}

Provision Of 02 Toilet And Bathroom And Allied Services And Certain Revenue And Minor Works At Barrackpore Under Ge Barrackpore, Barrackpore-West Bengal

Military Engineer Services-MES has published Provision Of 02 Toilet And Bathroom And Allied Services And Certain Revenue And Minor Works At Barrackpore Under Ge Barrackpore. Submission Date for this Tender is 30-01-2021. Toilet Bathroom Tenders in Barrackpore West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

26593252
Corrigendum : Provision Of 02 Toilet And Bathroom And Allied Services And Certain Revenue And Minor Works At Barrackpore Under Ge Barrackpore
Open Tender
Indian
West Bengal
Barrackpore
30-01-2021

Tender Details

provision Of 02 Toilet And Bathroom And Allied Services And Certain Revenue And Minor Works At Barrackpore Under Ge Barrackpore

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 20-Jan-2021 Corrigendum No.1 BOQ 30-01-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 80000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: PROVN OF 02 TOILET AND BATHROOM AND ALLIED SERVICES AND CERTAIN REVENUE AND MINOR WORKS AT BARRACKPORE UNDER GE BARRACKPORE
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Taking down cement plaster of any description on brick or stone or concrete surface of wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 10 SQM
2 2 Demolition of cement concrete (unreinforced) in ground floor not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. 3.45 CUM
3 3 Demolition of cement concrete (unreinforcement) of any description and in any position not otherwise specifically provided for complete all as specified and directed. 1.5 CUM
4 4 Surface excavation in soft /loose soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed 526 SQM
5 5 Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation or for shafts, well, cesspits, pier holes, laying of cable etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and directed. 100.5 CUM
6 6 Excavation over area, not exceeding 1.5 m deep and getting out complete all as specified and directed . 21.5 CUM
7 7 Returning, filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed. 86 CUM
8 8 Removing of excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting points in soft/loose soil complete all as specified and directed. 110 CUM
9 9 Excavating in post holes (or similar holes) in soft /loose soil each not exceeding 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, iln layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed. 52 EACH
10 10 Spreading, levelling and ramming including watering in floors etc layers not exceeding 25 cm thick (material obtained from excavated materials) complete all as specified and directed. 4.9 CUM
11 11 M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. 12.55 CUM
12 12 M&L for broken stone or boulders hardcore of gauge not exceeding 63mm, deposited spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed. 43.5 CUM
13 13 M&L for broken brick hardcore of gauge not exceeding 63mm, deposited spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed. 28.05 CUM
14 14 M&L for PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. 10.5 CUM
15 15 M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) used as in foundation, filling and mass concrete, subbase of floor complete all as specified and directed. 4.35 CUM
16 16 M&L for PCC (1:2:4) type B-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. 2.4 CUM
17 17 M&L for plain cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in edges of interlocking pavers to making slope interlocking surface to ground level complete all as specified and directed. 1 CUM
18 18 M&L for precast reinforced cement concrete (1:1.5:3) type A1 (using 20 mm graded crushed stone aggregate) as in cover slab of drain/manhole set in cement mortar (1:6) complete all as specified and directed. \n(NOTE: Cost of Form Work is deemed to be inclusive of unit rate quoted by the contractor & reinforcement shall be measured & paid Separately.) 2.3 CUM
19 19 M&L for RCC M-25 (design mix) (using 20mm graded stone aggregate) as in foundations including rafts, footings, foundations beam, plinth beams, bases for columns etc , basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed. 3.25 CUM
20 20 M&L for RCC M-25 (design mix) (using 20mm graded stone aggregate) as in column, pillar, piers, post and struts etc complete all as specified and directed. 2.3 CUM
21 21 M&L for RCC M-25 (design mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed. 5.7 CUM
22 22 M&L for RCC M-25 (design mix) (using 20mm graded aggregate) used as in slab supported on walls, beams and columns in floors roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. 4.2 CUM
23 23 M&L for RCC M-25 (design mix) (using 20mm graded stone aggregate) as in chajja etc complete all as specified and directed. 0.18 CUM
24 24 M&L for RCC (nominal mix) (1:1.5:3) type A1 (using 20mm graded crushed stone aggregate) as in foundations including rafts, footings, foundation beam, plinth beams, bases for columns etc , basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed. 3 CUM
25 25 M&L for RCC (nominal mix) (1:1.5:3) type A1 (using 20mm graded crushed stone aggregate) as in column, piller, piers, post and struts etc complete all as specified and directed. 1.25 CUM
26 26 M&L for RCC (nominal mix) (1:1.5:3) type A1 (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed. 1.25 CUM
27 27 M&L for cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in coping, bed plates, kerbs or mud stops, top of chajjas, basement for water tank etc rounded or chamfered on edges including necessary form work finishing the surface even and fair with using extra cement complete all as specified and directed. 1.5 CUM
28 28 M&L for cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. 0.4 CUM
29 29 M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. 8 RM
30 30 M&L for granite or trap stone kerb of roughly squared stones of size 20cmX30cm dressed so that the maximum depression from a straight edge held against the dressed surfaces shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar (1:6) and struck flush complete all as specified and directed. 47 RM
31 31 M&L for cutting chases, in brick wall and making good to facing where required and pointing in cement mortar (1:3), to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing etc and making good the disturbed surface, cutting not exceeding 10cm girth complete all as specified and directed. 17 RM
32 32 M&L for cutting holes into or through brick walls built in cement mortar and making good in cement mortar (1:3) or concrete (1:2:4) type B1 as required for superficial area exceeding 150 sqcm & not exceeding 400 sqcm complete all as specified and directed. 60 PER CENTIMETER OF DEPTH (OF CUTTING)
33 33 M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and directed. 74.74 CUM
34 34 M&L for brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed. 48 SQM
35 35 Supply only integral water proofing liquid, ISI marked complete all as specified and directed. 16 LITRE
36 36 M&L for forming square grooves in plaster not exceeding 12mm deep and not exceeding 15mm on face complete all as specified and directed. 2.2 RM
37 37 M&L for form work to sides of concrete foundation, footing, base of column, raft & plinth beam for flat, rough finish surface of concrete complete all as specified and directed. 23 SQM
38 38 M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc for flat, rough finish surface of concrete complete all as specified and directed. 48 SQM
39 39 M&L for form work to sides of pillar, posts, struts, piers, columns and stanchions for flat, rough finish surface of concrete complete all as specified and directed. 45 SQM
40 40 M&L for formwork to the soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200 mm thick (horizontal or sloping ) and making flat, rough finished surfaces of concrete complete all as specified and directed 37 SQM
41 41 M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges for flat, rough finish surface of concrete complete all as specified and directed. 1.8 SQM
42 42 M&L for second class hard wood in fillets, square, rectangular or triangular in section, clean swan, fixed with nails, sectional area exceeding 13 sqcm but not exceeding 25 Sqcm complete all as specified and directed. 60 RM
43 43 S&F for factory made solid PVC door frame of size 50mm X 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified and directed. 19 RM
44 44 S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed. 9.8 SQM
45 45 S&F for 100mm long stainless steel butt hinges with hinge pin complete all as specified and directed. 24 EACH
46 46 S&F for 100 mm long mild steel butt hinges, medium weight complete all as specified and directed. 3 EACH
47 47 S&F for 75 mm long mild steel butt hinges, medium weight complete all as specified and directed. 16 EACH
48 48 S&F for 250 mm aluminum alloy, anodised , sliding door bolt with hasp and staple (bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and directed. 2 EACH
49 49 S&F for 200 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 9 EACH
50 50 S&F for 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 2 EACH
51 51 S&F for 100 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 32 EACH
52 52 S&F for 150 mm long aluminium anodised extruded alloy handle fabricated type complete all as specified and directed. 12 EACH
53 53 S&F for 75 mm long aluminium anodised extruded alloy handle fabricated type complete all as specified and directed. 28 EACH
54 54 S&F for stainless steel wire cloth, 0.36 mm nominal dia of wire & average width of aperture 1.40mm & fixed with stainless steel wire staple/ wooden beads in steel window/ventilators complete all as specified and directed. 3 SQM
55 55 S&F for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel (heavy duty) complete all as specified and directed. 5 EACH
56 56 S&F for 75 mm mortice lock vertical type of brass with 4 lever completed all as specified and directed. 22 EACH
57 57 S&F for 100 mm mortice lock vertical type of brass with 4 lever completed all as specified and directed. 7 EACH
58 58 S&F for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and directed. 11 EACH
59 59 S&F for continuous piano type hinges mild steel bright finish or electro galvanised, size of flap (when open) 30mm complete all as specified and directed. 30 RM
60 60 S&F for ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed. 36 EACH
61 61 S&F for 100 mm long hasp and staple, mild steel, wire type, stove enamelled, black including bolt to hinge plate and fixed with screws complete all as specified and directed 14 EACH
62 62 S&F for auto closing hinges fixing with particle board with approved size and design complete all as specified and directed. 26 EACH
63 63 M&L for TMT bars 10 mm dia and over cut to length bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. 1451 KG
64 64 M&L for TMT bars 6mm to 8mm dia and over cut to length bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. 161 KG
65 65 M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. 455 KG
66 66 S&F for Steel ventilators, fixed type, with glazing bars including one coat of red oxide zinc chrome primer at factory complete all as specified and directed. 3 SQM
67 67 S&F for rolled mild steel angle iron roof trusses (framed) and purlins, rafters crane gantries, rails, heavy brackets etc including distance pieces, cleats, angle, tee etc including necessary cutting , welding etc complete Fe-410W (Gde E-250) quality 'A' complete all as specified and directed. 2695 KG
68 68 M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or forged into spikes; framed guard bars; barred iron doors; ladders, railings, framed brackets, walk ways, frame work of water tank and similar work conforming to Fe-290-0 Gde-E-165 complete all as specified and directed. 460 KG
69 69 S&F for rolled mild steel as in joist, channel, angle or tee section, fixed independently with connecting base plate etc strut bend to shape, holes drilled/notches cut out to received MS bolts and barbed wire, embedded to concrete including tarring to steel work embeded to concrete complete all as specified and directed. 40 KG
70 70 S&F for anodised (powder coating of minimum thickness 50 micron) aluminum frame for doors , windows, ventilators with one or more rebates (sliding & fixed type) complete all as specified and directed 261.5 KG
71 71 S&F for anodised (powder coating of minimum thickness 50 micron) aluminium door shutters (powder coated), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. 13.7 SQM
72 72 S&F for anodised (powder coating of minimum thickness 50 micron) aluminium window/ventilators shutters, sliding/fixed type without sash bar, aluminum section weighing 0.55 Kg/m, including necessary joining cleat, glazing clips, rubber neoprene packing, hinges type B-21 100 mm long (02 Nos), peg stay 150mm long (01 No), anodised aluminium snap beading, screws etc complete locking arrangement, roller all as specified and directed. 0.6 SQM
73 73 M&L for applying evenly a coat of bitumen primer on roof, canopy, chajja, parapet (vertical surface etc) @ 0.40 Litre / Per Sqm by the same membrane manufacturer of density 250C, 0.87 to 0.89 litre and viscosity 70-160 cps after proper cleaning the roof surfaces (horizontal/vertical) and providing APP based polymeric membrane minimum weighing 3.6 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150 gms / sqm) laid on primed surface with side over lap of 80 mm and end overlap of 100 mm, using bitumen torch or by LP gas torching and sealing all joints etc and ensuring complete thermo fusing and applying one coat of aluminum paint over it complete all as per manufacturer's instructions complete all as specified and directed. 4 SQM
74 74 S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour as approved by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 204 SQM
75 75 S&F for 18/19mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work including teakwood lipping all round as in cup board or drawer complete all as specified and directed. 78 SQM
76 76 S&F for 12mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work including teakwood lipping all round as in cup board or drawer complete all as specified and directed. 80 SQM
77 77 S&F for 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including teakwood lipping all around as in cup board, kitchen cabinet etc complete all as specified and directed. 51 SQM
78 78 S&F for false ceiling with exposed metal (PPGI) framework/ “Tee” Grid providing and fixing of suspended Tee gird false ceiling using “T” Gird System – powder coated GI (PPGI) exposed grid false ceiling suspension system in grid size 600mm x 600mm with main runner 32 x 24mm x 0.3mm thick, cross tee 26mm x 24mm x 0.3mm thick and wall angle 24mm x 24mm x 0.40mm thick using 4mm thick non asbestos fibre cement board (Make: Everest, type/pattern -oceanic or equivalent of Armstrong/Charminar) of size 595 x 595mm, an asbestos Free fibre cement board manufacture using high Pressure System Curing technology. T gird Framing is suspended using 4mm GI/MS bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip, also providing provisions for light fixtures, air conditioning diffusers and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at not more that 300mm from the adjacent wall. 1220mm/600mm Cross Tee to be interlocked between main runners @ 600mm c/c, so as to from 600mm x 600mm or 1200mm x 600mm grid, confirming IS 14862 & type B category III of ISO 8336, tested as per AS 1530 part – 3 & B. S- 476 part 4,5,6,7 & 8 should be placed in Gird module to form complete as per the drawing & directions of Engineer-in-Charge. 35 SQM
79 79 M&L for 100mm thick PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in subbase of floor complete all as specified and directed. 118 SQM
80 80 M&L for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in subbase or floor complete all as specified and directed. 90 SQM
81 81 M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate), as in sub base finished the concrete surfaces rough complete all as specified and directed. 128 SQM
82 82 M&L for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection etc including finishing the cement concrete surface even and smooth without using extra cement complete all as specified and directed. 35 SQM
83 83 M&L for 25mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) for laying floor finishing and finished the surface rough complete all as specified and directed. 16 SQM
84 84 M&L for 25mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in floor finishing the surface even and smooth without using extra cement complete all as specified and directed. 6 SQM
85 85 M&L for 40 mm thick cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floor/paving etc finished even and smooth without using extra cement complete all as specified and directed. 5 SQM
86 86 M&L for 50 mm thick cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in flooring etc, finished the surface even and smooth with using extra cement complete all as specified and directed. 90 SQM
87 87 M&L for 75 mm thick cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floor/paving/hardstanding etc finished the surface even and fair by brooming complete all as specified and directed. 119 SQM
88 88 M&L for 100mm thick cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floor/paving etc complete all as specified and directed. 227 SQM
89 89 M&L for 60mm thick machine pressed precast concrete interlocking paver block of any shape and size with grey cement and pigment confirming to IS 15658-2008 (M-35 grade) over 50mm thick compacted sand cushioning complete all as specified and directed. 104 SQM
90 90 M&L for non skid (joint free) ceramic coloured (colour & shade as approved by GE) tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in colour cement to match over and including 15mm thick Screed bed or beading layer of cement mortar (1:6) for laying floor finishes complete all as specified and directed. 23 SQM
91 91 S&F for glazed ceramic coloured wall tiles (vertical) 450mm x 350mm x 7mm thick / 350mm X 250mm X 7mm (colour, shade & size as approved by GE) set and jointed neat cement slurry and pointed in colour cement to match over and including 10 mm thick plaster of cement mortar (1:4) complete all as specified and directed. 63 SQM
92 92 M&L for 20mm thick granite (any type) work (table rubbed and polished) machine cut in steps, jambs, pillars, window cill, cooking platform etc bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the granite stone including and polishing over and including 15mm thick cement mortar (1:4) complete all as specified and directed. 7 SQM
93 93 M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. 15.2 RM
94 94 M&L for pre-polished coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick (glossy type), set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 20 mm thick cement screed bed in cement mortar (1:6) complete all as specified and directed. 28 SQM
95 95 M&L for machine cut cudappah stone slab flooring 20-22mm thick in single piece in platform of WHB of similar work, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick cement screed bed in cement mortar (1:6) complete all as specified and directed. 8 SQM
96 96 M&L forming contraction joints (dummy) 75mm deep X10mm wide, filled with sealing compound of Grade 'A' complete all as specified and directed. 10 10 RM
97 97 M&L forming contraction joints (dummy) 65mm deep X10mm wide, filled with sealing compound of Grade 'A' complete all as specified and directed. 5 10 RM
98 98 M&L forming contraction joints (dummy) 50mm deep X10mm wide, filled with sealing compound of Grade 'A' complete all as specified and directed. 6 10 RM
99 99 M&L for rendering 15 mm thick on other than fair face of brick works or concrete surfaces of walls with cement mortar (1:6) finished the surfaces even and smooth without using extra cement complete all as specified and directed. \n 45 SQM
100 100 M&L for rendering 15mm thick in cement mortar (1:4) on brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed. 267 SQM
101 101 M&L for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cement mortar (1:4) mixing with WPC as manufacturer's instructions all as per manufacturing Instructions, finished the surfaces even & smooth without using extra cement complete all as specified and directed. \n(Note : WPC will be measured and paid separately) 236 SQM
102 102 M&L for rendering 5mm thick in cement mortar (1:3) on ceiling surfaces, finished fair and even complete all as specified and directed. 30 SQM
103 103 M&L for rendering 10mm thick in cement mortar (1:3) on fair faces on brick or concrete surfaces, finished fair and even complete all as specified and directed. 30 SQM
104 104 M&L for rendering 15mm thick cement mortar (1:3) to including using water proofing compound @2% by weight of cement, finished even and smooth without using extra cement all as specified and directed.\n(NOTE: WPC shall be measured and paid separately) 40 SQM
105 105 M&L for applying three coats of white wash on surface of wall including preparation of new plastered surface complete all as specified and directed. 200 SQM
106 106 M&L for applying three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and directed. 34 SQM
107 107 M&L for applying two coats of oil emulsion distemper over a coat of alkaline resistant primer over and including 2mm thick wall care putty after preparation of new/old plastered surfaces of walls complete all as specified and directed. 66 SQM
108 108 M&L for applying two coats of oil emulsion distemper over a coat of alkaline resistant primer after preparation of newly plastered surfaces of walls complete all as specified and directed. 45 SQM
109 109 M&L for applying two coats of cement based paint over a coat of alkali resistance primer on newly plastered surface of walls including preparation of surface complete all as specified and directed. 175 SQM
110 110 M&L for applying two coats of synthetic enamel paint over and including a coat of red oxide primer after preparation of new steel surfaces of any description over 10cm width or girth complete all as specified and directed. 156 SQM
111 111 M&L for preparing surfaces of steel and iron work, new or old treating small articles such as strip, covers, gully gratings, hold fast ends of post, beads of chowkats etc area tarred not exceeding 0.1 sqm and treated with tar or coal tar black paint complete all as specified and directed. 0.2 PER 100 NOS
112 112 M&L for applying one coat of synthetic enamel paint after preparation of old steel surfaces of any description over 10cm width or girth complete all as specified and directed. 4 SQM
113 113 S&F for 5.5mm thick sheet glass panes, ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares exceeding 0.50 sqm in each pane complete all as specified and directed. 26.65 SQM
114 114 S&F for 5.5mm thick sheet glass panes, ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares not exceeding 0.50 sqm in each pane complete all as specified and directed. 5.2 SQM
115 115 S&F for 15mm dia bib taps, fancy type, cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferule, chromium plated with long screw type fixed complete all as specified and directed. 10 EACH
116 116 S&F for 15 mm dia angular stop valve cast copper alloy, chromium plated, screwed down high pressure, with capstan head screwed both ends for iron pipes or for unions of fancy type fixed complete all as specified and directed . 10 EACH
117 117 S&F for 15 mm bore stop valve (concealed), fancy type chromium plated with long shank and cup cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. 2 EACH
118 118 S&F for 20mm dia gun metal gate valves with iron wheel head screwed both ends for iron pipes or for unions pipes, fixed complete all as specified and directed. 6 EACH
119 119 S&F for 25mm dia gun metal gate valves with iron wheel head screwed both ends for iron pipes or for unions pipes, fixed complete all as specified and directed. 1 EACH
120 120 S&F for 15mm dia pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with letter 'HOT' or 'COLD' with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and directed. 3 EACH
121 121 S&F for 125mm size brass chromium plated shower roses with arms, swivel joints, including fixing to steel pipe or union complete all as specified and directed. 2 EACH
122 122 S&F for 15mm dia tubes (medium grade) galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, wall etc complete all as specified and directed. 110 RM
123 123 S&F for 20mm dia tubes (medium grade) galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, wall etc complete all as specified and directed. 258 RM
124 124 S&F for 25mm dia tubes (medium grade) galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, wall etc (surface or concealed type) including taking up or down old tube and connection complete all as specified and directed. 21 RM
125 125 S&F for brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flanges including brackets complete all as specified and directed. 4 EACH
126 126 S&F for glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 2 EACH
127 127 S&F for chromium plated toilet paper holder with stainless steel flap fixed to walls with chromium plated brass screw complete all as specified and directed. 2 EACH
128 128 S&F for 125mm health faucet (ABS) with rubbit cleaning system, one meter long PVC flexible tube for 15mm dia and ABS wall hook complete all as specified and directed. 1 EACH
129 129 S&F for PVC connection pipe 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. 8 EACH
130 130 S&F for urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms) complete all specified and directed. 2 EACH
131 131 S&F for 10 Ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete all as specified and directed. 3 EACH
132 132 S&F for vitreous china wash basin, white, flat back, size 550 X 400mm, excluding taps, chain and plug and porcelain stopper but including 32mm dia PVC waste pipe, brackets (02 Nos), 32mm size full threaded brass chromium plated waste coupling etc and cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. 3 EACH
133 133 S&F for vitreous china squatting pan 'Orissa' pattern, size 580x440mm white, with integral foot rests with P or S trap (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete including making good to floors with PCC bedding (1:5:10) type E2 using 40mm nominal brick ballast and connection to trap with cement mortar all as specified, and making good to floor complete all as specified and directed. 1 EACH
134 134 S&F for vitreous china wash down water closet pan (pedestal pattern) white with 'P' or 'S' trap type (excluding flushing cistern & flush pipe) including connection to trap with 110mm PVC (SWR) connection and lip ring & to flushing pipe, anti-syphonage pipe out in and including white seat cover etc. complete all as specified and directed. 2 EACH
135 135 S&F for vitreous china urinals, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal plugs with and including 60 mm long brass scres, pointing around urinal back in cement, fixing flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.\n 2 EACH
136 136 S&F for vitreous china oval type counter top wash hand basin, white, size 560X410X145mm including 32 mm dia CP waste coupling full threaded and 32 mm dia PVC waste pipe complete all as specified and directed. 6 EACH
137 137 S&F for 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. 5 EACH
138 138 S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. 10 RM
139 139 S&F for 75 mm bore PVC (SWR) bends any radius complete all as specified and directed. 5 EACH
140 140 S&F for 75 mm bore PVC (SWR) bends any radius provided with access door complete all as specified and directed. 5 EACH
141 141 S&F for 75mm bore PVC(SWR) junction single, (single T) equal or unequal providing access door complete all as specified and directed. 4 EACH
142 142 S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floor complete all as specified and directed. 12 RM
143 143 S&F for 110 mm bore PVC (SWR) bends any radius provided with access door complete all as specified and directed. 1 EACH
144 144 S&F for 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door complete all as specified and directed. 2 EACH
145 145 S&F for 110 mm bore PVC(SWR) junction single, (single T) equal or unequal providing access door complete all as specified and directed. 2 EACH
146 146 S&F for 100 mm bore PVC (SWR) vent cowl complete all as specified and directed. 1 EACH
147 147 S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. 2 EACH
148 148 S&F for 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board on commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 3 EACH
149 149 S&F for 500 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) multi layer (three layer), ISI Marked hoisted and fixed in position with cover of tank with its locking arrangement, making hole for inlet, outlet and overflow connection complete all as specified in SSR Part-I all and directed. 2 EACH
150 150 S&F for 1000 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) multi layer, (three layer) ISI Marked hoisted and fixed in position with cover of tank with its locking arrangement, making hole for inlet, outlet and overflow connection, including 20mm ball valve high pressure of PTMT (minimum weight 210 gms) complete all as specified in SSR Part-I all as specified and directed. 13 EACH
151 151 S&F for 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe & fixed (minimum weight 210 gms) complete all as specified and directed. 2 EACH
152 152 S&F for 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to wall or in floors etc. as in outlet pipe for WHB, urinal etc. complete all as specified and directed. 10 RM
153 153 M&L for cutting into existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching as required dia of pipe 150 mm complete all as specified and directed 1 EACH PIPE
154 154 S&F for 32mm dia waste fittings, brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks & fly nuts, flanged end bedded in red lead cement & other end fixed complete all as specified and directed. 1 EACH
155 155 M&L for 200 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. 3.5 RM
156 156 M&L for PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in concrete bed to drain pipe 150mm bore including packing under and haunching against the side of pipe after they are laid and tested complete all as specified and directed. 120 RM
157 157 M&L for 150mm bore salt glazed stone ware drain pipe grade 'A' laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed. 127 RM
158 158 S&F for salt glazed stone ware gully trap of size 150mmX150mm square or round mouthed type including jointing to drain pipe in CM (1:1) complete all as specified and directed. 6 EACH
159 159 S&F for LLDPE septic tank designed to carry sewage and sludge water, excavation in any type of soil. PCC (1:4:8) below foundation, vent shaft etc for 25 users as per manufacturer’s instructions complete all as specified and directed. 1 EACH JOB
160 160 M&L for sokage wells excavation, in any type of soil, foundation in PCC (1:3:6) , walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M-25/SFRC cover, interconnecting pipes of RCC/CWC complete with brick bats of size 1.8m dia X 3.00m effective depth complete all as specified and directed. 1 EACH JOB
161 161 M&L for point wiring (concealed) complete with 1.5 sqmm PVC insulated, FR-LSH type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top, bottom, side/back wall knockout for conduit entry from any direction made out of 1.60mm thick and 50mm depth suitable for fixing of modular top cover , blanking plate as per numbers of switch modules, modular switches, sockets, fan regulators, red colour indicator, blank plates etc as approved coloures modular accessories of suitable modules and including 1.5 Sqmm PVC insulated multistranded FR-LSH type unsheathed (Green colour), single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surfaces and applying white/colour wash/distemper after applying putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular box, top cover plate, blank plate, MS box, screws, washers and all modular electrical fixtures are to be used same make/brand only and shall be deemed in to included in quoted rate only.)
162 161.01 One light point controlled by one switch . 11 PER POINT
163 161.02 One exhaust fan point controlled by one switch . 2 PER POINT
164 161.03 One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board . 1 PER POINT
165 161.04 One 5 pin 6 amps socket point controlled by one 6 amps switch on same board . 1 PER POINT
166 162 All as per Item No.161.00 here-in-before but point wiring with 2.5sqmm PVC insulated multistranded flexible unsheathed copper conductor FR-LSH and earth conductor of size 2.50 sqmm PVC insulated multistranded flexible copper conductor FR-LSH of 3 pin, 15/16 Amps socket outlet on independent board complete all as specified and directed .
167 162.01 One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on independent board. 2 PER POINT
168 162.02 One 3 pin 15/16 amps socket outlet point controlled by one 15/16 amps switch on same board with other switches. 2 PER POINT
169 163 S&F for modular type switch 10 Amps, single pole, 1 way, 1 module, 240V, AC, ISI Marked complete all as specified and directed. 15 EACH
170 164 S&F for modular type switch 16 Amps, single pole, 1way, 1/2 module, 240V, AC, ISI marked complete all as specified and directed. 4 EACH
171 165 S&F for modular type socket shuttered type 5/6 Amps, 3 pin combined 2 module, 240 V, AC, ISI marked complete all as specified and directed. 2 EACH
172 166 S&F for modular type socket 6/16 Amps, 6 pin combined shutter socket, 2 module with light indication, 240 V, AC, ISI marked complete all as specified and directed. 4 EACH
173 167 S&F for red colour lighting indicator lamp 6 Amps, single pole, 240volts, AC, 50 Hz suitable for 1 module ISI Marked complete all as specified and directed. 1 EACH
174 168 S&F for angle lamp holder, insulated body with back plate for batten fittings in and including LED lamp 10 watts complete all as specified and directed.\n(Make: Philips/Havells/Crompton Greaves as approved) 1 EACH
175 169 S&F for ceiling rose , surface bakelite 65X50mm, three terminal, PVC/polycarbonate body complete all as specified and directed. 12 EACH
176 170 S&F for decorative box type 20 watt/22 watt LED fitting of fire retardant engineering grade complete with all accessories internally pre-wired, connecting up with and including three core sheathed flexible conductor cable of 0.50 Sqmm size and including mounted on PVC/Wooden round/square blocks-02 Nos including removing old unserviceable light fittings complete all as specified and directed.\n(Make - Havells Cat No REGALBATTENT8UPTO1 x 22WDSBSWH/Crompton Greaves cat No : DMLN1LT8-16 for fittings and make - Crompton Greaves Cat No LTT8-20 /Havells Cat No PHOTONULTRAE2.01213T8SSTL20WLED865SPC as approved for LED lamp as approved) 8 EACH
177 171 S&F for decorative type surface mounted 1X6 watts LED light fitting with LED lamps including fixing arrangements at any height with nuts, screws and washers and connected to ceiling rose and including removing old unserviceable fittings complete all as specified and directed.\n (Make: Crompton cat No.LCDEP-06-CDL / Havells cat No EDGEPRORDDLR6WLED857S as approved) 2 EACH
178 172 S&F for 36 watt LED street light fittings IP-65/66 pressure die cast housing LED lamp aluminium compact high power LED street light with heat resistant toughened glass with LED lamp and necessary connection with suitable size copper cable complete all as specified and directed . \n(Make : Crompton Greaves Cat No LSTS-36-CDL-M/ Bajaj Cat No BRTFG 36W LED as approved) 4 EACH
179 173 Supply, fabricated and fixing of street light bracket made out of GI pipe 40mm dia medium grade bent to shape of 1.2 mtr long as directed including clamps made out of 40 mm x 6 mm flat iron for fixing bracket suitable for steel tubular poles including nuts and bolts, washers and other connected items of required size including painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. 4 EACH
180 174 S&F powder coated sheet metal enclosure acrylic door 240 volts AC, SPN distribution board 8 way for flush mounting with 100amps copper busbar, neutral bar, earth bar and MCB incomer of rating upto 100Amps, MCB SPN/DP and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface & colour coat complete and all as specified and directed. \n(Make: Legrand Cat No. 5076 21 8 way / Hager cat No.VYS08D / L&T Cat No.DBSPN008GD as approved) 1 EACH
181 175 S&F for MCB, SP, 6 Amps to 32 Amps , 'C' series, 240 Volt, 10KA, 50 Hz, ISI marked complete all as specified and directed\n(Make: L&T /Havells/Legrand as approved) 6 EACH
182 176 Supply only MCB SPN 32 to 40 Amps, 10 KA, 'C' series, AC, 240Volts, 50Hz , ISI marked complete all as specified and directed.\n(Make: L&T /Havells/Legrand as approved) 1 EACH
183 177 S&F for aluminium busbar chamber in sheet metal enclosure of current rating capacity 100 amps, 4way, 415 volts with necessary fixing arrangements such as hole fasteners/screws, bolts, nuts and washers etc and making good the disturbed surfaces area complete all as specified and as directed.\n(Make:- Havells/Standard/Hager as approved) 1 EACH
184 178 M&L for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directly in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 5 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade, GI funnel with wire mesh including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber (1:3:6) type C1, of size 45X 45X 45 CM, RCC cover (1:2:4) type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.\n(Galvanised iron wire of 4mm dia upto 7.5m including testing consider in this item). 1 EACH JOB
185 179 S&F for metallic type exhaust fans AC single phase 230/240 V of size 300 mm sweep, 900 RPM with louver and necessary connection and testing including cutting the existing wall surfaces of brick/stone masonry and making the hole of any height for fixing the exhaust fan with nuts, bolts and washers after grouting in PCC including mild steel jalli and wooden frame for avoid insects complete all as specified and directed.\n(Make : Havells model No Turbo Force SP 300mm-900RPM/Standard model No : 300mm-900RPM as approved) 2 EACH
186 180 M&L for XLPE insulated, LT armoured electric cable with aluminium stranded conductor 1100 volts grade, cross-sectional area 16 sqmm, 2 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands, nuts, bolts and washers etc and testing complete all as specified and directed.\n(NOTE: Excavation/earth work, sand cushioning, cable cover/brick shall be measured and paid separately if required) 100 RM
187 181 M&L for brick covering with width equal to length of brick as protection to cable with well burnt sub class ‘B’ bricks of size 250mm x 125mm x 75mm laid dry flat complete all as specified and directed . 875 EACH
188 182 M&L for GI pipe 40mm dia (light grade) complete with all fittings in trenches, road/culvert crossing, on wall, floors, on roof, on pole for cable protection complete all as specified and directed. 12 RM
189 183 M&L for boring holes horizontally under road without damaging the surface of road (minimum 1.0m bellow the road surfaces) with the help of GI tubing of any dia not exceeding 80mm dia for passing of UG cable complete all as specified and directed. 12 RM
190 184 M&L for sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep including required watering and consolidation after laying and stretching the cable complete all as specified and directed. 10 CUM
191 185 Fixing only wall split air condition units indoor and outdoor complete with 2 Nos bracket (powder coated) with all accessories complete all as specified and directed.\n(Note: Split AC indoor and outdoor unit will be issued under Schedule 'B' as free for fixing only) 2 EACH
192 186 M&L for sub main wiring (surface) complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, FRLSH type, PVC insulated, unsheathed, flexible, multi stranded colour coded cables drawn through in and including rigid PVC conduit of size 20 mm dia medium grade (MMS) with all connected accessories such as Bend, Tee, Elbow, Short pieces etc in wall/roofs/floors and including one run of 4.0 sqmm (green colour) single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat and applying putty after taking down existing sub-main wiring of any type/size from wall and making good disturbed surface complete all as specified and directed. \n(Note : Two run of 4.0 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of 20mm dia PVC conduit shall be measured as one unit) 121 RM
193 187 S&F for sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete including one single pole, MCB 10 Amp, 240Volts, 'C' series, 10KA, ISI marked complete all as specified and directed. 16 EACH
194 188 S&F for PVC connection pipe 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed. 7 EACH
195 189 S&F for 15mm bore stop valves fancy type chromium plated , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed . 9 EACH
196 190 S&F for 20 mm bore stop valves fancy type chromium plated , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed . 8 EACH
197 191 Cutting the existing steel tubing 15mm dia/20mm dia for alteration or adding with new tee of required size including screwing existing tube in position without taking through the tube complete. 13 EACH
198 192 Supply, install and commissioning of vehicle washing pump (working pressure 32 Kg/M2, Motor power 3 HP) complete all as specified and directed. 1 EACH JOB
199 193 Supply, install and commissioning of Zexter double distiliation water plant, capacity 4.0 Ltrs/Hr complete all as specified and directed. 1 EACH JOB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail