Uttar Pradesh Power Transmission Corporation Limited-UPPTCL has published Erection And Commissioning Of 40Mva 132 33 Kv Power Tf ( Atlanta Make ) At 132 Kv Substation Sikandrarao Aligarh Under Etd Ii Aligarh. Submission Date for this Tender is 03-02-2021. Power Transformer Tenders in ALIGARH Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: ERECTION & COMMISSIONING OF ADDITIONAL 40MVA, 132/132 KV POWER T/F (ATLANTA MAKE) AT 132 KV SUBSTATION, SIKANDRARAO (HATHRAS) UNDER ETD-II, ALIGARH | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dragging of 40 MVA make M/s Atlanta T/F Main Tank from unloading site to T/F plinth at 132 KV S/s Sikandrarao approx. distance-25 Mtr. including turning of tank if required. | Job | 1 | Job |
| 2 | 2 | Complete erection of 40 MVA make M/s Atlanta T/F by erection of radiators, conservator tanks. all bushings their turrets connecting oil pipe lines, cooling fans, motor drive mechanism of tap changer, RTCC panel, and earthing of transformer, tap changer and marshaling box by M.S. Flat and all jumpering work etc to complete the job satisfactorily. | Job | 1 | Job |
| 3 | 3 | Earthing of main tank of 40 MVA T/F using M.S. Flat 50×6/75×10 mm size, its jointing with already laid earth mat/deltas preparing neutral bushing (HV & LV side both 02 Nos.) support for its earthing work. | Job | 1 | Job |
| 4 | 4 | Fabrication of delta of HV & LV neutral bushing inside the pit aftter dismantling the cemented brick floor in 33 KV switchyard and digging the pit size 1.5x1.5 mtr. Up to 01 mtr. Depth. Cutting 03 mtr. Long 03 Nos. MS round 40 mm by gas cutter and inserting inside the the earth in tringle shape at 01 mtr. distance connecting the upper end of these MR round with 75x10 mm MS flat and welding properly with neutral bushing by using 75x10 mm MS flat. Riffling the earth and refitting the cemented bricks of the floor after completion of work. | Job | 2 | Job |
| 5 | 5 | Centrifuging of transformer oil and filling of balance oil into transformer with machine and operator and to provide final BDV & PPM testing results. Centrifusing machine with operator and helper will be arranged by the contractor at his own cost. | Job | 18 | KL |
| 6 | 6 | Providing and fixing of MS wire mesh of size 7mtr × 3.2mtrs wire mesh size 1×1'' of 14SWG between 40MVA transformer and 33KV lighting arrestors. Work includes fabrication of frame of MS angle of size 65x65x6mm, supported by vertical MS angle of size 50x50x6mm at two place at equidistance. Similarly providing MS flat of size 50x6mm at two places at equidistance. Frames must be fabricated with 02no. legs of length 2.4mtrs of size 65x65x6mm M.S. angle. Each leg will be provided with a cleat of size 50x50x6mm MS angle of length 150mm. Grouting of legs will be done with concrete ratio of M15 upto 700mm with a chimmey size 300mm x 300 mm also earthing of wire mesh at two places with main mat through 25x6mm MS Flat. | Job | 1 | Nos |
| 7 | 7 | Painting of wire mesh with two coat of good quality red oxide paint & two coat of light grey colour paint of good quality as per direction of Supervising Engineer | BI01010001010000000000000515BI0100001113 | 1 | Job |
| 8 | 8 | Jumpring of T/F from HV with single Zebra and LV side with double zebra conductor from LV Bushing to 33 KV main bus. | BI01010001010000000000000515BI0100001113 | 1 | Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
