}

Proposed Construction Of Cement Concrete Work At Mondha Market Ram Mandir Area, Vaijapur-Maharashtra

Directorate Of Municipal Administration-DMA has published Proposed Construction Of Cement Concrete Work At Mondha Market Ram Mandir Area. Submission Date for this Tender is 29-01-2021. RCC Work Tenders in Vaijapur Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

26614393
Proposed Construction Of Cement Concrete Work At Mondha Market Ram Mandir Area
Open Tender
Indian
Maharashtra
Vaijapur
29-01-2021

Tender Details

Proposed Construction Of Cement Concrete Work At Mondha Market Ram Mandir Area

Key Value

Document Fees
INR 2000 /-
EMD
INR 34501.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Proposed Construction of Cement Concrete Work at Mondha Market Ram Mandir Area.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Proposed Construction of Cement Concrete Work at Mondha Market Ram Mandir Area. 1
2 2 Part A 2
3 3 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(Lift upto 1.5 m.) By Mechanical Means 3 102.38 Nos
4 4 Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. 4 81.9 Nos
5 5 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete 5 102.38 Nos
6 6 Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete 6 102.38 Nos
7 7 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite /quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 7 1.63 Nos
8 8 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete 8 682.5 Nos
9 9 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 9 7.959 Nos
10 10 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete 10 70.11 Nos
11 11 Providing and applying white-wash in one coat on old / new plastered or masonry surfaces In Rs and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc.complete. 11 349.6 Nos
12 12 Providing and applying Royale Luxury Emulsion of approved make on internal wall surface In Rs. as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying Asian / Berger / Nerolac / Dulex Paints or equivalent acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45 % or 65 to 70 % by roller. (With prior approval of S.E.)\n 12 1456 Nos
13 13 Providing and applying plastic emulsion paint of approved quality, colour and shade to old In Rs.\nsurface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc.complete. 13 349.2 Nos
14 14 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge 14 1 Nos
15 15 Part B 15
16 16 ITEM NO. : 2 Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness. 16 1 Number
17 17 ITEM NO. : 3 BASIC TEST OF AGGREGATE. Water Absorption, Specific Gravity.Impact Value Crushing Value.. 17 1 Number
18 18 ITEM NO. : 1 CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes). 18 5 Number
19 19 ITEM NO. : 4 BASIC TEST OF AGGREGATE. Sieve Analysis.. 19 1 Number
20 20 ITEM NO. : 5 FINE AGGREGATES. Fineness Modulus ( Sieve Analysis ), Silt & Clay Content 20 1 Number
21 21 ITEM NO. : 6 FINE AGGREGATES. Chloride & Sulphate Content. 21 1 Number
22 22 ITEM NO. : 7 FINE AGGREGATES. Silt Factor.... 22 1 Number
23 23 Royalty Charges for NATURAL SAND. Rate Inclusive of surcharge of 2% (141.34 + 2.82 + 14.13 = 158.29). 23 48.83 Cubic Metre
24 24 Royalty Charges for HARD MURUM , SOLING STONE , METAL . Rate Inclusive of surcharge of 2% (141.34 + 2.82 = 144.16, Say 144.15) 24 102.38 Cubic Metre
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail