Uttar Pradesh Power Transmission Corporation Limited-UPPTCL has published Construction Of Security Guard Room , Chainlink Fencing , Earth Filling In 33 Kv Switch Yard And Repairing Of Damaged Security Wall At 132 Kv Sub-Station Vrindavan , Mathura. Submission Date for this Tender is 27-01-2021. Switch Supply Tenders in Construction of Security guard room, Chainlink Fen Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: Bill of Quantity for Construction of Security guard room, Chainlink Fencing, Earth Filling in 33 KV Switch yard and Repairing of Damaged Security Wall At 132 kv Sub-Station Vrindavan, Mathura | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.5 Metre and lead upto 30 metre and including filling, watering, and ramming of excavated earth into the trenches or into the space between the building and the side of the foundation. (CSI No. 4.01) | 70 | Cum | |
| 2 | 2 | Local Fine sand of 1.25 F.M. filling in plinth including supply of necessary quantity of sand from a river/canal nearest to the site of work including watering, ramming and dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work. (CSI No. 4.08) | 5 | Cum | |
| 3 | 3 | Clearing Jungle including uprooting of rank vegetations, grass, bush wood, trees and saplings of girth upto 30 cm measured at a height of one meter above ground level and removal of rubbish upto a distance of 50 meters outside the periphery of area cleared. (CSI No. 4.09) | 100 | Sqm | |
| 4 | 4 | Earth filling under floors including cost of the earth when obtained from outside Corporation's area including its carriage, loading/unloading, spreading, watering and ramming in 20 cm layers and dressing of earth etc. Rates including cost of earth, labour, T&P and ROYALITY of earth etc. required for proper completion of the work. (CSI No. 4.10) | 10 | Cum | |
| 5 | 5 | Earth filling in Bulk in open areas including cost of the earth when obtained from outside Corporation's area including its carriage, loading/unloading, spreading, watering and ramming in 20 cm layers and dressing of earth etc. Rates including cost of earth, labour, T&P and ROYALITY of earth etc. required for proper completion of the work. (CSI No. 4.11) | 3500 | Cum | |
| 6 | 6 | Concrete with 4cm gauge down graded Stone ballast , coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundation and under floors and supply of all materials, labour, tools and plants etc. required for proper completion of the work. (CSI No. 5.01) | 10 | Cum | |
| 7 | 7 | Cement concrete with 2cm gauge Stone ballast, coarse sand and cement in the proportion 3:1.5:1 including supply of all materials, labour and T&P etc. required for proper completion of work. (CSI No. 5.04)\n | 10 | Cum | |
| 8 | 8 | Precast cement concrete door sills, Chaukhats, boundary posts, shelves and similar small work with cement, approved coarse sand and 20mm gauge down graded stone ballast in proportion of 1:1.5:3 excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 B.W.G. G.I. binding wire including the cost of binding wire, moulds and all other materials, labour and T&P etc. required for proper completion of the work. (CSI No. 5.06) | 1 | Cum | |
| 9 | 9 | RCC work with cement, approved coarse sand and 2cm (3/4”) gauge approved stone ballast in the proportion of 1:1.5:3 in the lintels or bends and sun shade of doors and windows excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 B.W.G. G.I. wire including necessary centering and smooth shuttering etc required for proper completion of work including supply of all material, binding wire, labour and T&P etc. (CSI No. 5.08) | 1 | Cum | |
| 10 | 10 | RCC work with cement, approved coarse sand and 2cm (3/4”) gauge approved stone ballast in the proportion of 1:1.5:3 for slab excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 B.W.G. G.I. wire including necessary centering and smooth shuttering etc required for proper completion of work including supply of all material, binding wire, labour and T&P etc. (CSI No-5.10) | 4 | Cum | |
| 11 | 11 | RCC work with cement, approved coarse sand and 2cm (3/4”) gauge approved stone ballast in the proportion of 1:1.5:3 for RCC raft foundation and footing. excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 B.W.G. G.I. wire including necessary centering and smooth shuttering etc required for proper completion of work including supply of all material, binding wire, labour and T&P etc. (CSI No-5.14) | 2 | Cum | |
| 12 | 12 | RCC work with cement, approved coarse sand and 2cm (3/4”) gauge approved stone ballast in the proportion of 1:1.5:3 for T-beam, columns and walls upto 1.50mt. Ht. ( Only web of T or L beam shall be measured). excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 B.W.G. G.I. wire including necessary centering and smooth shuttering etc required for proper completion of work including supply of all material, binding wire, labour and T&P etc. (CSI No-5.16) | 2 | Cum | |
| 13 | 13 | 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of work. (CSI No. 6.01) | 25 | Cum | |
| 14 | 14 | 1st class brick work in 1:4 cement and coarse sand of 2.25 F.M. mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of work. (CSI No. 6.02) | 10 | Cum | |
| 15 | 15 | 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortar in superstructure including supply of all material, labour and T&P etc. required for proper completion of work. (CSI No. 6.01+6.06) | 10 | Cum | |
| 16 | 16 | Supply and fixing of single leaf flush doors commercial quality conforming to I.S. 2202 part-I (1983) including fixing of wooden cleats and stoppers including cost of all materials labour, & T&P etc. required for the proper completion of the work. (CSI No. 8.24 b) (b) 32mm thick factory made panel | 2.5 | Sqm | |
| 17 | 17 | Mild steel or iron work in heavy small section like (J/U) hooks, holding down bolts, hold fast, tie rod, record recks, door/window frame, trench recks & edges, angle post etc. (when not included in overall rates) wrought to required form including supply of steel bolts, nuts, wastage etc. and their fixing charges, welding, required for proper completion of the work. (CSI No. 9.01) | 2 | MT | |
| 18 | 18 | Mild steel or iron work in heavy large size sections such as trusses, built-up gates, roof work, window/boundry grill or railing, trench covers, grating, T/F rail etc. wrought to required form including supply of steel bolts, nuts, wastage etc. and their fixing charges, welding, required for proper completion of the work. (CSI No. 9.02) | 1 | MT | |
| 19 | 19 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks, and authorized overlapping as required for proper completion of the work. (CSI No. 9.04) | 1 | MT | |
| 20 | 20 | Supply and fixing of 50X50mm. 8Gauge G.I. Chain link of approved quality of required height over M.S.Angle frame with M.S. flat, 10mm dia 40mm long nut bolts & washer and welding as required , Rate including cost of all material, labour and T&P etc. required for proper completion of work. (Excluding cost of M.S.Angle frame with M.S. flat) (CSI No 9.16) | 120 | Sqm | |
| 21 | 21 | Providing and Fixing Concertina coil fencing with required dia 600 mm up to 3m height of wall existing angle iron `Y' shaped placed 2.4 m or 3.00 m apart and with 6 horizontal R.B.T. stud tied with G.I. staples and G.I. clips to retain horizontal including necessary boltts or G.I barbed wire tied to angle iron all complete (No. of Rounds will be 8 in one meter length) as per direction of Engineer-in charge with reinforced barbed tape (R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/s.q.mm. with tape (0.52 mm thick) of supreme make or equivalent and weight 43.478gm/meter (cost of M.S. angle, C.C. blocks shall be paid separately) (CPWD S. I. No. 16.53) (CSI No 9.22) | 520 | RM | |
| 22 | 22 | 12mm thick plaster with cement mortar of 1 part cement & 4parts of approved coarse sand 2.5 F.M. over Brick work, min. thickness not less than 10mm including supply all material, labour and T&P required for proper completion of work. (CSI No. 11.05) | 300 | Sqm | |
| 23 | 23 | Add for extra labour and materials for plaster over rough face of one brick thick wall. (CSI No. 11.09) | 150 | Sqm | |
| 24 | 24 | 40mm thick 1:2:4 cement concrete floor with cement, approved coarse sand and 20mm graded stone aggregate laid in panels finished with 3mm floating coat of neat cement, over base concrete. Rate includes cost of all materials, labour and T&P required for proper completion of work but excluding cost of base concrete. (CSI No. 12.02) | 20 | Sqm | |
| 25 | 25 | Painting or varnishing on iron works in small areas of new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the ISI no. 103-1950. (CSI No. 13.01) | 150 | Sqm | |
| 26 | 26 | Same as in item 13.01 above but for every coat after Ist coat. (CSI No. 13.02) | 150 | Sqm | |
| 27 | 27 | Applying BIRLA PUTTY or equivalent putty on new interior or exterior surface over one coat of water base cement primer of ICI or equivalent brand for smoothning and leveling of the surface as per requirement and direction of E/I, including cost of all material,labour and T&P required for proper completion of work. (CSI No. 13.04) | 300 | Sqm | |
| 28 | 28 | Finishing walls with water proof exterior emulsion paint of APEX ULTIMA (ASIAN) / Weather Shield Max (ICI) or equivalent brand on already well prepared new wall surfaces with one coat of primer (ICI) followed by two coats of Apex/ Weather shield Max emulsion paint to give an even shade including thorough washing with water as per E/I direction including cost of all labour, material and T&P required for proper completion of work. (CSI No.-13.06 ) | 3000 | Sqm | |
| 29 | 29 | Same as in item 13.06 above but for every coat after Ist coat. (CSI No. 13.07) | 3000 | Sqm | |
| 30 | 30 | One priming coat & one coat synthetic/acrelic distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 13.09) | 50 | Sqm | |
| 31 | 31 | As in item no. 13.09 above but for every coat after the first coat. (CSI No. 13.10) | 50 | Sqm | |
| 32 | 32 | Dismantling plastered or unplastered brick work or stone masonry work in lime or cement mortar and inclduing stacking of materials as directed by Engineer-in-charge within a distance of 60 meters.(CSI No.15.01) | 5 | Cum | |
| 33 | 33 | Dismantling reinforced cement concrete or reinforced brick work or Cement.Concrete. including stacking of dismantled material as directed by the Engineer-in-charge within a distance of 60 metres.(CSI No.15.02) | 5 | Cum | |
| 34 | 34 | Dismantling existing plaster including disposal of refuse as directed by the Enginer-in-charge within a distance of 60 metres.(CSI No.15.06) | 1000 | Sqm | |
| 35 | 35 | Providing and Laying 80 mm thick factory made Interlocking CC tile M-25 grade over prepared subgrade with 50 mm thick fine sand layer making joints filled properly and finished in proper level and alignment including cost of all material, labour and T&P required for proper completion of work as per direction of E/I. (CSI No. 17.12) | 380 | Sqm | |
| 36 | 36 | Repair of plaster in patches upto one sqm. area including removal of old damaged surface of plaster, cleaning the same thoroughly and racking out joints to 1cm. Depth, watering the area and then replastering of mix 1:4 cement and coarse sand mortar and disposal of rubbish outside corporation area including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No.22.01) | 200 | Sqm | |
| 37 | 37 | Providing and fixing of P.V.C. pressure pipe (6 Kg/sq.cm.) for water supply mains with specials such as tee, bend, socket, elbow etc. including cutting of pipe wherever necessary and including excavation of trenches (450x600) mm for laying the pipe line and including its back filling after testing the pipe line including watering, ramming etc. complete including disposal of surplus earth from the site up to 100m as per direction of E/I including supply of all material, labour, T&P etc. required for proper completion of work. (CSI No. 24.47) a) 110 mm dia PVC pipe. | 10 | RM | |
| 38 | 38 | (c) 75 mm dia PVC pipe.(CSI No. 24.47(c )) | 10 | RM | |
| 39 | 39 | Wiring point for light with 1.5 sq mm FR PVC insulated multistrand single copper copper conductor cable in PVC coated Earth continuity wire and approved quality, piano type switch ceiling rose/angle/batten holder as per approved sample on 3 mm thick phenolic laminated bakelite sheet etc. of matching shade with wall colour complete in all respect. (PWDE SOR-01.04.2018 SR.138(C)) | 2 | Nos | |
| 40 | 40 | Wiring point for plug with 1.5 sq. mm FR PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall 14 SWG copper earth continuity wire and approved quality, piano type bell push or 2 pin socket as per approved sample etc. of matching shade with wall colour complete in all repects as per direction of E/I. (PWDE SOR-01.04.2018 SR.141(C)) | 2 | Nos | |
| 41 | 41 | Supply and wiring of submain with two number 2.5 sqmm FRLSH PVC insulated 1100 V grade multistrand copper conducter cable in 20 mm dia heavy single core copper conductor cable in 20 mm dia heavy duty(2mm thick)PVC conduit pipe on partly concealed in wall and partly laid in slab with one number 2.5 sq. Mm FR PVC insulated multistrand copper conductor cable as earth continuity wire etc.,complete in all respect. (PWDE SOR-01.04.2018 SR.291) | 5 | RM | |
| 42 | 42 | Supply and wiring of submain with two number 4.0 sqmm FRLSH PVC insulated 1100 V grade multistrand copper conducter cable in 20 mm dia heavy single core copper conductor cable in 20 mm dia heavy gauge PVC conduit on partly concealed in wall and partly laid in slab,with one number 14 SWG copper earth continuity wire,complete in all respect.(PWDE SOR-01.04.2018 SR.221(B)) | 5 | RM | |
| 43 | 43 | S/F of power plug with 15A/240V flush type switch and 5 pin 15A/250V flush type universal socket in suitable MS Box of 175 mmx100mmx50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. (PWDE SOR-01.04.2018 SR.1139)) | 3 | Nos | |
| 44 | 44 | Pebble dash plaster upto 10 m height above ground level with a mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. (DSR-2016 13.20)\n | 2650 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
