Jammu Development Authority-JDA has published Landscaping And Beautification Of Retrieved Land Adjoining To Bahu Fort By Way Of Construction Of Green Tunnel Along Walk Ways , Open Air Theater , Viewing Deck , Musical Fountain , Platform For Protection Of Old Trees Etc . . Submission Date for this Tender is 08-02-2021. Auditorium Construction Tenders in Bahu Fort Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 05-Feb-2021 | Corrigendum | Other | 08-02-2021 |
Name of Work :- Landscaping and beautification of retrieved land adjoining to Bahu Fort by way of construction of green tunnel along walk ways, open air theater, viewing deck, musical fountain, platform for protection of old trees etc. | |||||
---|---|---|---|---|---|
Sl. No. | Particulars | Item Code / Make | Quantity | Units | |
1 | 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m\nin width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and\nramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as\ndirected: All Kinds of Soil | item code1 | 140 | Cum |
2 | 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed | item code2 | 46 | Cum |
3 | 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement: 5 coarse sand :10 graded stone aggregate 40mm nominal size) Crushed | item code3 | 41 | Cum |
4 | 4 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | item code4 | 4160 | Kg |
5 | 5 | Providing and fixing of See through Jali in Green tunnel along the track at both sides and top of tunnel with mild steel glavanzied (G.I) with dia of wire 4mm | item code5 | 841 | Sqm |
6 | 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) | item code6 | 102 | Cum |
7 | 7 | 12mm Cement plaster of mix: 1: 4 ( 1 cement : 4 fine sand) | item code7 | 1531 | Sqm |
8 | 8 | Dry random rubble masonry with hard stone in foundation and plinth Without bond stone ( Nallah) | item code8 | 17 | Cum |
9 | 9 | Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.\n | item code9 | 136 | Sqm |
10 | 10 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited\nlayer by ramming and watering, lead upto 50 m and lift upto 1.5 m. | item code10 | 116 | Cum |
11 | 11 | Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) | item code11 | 23 | Cum |
12 | 12 | Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 5 cm apart in either direction | item code12 | 151 | 100 Sqm |
13 | 13 | Supplying and stacking of well decayed cow dung manure at site including royalty (cow dung manure measured in stacks will be reduced by 8% for payment) | item code13 | 3 | Cum |
14 | 14 | 40 mm thick fine dressed and rubbed stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand), with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixture with pigment to match the shade of stone and pointing with the same mortar and curing complete. Red sand stone | item code14 | 71 | Sqm |
15 | 15 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | item code15 | 1 | Cum |
16 | 16 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab upto 0.5 sqm) Granite of any colour or shade 18mm thick | item code16 | 14 | Sqm |
17 | 17 | Providing and fixing of Fossil mint Sand Stone of minimun 25mm thick of Jaipur Rajsthan ( Size of stone 1'-0"x 2'-0" ) | item code17 | 14 | Sqm |
18 | 18 | Extra for Rangoli design on white marble at top platform as per the direction of Engineering Charge | item code18 | 200 | SFt |
19 | 19 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. | item code19 | 40 | 100 Sqm |
20 | 20 | Extra over item No. 14 for pre finished nosing in treads of steps of sand stone slab. as per the direction of Engineering Charge | item code20 | 60 | Mtr. |
21 | 21 | Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications | item code21 | 36 | Sqm |
22 | 22 | Fine dressing of the ground | item code22 | 36 | 100 Sqm |
23 | 23 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes\n | item code23 | 1097 | Kg. |
24 | 24 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | item code24 | 216 | Kg. |
25 | 25 | Providing and fixing precoated galvanized iron profile sheets (size, shapeand pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as perIS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of\nthe sheet and polyester top coat 15-18 microns. Sheet should haveprotective guard film of 25 microns minimum to avoid scratches duringtransportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling\n/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | item code25 | 109 | Sqm |
26 | 26 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture | item code26 | 176 | Sqm |
27 | 27 | Providing and fixing of false ceiling with ACP sheet under frame work of precoated sheet of roofing of viewing decks with self drilling screws complete job | item code27 | 109 | Sqm |
28 | 28 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments\netc. complete Size of tile 600x600 mm | item code28 | 80 | Sqm |
29 | 29 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) | item code29 | 22 | Cum |
30 | 30 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab over 0.5 sqm) Granite of any colour or shade 18mm thick | item code30 | 6 | Sqm |
31 | 31 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design\napproved by Engineer-in-Charge. Granite Work | item code31 | 37 | Mtr. |
32 | 32 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more | item code32 | 6146 | Kg. |
33 | 33 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. | item code33 | 167 | Sqm |
34 | 34 | Extra for brick work with common burnt clay bricks/cement concrete bricks in\nsuperstructure above plinth level upto floor five level | item code34 | 84 | Cum |
35 | 35 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer | item code35 | 547 | Sqm |
36 | 36 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking\nwith push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.\n 80x1.25 mm M.S. laths with 1.25 mm thick top cover | item code36 | 25 | Sqm |
37 | 37 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. | item code37 | 288 | Sqm |
38 | 38 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and\nstruts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) | item code38 | 6 | Cum |
39 | 39 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase. | item code39 | 8 | Mtr. |
40 | 40 | Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers: | item code40 | 50 | Kg. |
41 | 41 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 15 mm dia. nominal bore | item code41 | 100 | Mtr. |
42 | 42 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 20 mm dia. nominal bore | item code42 | 100 | Mtr. |
43 | 43 | Making connection of G.I. distribution branch with G.I. main of\nfollowing sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore\n | item code43 | 25 | Each |
44 | 44 | Providing and fixing brass bib cock of approved quality 15 mm nominal bore | item code44 | 5 | Each |
45 | 45 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS:4457, complete as per direction of Engineer-in-charge In flooring on a bed of 10mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)\n | item code45 | 33 | Sqm |
46 | 46 | Providing and Laying of PVC rigid water pipe 150mm dia laid over 1:5:10 ( 1 cement :5 Coarse Sand : 10 Stone aggregate 40mm nominal size) confirming to IS 13592 of 4.50 minimun pressure including necessay fixing with hardening solution and fittings if any. It wil also include encasing of pipe with cement concrete 1:3:6 (1 cement :3 Coarse Sand : 6 Stone aggregate 20mm nominal size) Size 40cm x30cm cross section | item code46 | 100 | Mtr. |
47 | 47 | Supplying and fixing C.I. cover without frame for manholes: 500 mm diameter C.I. cover (medium duty) the weight of the\ncover to be not less than 58 kg. | item code47 | 2 | Each |
48 | 48 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All\nworks upto plinth level\n1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) | item code48 | 33 | Cum |
49 | 49 | Centering and shuttering including strutting, propping etc. and removal of form work for:\nFoundations, footings, bases for columns | item code49 | 136 | Sqm |
50 | 50 | Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by\nEngineer-in-Charge: | item code50 | 188 | Sqm |
51 | 51 | Providing and laying in position cement concrete of specified grade including curing but\nexcluding the cost of centring and shuttering. All work upto plinth level with:\n1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | item code51 | 4 | Cum |
52 | 52 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in\nfoundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) | item code52 | 6 | Cum |
53 | 53 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete | item code53 | 3 | Sqm |
54 | 54 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved\nsteel primer. Using M.S. angles 40x40x6mm for diagonal braces | item code54 | 2 | Sqm |
55 | 55 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate | item code55 | 4 | Sqm |
56 | 56 | Supplying, fixing & Installation of Geyser Nozzles of.\nBrass (Chrome polish) Heavy Duty\n | item code56 | 6 | Nos. |
57 | 57 | Supplying, fixing & Installation of Verticle jet Nozzles of.\nBrass (Chrome polish): Heavy Duty\n | item code57 | 1 | Nos. |
58 | 58 | Supplying, fixing & Installation of 15ft of G.I Pipe 2” Dia Ring with 90 nos Crown jet Nozzles.\n Jindal B Class Heavy Duty\n | item code58 | 1 | Nos. |
59 | 59 | Supplying, fixing & Installation of 6ft G.I Pipe 2” Dia Ring with 36 nos Crown jet Nozzels.\nJindal B Class Heavy Duty\n | item code59 | 1 | Nos. |
60 | 60 | Supplying, fixing & Installation of 5Hp pump.\nMake-(Kirlosker/CG) Submersible valves (4” x3” Suction)\n | item code60 | 1 | Nos. |
61 | 61 | Supplying, fixing & Installation of 2Hp pump.\nMake-(Kirlosker/CG) Submersible valves (2” x 2” Suction)\n | item code61 | 2 | Nos. |
62 | 62 | Supplying, fixing & Installation of SS RGB LED light 27 watt 12 volt multi color Make –Fountain Engineering. | item code62 | 40 | Nos. |
63 | 63 | Supplying, fixing & Installation RGB Controller.\nMake-Fountain Engineering.\n | item code63 | 1 | Nos. |
64 | 64 | Supplying, fixing & Installation of starter Panel,volt meter Amper meter for pump.\nMake-Fountain Engineering.\n | item code64 | 1 | Nos. |
65 | 65 | Supplying, fixing & Installation of BFD | item code65 | 4 | Nos. |
66 | 66 | Supplying, fixing & Installation of Programming box. | item code66 | 1 | Nos. |
67 | 67 | Supplying, fixing & Installation of Solenoid valve | item code67 | 9 | Nos. |
68 | 68 | Supplying, fixing & Installation of Musical set (nos2 Dj, nos1, Amplifier). | item code68 | 1 | Nos. |
69 | 69 | Necessary plumbing work such as PVC pipes (Supreme) and all fittings coupling, tee, bends, reducers, bushes, male & female threads adopters, screwed adopter etc. jointing with solvent chemicals etc for pumping fitting | item code69 | 1 | Nos. |
70 | 70 | Necessary Electrical fitting/fixture such as submersible cables, conducting, wring of underwater or any other items required for fountain\nMake-(Havells, Kalinga, Finolex)\n\n | item code70 | 1 | Nos. |
71 | 71 | Installation and testing commissioning of Fountain all (Complete Jobs) | item code71 | 1 | Nos. |
72 | 72 | Supplying, fixing & Installation of Flower jet nozzles.\nMake-Brass + SS(Chrome polish) Heavy Duty\n | item code72 | 2 | Nos. |
73 | 73 | Supplying, fixing & Installation of Revolving jet with peacock tail \nMake-Brass (Chrome polish) Heavy Duty\n | item code73 | 1 | Nos. |
74 | 74 | Supplying, fixing & Installation of vertical jet Nozzles.\nMake-Brass (Chrome polish) Heavy Duty\n | item code74 | 5 | Nos. |
75 | 75 | Supplying, fixing & Installation of Crown jet Nozzles.\nMake-Brass(Chrome polish) Heavy Duty\n | item code75 | 280 | Nos. |
76 | 76 | Supplying, fixing & Installation of 20Ft” Dia Ring of G.I Pipe 1” Dia\n (Jindal B class)\n | item code76 | 1 | Nos. |
77 | 77 | Supplying, fixing & Installation of 10Ft Dia Ring of G.I Pipe 2” Dia\n (Jindal B class)\n | item code77 | 1 | Nos. |
78 | 78 | Supplying, fixing & Installation of 15ft Dia Ring of G.I Pipe 1.5” Dia\n (Jindal B class)\n \n | item code78 | 1 | Nos. |
79 | 79 | Supplying, fixing & Installation of 8ft Running Header of G.I Pipe 1.5” Dia\n (Jindal B class)\n | item code79 | 4 | Nos. |
80 | 80 | Supplying, fixing & Installation of crown jet nozzles for 8Ft Header of\nBrass (Chrome polish) Heavy Duty\n | item code80 | 192 | Nos. |
81 | 81 | Supplying, fixing & Installation of 2ft Dia Swims Header of G.I Pipe 1.5” Dia\n ( B class)\n | item code81 | 3 | Nos. |
82 | 82 | Supplying, fixing & Installation of 0.5” sting jet nozzles for 2Ft Header of\nBrass (Chrome polish) Heavy Duty\n | item code82 | 36 | Nos. |
83 | 83 | Supplying, fixing & Installation of 10 Hp\nMake-(Kirlosk/CG). Submersible valves (4” x4” suction) \n | item code83 | 2 | Nos. |
84 | 84 | Supplying, fixing & Installation of 5Hp Pump.\nMake-(Kirlosker/CG).Submersible valves (3” x3” Suction)\n | item code84 | 2 | Nos. |
85 | 85 | Supplying, fixing & Installation of 3Hp Pump.\nMake-(Kirloskar/CG). Submersible valves ( 3” x 1.5” suction)\n\n | item code85 | 1 | Nos. |
86 | 86 | Supplying, fixing & Installation of 2Hp Pump.\nMake-(Kirloskar/CG).Submersible valves (2” x 2” suction)\n | item code86 | 1 | Nos. |
87 | 87 | Supplying, fixing & Installation of SS RGB LED lights 27 watt 12 volt multi color. | item code87 | 128 | Nos. |
88 | 88 | Supplying, fixing & Installation of RGB Controller | item code88 | 1 | Nos. |
89 | 89 | Supplying, fixing & Installation of Starter Panel volt mtr, Ampere mtr for pump Controller | item code89 | 1 | Nos. |
90 | 90 | Supplying, fixing & Installation of BFD | item code90 | 10 | Nos. |
91 | 91 | Supplying, fixing & Installation of Programming Panel | item code91 | 1 | Nos. |
92 | 92 | Supplying, fixing & Installation of Solenoid Valve | item code92 | 20 | Nos. |
93 | 93 | Supplying, fixing & Installation of Musical set (nos 4Dj ,Nos 1Amplipher | item code93 | 1 | Nos. |
94 | 94 | Necessary plumbing work such as pipes (Supreme) and all fittings coupling, tee, bends, reducers, bushes, male & female threads adopters, screwed adopter etc. jointing with solvent chemicals etc for pumping fitting | item code94 | 1 | Nos. |
95 | 95 | Necessary Electrical Water such as submersible cables, conducting, wring of underwater.\nMake-(Havells, Kalinga, Finolex)\n | item code95 | 1 | Nos. |
96 | 96 | Installation and testing Fountain all Complete jobs | item code96 | 1 | Nos. |
97 | 97 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required\n | item code97 | 60 | Points |
98 | 98 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required | item code98 | 48 | Mtr |
99 | 99 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required | item code99 | ||
100 | 99.01 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire\n \n | item code100 | 144 | Mtr |
101 | 99.02 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | item code101 | 48 | Mtr |
102 | 99.03 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire\n | item code102 | 144 | Mtr |
103 | 100 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 1 x 1.5 sq. Mm | item code103 | 96 | Mtr |
104 | 101 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25MM | item code104 | 84 | Mtr |
105 | 102 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | item code105 | 12 | No |
106 | 103 | Supply and fixing of fan box GI type with phenolic laminated sheet/PVC Sheet as required completed Job | item code106 | 12 | No |
107 | 104 | Supply and fixing of Insdustrial type socket 40 Amp MCB with powder coated box for AC | item code107 | 12 | No |
108 | 105 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. | item code108 | ||
109 | 105.01 | 5/6 amps switch\n\n | item code109 | 36 | No |
110 | 105.02 | 3 pin 5/6 amp socket outlet | item code110 | 36 | No |
111 | 105.03 | 15/16 amp switch | item code111 | 12 | No |
112 | 105.04 | 6 pin 15/16 amp socket outlet | item code112 | 12 | No |
113 | 105.05 | T.V socket | item code113 | 12 | No |
114 | 106 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. \n | item code114 | ||
115 | 106.01 | 3 Module (100mm X 75mm) | item code115 | 12 | No |
116 | 106.02 | 6 Module (200mm X 75mm) | item code116 | 12 | No |
117 | 107 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2 + 6 way/ 8 way , Double door\n | item code117 | 12 | Ecah |
118 | 108 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole MCB\n | item code118 | 36 | No |
119 | 109 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. | item code119 | 108 | Mtr |
120 | 110 | Supplying and fixing of following items \n | item code120 | ||
121 | 110.01 | LED 4' tube light complete set of 20 watt | item code121 | 12 | No |
122 | 110.02 | LED 12 watt bulb with PVC modular type holder | item code122 | 36 | No |
123 | 110.03 | SPN 40 AMPs (16K) | item code123 | 12 | No |
124 | 110.04 | Ceiling fan 1200mm sweep | item code124 | 12 | No |
125 | 111 | Providing and laying testing and commsioing mainteance free chemical earthing inluding excavation and back feeling of good earth for installing 3 mtr long 14.2 MM dia stainless steel copper coated electrodes filled with chemical compiound complete with connecting with earthing strip testing etc. | item code125 | 2 | No |
126 | 112 | Providing and fixing of G.I strip ( 25MM x 3MM ) including welding as required complete job. | item code126 | 60 | Mtr |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail