}

Repair/Maint Of Lt Ug Cabl/ Lt Oh Lines And Allied Works At Varanasi Cantt ., Allahabad-Uttar Pradesh

Military Engineer Services-MES has published Repair/Maint Of Lt Ug Cabl/ Lt Oh Lines And Allied Works At Varanasi Cantt .. Submission Date for this Tender is 05-02-2021. Overhead Line Tenders in Allahabad Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

26617442
Repair/Maint Of Lt Ug Cabl/ Lt Oh Lines And Allied Works At Varanasi Cantt .
Open Tender
Indian
Uttar Pradesh
Allahabad
05-02-2021

Tender Details

Repair/Maint Of Lt Ug Cabl/ Lt Oh Lines And Allied Works At Varanasi Cantt .

Key Value

Document Fees
INR 500 /-
EMD
INR 48000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: REPAIR/MAINT OF LT UG CABLE/ LT OH LINES & ALLIED WORKS AT VARANASI CANTT
Ser. No. Item Description Item Code / Make Quantity Units
1 1 Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft / loose soil including bottom surface to required level or slope for laying of cable complete all as specified & directed. 200 Cum
2 2 Returning filling in excavated soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm depth in soft / loose soil complete all as specified & directed. 60 Cum
3 3 Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed. 140 Cum
4 4 Material & Labour for sand cushioning with clean dry local sand [unwashed] for protection of under ground cable (8 cm before laying and 15 cm after laying of the cable) in trenches and consolidated complete all as specified & directed.\nNote : Punned thickness 18 cm only shall be considered for payment. 130 Cum
5 5 Material & Labour for sub class ‘B’ common burnt bricks old size, laid dry, flat with width equal to length of bricks as cover / laid over the cable to protection of under ground cable complete all as specified & directed. 14000 Each
6 6 Supply & Fixing 80 mm bore galvanised iron water tubing "light grade" ISI marked including fittings such as bends, tees, sockets etc fixed on walls / pole or laid in trenches under road crossing including taking down old existing pipe complete all as specified & directed.\nNote : Excavation, earth work, sand cushioning & protection work shall be measured & paid separately. 50 RM
7 7 Supply & Fixing 50 mm bore galvanised iron water tubing "light grade" ISI marked including fittings such as bends, tees, sockets etc fixed on walls / pole or laid in trenches under road crossing including taking down old existing pipe complete all as specified & directed.\n 50 RM
8 8 Supplying, laying, jointing, commissioning & testing of XLPE cable Insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down old existing damaged burnt cable and removed from site complete all as specified & directed of following sizes : ----\nMake : Havells / Plaza / KEI / Gloster / Finolex / Grandlay Cables
9 9 [a] 25 Sqmm 3 ½ core XLPE cable 150 RM
10 10 [b] 35 Sqmm 3 ½ core XLPE cable 150 RM
11 11 [c] 50 Sqmm 3 ½ core XLPE cable 150 RM
12 12 [d] 70 Sqmm 3 ½ core XLPE cable 150 RM
13 13 [e] 95 Sqmm 3 ½ core XLPE cable 150 RM
14 14 [f] 120 Sqmm 3 ½ core XLPE cable 150 RM
15 15 [g] 240 Sqmm 3 ½ core XLPE cable 130 RM
16 16 Material & Labour for drilling holes under road [suitable up to 80 mm bore pipe] with trenchless technology with-out damaging existing road / path / hard standing to cross / pass the UG cable incluidng necessary T&P required complete all as specified & directed. 60 RM
17 17 Material & Labour earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI strip 32 x 6mm as earthing lead by means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including necessary excavation, earth work, 40mm bore GI pipe light grade ISI marked for protection of GI strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1 using 20 mm stone aggregate chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover slab in 1:2:4 type B-1 using 20 mm crushed stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade ISI marked for watering complete all as specified & shown in electrical plate No. 3 of SSR Part-I and connected to earth test point including testing including dismantling of old ineffective earthing complete all as specified & directed. \nNote :- The rates quoted shall also deemed to include the cost of Earth test point and earth strip / wire and protection pipe upto 7.5 meter beyond the earth plates electrode. 10 Each
18 18 Supply & Fixing in repair steel tubular pole swaged pole type 410-SP-31 (9.0m long pole) complete with cast iron base plate, pole cap, mild steel bolt, nuts and screws complete as specified including consisting of following works:- \n(a) Excavation in trenches not exceeding 1.5 mtr wide & 1.58 mtr deep for pole foundation & getting out in soft / loose soil, returning filling in the excavated soil after fixing the pole in foundation well ramming of earth around the pole in layer not exceeding 25 cm thick and disposal of surplus soil to a distance not exceeding 50 mtrs complete as directed.\n(b) Material & Labour for PCC 1:4:8 type D-2 using 40mm crushed stone aggregate as in foundation of pole 900 mm x 600 mm cross section and upto planting depth 1.5 mtr for concrete encasing the pole upto GL complete as specified & directed.\n(c) Material & Labour for providing PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate for plinth block / collar above GL 500mm high and 450mm dia complete all as specified & directed.\n 5 Each Job
19 18.1 Item contd . /. \n(c) Material & Labour for providing PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate for plinth block / collar above GL 500mm high and 450mm dia complete all as specified & directed.\n(d) Material & Labour for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coat of aluminium paint over one coat of red oxide primer including preparation of steel surface including painting of 30 cm wide bands 3 Nos with synthetic enamel paint of appropriate colour in alternate layer upto the height of 1.5mm above plinth block.\n(e) M&L for writing letter or figures (Block Roman, Italic as Indian) with thick synthetic enamel paint of apprised shade not exceeding 5 cm height including numbering of pole as XXXX complete all as specified & directed.\nNote : Manufacture's test certificate of the pole will be produced to Engineer-in-charge before erection of pole work.
20 19 Supply & Fixing in repair earth continuity conductor or main earthing lead GI Strip 32mm x 6mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required complete all as specified & directed. 50 RM
21 20 Material & Labour painting of indoor / outdoor panel any capacity & any size, with one coat of synthetic enamel paint after removing dust, dirt & preparation of steel surface, welding / fixing and providing fresh hinges / screw / nut bolts as required and fixing the panel door for painting including marking and writing letter such as SM No. XXXX, capacity etc with safety and precaution complete all as specified & directed. 15 Each Job
22 21 Supply & Fixing in repair rubber Insulating matting as per ISI mark of size 1000 mm x 2000 mm x 19 mm thick as per existing complete as directed by Engineer-in-Charge. 5 Each
23 22 Supply & Fixing in repair MCCB 3 pole 415 volts 63 Amp breaking capacity 25 KA with thermal magnetic release adjustable type in sheet metal enclosure including connecting to existing cable complete as directed by Engineer-in-Charge.\nMake : Havells / Legrand / L&T / ABB / Inso-Asian / Schineder 4 Each
24 23 Supply & Fixing in repair MCCB 3 pole 415 volts 100 Amp breaking capacity 36 KA with thermal magnetic release adjustable type in sheet metal enclosure including connecting to existing cable complete as directed by Engineer-in-Charge.\nMake : Havells / Legrand / L&T / ABB / Inso-Asian / Schineder 5 Each
25 24 Supply & Fixing in repair MCCB 4 pole 415 volts 160 Amp breaking capacity 36 KA with thermal magnetic release adjustable type in sheet metal enclosure including connecting to existing cable complete as directed by Engineer-in-Charge.\nMake : Havells / Legrand / L&T / ABB / Inso-Asian / Schineder 4 Each
26 25 Supply & Fixing in repair MCCB 4 pole 415 volts 200 Amp breaking capacity 36 KA with thermal magnetic release adjustable type in sheet metal enclosure including connecting to existing cable complete as directed by Engineer-in-Charge.\nMake : Havells / Legrand / L&T / ABB / Inso-Asian / Schineder 4 Each
27 26 Supply & Fixing in repair MCCB 4 pole 415 volts 250 Amp breaking capacity 36 KA with thermal magnetic release adjustable type in sheet metal enclosure including connecting to existing cable complete as directed by Engineer-in-Charge.\nMake : Havells / Legrand / L&T / ABB / Inso-Asian / Schineder 4 Each
28 27 Supply & Fixing in repair MCCB 4 pole 415 volts 400 Amp breaking capacity 50 KA with thermal magnetic release adjustable type in sheet metal enclosure including connecting to existing cable complete as directed by Engineer-in-Charge.\nMake : Havells / Legrand / L&T / ABB / Inso-Asian / Schineder 3 Each
29 28 Supply & Fixing in repair MCCB 4 pole 415 volts 630 Amp breaking capacity 50 KA with thermal magnetic release adjustable type in sheet metal enclosure including connecting to existing cable complete as directed by Engineer-in-Charge.\nMake : Havells / Legrand / L&T / ABB / Inso-Asian / Schineder 1 Each
30 29 Supply & Fixing in repair MCB TPN 4 pole 415 volts 63 Amp breaking capacity 25 KA with thermal magnetic release adjustable type in sheet metal enclosure including connecting to existing cable complete as directed by Engineer-in-Charge.\nMake : Havells / Legrand / L&T / ABB / Inso-Asian / Schineder 15 Each
31 30 Dismentaling or taking out old damaged disconnecting existing unserviceable ACSR conductor on over head lines conductor on LT poles of any size & shape complete & removing from site complete all as specified & directed. 2 Qtl
32 31 M&L for stringing, galvanised steel wire 3.15mm dia for earth coductor, on HT/LT poles including binding wire etc. complet including dismantling existing GI wire complete all as specified and directed. 2 Qtl
33 32 Material & Labour for bus bar box of sheet metal 2mm thick, having 4 numbers aluminium bus bar of rating 200 Amp mounted on insulator including 01 No. of MCCB 4 pole 100 Amp 415 volts with thermal magnetic release of breaking capacity 25KA inside the box and suitable fixing arrengement like flat iron clamp of size 25 x 3mm with hinged cover & locking arrangement duly painted with two coat of synthetic enamel paint over one coat of red oxide primer fixed in repair on pole or wall complete as specified & directed.\nMake : Havells / C&S / L&T / ABB / Legrand. 6 Each
34 33 Material & Labour painting of 9 m steel tubular LT pole with cross arms and clamp of any length and shape for LT overhead line / street light pole with one coat of aluminium paint including preparation of the existing steel / pole surface including marking pole number as xxxx in a 15cm dia yellow circle and marking three black & two yellow bends with 10 cm width by fluorescent paint, from coping of pole to 1.5m hight on pole including painting of coping with white wash with taking necessary safety precaution complete all as specified & directed. \nNote : Shut down of electricity shall be taken before start of painting and shall be reconnected the same after painting. 500 Each Job
35 34 Restringing of existing overhead line ACSR conductor and earth wire of any size including opening from Insulators, tightening up to permissible sag, binding properly and re-fixing of cradles with safety precaution complete all specified & directed. \nNote : Each row of ACSR conductors and earth wire to be measured approx length of each span is 30-35 RM. 150 Each Span
36 35 Material & Labour ACSR conductor including jointing with and including aluminium binding wire 14 SWG dia and stretching of ACSR conductor complete all as specified & directed.\nNote : For payment purpose, weight of conductor only shall be considered.\nMake : Indian aluminium Co. / Bharat Conductor / Aluminium IND. 2 Qtl
37 36 Material & Labour in replacement cross arms bracing, supports, clamp and back plates fabricated from mild steel different sections including nuts, bolts & washers including welding / bending cold or hot, drilling hole for bolts, in any shape or size as indicated or directed or required at site inclusive two coats of aliminium paint over one coat of red oxide primer including taking down of old exsiting damaged rusted cross armss in diferent sections complete all as specified & directed. 1 Qtl
38 37 Material & Labour in repair galvanized steel earth wire 4mm dia for continous earth wire conductor on LT pole including binding wire of GI wire 14 SWG dia complete as specified & directed. 2 Qtl
39 38 Supply & Fixing in repair stay assembly consisting of galvanised stay strand 7/2.24mm stay bow of 14 mm dia, stay rod 16 mm dia 1800 mm long with loop insulators stay plate 230 mm x 230 mm x 6 mm with plain cement concrete foundation 1:3:6 type C-2 using 40 mm crushed stone aggregate complete with stay clamps, bolts and nuts complete as specified & directed by Engineer-in-Charge including comprising of the following :-\n(a) Excavation and earth work for stay foundation in soft / loose soil, disposal of surplus earth / soil to a distance not exceeding 50 metres & depositing where directed at a level not exceeding 1.5 mtr from the starting point as directed.\n(b) PCC 1:3:6 type C-2 using 40 mm crushed stone aggregate as in embedding blocks complete. 6 Each Set
40 39 Material & Labour in repair shackle type porcelain vitreous white brown or green Insulator inluding one galvanised strip 31 x 3mm, 12 mm dia galvanised iron nuts, bolts & washers and 75 mm height & 90 mm dia suitable for 1100 volts grade including taking down old / unserviceble damage Insulators complete all as specified & directed. \nMake : Jaipuria Brothers or equivalent BHEL or Jayshree Insulators 15 Each
41 40 Material & Labour in repair pin type insulator porcelain vitreous, white, brown or green 100 mm high and 65 mm dia, working pressure 1100 volts including one galvanized MS spindle, two GI washers and one GI nut complete all as specified and directed. 20 Each
42 41 Material & Labour for change over switches panel mounted off load type in open execution, front operated rotary handle of 63 Amp rating, 4 pole 415 Volt including taking down old unserviceable damaed change over switch complete all as specified & directed. 2 Each
43 42 Material & Labour for change over switches panel mounted off load type in open execution, front operated rotary handle of 100 Amp rating, 4 pole 415 Volt including taking down old unserviceable damaed change over switch complete all as specified & directed. 4 Each
44 43 Material & Labour for change over switches panel mounted off load type in open execution, front operated rotary handle of 200 Amp rating, 4 pole 415 Volt including taking down old unserviceable damaed change over switch complete all as specified & directed. 4 Each
45 44 Material & Labour for change over switches panel mounted off load type in open execution, front operated rotary handle of 400 Amp rating, 4 pole 415 Volt including taking down old unserviceable damaed change over switch complete all as specified & directed. 1 Each
46 45 Material & Labour PVC junction box of size 230 mm x 170 mm x 105 mm with four numbers aluminium bus bar of rating 100Amp mounted and including heavy duty insulators, shockproof, rustproof and terminite resistant cable entery form bottom and other sides 100% weatherproof with pole mounting arrangement temperproof, suitable for fire retardant class FV-0 as per IS : 11731 Part - II or V-O as per UL-94 including provision of twin core flexible copper wire PVC insulated 2.5 Sqmm from junction box to the light fittings and flat iron clamp of size 25 x 3mm with complete as specified & directed.\nMake : Sintex / Naithani Plastic works / Supreme Industries. 20 Each
47 46 Supply, Installation, testing and commissioning feeder pillar box made with out of 3.15 mm thick CRCA sheet 415 volts, 4 wire, AC 50 Hz hutted roof cubical factory made outdoor type of size 1000 mm x 750 mm x 600 mm powder coated both sides Interior & Exterior type weather and vermin proof with having degree of proctection as per IP-43 complete with factory lock two earth terminal, suitable cable gland for all incoming and outgoing and removable neutral link, connecting strip / solid conductor brought out to cable chamber brass / copper nut, bolts / washer etc including grouting of feeder pitter box 60 cm above ground level by providing 90 cm long angle iron of size 50 x 50 x 6 mm welded on all the four corner embedded in PCC 1:2:4 using 20 mm graded stone aggregate complete with comprsing of the following accesseries:- \n(a) Copper insulated busbar high conductivity 450 Amp for 3 phase 03 Nos including neutral of 200 Amp ---- 01 No\n 2 Each Job
48 46.1 Item contd . /. \nIncoming : \n(a) MCCB 4 pole, 50 KA, 315 Amp 415 Volt thermal magnetic release type on full load & over current ---- 01 No.\n(b) Voltmeter 0-500 Volt with selector switch ------ 01 No\n(c) Ampere meter 0-400 Amp with CT and selector switch ----- 01 No\n(d) Indication Lamp three phase LED type RYB ----- 01 Set\nOutgoing : \n(a) MCCB 200 Amp 3 pole 35 KA thermal magnetic release adjustable type on full load & over current ---- 01 No\n(b) MCCB 160 Amp 3 pole 25 KA thermal magnetic release adjustable type on full load & over current ----- 02 Nos\n(c) MCCB 63 Amp 3 pole 25KA thermal magnetic release adjustable type on full load & over current ----- 02 Nos\n(d) MCB SPN 40 Amps ----- 01 No.\n(e) Astronomical programmable Timer switch three phase 12 KW with 3 pole contactor complete with all accessories ---- 01 No.
49 47 Supplying, jointing & testing cable jointing kit for 1100 Volts grade cables for cable end termination heat shrink type joint complete with jointing material & accessories for 3.5 core XLPE cable of size 25 Sqmm to 50 Sqmm insulated armoured aluminium cable including taking down old / unserveciable damaged cablr joint kit complete all as specified & directed. Make : 3M Ltd / Denson / Raychem 10 Each
50 48 Supplying, jointing & testing cable jointing kit for 1100 Volts grade cables for cable end termination heat shrink type joint complete with jointing material & accessories for 3.5 core XLPE cable of size 70 Sqmm to 95 Sqmm insulated armoured aluminium cable including taking down old / unserveciable damaged cablr joint kit complete all as specified & directed. Make : 3M Ltd / Denson / Raychem 6 Each
51 49 Supplying, jointing & testing cable jointing kit for 1100 Volts grade cables for cable end termination heat shrink type joint complete with jointing material & accessories for 3.5 core XLPE cable of size 120 Sqmm Insulated armoured aluminium cable including taking down old / unserveciable damaged cablr joint kit complete all as specified & directed. Make : 3M Ltd / Denson / Raychem 4 Each
52 50 Supplying, jointing & testing cable jointing kit for 1100 Volts grade cables for cable straight through cold shrink type joint complete with jointing material & accessories for 3.5 core XLPE cable of size 185 Sqmm insulated armoured aluminium cable including taking down old / unserveciable damaged cablr joint kit complete all as specified & directed. Make : 3M Ltd / Denson / Raychem 2 Each
53 51 Supplying, jointing & testing cable jointing kit for 1100 Volts grade cables for cable straight through cold shrink type joint complete with jointing material & accessories for 3.5 core XLPE cable of size 240 Sqmm insulated armoured aluminium cable including taking down old / unserveciable damaged cablr joint kit complete all as specified & directed. Make : 3M Ltd / Denson / Raychem 2 Each
54 52 Supplying, jointing & testing cable jointing kit for 1100 Volts grade cables for cable straight through cold shrink type joint complete with jointing material & accessories for 3.5 core XLPE cable of size 300 Sqmm insulated armoured aluminium cable including taking down old / unserveciable damaged cablr joint kit complete all as specified & directed. Make : 3M Ltd / Denson / Raychem 4 Each
55 53 Supply, Installation, testing and commissioning of factory made cubical type Indoor feeder pillar box made with out of 3.15 mm thick CRCA sheet 415 volts, 4 wire, AC 50 Hz of size 900 mm x 750 mm x 600 mm powder coated both sides Interior & Exterior type weather and vermin proof with having degree of proctection as per IP-56 complete with factory lock two earth terminal, suitable cable gland for all incoming and outgoing and removable neutral link, connecting strip / solid conductor brought out to cable chamber brass / copper nut, bolts / washer etc including grouting of feeder pitter box 60 cm above ground level by providing 90 cm long angle iron of size 65 x 65 x 6 mm welded on all the four corner embedded in PCC 1:2:4 using 20 mm graded stone aggregate complete with comprsing of the following accesseries:- \n(a) Copper insulated busbar high conductivity 400 Amp for 3 phase including neutral of 400 Amp ---- 01 No \n 1 Each Job
56 53.01 Items contd . /... \nIncoming : \n(a) MCCB 4 pole, 35 KA, 250 Amp 415 Volt thermal magnetic release type ---- 01 No.\nOutgoing :\n(a) MCCB 160 Amp 4 pole 25 KA thermal magnetic release - 01 No\n(b) MCCB 125 Amp 4 pole 25 KA thermal magnetic release - 03 Nos\n(c) MCCB 63 Amp 4 pole 25 KA thermal magnetic release - 01 No\n(d) Digital voltmeter 0-500 Volt with selector switch ----- 01 No.\n(e) Digital Ammeter 0-400 Amp with CTs 400/5 with selector switch ----- 01 No.\n(f) Indicator lamp LED type with RYB -- 01 Set\n(g) Front operated rotary type on load changeover switch 200 Amp - 01 No.
57 54 Material & Labour pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in man hole or drain cover, cover slab (for manholes), chajjas, shelves and similar work including necessary form work complete all as specified & directed. 5 Cum
58 55 Material & Labour mild steel TMT bars 8-10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & directed. 100 Kg
59 56 Surface excavation not exceeding 30cm deep & averaging 15 cm deep in soft / loose soil and getting out complete all as specified & directed. 120 Sqm
60 57 Material & Labour for hard core broken stone of gauge not exceeding 63 mm, deposited spread and levelled in layers not exceeding 15 cm thick, levelling and rammed to a true surface complete all as specified & directed. 120 Cum
61 58 Material & Labour for Loop type Insulator, vitreous porcelain, white, brown or green: Large size, with overall dimensions 90mm x140mm, clearance of hole 25.5mm complete all as specified & directed. 10 Each
62 59 Material & Labour for Galvanised stay strand, 7/4mm complete all as specified and directed. 2 Qtl
63 60 Material & Labour for Anti-climbing device spikes type fabricatied out of MS bars (round, square and flat) including nuts, bolts, washers and welding in two holes made to shape to suit the cross section of the pole complete all specified & directed. 0.5 Qtl
64 61 Material & Labour for danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts and nuts of approved size for LT 200 mm x 150 mm size complete as specified & directed. 15 Each
65 62 Material & Labour for danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts and nuts of approved size for HT 250 mm x 200 mm size complete as specified & directed. 20 Each
66 63 Material & Labour cutting & triming and vending tree branches around over head lines upto 2 m nearest distance after arranging / obtaining electrical shut down including taking all necessary precautions while working on lines contractor using own T&P by the contractor complete as specified & directed by Engineer-in-Charge. [For taking shut down to excute the work minimum one skilled electrician and four mazdoor for 8 hrs / day shall be deployed on the work and removing tree branches from site. Note : Each span means distance between pole to pole. 100 Each Span
67 64 Supply & Fixing aluminium conductor multi stranded 1100 volts grade heavy duty cable PVC Insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections flat of circular cable of size 4 Sqmm 2 core complete all specified & directed.\nMake : Plaza / Finolex / Havells / Kalinga Premium / KEI / Grandlay 200 RM
68 65 Supply & Fixing aluminium conductor multi stranded 1100 volts grade heavy duty cable PVC Insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections flat of circular cable of size 6 Sqmm 2 core complete all specified & directed.\nMake : Plaza / Finolex / Havells / Kalinga Premium / KEI / Grandlay 400 RM
69 66 Supply & Fixing aluminium conductor multi stranded 1100 volts grade heavy duty cable PVC Insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections flat of circular cable of size 4 Sqmm 10 core complete all specified & directed.\nMake : Plaza / Finolex / Havells / Kalinga Premium / KEI / Grandlay 400 RM
70 67 Material & Labour for LT line spacer spiral type including fixing on existing over head lines to maintain the required distance complete as directed by Engineer-in-Charge. 200 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail