}

Welcome Maintenance Including Kitchen Wc And Internal Water Supply At Margao Under Ge Panaji Goa, GE PANAJI-Goa

Military Engineer Services-MES has published Welcome Maintenance Including Kitchen Wc And Internal Water Supply At Margao Under Ge Panaji Goa. Submission Date for this Tender is 04-02-2021. Electrical Maintenance Tenders in GE PANAJI Goa. Bidders can get complete Tender details and download the document.




Tender Notice

26617201
Welcome Maintenance Including Kitchen Wc And Internal Water Supply At Margao Under Ge Panaji Goa
Open Tender
Indian
Goa
GE PANAJI
04-02-2021

Tender Details

Welcome Maintenance Including Kitchen Wc And Internal Water Supply At Margao Under Ge Panaji Goa

Key Value

Document Fees
INR 500 /-
EMD
INR 20000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: WELCOME MAINTENANCE INCLUDING KITCHEN WC AND INTERNAL WATER SUPPLY AT MARGAO UNDER GE PANAJI, GOA
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 340 Sqm
2 2 Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid in cement mortar and rubbish off the premises complete all as specified and as directed. 6 Sqm
3 3 Material and labour for coloured ceramic glazed tiles of size 350x250x7mm or 450x350x7mm thick in vertical surface of wall, over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in white or coloured cement slurry to match the shade of tiles complete all as specified and as directed. 105 Sqm
4 4 Material and labour for coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface, including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. 135 Sqm
5 5 Material and labour for coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface, including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. 50 Sqm
6 6 Material and labour for 20mm thick granite stone tiles(of any type) machine cut, bedded and jointed with grey cement slurry over 15mm thick screed bed in cement mortar in 1:6 , and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing etc. complete all as specified and as directed. 5 Sqm
7 7 Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc. complete all as specified and as directed. 6 RM
8 8 Material and labour for machine cut cudappah stone slab 20-25mm thick over cement screed base in 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc. complete all as specified and as directed. 10 Sqm
9 9 Material and labour for chequered cement concrete tiles 20cmx20cmx25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. 25 Sqm
10 10 All as per item no.9 above but in vertical surfaces with 15mm thick backing coat in cement mortar 1:4 complete all as specified and directed. 15 Sqm
11 11 Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. 3.3 Cum
12 12 Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and directed. 3.3 Cum
13 13 Taking down cement plaster of any description from stone/ brick or concrete surface of wall/ ceiling etc including racking out joints, hacking for key scrubbing down with water complete all as specified and directed. 160 Sqm
14 14 Material and labour for rendering 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement and mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately. 75 Sqm
15 15 Material and labour for rendering 15mm thick plaster on fair faces of brick or concrete or stone masonry surfaces with cement mortar 1:6, finished even and fair without using extra cement complete all as specified and directed. 75 Sqm
16 16 Material and labour for rendering 10mm thick plaster on concrete surfaces of ceiling with cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed. 50 Sqm
17 17 Material and labour for applying two coats of weather proof acrylic emulsion exterior paint over a coat of weather proof acrylic emulsion exterior primer including preparation of new surfaces of walls etc. complete all as specified and directed. 75 Sqm
18 18 Material and labour for applying two coats of oil emulsion distemper paint over a coat of chalk whiting primer on wall preparatory to distember including preparation of new plastered surfaces of wall complete all as specified and directed. 75 Sqm
19 19 Material and labour for applying three coats of white wash including preparation of new plastered surfaces of ceiling complete all as specified and directed. 50 Sqm
20 20 Material and labour for applying one coats of weather proof acrylic emulsion exterior paint including preparation of old decorated surfaces of walls etc. complete all as specified and directed. 150 Sqm
21 21 Material and labour for applying one coat of oil emulsion distemper on old decorated surface of wall including preparation of surface by washing, rubbing down, and stopping of distempered and painted surface complete all as specified and directed. 200 Sqm
22 22 Material and labour for applying one coat of white wash on old decorated surfaces of walls and cornices including brooming, scrapping down with steel scrapper smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc complete all as specified and directed. 80 Sqm
23 23 All as per item No.22 above but applying one coat of white wash on ceiling complete all as specified and directed. 40 Sqm
24 24 Material and labour for applying one coat of synthetic enamel paint on old painted wood based surfaces of any description not otherwise described, over 10cm width or girth including preparation of surfaces complete all as specified and directed. 150 Sqm
25 25 Material and labour for applying one coat of synthetic enamel paint on old painted steel surfaces of any description not otherwise described, over 10cm width or girth including preparation surfaces complete all as specified and directed 50 Sqm
26 26 Material and labour for applying one coat synthetic enamel paint on old painted wood based surfaces of any description not otherwise described, not exceeding 10cm width or girth including preparation of surfaces complete all as specified and directed. 15 10 RM
27 27 Material and labour for applying one coat of synthetic enamel paint on old painted steel surfaces of any description not otherwise described, not exceeding 10cm width or girth including preparation surfaces complete all as specified and directed. 10 10 RM
28 28 Supply and fix aluminium alloy wire cloth 0.45 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples/ wooden beads and fixed in repairs complete all as specified and directed. 75 Sqm
29 29 Supply and fix in repairs galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with stainless steel wire staples etc. complete all as specified and directed. 86 Sqm
30 30 Hacking out old broken glass (any thickness size quality or description) from wooden or steel frame glazed fixed with putty or fixed with beads etc complete all as specified and directed. 20 Sqm
31 31 Supply and fix 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm each pane complete all as specified and directed. 10 Sqm
32 32 Supply and fix 4mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm each pane complete all as specified and directed. 5 Sqm
33 33 Supply and fix 4mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in squares n.exc 0.5 Sqm in each pane complete all as specified and directed . 5 Sqm
34 34 Supply and fix in repair 600 x 450mm size mirror of selected quality glass 5mm thick with PVC frame including key hole plates for hanging and fixed to wall with chromium plated screws complete all as specified and directed. 12 Each
35 35 Supply and fixing 15mm bore pillar tap swan neck type, left/right hand operating knob with 450mm long braided hose, complete all as specified and as directed .Make :Cat Part No.CON 123BKN/127BKN OF JAGUAR . 10 Each
36 36 Supply and fix wall mixer with provision of overhead shower with 115mm long bend pipe on upper side, connecting legs &wall flanges etc complete all as specified and directed. Make: Cart Part No. CON -273 KNUPR of JAGUAR. 4 Each
37 37 Supply and fix two way bib cock with wall flange etc complete all as specified and directed. Make: Cart Part No. CON -041KN of JAGUAR. 8 Each
38 38 Supply and fix angle stop cock with wall flange etc complete all as specified and directed. Make: Cart Part No. CON -059KN of JAGUAR. 4 Each
39 39 Supply and fixing PVC waste pipe of 32mm dia flexible type 1.2 m long,fitted to WHB or sink complete all as specified and as directed. 8 Each
40 40 Supply and fixing PVC connection 15mm bore size of length 600cm with PTMT nuts on both sides complete all as specified and as directed. 10 Each
41 41 Supply and fixing in repairs 15mm bore dia bib tap fancy type ,standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 15mm-105gms) . 65 Each
42 42 Supply and fixing in repairs 20mm bore pillar taps long body fancy type of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. 6 Each
43 43 Supply and fixing in repairs 150mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. 16 RM
44 44 Supply and fixing PVC (SWR) bends any radius complete all as specified and as directed. 2 Each
45 45 Supply and fixing PTMT grating 140mm dia complete all as specified and as directed. 5 Each
46 46 Supply and fixing CI floor trap with grating including jointing outlet of waste pipe & fixed in cement concrete 1:2:4 complete all as specified and as directed. 6 Each
47 47 Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed. 4.5 Cum
48 48 Material and labour for 75mm thick cement concrete 1:3:6 (type C-2) using 40mm graded stone aggregate as in plinth protection, joint filled with bitumen sand mixer 50mm thick, finished even and smooth without using extra cement complete all as specified and as directed. 25 Sqm
49 49 Material and labour for 40mm thick plain cement concrete 1:2:4, type B0, (12.5mm graded crushed stone aggregate) in floors surface finished even and fair with out using extra cement complete all as specified and as directed. 40 Sqm
50 50 Material and labour for providing plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete and under floor as sub base, etc. complete all as specified and directed. 1.2 Cum
51 51 Material and labour for closing bolt holes or other similar holes of any size in old asbestos cement sheets by sealing with one bitumen and one plain G.I. washer on either side and 8mm dia bolt and nut, bolt not exceeding 25mm in length complete all as specified and directed. 30 100 Nos
52 52 Taking down old steel tubing of 15mm bore pipe complete all as specified and as directed. 50 RM
53 53 Taking down old steel tubing of 20mm bore pipe complete all as specified and as directed. 45 RM
54 54 Supply and fix in repairs 15mm bore dia unplasticized PVC pipes of high pressure rating 10kgf/sq.cm etc all as specified and directed. 50 RM
55 55 Supply and fix in repairs 20mm bore dia unplasticized PVC pipes of high pressure rating 10kgf/sq.cm etc all as specified and directed. 45 RM
56 56 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.5Sqm each complete all as specified and directed. 12 Each
57 57 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. 8 Each
58 58 Supply and fixing second class hard wood plain solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. 0.6 Cum
59 59 Supply and fix 35mm thick, 2nd class hard wood, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and as directed. 9.7 Sqm
60 60 Supply and fix 35mm thick, 2nd class hard wood, glazed and skeleton door shutters open rebated and prepared to receive glass or gauge etc divided into square with framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass or gauges etc sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.24 (a) complete all as specified and as directed. 9.6 Sqm
61 61 Supply and fixing 40mm thick flush shutter solid core construction with block board core and plywood face panels, commercial and plywood face panels, commercial type on both sides complete all as specified and as directed. 9.5 Sqm
62 62 Material and labour for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube supplying and fixing in opening as per specification and drawing complete all as specified and directed. 23.5 RM
63 63 Material and labour for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC (c) channel PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock and bottom rail on either side as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded, sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed. 8 Sqm
64 64 Supply and fix mild steel 300 mm long Helical door spring in ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed. 5 Each
65 65 Supply and fixing 100mm long stainless steel butt hinges complete all as specified and as directed. 60 Each
66 66 Supply and fixing 150mm long aluminum anodized, barrel tower bolts of extruded section and fixed complete all as specified and as directed. 30 Each
67 67 Supply and fixing 125mm long aluminum anodized, barrel tower bolts of extruded section and fixed complete all as specified and as directed. 10 Each
68 68 Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. 30 Each
69 69 Supply and fixing 125mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. 10 Each
70 70 Supply and fix 250mm size aluminium alloy, anodized, sliding door bolt with hasp , staple (bolt type ) and fixing clips of sheet , cast or extruded section and fixing bolt & sliding bolt of extruded section or cast aluminium alloy etc complete all as specified and directed. 5 Each
71 71 Material and labour for preparation of new or previously untreated, wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. 90 Sqm
72 72 Mixing and applying SBR latex modified cement mortar 25mm thick in cement sand mortar in proportions of 1:3 (1 cement and 2 graded quartz aggregate) with polymer admixed in proportions as approved, including trowelling with wooden tools on prepared concrete surfaces of parent material complete all as specified and as directed (Note : Acrylic polymer will be paid for separately). 25 Sqm
73 73 Supply only approved SBR latex from FOSROC/ BASF/ DR FIXIT/ SIKA for SBR latex modified cement mortar (Note: Rate will be interms of solid contents of polymer). 5 Kg
74 74 Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for such as cover slab of manholes and septic tank, etc, reinforcement cut as required to facilitate demolition complete all as specified and directed. 1.5 Cum
75 75 Material and labour for reinforced cement concrete 1:2:4 type B1 (nominal mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. 0.8 Cum
76 76 Material and labour for form work to slabs supported on walls , beams, roof, chajjas, shelves, etc. for rough finished, flat surfaces of concrete complete all as specified and directed. 6 Sqm
77 77 Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 15 Kg
78 78 Material and labour for mild steel TMT bars 6mm to 8mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 10 Kg
79 79 Material and labour for preparing of surfaces of wood and wood based material new or old traded with tar or coal tar black paint treating ends of posts, back of chowkats etc are tarred exc 0.1 Sqm but not exc 0.5 Sqm each complete all as specified and as directed. 0.15 100Nos
80 80 Material and labour for preparation and treating small articles, area tarred n.exc 0.10 Sqm each such as hold fasts, end of posts, back of chowkhats etc complete all as specified and as directed. 0.6 100Nos
81 81 Suply only Integral Water proofing compound etc complete all as specified and directed. 5 Kg
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail