Military Engineer Services-MES has published Gek-55/2020-21 Repairs To Wooden And Steel Furniture For Subathu Under Ge Kasauli. Submission Date for this Tender is 02-02-2021. Steel Furniture Tenders in SUBATHU Himachal Pradesh. Bidders can get complete Tender details and download the document.
Name of Work: REPAIRS TO WOODEN & STEEL FURNITURE FOR SUBATHU UNDER GE KASAULI | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 0.01 | Schedule 'A' Section - I | |||
2 | 1 | REPAIR TO CHARPOY GI PIPE 32MM AND CONVERSION/ REPLACEMENT WITH PLY TOP | |||
3 | 1.01 | Long rail;- Re-threading and fixing with elbow after removing and cutting the long rail all as shown on drg and as directed. | 28 | Each | |
4 | 1.02 | Short rail :- All as per description at ser No 1.01 above but to short rail. | 26 | Each | |
5 | 1.03 | Legs :-All as per description at ser No 1.01 above but to legs. | 26 | Each | |
6 | 1.04 | S & F long rail to charpoy GI made out of 32mm dia GI pipe medium grade conf to IS:1239 Part-I of lengh 1.9 mtr after removing the old one. | 42 | Each | |
7 | 1.05 | Cutting , threading and fixing of short rails obtained from long rails at ser No 1.04 above as per drg after removing the old one. | 38 | Each | |
8 | 1.06 | Cutting , threading and fixing of Legs obtained from short rails at ser No 1.05 above as per drawings after removing exising unservicable legs. | 32 | Each | |
9 | 1.07 | S & F of check nut 6mm thick 32mm dia GI to the long rails after removing the old UNSV chek nuts. | 40 | Each | |
10 | 1.08 | S & F 32mm GI elbow 3 way medium gde ISI marked after removing the old UNSV Elbow. | 36 | Nos | |
11 | 1.09 | S&F ply wood 12mm thick BWR type size 1980X930 after tightining of frame all as specefied with provision of flat iron of size 40X6mm,900mm long 2 Nos with 65mm long 6mm dia nuts and bolts 8 Nos with washers after drilling complete all as specified after removing the old unservicable nylon newar from charpoy. | 60 | Each | |
12 | 2 | M & L for welding to steel frames of furniture articles such as chair CB steel with arms,chair CB steel without out arms, chair verandah, table office clerk steel, form with out back, steel almirah, Table dining OR's, Locker bed side steel etc, including fixing of parts in proper position by preparing the old welded surfaces. welding shall be done through gas welding, the thickness of the metal to be welded n.exe 16 gauge. Length of welding n.exe. 25mm in each point, all as directed. | 40 | Each Point | |
13 | 3 | REPAIR TO CHAIR VERANDAH | |||
14 | 3.01 | M&L for re-canning of chair verandah with cane plastic half round 4mm wide in matt pattern superior quality as shown on drg and as directed. | 30 | Sqm | |
15 | 3.02 | M&L for preparation of old painting surfaces of any description width or girth including cleaning/scraping old painted surfaces with blow lamp etc denting & filling the depression with putty and rubbing the surface there after and painting with one coat of synthetic enamel paint by spray machine to steel items complete and colour/shade as directed by Engr-in-charge and as required. | 50 | Each | |
16 | 4 | PAINTING TO STEEL FURNITURE( INTERNALLY & EXTERNALLY):- | |||
17 | 4.01 | M&L for preparation of old painting surfaces of any description width or girth including cleaning/scraping old painted surfaces with blow lamp etc denting & filling the depression with putty and rubbing the surface there after and painting with one coat of synthetic enamel paint by spray machine to steel items complete and colour/shade as directed by Engr-in-charge and as required. | |||
18 | 4.02 | INTERNALLY & EXTERNALLY | |||
19 | 4.03 | Almirah Large steel with shelves | 60 | Each | |
20 | 4.04 | Almirah medium steel with shelves | 70 | Each | |
21 | 4.05 | Locker bed side steel | 64 | Each | |
22 | 4.06 | Table office clk steel | 20 | Each | |
23 | 4.07 | EXTERNALLY | |||
24 | 4.08 | Chair CB steel with arms | 55 | Each | |
25 | 4.09 | Chair verandah | 65 | Each | |
26 | 4.1 | Teapoy verandah | 35 | Each | |
27 | 4.11 | Book shelf open large steel | 21 | Each | |
28 | 5 | REPLACEMENT OF CUSHION FOR SOFA SET 4/5 SEATER | |||
29 | 5.01 | M&L in replacement of foam cushion size 560x530x100mm, 40 density. Duly covered all over with tapestry cloth superior quality not less than Rs 350/- per R/M as approved. A suitable chain with hook and runner of approved quality one side of the cushion will be provided of the required length as directed by Engineer-in charge. | 80 | Each | |
30 | 6 | REPAIR TO CHAIR EASY : S & F of following components of chair easy made out of well seasoned sheesham wood all as per drg after removing the old one. | |||
31 | 6.01 | Front leg | 30 | Each | |
32 | 6.02 | Rear leg | 30 | Each | |
33 | 6.03 | Side rail duly holed (Distance of 12.5 mm from one hole to another) | 28 | Each | |
34 | 6.04 | Front rail duly holed (Distance of 12.5 mm from one hole to another) | 28 | Each | |
35 | 6.05 | Back rail duly holed (Distance of 12.5 mm from one hole to another) | 32 | Each | |
36 | 6.06 | Front support rail | 26 | Each | |
37 | 6.07 | Back support rail | 28 | Each | |
38 | 6.08 | Arms | 32 | Each | |
39 | 6.09 | Preparation of surface by removing of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge. | 28 | Each | |
40 | 7 | REPAIR TO CHAIR WRITING : S&F of following components of chair Writing made out of well seasoned sheesham wood all as per drg after removing the old one. | |||
41 | 7.01 | Front leg | 40 | Each | |
42 | 7.02 | Rear leg | 48 | Each | |
43 | 7.03 | Side rail duly holed (Distance of 12.5 mm from one hole to another) | 32 | Each | |
44 | 7.04 | Front rail duly holed (Distance of 12.5 mm from one hole to another) | 34 | Each | |
45 | 7.05 | Back rail duly holed (Distance of 12.5 mm from one hole to another) | 38 | Each | |
46 | 7.06 | Long Stiffner | 34 | Each | |
47 | 7.07 | Back support rail | 40 | Each | |
48 | 7.08 | Arms | 42 | Each | |
49 | 7.09 | Preparation of surface by removing of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge. | 56 | Each | |
50 | 8 | REPAIR TO CHAIR DINING : S&F of following components of chair Dining made out of well seasoned sheesham wood all as per drg after removing the old one. | |||
51 | 8.01 | Front leg | 68 | Each | |
52 | 8.02 | Rear leg | 68 | Each | |
53 | 8.03 | Side rail duly holed (Distance of 12.5 mm from one hole to another) | 66 | Each | |
54 | 8.04 | Front rail duly holed (Distance of 12.5 mm from one hole to another) | 64 | Each | |
55 | 8.05 | Back rail duly holed (Distance of 12.5 mm from one hole to another) | 58 | Each | |
56 | 8.06 | Long Stiffner | 48 | Each | |
57 | 8.07 | Back support rail | 48 | Each | |
58 | 8.08 | Preparation of surface by removing of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge. | 80 | Each | |
59 | 9 | M&L for re-canning to all types of chairs, chair dinning, writing, easy, CBA, CBB, easy NF, stool dressing and bin soiled etc with cane plastic 2mm wide half round with border of 3mm wide in white colour as approved in true godrej pattern as shown in drg after removing the old one. | 30 | Sqm | |
60 | 10 | Repair to Peg Table | |||
61 | 10.01 | Removing the unserviceable leg and providng the new leg made out of 1st class sheesham wood seasoned of size 30x50x362mm high and fixing the same in its original position as per drg. | 42 | Each | |
62 | 10.02 | Removing the old broken top rail and providing the new top rail made out of 1st class hardwood sheesham of size 20x40x380mm and fixing the same in its original position as per drg. | 40 | Each | |
63 | 10.03 | S&F in replacement of table top for Peg table after removing the old unserviceable top made out of 19mm thick pre-laminated particle board one side sheesham faced and other side white balancing confirming to IS-3097 including sheesham wood beeding 6mm thick fitted all around duly french polished as shown in Drg and as directed by Engineer -in-charge. | 40 | Each | |
64 | 10.04 | Preparation of surface by Removing of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge. | 38 | Each | |
65 | 11 | Repair to Table Centre | |||
66 | 11.01 | Removing unseviceable leg and providing new leg made out of 1st class hardwood sheesham of size 60x30x356 mm and fixing the same in its original position as per drg. | 48 | Each | |
67 | 11.02 | Removing old broken top rail and providing the new top rail made out of 1st class hardwood sheesham of size20x50x900mm and fixing the same in its original position as per drg. | 50 | Each | |
68 | 11.03 | S&F in replacement of table top for table centre after removing the old unserviceable top made out of 19mm thick pre-laminated particle board one side sheesham faced and other side white balancing confirming to IS-3097 including sheesham wood beeding 6mm thick fitted all around duly french polished as shown in Drg and as directed by Engineer -in-charge. | 58 | Each | |
69 | 11.04 | Preparation of surface by Removing of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge. | 30 | Each | |
70 | 12 | Repair to Table Dining 6 person | |||
71 | 12.01 | Removing unserviceable leg and providing new leg of size 75x40x722mm high and shape made out of 1st class well seasoned hardwood sheesham and fixing the same in its original position as per drg. | 40 | Each | |
72 | 12.02 | Removing the unserviceable top rail long and providing the new top rail of size 25x100x1500mm and shape made out of 1st class hardwood well seasoned sheesham and fixing the same in its original position as per drg. | 42 | Each | |
73 | 12.03 | Removing old broken top rail short and providing the new top rail made out of 1st class hardwood sheesham and fixing the same in its original position as per drg. | 38 | Each | |
74 | 12.04 | S&F in replacement of table top for table dining six person after removing the old unsv top made out of 19mm thick pre-laminated particle board one side sheesham faced and other side white balancing confirming to IS-3097 including sheesham wood beeding 6mm thick fitted all around duly french polished as shown in Drg and as directed by Engineer -in-charge . | 36 | Each | |
75 | 12.05 | Preparation of surface by remove of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge. | 24 | Each | |
76 | 13 | Repair to Table Dining 8 person | |||
77 | 13.01 | Removing unserviceable leg and providing new leg of size 75x40x722mm high and shape made out of 1st class well seasoned hardwood sheesham and fixing the same in its original position as per drg. | 16 | Each | |
78 | 13.02 | Removing the unserviceable top rail long and providing the new top rail of size 25x100x1500mm and shape made out of 1st class hardwood well seasoned sheesham and fixing the same in its original position as per drg. | 14 | Each | |
79 | 13.03 | Removing old broken top rail and providing the new top rail made out of 1st class hardwood sheesham of size 1500x900mm and fixing the same in its original position as per drg. | 16 | Each | |
80 | 13.04 | S&F in replacement of table top for table dining eight person after removing the old unsv top made out of 19mm thick pre-laminated particle board one side sheesham faced and other side white balancing confirming to IS-3097 including sheesham wood beeding 6mm thick fitted all around duly french polished as shown in Drg and as directed by Engineer -in-charge. | 18 | Each | |
81 | 13.05 | Preparation of surface by remove of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge. | 12 | Each | |
82 | 14 | Repair to Table 3x2 with drawer | |||
83 | 14.01 | Removing unserviceable leg and providing new leg made out of 1st class well seasoned hardwood sheesham and fixing the same in its original position as per drg. | 18 | Each | |
84 | 14.02 | Removing the unserviceable top rail long and providing the new top rail made out of 1st class hardwood well seasoned sheesham and fixing the same in its original position as per drg. | 16 | Each | |
85 | 14.03 | Removing old broken top rail short and providing the new top rail made out of 1st class hardwood sheesham and fixing the same in its original position as per drg. | 18 | Each | |
86 | 14.04 | S&F in replacement of table top forTable 3 x 2 with drawer after removing the old unsv top made out of 19mm thick pre-laminated particle board one side sheesham faced and other side white balancing confirming to IS-3097 including sheesham wood beeding 6mm thick fitted all around duly french polished as shown in Drg and as directed by Engineer -in-charge. | 14 | Each | |
87 | 14.05 | Preparation of surface by remove of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge. | 22 | Each | |
88 | 15 | Repair to Bed Hard with Ply Top : Dismantling of old unserviceable components and S & F of new components made out of well seasoned sheesham wood properly planed all as shown in drg :- | |||
89 | 15.01 | S & F Long rail size 1980x100x40mm | 24 | Each | |
90 | 15.02 | S & F Short rail size 840x100x40mm | 30 | Each | |
91 | 15.03 | S & F Stiffner to support ply top of size 835x50x40mm | 28 | Each | |
92 | 15.04 | S&F of head side board of bed newar/bed ply top duly fixed with legs of shisham wood including dismantling of UNSV Compoment all as specified and shown on drg. FD-245/246 | 26 | Each | |
93 | 15.05 | S&F of foot side board of bed newar/bed ply top duly fixed with legs of shisham wood including dismantling of UNSV Compoment all as specified and shown on drg. FD-245/247 | 30 | Each | |
94 | 15.06 | S&F of 3mm thick sheesham face ply wood BWR gde with head less nails to both sides to the following including sheesham wood beading 6mm thick all around after taking out old one. | |||
95 | 15.07 | (i) Head board size 900x442mm | 32 | Each | |
96 | 15.08 | (ii) Foot board size 900x230mm | 30 | Each | |
97 | 15.09 | S&F ply wood of size 1830x865x12mm in one piece BWP ISI marked to bed hard fixing with 30mm screw wood steel as shown on drg. | 24 | Each | |
98 | 15.1 | S&F MS flat iron clamp size 200x35x6mm to be fixed with six Nos of screw wood steel as shown on drg duly painted with paint enamelled black. | 26 | Each | |
99 | 16 | POLISHING TO WOODEN FURNITURE : M&L for preparation of old polished surfaces of any descreption width or girth including cleaning , removing oily spots, ink dots etc and polishing with french polish for glossy finish to the entire satisfaction of Engr -in- charge the tint of polish shall be exactly same as of existing polish colour of furniture or as approved by Engr-in-charge. | |||
100 | 16.01 | Almirah large with shelf | 28 | Each | |
101 | 16.02 | Almirah Medium with shelf | 30 | Each | |
102 | 16.03 | Bed hard with ply top | 34 | Each | |
103 | 16.04 | Book case small | 32 | Each | |
104 | 16.05 | Bin soiled linen | 10 | Each | |
105 | 16.06 | Chair dining | 70 | Each | |
106 | 16.07 | Chair writing | 40 | Each | |
107 | 16.08 | Chair easy | 42 | Each | |
108 | 16.09 | Chair CBA | 8 | Each | |
109 | 16.1 | Chair wooden bottom | 14 | Each | |
110 | 16.11 | Sofa set 5 seater | 22 | Set | |
111 | 16.12 | Locker bed side(Internal & External) | 14 | Each | |
112 | 16.13 | Table peg | 24 | Each | |
113 | 16.14 | Teapoy | 30 | Each | |
114 | 16.15 | Table bed side | 58 | Each | |
115 | 16.16 | Table office officer wooden | 20 | Each | |
116 | 16.17 | Table office clk wooden | 30 | Each | |
117 | 16.18 | Table writing | 34 | Each | |
118 | 16.19 | Table centre | 74 | Each | |
119 | 16.2 | Table dining 8 pers | 14 | Each | |
120 | 16.21 | Table 3'x2' with drawer | 22 | Each | |
121 | 16.22 | Table 3'x2' without drawer | 24 | Each | |
122 | 16.23 | Side board | 14 | Each | |
123 | 17 | Amount of credit of Rs.6,604.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail