforation on the visible surface with a minimum sag resistance of RH90 and a fire rating class of 1 as per Part 7 of BS 476 with a ?tongue-and-grooved? edges and the back of the erforated panel is with sound absorbing nonwoven acoustical fleece including cost & conveyance of material , Labour charges including fixing charges etc.com
55 Auditorium As per department / standard specifications 948.22 1 Sqm 2824.21 2677973.00
Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per Idia Gypsum Ltd specification. Inside Auditorium (45.5*20.84)
56 Auditorium As per department / standard specifications 10.00 1 No. 1491.76 14918.00
(2). Water Supply & Sanitary Items. Supplying & fixing approved make Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556- Part-3-2004 with "P" or "S" trap: 580 mm x 440 mm parryware/Nycer/Hindware etc., complete.
57 Auditorium As per department / standard specifications 10.00 1 No. 1758.76 17588.00
Supply and fixing 10 liters capacity PVC low level flushing tank white colour of SLIM LINE or equivalent from approved manufacturers with all internal components, necessary length of pipe with all accessories including etc., complete for finished item of work;
58 Auditorium As per department / standard specifications 3.00 1 No. 1147.54 3443.00
Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader fixed with screws complete Indian make : 590 x 375 x 390 mm (Parry/Nicer) including Waste Plug, 32mm dia PVC waste pipe etc, complete for finished item.
59 Auditorium As per department / standard specifications 3.00 1 No. 2272.65 6818.00
Supplying and fixing of 450mm x 900mm (1.5\ x 3\ 0") size, both sides Polished granite urinal partitions of black colour granite slabs of 20mm thick, grouted with cement mortar (1:3), including neat cement slurry and jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand, water and tilesetc., complete, including seigniorage charges, labour charges for dressing of tiles, full rounding of edges etc., complete for finished item of work.
60 Auditorium As per department / standard specifications 6.00 1 No. 1676.96 10062.00
Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock
61 Auditorium As per department / standard specifications 16.00 1 No. 811.30 12981.00
S&F of 15 mm CP finish brass stop valve of not less than 400 grams weight quarter turn spindle with internal threaded conforming to IS 8931 with 7 years warranty: including cost and conveyance of all materials to the site, all labour charges, etc., complete for finished item of work and as directed by the Engineer/ In-Charge.
62 Auditorium As per department / standard specifications 21.00 1 Rmt 210.22 4415.00
Supplying,laying,jointing and testing of medium quality GI pipes with specials such as tees, elbows, checknuts, unions, reducing tees etc., including threading,cutting and fixing in wall ceiling, floors, etc., The rate shall include the rate for necessary excavation in trenches, chasing the walls etc., refilling, consoldation with the excavated earth and making bores in foundation, walls, ceiling etc., and making good of the chased surface in cement mortor including etc.,complete for finished item of work. (a). 15mm Dia
63 Auditorium As per department / standard specifications 32.00 1 Rmt 233.00 7456.00
Supplying,laying,jointing and testing of medium quality GI pipes with specials such as tees, elbows, checknuts, unions, reducing tees etc., including threading,cutting and fixing in wall ceiling, floors, etc., The rate shall include the rate for necessary excavation in trenches, chasing the walls etc., refilling, consoldation with the excavated earth and making bores in foundation, walls, ceiling etc., and making good of the chased surface in cement mortor including etc.,complete for finished item of work. (b). 20mm Dia
64 Auditorium As per department / standard specifications 40.00 1 Rmt 305.68 12227.00
Supplying,laying,jointing and testing of medium quality GI pipes with specials such as tees, elbows, checknuts, unions, reducing tees etc., including threading,cutting and fixing in wall ceiling, floors, etc., The rate shall include the rate for necessary excavation in trenches, chasing the walls etc., refilling, consoldation with the excavated earth and making bores in foundation, walls, ceiling etc., and making good of the chased surface in cement mortor including etc.,complete for finished item of work. (c). 25mm Dia
65 Auditorium As per department / standard specifications 50.00 1 Rmt 428.36 21418.00
Supplying,laying,jointing and testing of medium quality GI pipes with specials such as tees, elbows, checknuts, unions, reducing tees etc., including threading,cutting and fixing in wall ceiling, floors, etc., The rate shall include the rate for necessary excavation in trenches, chasing the walls etc., refilling, consoldation with the excavated earth and making bores in foundation, walls, ceiling etc., and making good of the chased surface in cement mortor including etc.,complete for finished item of work. (d). 32mm Dia
66 Auditorium As per department / standard specifications 60.00 1 Rmt 515.83 30950.00
Supplying,laying,jointing and testing of medium quality GI pipes with specials such as tees, elbows, checknuts, unions, reducing tees etc., including threading,cutting and fixing in wall ceiling, floors, etc., The rate shall include the rate for necessary excavation in trenches, chasing the walls etc., refilling, consoldation with the excavated earth and making bores in foundation, walls, ceiling etc., and making good of the chased surface in cement mortor including etc.,complete for finished item of work. (e). 50mm Dia
67 Auditorium As per department / standard specifications 16.00 1 No. 438.56 7017.00
S&F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type, the following valves with SS Ball and SS Spindle of approved brand of manufacature,having rubber lining, including companion flanges, unions, bolts, nuts,rubber gasket , ctc., complete for finished item of work. (a). 25mm Dia for Control on maintanance
68 Auditorium As per department / standard specifications 10.00 1 No. 777.18 7772.00
S&F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type, the following valves with SS Ball and SS Spindle of approved brand of manufacature,having rubber lining, including companion flanges, unions, bolts, nuts,rubber gasket , ctc., complete for finished item of work. (b). 32mm Dia for Control on maintanance
69 Auditorium As per department / standard specifications 2.00 1 No. 1607.65 3215.00
S&F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type, the following valves with SS Ball and SS Spindle of approved brand of manufacature,having rubber lining, including companion flanges, unions, bolts, nuts,rubber gasket , ctc., complete for finished item of work. (c). 50mm Dia for Control on maintanance
70 Auditorium As per department / standard specifications 216.00 1 Rmt 162.09 35011.00
Supply and fixing PVC pipes of confirming to IS Standareds with fittigs, including , offsets, doorbends, junctions, cowls, etc., laid on walls with necessary clamps, including wall bores & rendering the same in cement morter etc., and complete. (a). 75 mm dia 3 M Single Socket PVC/SWR pipe - 6 Kg/sq.cm
71 Auditorium As per department / standard specifications 102.00 1 Rmt 310.17 31637.00
Supply and fixing PVC pipes of confirming to IS Standareds with fittigs, including , offsets, doorbends, junctions, cowls, etc., laid on walls with necessary clamps, including wall bores & rendering the same in cement morter etc., and complete. (b). 110 mm dia 3 M Single Socket PVC/SWR pipe - 6 Kg/sq.cm
72 Auditorium As per department / standard specifications 88.00 1 No. 121.57 10698.00
Sanitary PVC Fittings - 87.5 Degree Door Bends (a). 110 mm dia - Door Bend 87.5 Degree
73 Auditorium As per department / standard specifications 108.00 1 No. 76.12 8221.00
Sanitary PVC Fittings - 87.5 Degree Door Bends (b). 75 mm dia - Door Bend 87.5 Degree
74 Auditorium As per department / standard specifications 19.00 1 No. 153.41 2915.00
Supply and fixing of PVC Nahani trap 1st quality ISI marked conforming to IS:1729-1979 with C.P grating fixing with white cement as per site requirements with standard practice for 100mm dia inlet - 75mm (3") out let pippe 4kgs make with aluminium grating in cement concrete including cost and conveyance of all material to site, all labour charges, , etc., complete.
75 Auditorium As per department / standard specifications 22.00 1 No. 246.54 5424.00
Boxing of Nahany traps in RCC floors including cost and conveyance of all material like Bricks, Cement, Sand etc., to site, all labour charges, , etc., complete.
76 Auditorium As per department / standard specifications 10.00 1 No. 21.59 216.00
Supplying and fixing of PVC cowls of approved make of 110 mm dia complete etc.
77 Auditorium As per department / standard specifications 16.00 1 No. 8358.66 133739.00
Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3\-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
78 Auditorium As per department / standard specifications 6.00 1 No. 13300.97 79806.00
Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5\-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
79 Auditorium As per department / standard specifications 200.00 1 Rmt 181.43 36286.00
Supply,fixing and testing of PVC SWR 4 KG/Sq.cm on wall surface pipe with necessary special like shoe and bends including providing holder clamps etc., complete as required by the engineer-in-charge for Rain Water Down Comer pipes - 110mm Dia.
80 Auditorium As per department / standard specifications 2000.00 1 Lit 8.03 16060.00
Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
81 Auditorium As per department / standard specifications 1.00 1 No. 401442.00 401442.00
Add septic pit+sump
82 Auditorium As per department / standard specifications 1400.00 1 Rmt 82.48 115472.00
BLD-ELEC-1.4.2- Supply and Fixing of 25mm dia 2mm thick heavy grade PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.
83 Auditorium As per department / standard specifications 800.00 1 Rmt 95.60 76480.00
BLD-ELEC-1.4.2 A- Supply and Fixing of 25mm dia 2mm thick medium grade P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with Metal deep box including all labour charges etc., complete.
84 Auditorium As per department / standard specifications 800.00 1 Rmt 88.10 70480.00
BLD-ELEC-1.4.1 b - Supply and Fixing of 20mm dia 1.5mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with Metal deep box including all labour charges etc., complete.
85 Auditorium As per department / standard specifications 40.00 1 No. 160.95 6438.00
BLD-ELEC-9.7.24 Supply and fixing of P.V.C fan hooks of 15mm dia M.S bar grouted in R.C.C slab with making the site as original incluidng fixing charges etc complete
86 Auditorium As per department / standard specifications 153.00 1 No. 794.54 121565.00
BLD-ELEC-2-1 One light point control by one Switch Wiring with three runs of 1.5 Sqm FRLS PVC insulated flexbie copper conductor cable as Phase ,neutral and earthing in the existing PVC conduct pipe with 6A modular type switch with anodised GI box and front plate and including all labour charges etc., complete for light point, call bell point and exhaust fan points etc complete. (Wires:- (Fionlex/Polycab/RPG/Havells) and swithches: Legarand Mossaic/ L&T/ Schnieder)
87 Auditorium As per department / standard specifications 25.00 1 No. 326.76 8169.00
BLD-ELEC 2.1.2 - Wiring with 2 of 14/0.3mm (1.0 Sq.mm) P.V.C. insulated F.R. flexible copper cable (ISI MARK) in existing pipe with 6A switch control and 3/2 pin sockets fixing on separate board including all labour charges etc., complete.
88 Auditorium As per department / standard specifications 25.00 1 No. 137.72 3443.00
BLD-ELEC 2.1.4 - Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
89 Auditorium As per department / standard specifications 25.00 1 No. 293.35 7334.00
BLD-ELEC -2.1.5- Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on decolam sheet covered board separate including earth connection and all labour charges etc., complete on wall.
90 Auditorium As per department / standard specifications 1000.00 1 Rmt 56.35 56350.00
BLD-ELEC-3.1.3 - Supply and run of 2 of 22/0.3mm (1.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.
91 Auditorium As per department / standard specifications 1000.00 1 Rmt 77.49 77490.00
Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.
92 Auditorium As per department / standard specifications 1000.00 1 Rmt 106.68 106680.00
BLD-ELEC-3.1.5 - Supply and run of 2 of 56/0.3mm (4.0 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.
93 Auditorium As per department / standard specifications 500.00 1 Rmt 45.90 22950.00
BLD-ELEC -3.1.1- Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.
94 Auditorium As per department / standard specifications 48.00 1 No. 2380.23 114251.00
BLD-ELEC -9.7.2- Supply and erecting ceiling fan with 3 blades and double ball bearing and with condensor A.C 250V. 50C/S OF 1200mm sweep completly errected in position with Resistance type regulator, canopy down rod upto 304.80mm in length is provided with hook/clamps nuts and bolts and 24/0. flexible copper wire etc., complete and pointed with lettering by enamel paint the Sr No. and date of errection including cost and conveyance of all materials and labour charges for finished item of work.
95 Auditorium As per department / standard specifications 25.00 1 No. 1978.33 49458.00
BLD-ELEC-9.7.36- Supply and erecting exhaust fan heavy duty 250V A.C 50 cycles 375mm (15") 1400 RPM with condensor and without regulator complete errected in position with necessary materials, fan motar with moiture proof treatment and "E" class insulation and painted with lattering by enamel paint the Sr. No. and date of errection including cost and conveyance of all materials and labour charges etc complete (Item No.9.7.20)
96 Auditorium As per department / standard specifications 80.00 1 No. 572.62 45810.00
BLD-ELEC-8.2.2- Supply and Fixing of 1x36/40W box type tube light luminaire with copper / VPIT Choke, condensor, starters etc., and 1No 36/40W tube etc., complete.with polyster filled haevy duty coper wound ballast, lock jtype holder, starters with holders & 4 mfd condensor duly wired for use on 250v. A.C supply and errected on varnished T.W block with flexible twin core 24/0.20mm wire & with necessary materials with one 40W flourescent tube including connections etc., complete & marking Sr.No. & date of errection & including cost and conveyance of all materials and labour charges etc , complete .
97 Auditorium As per department / standard specifications 2.00 1 No. 27820.91 55642.00
BLD-ELEC-4.4.5 - FLOOR DB: Supply and fixing of 4way VTPN vertical type Distribution board IP-43Protection double door arrangement on wall suitable for MCB\s in sheet steel enclosure fixed on suitable angle iron frame with 125A TPN MCCB 1no as incomer and 4No.s 32-63A TP MCB\s as outgoings including all connections cable entry box testing, earthing and labour charges for fixing on wall etc., complete (Legrand/L&T/GE/Siemens/ merlingerin/Schneider/ABB)
98 Auditorium As per department / standard specifications 30.00 1 Rmt 864.76 25943.00
BLD-ELEC Supply laying and testing of 1.1KV Grade XLPE Al Conductor,steel armoured Power cables as per specification.The rates quoted for laying shall include laying of cables either in cable trays or under ground cable trenches including excavation and back filling and providing route indicators at interval of 8M laying bricks etc Including termination with all accessories. (Make:Torrent/ Universal/CCI/Fortune Art EBXL/Nicco)
99 Auditorium As per department / standard specifications 2.00 1 No. 3937.33 7875.00
BLD-ELEC-5.1.1- Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia \B\ class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete
100 Auditorium As per department / standard specifications 1.00 1 No. 818028.00 818028.00
A) Supply, Transportation, erection and commissioning (Excluding Foundation) of 3 Phase, 415, 50Hz, water cooled multi cylinder diesel generator set with alternator of - - - KVA/ - - - - - KW out put contineous rating directly coupled Engine and Alternator with guard and mounted on a common base plate of Robust construction and complete without control panel having IP-52 protection, Acoustic Enclosure as per CPCB norms , sound absorbing material, t to restrict sound level up to 75 dB up to 1 mtr distance and as per CPCB norms etc as per following specifications mentioned below. A. Alternator : Kirloskar / Stamford / Crompton Greaves / Leroy Somer make. The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21. B.Diesel Engine : Kirloskar / Cummins / Mahindra & Mahindra Diesel Engine start, developing suitable -------------- BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give - - - - -KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc. 01. Exhaust pipe of required size and length with insulation or clading. 02. Diesel tank suitable for 8 to 12 Hours running capacity. 03. Residential Silencer.04. SMF Batteries with leads as per the Manufacturer standards C. AMF Control Panel:- AMF control panel shall be fabricated with 16SWG CRCA sheet shall be totally enclosed with dust and Vermin proof, floor mounted / wall mounted type and shall be comprising the following. 01. Voltmeter with selector switch. 02. 4 Pole MCCB incomer of ----------A rating of Schenieder / L&T make for EB and DG. 03. Ammeter with selector switch with CTs. 04. PF Meter and frequency Meter. 05. Indicator lamps (set Run, Load ON) with fuses. 06. KWH Meter of required rating. 07. Set of control fuses and current transformer. 08. Input Terminal board and output Terminal Board. 09. Battery charger with transformer rectifier unit. 10. Alternator supply air break contactor of L&T make. 11. Main supply air break contactor of L&T make. 12. Audio Visual announciation. 13. Main supply voltage set of control relays and timers with one mode selector switch, set of push buttons. 14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core 63KVA, 3 Phase, 415, 50Hz, 200BHP, water cooled multi cylinder diesel generator set with alternator of 63 KVA out put continous rating at 0.8 p.f, and Batteries.
101 Auditorium As per department / standard specifications 1.00 1 No. 3937.33 3937.00
Providing independent earthling by excavating a trench to a depth of 3 M in all soils, as per size specified in the Data, using 50mm dia \B\ class GI pipe of 3.0 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.
102 Auditorium As per department / standard specifications 500.00 1 No. 5850.00 2925000.00
Seat Chairs: Push Back System Centre distance (Arm-rest to Arm rest) shall be 21"/22"/23"optional as required. Sheet Metal: HRC sheet metal as per IS:1079 1994 Components: Type-0 All exposed & visible parts shall be painted Polyurethane: Density : 50 +/-5kg /M3 as per JIS K 6401Chair Mercury auditorium chairs : Upholstered with 3 layered foam laminated fabric, Seat sliding feature, HR polyurethane foam, CR steel side panels frames, Grouted to floor using anchors, P.U. Armrest with cupholder, Armrest cladding, Epoxy polyester powder coated.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail