Public Works Department-PWD has published Special Repair Of Sikandrbad Dankaur To Tilbegampur Via Hasanpur , Kherpur , Salepur Link Road. Submission Date for this Tender is 19-01-2021. Road Work Tenders in BULANDSHAHR Uttar Pradesh. Bidders can get complete Tender details and download the document.
Name of Work: Special repair of Sikandrabad-Dankaur Road to Tilbegumpur via Hasanpur,Khairpur,Salepur Link Road | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Providing, laying, spreading and compacting stone aggregates of specific sizes 22.4-53 mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber required for proper completion of work as per direction of Engineer in charge and as per P.W.D. specification Including all type of taxes, octroi, tolls,cess but excluding cost of GST and as per direction of engineer incharge. | 46 | Cum | |
2 | 2 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, required for proper completion of work as per direction of Engineer in charge and as per P.W.D. specification Including all type of taxes, octroi, tolls,cess but excluding cost of GST and as per direction of engineer incharge. | 45 | Cum | |
3 | 3 | Providing and applying tack coat with Bitumen VG-10 grade pressure distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. Including all type of taxes, octroi, tolls,cess but excluding cost of GST and as per direction of engineer incharge. | 3741 | Sqm | |
4 | 4 | Providing laying & rolling of open graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6 mm aggregates using VG-10 Grade bitumen to required line ,grade and level to serve as wearing course on a previously prepared base, including mixing in a sutable plant, laying and rolling with a three wheel 80-100 Kn staic roller capacity finished to required level as per Technical specifican clause 508 Including all type of taxes, octroi, tolls,cess but excluding cost of GST and as per direction of engineer incharge. | 3741 | Sqm | |
5 | 5 | Providing and laying seal coat by manual means with VG-10 Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 but excluding GST Including all type of taxes, octroi, tolls,cess but excluding cost of GST and as per direction of engineer incharge. | 3741 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail