Public Works Department-PWD has published Repair Work Of Ramchandranagar Hospital At Kakdwip _Paray Samadhan_ , South 24 Pgs . Repairing Work Of Building Of Ramchandranagar Hospital At Kakdwip Block _Paray Samadhan_ , South 24 Parganas. Submission Date for this Tender is 20-01-2021. Building Repair Tenders in amchandranagar Hospital at Kakdwip, South 24 Pgs West Bengal. Bidders can get complete Tender details and download the document.
| Name of Work: Repairing work of building of Ramchandranagar Hospital at Kakdwip Block (PARAY SAMADHAN), South 24 Parganas. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m\nIn ground floor including roof. | 1 | 3.108 | Cu.M. |
| 2 | 2 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.\n(a) In ground floor including roof. | 2 | 2 | Cu.M. |
| 3 | 3 | Dismantling carefully terraced floor only (including floor finish if any) or lime terracing in ground floor roof and removing rubbish as directed within a lead of 75 m.\nIn ground floor | 3 | 21.727 | Cu.M. |
| 4 | 4 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.\nIn ground floor | 4 | 4.35 | Cu.M. |
| 5 | 5 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. | 5 | 1026.71 | Sq.M. |
| 6 | 6 | Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge.\na) 20 mm thick\n | 6 | 15 | Sq.M. |
| 7 | 7 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. | 7 | 31.08 | Sq.M. |
| 8 | 8 | (I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (A) [Pakur Variety] | 8 | 1.156 | Cu.M. |
| 9 | 9 | Brick work with 1st class bricks in cement mortar (1:6)\n (a) In foundation and plinth | 9 | 1.25 | Cu.M. |
| 10 | 9.01 | (b) In superstructure, 3rd floor | 9.01 | 4.35 | Cu.M. |
| 11 | 10 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. | 10 | 3.75 | Sq.M. |
| 12 | 11 | (a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department] | 11 | 220 | Sq.M. |
| 13 | 12 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.\n(i) Pakur Variety ground floor\n | 12 | 15.366 | Cu.M. |
| 14 | 13 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] \n (i) With 1:6 cement mortar\n(c) 15 mm thick plaster\n | 13 | 436.068 | Sq.M. |
| 15 | 13.01 | (b) 20 mm thick plaster\n | 13.01 | 330.287 | Sq.M. |
| 16 | 13.02 | (i) With 1:4 cement mortar\n(c) 15 mm thick plaster\nIn Ground Floor | 13.02 | 139.2 | Sq.M. |
| 17 | 13.03 | (b) 10 mm thick plaster\n | 13.03 | 215.09 | Sq.M. |
| 18 | 14 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc.\nNOTE : Cement 0.152 cu.m. per 100 sq.m. | 14 | 34.2 | Sq.M. |
| 19 | 15 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.\n(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. \n 16 kgs./Sq.M. | 15 | 2.1 | Qntl. |
| 20 | 16 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.\nIn ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement\n (ii) 25 mm. Thick | 16 | 15.54 | Sq.M. |
| 21 | 17 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately)\n(a) Upto area 2.5 Sq.m | 17 | 32.11 | Sq.M. |
| 22 | 18 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).\n (e) Sal : Malayasian | 18 | 0.351 | Cu.M. |
| 23 | 19 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria.\n(i) 66mm x 90mm | 19 | 19.8 | Mtr. |
| 24 | 20 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)\n(a) 40mm X 6mm, 250mm Length | 20 | 84 | Each |
| 25 | 21 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hige and other fittings.\n(In case of non-supply of single plank, penal rate of reduction of 20% will be made)\n(iii) 35mm thick shutters with 19mm thick panel of size 30to 45 Cm.\n(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.\ni) Gr Floor | 21 | 14.255 | Sq.M. |
| 26 | 22 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. In ground floor.\n(i) 32 mm thick | 22 | 6.015 | Sq.M. |
| 27 | 23 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:\n(iv) 150mm long x 10mm dia. Bolt | 23 | 24 | Each |
| 28 | 23.01 | (ix) 300mm long x 10mm dia. bolt. | 23.01 | 4 | Each |
| 29 | 24 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.\n(iii) 300mm x 16mm dia. bolt. | 24 | 2 | Each |
| 30 | 25 | Anodised aluminium butt hinges of approved quality manufactured from extruded\nsection conforming to I.S. specification (I.S. 205/66) and fitted and fixed with\ncadmium plated screws:\n(v) 100 x 63 x 3.2mm. | 25 | 36 | Each |
| 31 | 26 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:\n(a) With continuous plate base (Hexagonal / Round rod)\n(vi) 150 mm grip x 10 mm dia rod. | 26 | 28 | Each |
| 32 | 27 | (b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) in ground floor. | 27 | 666.3 | Sq.M. |
| 33 | 28 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)\n(a) One Coat\nii) Solvent based interior grade Acrylic Primer | 28 | 400 | %Sq.M. |
| 34 | 29 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC\n(a) One Coat | 29 | 221 | %Sq.M. |
| 35 | 30 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.\nTwo Coat | 30 | 221.98 | Sq.M. |
| 36 | 31 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) \ni) Standard Quality | 31 | 444.71 | Sq.M. |
| 37 | 32 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | 32 | 29.74 | Sq.M. |
| 38 | 32.01 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc | 32.01 | 85 | Sq.M. |
| 39 | 33 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :\n(a) On timber or plastered surface :With super gloss (hi-gloss) \n(iv) Two coats (with any shade except white) | 33 | 85 | Sq.M. |
| 40 | 33.01 | (b) On steel or other metal surface :\nWith super gloss (hi-gloss) \n(iv) Two coats (with any shade except white) | 33.01 | 29 | Sq.M. |
| 41 | 34 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.\nA) UPVC Pipes:\n(ii) 110 mm. Dia | 34 | 21 | Mtr. |
| 42 | 34.01 | B) UPVC Fittings:\n(ii) 110 mm. Dia. | 34.01 | 6 | Each |
| 43 | 34.02 | d) Shoe\n(ii 110 mm. Dia. | 34.02 | 6 | Each |
| 44 | 35 | Sanitary & Plumbing\nLabour for dismantling G.I. pipe with fittings.\n(i) 15 mm | 35 | 24 | Mtr. |
| 45 | 35.01 | (iii) 25 mm | 35.01 | 24 | Mtr. |
| 46 | 35.02 | (v) 40 mm | 35.02 | 15 | Mtr. |
| 47 | 36 | Dismantling H.C.I. pipe with fittings including melting lead caulked joints.\n(iii) 100 mm | 36 | 18 | Mtr. |
| 48 | 37 | Dismantling door of H.C.I. bend or junction and taking out broken nuts by drilling and refixing the same with new nuts including putty joints complete. | 37 | 4 | Each |
| 49 | 38 | Dismantling Indian W.C. including taking out base concrete as necessary. | 38 | 4 | Each |
| 50 | 39 | Dismantling wash basin with brackets with or without waste fittings. | 39 | 4 | Each |
| 51 | 40 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)\n(a) For Exposed Work -- PVC Pipes (Dia)\n40 mm | 40 | 14 | Mtr. |
| 52 | 40.01 | (b) For Concealed Work\n15 mm | 40.01 | 25 | Mtr. |
| 53 | 40.02 | 20 mm | 40.02 | 15 | Mtr. |
| 54 | 40.03 | 25 mm | 40.03 | 20 | Mtr. |
| 55 | 41 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).\n(vii) 25 mm dia | 41 | 2 | Each |
| 56 | 41.01 | (v) 40 mm | 41.01 | 1 | Each |
| 57 | 41.02 | (viii) 20 mm | 41.02 | 2 | Each |
| 58 | 42 | Supplying, fitting and fixing bib cock or stop cock.\n(a) (ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar). | 42 | 6 | Each |
| 59 | 42.01 | (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar). | 42.01 | 6 | Each |
| 60 | 43 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer\n(b) 1000 litre capacity | 43 | 1 | Each |
| 61 | 44 | Labour for hoisting plastic water storage tank.\n(i) Upto 1500 litre capacity. | 44 | 2 | Each |
| 62 | 45 | Labour for punching hole in plastic water storage tank upto 50 mm dia | 45 | 8 | Each |
| 63 | 46 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.\n(ii) 550 mm X 400 mm size | 46 | 2 | Each |
| 64 | 47 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc.\n(a) With 'P' trap (with vent) | 47 | 2 | Each |
| 65 | 48 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).\n(i) 450 mm X 350 mm | 48 | 2 | Each |
| 66 | 49 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.\n(b) Anglo Indian\n(ii) Plastic (hallow type) white | 49 | 2 | Each |
| 67 | 50 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.\n(ii) 600 mm X 450 mm | 50 | 4 | Each |
| 68 | 51 | Supplying, fitting and fixing soap holder. \n(b) Fibre glass | 51 | 4 | Each |
| 69 | 52 | Supplying, fitting and fixing liquid soap container.\n(b) PTMT(Prayag or equivalent) | 52 | 4 | Each |
| 70 | 53 | Supplying, fitting and fixing towel rail with two brackets.\n(a) C.P. over brass\n(ii) 25 mm dia. and 600 mm long | 53 | 4 | Each |
| 71 | 54 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992\n(A) (i) Single Socketed 3 Meter Length | 54 | 28.8 | Mtr. |
| 72 | 54.01 | (ii) Double Socketed 3 Meter Length | 54.01 | 14.4 | Mtr. |
| 73 | 54.02 | (iii) Single Socketed 1.8 Meter Length | 54.02 | 3.6 | Mtr. |
| 74 | 54.03 | (iv) Double Socketed 1.8 Meter Length | 54.03 | 3.6 | Mtr. |
| 75 | 54.04 | (B) Fittings\n(i) Coupler\n(b) 110 mm | 54.04 | 4 | Each |
| 76 | 54.05 | (iii) Door Tee\n(b) 110 mm | 54.05 | 4 | Each |
| 77 | 54.06 | x) Bend 87.5º\n (b) 110 mm | 54.06 | 4 | Each |
| 78 | 54.07 | xv) Vent Cowl\n (b) 110 mm | 54.07 | 2 | Each |
| 79 | 54.08 | xvi) Pipe Clip\n (b) 110 mm | 54.08 | 16 | Each |
| 80 | 54.09 | xx) 125/110 P Trap with W.C. Ring | 54.09 | 16 | Each |
| 81 | 55 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials. \n(A) Above ground\n(ii) 110 mm dia. | 55 | 20 | Mtr. |
| 82 | 55.01 | (B) Under ground\n(ii) 110 mm dia. | 55.01 | 20 | Mtr. |
| 83 | 56 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. | 56 | 4 | Each |
| 84 | 57 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.\n(i) 600 mm long | 57 | 16 | Each |
| 85 | 58 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.\n(i) 600 mm long | 58 | 8 | Each |
| 86 | 59 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.\n(a) Sink only\n(ii) 630 mm X 550 mm X 180 mm | 59 | 1 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
