}

Construction Of Shed For Installation Of 60 Kva Ups Along With Accessories For Nicu At Smgs Hospital Jammu, SMGS Hpspital-Jammu And Kashmir

Public Works Department-PWD has published Construction Of Shed For Installation Of 60 Kva Ups Along With Accessories For Nicu At Smgs Hospital Jammu. Submission Date for this Tender is 22-01-2021. Civil Work Tenders in SMGS Hpspital Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

26617501
Construction Of Shed For Installation Of 60 Kva Ups Along With Accessories For Nicu At Smgs Hospital Jammu
Open Tender
Indian
Jammu And Kashmir
SMGS Hpspital
22-01-2021

Tender Details

Construction Of Shed For Installation Of 60 Kva Ups Along With Accessories For Nicu At Smgs Hospital Jammu

Key Value

Document Fees
INR 600 /-
EMD
INR 7020.0 /-
Tender Value
Refer document

BOQ Items

Name of Work Construction of shed for installation of 60 KVA UPS along with accessories for NICU at SMGS Hospital, Jammu
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) 11.97 Cum
2 2 CAST-IN-SITU\nProviding and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 3.28 Cum
3 3 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars 410 Kg
4 4 FORM WORK\nCentering and shuttering including strutting, propping etc. and removal of form for:
5 4.01 Suspended floors, roofs, landings, balconies and access platforms 11.22 Sqm
6 4.02 Weather shades, chajjas, corbels etc. including edges 0.98 Sqm
7 4.03 Lintel, beams, plinth beams, girders, bressumers and cantilevers. 9.21 Sqm
8 5 Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. 11.22 Sqm
9 6 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) 104.83 Sqm
10 7 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
11 7.01 1 mm thick 11.22 Sqm
12 7.02 2 mm thick 104.783 Sqm
13 8 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. 116.05 Sqm
14 9 Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work 60.29 Sqm
15 10 Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) 55.76 Sqm
16 11 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm 11.22 Sqm
17 12 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm 16.35 Sqm
18 13 Frames and trusses\nProviding wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood 0.05 Cum
19 14 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 6 No
20 15 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second class deodar wood 0.64 Sqm
21 16 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.12 mm thick Marine plywood conforming to IS: 710 1.51 Sqm
22 17 Applying priming coat:\nWith ready mixed pink or grey primer of approved brand\nand manufacture on wood work (hard and soft wood) 6.41 Sqm
23 18 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work 6.41 Sqm
24 19 Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete 250x16 mm 2 No
25 20 Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.150x10 mm 2 No
26 21 Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete : 125 mm 2 No
27 22 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including\nnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)Powder coated aluminum (minimum thickness of powder coated 50 microns) 32.5 Kg
28 23 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns) 69.01 Kg
29 24 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) 1.89 Sqm
30 25 Providing and fixing Anodized aluminum grill (Anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved Anodized aluminum standard section around the opening, all complete as epr requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment) 10.2 Kg
31 26 Providing andf fixing eye hooks 150 mm long with necessary screws etc. complete 8 No
32 27 Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 16 No
33 28 Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. omplete. 125 mm 8 No
34 29 Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With 12 mm mild steel U beading 1.89 Sqm
35 30 Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 15.3 Rmt
36 31 Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring\nconforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm bend 6 No
37 32 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams. 3 No
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail