}

Special Repairs To Otm Accn Bldg No . Ht 363 Ht 374 And Ht 375 Or Line Of 1 4 Gr Under Ge North Ambala Cantt, Ambala Cantt-Haryana

Military Engineer Services-MES has published Special Repairs To Otm Accn Bldg No . Ht 363 Ht 374 And Ht 375 Or Line Of 1 4 Gr Under Ge North Ambala Cantt. Submission Date for this Tender is 01-02-2021. Building Repair Tenders in Ambala Cantt Haryana. Bidders can get complete Tender details and download the document.




Tender Notice

26615914
Special Repairs To Otm Accn Bldg No . Ht 363 Ht 374 And Ht 375 Or Line Of 1 4 Gr Under Ge North Ambala Cantt
Open Tender
Indian
Haryana
Ambala Cantt
01-02-2021

Tender Details

Special Repairs To Otm Accn Bldg No . Ht 363 Ht 374 And Ht 375 Or Line Of 1 4 Gr Under Ge North Ambala Cantt

Key Value

Document Fees
INR 500 /-
EMD
INR 71600.0 /-
Tender Value
Refer document

BOQ Items

Name of Work:SPECIAL REPAIRS TO OTM ACCN BLDG No. HT-363, HT-374 AND HT-375 (OR LINE) OF 1/4 GR UNDER GE (NORTH) AMBALA CANTT.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 SCHEDULE A PART I (B/R WORKS)\nDemolition of cement concrete (unreinforced) of any description, in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) and removal of debries to distance exc 50 mtr but n exc 100 mtr complete all as specified and as directed.\n 35 CUBIC \nMETRE
2 2 Material and labour for machine cut kota stone slab 16-18 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 20mm thick in cement mortar (1:4) base over 25mm PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed. 375 SQUARE METRE
3 3 Material and labour for machine cut kota stone slab 16-18 mm thick, laid in risers/ treads of steps with bull nosed edges, over and including cement rendering 10mm thick in cement mortar (1:4) base and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed. 4 SQUARE METRE
4 4 Demolition of reinforced cement concrete of any description and in any position including reinforcement cut as required to facilitate demolition and scraping, separating and cleaning of reinforcement and removal of debries to distance exc 50 mtr but n exc 100 mtr complete all as specified and as directed. 4 CUBIC \nMETRE
5 5 Material and labour for reinforced cement concrete (1:2:4) type B-1, using 20mm graded stone aggregates, as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. 3 CUBIC \nMETRE
6 6 Material and labour for reinforced cement concrete (1:2:4) type B-1, using 20mm graded stone aggregates, as in chajjas complete all as specified and directed. 0.8 CUBIC \nMETRE
7 7 Material and labour for mild steel TMT bars, Fe- 550D, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 300 KILOGRAM
8 8 Material and labour for mild steel TMT bars, Fe-550D, 5 mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 102 KILOGRAM
9 9 Material and labour for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs, etc. also splays between floors and beams, etc. in rough finished flat surfaces of concrete complete specified and directed. 24 SQUARE METRE
10 10 Material and labour for use and waste of formwork to chullal, hoods, chajjas, troughs and similar items including edges in rough finished flat surfaces of concrete complete specified and directed. 14 SQUARE METRE
11 11 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of debries to distance exc 50 mtr but n exc 100 mtr complete all as specified and as directed.\n 2.4 CUBIC \nMETRE
12 12 Material and labour for premium quality, joint free, glazed coloured ceramic tiles of size 300 x 450 x 7mm thick on vertical surfaces of walls over and including 10mm thick rough finished plaster in cement mortar (1:4), set, jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 292 SQUARE METRE
13 13 Material and labour for providing cement concrete 1:3:6 Type C1 using 20mm graded aggregate as in roof kerbs or mud stops, rounded or chamfered on edges, complete, all as specified and as directed. 16 CUBIC \nMETRE
14 14 Supply and fixing of pre-painted galvalume, aluminuim zinc coating, GI based corrugated steel sheet, 0.50mm thick, AZ-150 conforming to IS-15961, of red colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws including dismentaling old sheets of any descriptions as existing and removal from site complete all as specified and as directed. \nNote- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.\n 519 SQUARE METRE
15 15 Supply and fixing for pre-painted galvalume, aluminuim zinc coating, GI based Plain steel sheet, 0.50mm thick, of red colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws including dismentaling old sheets of any descriptions as existing and removal from site complete all as specified and as directed. \nNote- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.\n 45 SQUARE METRE
16 16 Dismantling timber scantlings 40 sq. cm and over in section in any position in unframed work and removal from site complete all as specified and as directed. 2.2 CUBIC \nMETRE
17 17 Dismantling timber scantlings 40 sq. em and over in section in any position in framed work and removal from site complete all as specified and as directed. 3.5 CUBIC \nMETRE
18 18 Supply and fixing of rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and as directed. \n 9000 KILOGRAM
19 19 Supply and fixing of mild steel screw bolts (machine made) 16 to 20mm neck dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 22.5cm and not exceeding 30cm long complete all as specified and as directed. 108 KILOGRAM
20 20 Supply and fixing of mild steel hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed.drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. 216 KILOGRAM
21 21 Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, and stacking of serviceable bricks and removal of debries to distance exc 50 mtr but n exc 100 mtr complete all as specified and as directed.\n 30 CUBIC \nMETRE
22 22 Material and labour for brickwork, with subclass 'B' bricks, straight or curved on plan to any radius, exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.\n\n 15 CUBIC \nMETRE
23 23 All as above Item No 21.00 but except bricks complete all as specified and as directed.\nNote: Old serviceable bricks as obtained from serial item No 21.00 hereinbefore shall be reused after cleaning the bricks. The rate quoted shall include for cleaning the bricks also.\n 15 CUBIC \nMETRE
24 24 Taking down cement or cement lime plaster, of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of debries to distance exc 50 mtr but n exc 100 mtr complete all as specified and as directed. 682 SQUARE METRE
25 25 Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without extra cement all as specified and as directed.\n 240 SQUARE METRE
26 26 Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without extra cement all as specified and as directed.\n 400 SQUARE METRE
27 27 Material and labour for rendering, 15 mm thick, in cement mortar 1:4, mixed with water proofing compound @ 2% by weight of cement or as per manufacturer’s instructions, on fair faces of brick work or concrete surfaces of any description finished even and smooth without using extra cement complete all as specified and as directed.\nNote: Supply only integral water proofing shall be measured and paid separately.\n 42 SQUARE METRE
28 28 Supply only integral water proofing compound complete all as specified and as directed. 40 KILOGRAM
29 29 Material and labour for rough cast plastering over and including 15mm thick rendering in CM 1:3 complete all as specified in Clause14.22 of MES Schedule Part-I and as directed.\nNote: 1. Rough cast finish shall be provided as under:-\nAfter applying under coat of CM 1:3 and while it is still in plactic state the rough cast mixture consisting of crushed stone or fine aggregate (which is generally of size between 4 to 8 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall be made slightly loose/wetter than normal for rendering to ensure that larger aggregates are thoroughly covered.\n2. Contractor's quoted rate shall include all above provisions and no extra shall be admissible on this account. 390 SQUARE METRE
30 30 Material and labour for preperation of newly plastered surfaces of walls, chajjas, roof projection, cornices etc. and applying using roller two coats of oil bound distemper over a coat of chalk whiting complete all as specified and as directed.\n 225 SQUARE METRE
31 31 Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.\n 95 SQUARE METRE
32 32 Material and labour for preperation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.\n 832 SQUARE METRE
33 33 Material and labour for PCC 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate), 75mm thick, as in plinth protection/PCC path and paving, laid in panels of area not exceeding 1.20 sqm with 12mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.\n 137 SQUARE METRE
34 34 Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish including removal of serviceable/unserviceable material from site complete all as specified and directed.\n 39 EACH
35 35 Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish including removal of serviceable/unserviceable material from site complete all as specified and directed.\n 7 EACH
36 36 Supply and fixing of steel window box type, using ERW hollow 'P' section, factory made, comprising double frame for and including gauged and glazed skeleton shutter, 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 of HQ CE Chandigarh Zone as applicable complete all as specified and as directed. \nNote: (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawings and one shop coat of zinc chromate primer . The pattern of grill shall be all as shown on drawing (iii) Glazing, wire mesh and painting shall be measured and paid for separately. (iv) The drawings may be referred from GE office or from this office during working hours.\n 42 SQUARE METRE
37 37 Supply and fixing of rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290.Gde-E-165 complete all as specified and as directed. 315 KILOGRAM
38 38 Supplying and Fixing for factory made 35mm thick, 2nd class HW, plain framed, panelled shutters (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. 13 SQUARE METRE
39 39 Supply and fixing of glazed and skeleton shutters made of 2nd class HW, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, elc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. 13 SQUARE METRE
40 40 Supply and fixing of aluminium anodised, 150mm long, barrel tower bolts of extruded section and fixed complete all as specified and as directed.\n 28 EACH
41 41 Supply and fixing of aluminium alloy, anodised, 300mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. 14 EACH
42 42 Supply and fixing of aluminium handles, 150mm, cast type, anodised complete all as specified and as directed.\n 28 EACH
43 43 Supply and fixing of second class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessaty labours; articles not exceeding 200 cu.cm each complete all as specified and directed.\n 14 EACH
44 44 Supply and fixing of mild steel bands, straps, supports or stays for rainwater, ventilating pipes, clamps; hold fasts; wall ties; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way traps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. 22 KILOGRAM
45 45 Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. 48 SQUARE METRE
46 46 Supply and fixing of sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm. in each pane complete all as specified and directed.\n 38 SQUARE METRE
47 47 Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, over a coat of red oxide zinc chrome primer complete all as specified and as directed.\n 261 SQUARE METRE
48 48 Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, complete all as specified and as directed.\n 261 SQUARE METRE
49 49 Supply and fixing of mild steel, cold rolled, butt hinges, 100mm size, medium weight, ISI marked and fixed complete all as specified and as directed.\n\n 42 EACH
50 50 Supply and fixing of mild steel, cold rolled, butt hinges, 50mm size, medium weight, ISI marked and fixed complete all as specified and as directed.\n\n 14 EACH
51 51 Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer complete all as specified and directed. 59 SQUARE METRE
52 52 Supply and fix GI Metal Suspended Ceiling System at all heights of Perforated with Fleece 600x600x0.5mm TEGULAR EDGE TILES in global white Powder Coated with 60-70 Micron front coating laid on 24mm wide Tee grid – strong section flanges colour white having stitching on the Main Runner, 600 mm and 600 mm Cross Tees with web height of 26mm. The tiles should have Humidity Resistance (RH) of 100%, with Light Reflection of 62%. The main runner spaced at 600 mm max (centre to centre) securely fixed to the structural soffit . Hangers (GI wire of 4 mm dia) to be fixed by approved roof plug, level adjusters and screws etc at 600x600 intervals.The First/Last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 600mm long cross tees to be interlocked between main runners to form 600 x 600 mm with grid module(24X38X0.3mm).Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 600 mm cross tees. Perimeter trim to be wall angles of size 3000x22x22mm, secured to walls at 450mm max (centre to centre), including PVC clips to hod the ceiling tile including taking down of old ceiling of any descriptions as existing at site complete, all as specified and as directed. 382 SQUARE METRE
53 53 Surface dressing not exceeding15cm deep and getting out in soft/loose soil and removal of debries to distance exc 1.5 Km but n exc 5 Km complete all as specified and as directed. 232 SQUARE METRE
54 54 Material and labour for hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed/rolled to a true surface complete all as specified and directed. 18 CUBIC \nMETRE
55 55 Material and labour for PCC (1:4:8) type D2 (using 40mm graded stone aggregates), 75 mm thick, as in sub base of floors, finished rough and even to receive floor topping complete all as specified and as directed. 232 SQUARE METRE
56 56 Material and labour, for vibratory compacted, precast cement concrete rubber moulded, coloured (except grey colour), interlocking designer paver blocks in milano shape, confirming to IS-15658-2006 of 60mm thickness, M-35 grade, as in path, hard standing, etc. laid over and including 25mm thick bedding layer of sand, complete all as specified and directed. 232 SQUARE METRE
57 57 SCHEDULE A PART II (E/M WORKS)\nTaking down carefully any type of point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, tube light fittings with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed. 232 POINT
58 58 Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLS-H, 1100 volts, ISI marked, PVC insulated and unsheathed stranded cable drawn through and including non metallic, medium grade PVC concealed conduit not less than 25.00mm to 32.00mm dia and its fittings, including cutting chasing on wall/ceiling, including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes, ISI marked including mild steel sunken boxes, made out of 1.6mm thick mild steel sheet, with earth dolly, coated with two coats of anti corrosive paint over a coat of red oxide primer internally, including 3mm thick plastic laminated sheet top cover extended upto 25mm over sunken box for housing the switch, sockets, fan regulators etc. with brass screws and brass washers, including 1.5 sqmm single core PVC insulated and unsheathed FRLS-H cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs complete all as specified and directed for one light point (For flourescent Tube/ LH, Bldg Security light, Mirror light)/fan point/bell point controlled by one one way switch complete all as specified and as directed.\nNotes :- (i) Switch, socket, ceiling rose, lamp holder, bell, bell push and fan regulators to be measured and paid for separately.\n(ii) PVC Conduit conforming to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only and surfaces shall be make good as per existing surfaces.\n\n 196 POINT
59 59 Description all as per Srl item No.58.00 here in before but for one 3 pin socket outlet point 5 Amp on same board. \n 24 POINT
60 60 Description all as per Srl item No.58.00 here in before but for one 3 pin socket outlet point 5 Amp on Independent board. \n 64 POINT
61 61 Description all as per serial item No. 58.00 above, but for one socket point, 3 pin, 15 Amps, on independent board, with 2.5 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, 1100 volts grade, ISI marked, including 2.5 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed.\nNote- Switch, Socket shall be measured and paid separately and Steel junction boxes shall be used wherever junction boxes are to be fitted. 8 POINT
62 62 Material and labour for sub main wiring with two single core, 6 sqmm, FRLS-H, 1100 volts grade, ISI marked, with multistranded, PVC insulated unsheathed copper conductor cable, drawn in and including rigid non metallic PVC conduit, medium grade, not less than 25 mm dia, ISI marked for housing cables, concealed in wall or ceiling including necessary cutting, chasing with machine and making good disturbed surfaces as per existing, with accessories with and including one additional 6 sqmm, PVC insulated, stranded copper conductor, FRLS-H, green colour for earth continuity conductor connected to common earth dolly including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed.\nNote- Three runs of cable and one run of concealed conduct shall be measured as one unit.\n 140 RUNNING METRE
63 63 Supply and fixing of switch piano, 15 Amps, flush type, single pole, one way, 230 volt, AC supply, ISI Marked complete all as specified and directed. \n 8 EACH
64 64 Supply and fixing of socket outlet, 2 in 1, 6 pin, 6/16 Amps, multipin, flush type,complete all as specified and directed. \n 8 EACH
65 65 Supply and fixing of switch piano, 5 Amps, flush type, single pole, one way, 230 volt, AC supply, ISI Marked complete all as specified and directed. \n 224 EACH
66 66 Supply and fixing of socket outlet, 3 pin, 6 Amps, single pole, 15 amps, 230 volts, flush type, ISI Marked complete all as specified and directed. \n 88 EACH
67 67 Supply and fixing of ceiling rose surface bakelite 65x50mm, three terminals complete all as specified and as directed.\n 140 EACH
68 68 Supply and fixing of lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings complete all as specified and as directed. \n 16 EACH
69 69 Supply and fixing of retrofit LED lamp/Bulb of 9 watt complete all as specified and directed. \n 16 EACH
70 70 Supply and fixing of Television (TV) socket outlet, 2/3 pin, 5 Amps, 230 volts complete all as specified and as directed.\n\n 4 EACH
71 71 Supply and fixing of rigid non-metallic PVC conduit, 20mm dia, exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth, tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.for passing TV cable concealed in wall/ceiling/floor etc. complete all as specified and directed. 24 RUNNING\nMETRE
72 72 Taking down ceiling/wall fan or exaust fan, of any type and description after disconnecting all electric connections carefully, sealing cable end, dismantling blades and removing fan and spray painting, washing with proper washing powder solution including filling cavities with filler material and matching with existing surface level finish, spray painting with two coats of super enamelled paint of approved colour after cleaning all dust, writing MES No with black colour permanent marker etc. and hanging ceiling/wall fan and fixing exaust fan at same or other location as directed and connecting up including provision of three core flexible cable 23/ 0.0076 size from ceiling rose to connector of fan drawn through PVC flexible conduit pipe and testing on fixing complete all as specified and as directed. \n 48 EACH JOB
73 73 Supply and fixing of electronic rotary stepped type fan regulator, 120 watt, 50 Hz, suitable for ceiling fan, any type/make/sweep complete all as specified and as directed. \n 48 EACH
74 74 Supply and fixing in replacement for down rod for ceiling fans, made out of GI pipe, medium grade, 20mm bore, of length upto 1.0 metre including fan clamps with rubber reel for each cut length for hanging of ceiling fans complete all as specified and as directed. \n 48 RUNNING METRE
75 75 Supply and fixing in replacement channel for fixing of LED tube rod, made of aluminium housing body in CRCA sheet, suitable for 18/20 watt LED tube light, high efficient, AC, 220-240 Volts, 50 Hz, with built in electronic drivers having THD < 10%, with and including T-8 LED tube rod 1x18/20 watts, AC, 220-240 Volts, 50 Hz, high efficient T-8 with aluminium extrusion heat sink for optimum performance with high lumen efficiency connecting up with core 1.5 sq mm flexible copper conductor cable from ceiling rose to connector block of light fitting including disconnecting and taking down existing light fitting and removal complete all as specified and directed.\n 60 EACH
76 76 Supply and fixing decorative surface mounted LED mirror light, high efficient diffuser, aluminium housing in CRCA body suitable and icluding 12 watt LED tube light, AC, 220-240 Volts, 50 Hz, connected with 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting complete including disconnecting and taking down existing light fitting and removal complete all as specified and as directed. 60 EACH
77 77 Supply and fixing of LED security light luminaire 30 watt, 230 volts, 50 Hz, made up of die cast aluminum housing with black epoxy powder coating with cover heat resistant glass, safety input voltage range 170 to 270 Volts, IP66 protection, including service brackets of GI pipe 25mm bore, light grade, of length 1.60 metre, bent to required shape, fixed with MS clamps of size 40 x 6mm flat iron strip, 150mm long and 4 Nos.8mm dia stainless steel bolts and nuts and washers and suitable reducer for connecting to GI pipe as required at site and making all required electrical connections using 3 core copper flexible cable from terminal box to ceiling rose including disconnecting and taking down of old fitting with bracket as existing complete all as specified and as directed.\n 12 EACH
78 78 Supply and fixing in replacement over and low voltage relay, 230 volts, single phase, adjustable from 170 volts to 230 volts in one module suitable for (1Ph+N) complete all as specified and directed. \n 8 EACH
79 79 Supply and fixing of MCB, single pole, 240 volts, 50Hz, breaking capacity 10kA, 'C' curve, 6-40 Amps, ISI marked complete all as specified and as directed. \n 40 EACH
80 80 Supply and fixing of MCB, single pole neutral, 240 volts, 50Hz, breaking capacity 10kA, 'C' curve, 40 Amps, ISI marked complete all as specified and as directed. \n\n 8 EACH
81 81 Supply, installation, commissioning and testing of SPN distibution board, 12 way, double door, IP 43, conforming to IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles and taking down of old DB as existing complete all as specified and as directed.\n 8 EACH
82 82 Supply and laying of LT underground cable, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 volts grade, with stranded aluminium conductor of size 2 core, 16 Sqmm and laying in trenches including disconnecting and taking down of old unserviceable existing cable and removal complete all as specified and as directed.\nNote: Excavation and earth work shall be measured and paid separately.\n 100 RUNNING METRE
83 83 Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for laying of cable complete all as specified and as directed. 14 CUBIC \nMETRE
84 84 Returning filling in, in soil, including spreading leveling watering and well ramming in layers not exceeding 25 cm each complete all as specified and as directed. 10 CUBIC \nMETRE
85 85 Removing excavated spoil/materials to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 metre above the starting point complete all as specified and as directed. 4 CUBIC \nMETRE
86 86 Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed. 4 CUBIC \nMETRE
87 87 Supply and laying un-reinforced, precast concrete cable cover, class LV type 1, Flat, with peak, size 250 mm x150 mm x40 mm complete all as specified and as directed. 333 EACH
88 88 Supply and fixing in replacement light grade, GI tubing, of size 40mm bore, for cable protection and fixed with clamp to pole and wall with nuts and bolts complete all as specified and as directed. \n 18 RUNNING\nMETRE
89 89 Taking out old unserviceable earthing and material and labour for new earthing complete with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm GI wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire and thimbles protected by galvanized steel pipe 15mm dia (light grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated including testing on completion complete all as specified and directed. 4 EACH \nJOB
90 90 Note:- Amount of credit of Rs. 90,334.00 for retrieved materials is mentioned in Schedule of Credit Page No. 15 of tender documents in pdf form which will be deducted offline while acceptance of tender.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail